From ced8142847e7c6a1e0e260017131e34e3da1b0ff Mon Sep 17 00:00:00 2001 From: Evgenii Vilkov Date: Fri, 30 Dec 2022 01:53:31 +0100 Subject: [Keyboard] Add Pica40 (#19220) Co-authored-by: Drashna Jaelre --- keyboards/pica40/readme.md | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 keyboards/pica40/readme.md (limited to 'keyboards/pica40/readme.md') diff --git a/keyboards/pica40/readme.md b/keyboards/pica40/readme.md new file mode 100644 index 0000000000..c9efb58d92 --- /dev/null +++ b/keyboards/pica40/readme.md @@ -0,0 +1,29 @@ +# pica40 + +![pica40](https://i.imgur.com/CKImjAPh.jpg) + +A family of 40-key split ortholinear keyboards with rotary encoder. + +- Keyboard Maintainer: [zzeneg](https://github.com/zzeneg) +- Hardware Supported: Pica40 PCBs, Pro Micro (rev1), XIAO RP2040/nRF52840 (rev2) +- Hardware Availability: [GitHub](https://github.com/zzeneg/pica40) + +Make example for this keyboard (after setting up your build environment): + + make pica40:default + make pica40/rev1:default + +Flashing example for this keyboard: + + make pica40:default:flash + make pica40/rev1:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +- **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +- **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.3