From 5343eaf89a1fb4e4f5a88ace3dee9cfa1354deeb Mon Sep 17 00:00:00 2001 From: brickbots Date: Tue, 11 Jun 2019 15:56:06 -0700 Subject: [Keymap] Adding personal keymap / clarifying default keymap readme (#6119) * Adding led support for Plaid * Adding led support for Plaid * Update readme.md Fixing bad markdown * Adding my personal keymap * Clarifying LED instructions / formatting --- keyboards/plaid/keymaps/brickbots/readme.md | 36 +++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 keyboards/plaid/keymaps/brickbots/readme.md (limited to 'keyboards/plaid/keymaps/brickbots/readme.md') diff --git a/keyboards/plaid/keymaps/brickbots/readme.md b/keyboards/plaid/keymaps/brickbots/readme.md new file mode 100644 index 0000000000..48a12fa8bb --- /dev/null +++ b/keyboards/plaid/keymaps/brickbots/readme.md @@ -0,0 +1,36 @@ +# Brickbots keymap for plaid +Original copyright 2019 Takuya Urakawa (dm9records.com) +LED Support added by Richard Sutherland (rich@brickbots.com) + +This layout is based on the Planck layout, with esc/tab swapped and an extra +ctrl key in the bottom left corner. It includes an adjust layer (6) +accessible by holding the lower and raise modifiers (MO3 and MO4) together. +The adjustment layer is used to set the behavior of the two LEDs: + +**Modifier Mode:** +Activates when any modifier (shift, alt, os, MO) key is held +down. LED turns off when key is release + +**Blinkinlights Mode:** +Random chance of state change on each keystroke. + +**Keypress Mode:** +On for any keypress as long as the key is pressed + +**Carriage Mode:** +Turns on when enter is pressed, turns off when any next key is pressed + +To set the behavior of an LED, and save it to eeprom, hold the +raise/lower keys together to access the adjust layer, then use +the keys indicated below to set the behaviors + +* q = Toggle Red LED state, deactivates any other modes +* w = Toggle Green LED state, deactivates any other modes +* e = Set RED LED to modifier mode +* r = Set GREEN LED to modifier mode +* t = Set RED LED to Blinkinlights mode +* y = set GREEN LED to Blinkinlights mode +* u = set RED LED to Keypress mode +* i = set GREEN LED to Keypress mode +* o = set RED LED to Carriage mode +* p = set GREEN LED to Carriage mode -- cgit v1.2.3