From dea23720e67d95278830a1172dac57a4e502a050 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Wed, 29 Dec 2021 07:57:22 -0300 Subject: [Keyboard] Add Mode Eighty M80v2 PCB support (#15486) Co-authored-by: Ryan --- keyboards/mode/m80v1/readme.md | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 keyboards/mode/m80v1/readme.md (limited to 'keyboards/mode/m80v1/readme.md') diff --git a/keyboards/mode/m80v1/readme.md b/keyboards/mode/m80v1/readme.md new file mode 100644 index 0000000000..5435a02e61 --- /dev/null +++ b/keyboards/mode/m80v1/readme.md @@ -0,0 +1,38 @@ +# Mode Eighty V1 PCB QMK firmware + +![MODE80](https://i.imgur.com/26uzM3yl.jpg)\ +[Image Gallery](https://imgur.com/t/mechanicalkeyboards/8Uf6c2m?nc=1) + +The Mode80 is a tenkeyless high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/). + +* Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim) +* Hardware Supported: proprietary PCB using STM32F072 controller +* Hardware Availability: the Mode Eighty V1 was discontinued in 2021 in favour of its second revisions. You can still buy hardware (PCBs and plates) at the Mode Designs website. + +## How to flash + +### Enter bootloader + +The DFU state in the bootloader can be accessed in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout) + +## Compile firmware + +After accessing the DFU state in your PCB, build the default layout using: + + make mode/m80v1/m80h:default # Hotswap + make mode/m80v1/m80s:default # Soldered + +Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox. + +## Compile and flash + +After accessing the DFU state in your PCB, you can compile-and-flash automatically usind `dfu-util` through + + make mode/m80v1/m80h:default:flash # Hotswap + make mode/m80v1/m80s:default:flash # Soldered + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3