From 01736a502e8f2900bde229a086a4ab03513f6781 Mon Sep 17 00:00:00 2001 From: climbalima Date: Fri, 18 Nov 2016 23:40:34 -0500 Subject: just saving --- keyboards/maxipad/config.h | 113 ++++++++------------------------------------- 1 file changed, 19 insertions(+), 94 deletions(-) (limited to 'keyboards/maxipad/config.h') diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..a056e4963b 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -24,124 +24,49 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot +#define MANUFACTURER wootpatoot #define PRODUCT maxipad #define DESCRIPTION A custom keyboard - /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +// Planck PCB default pin-out +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#ifdef USE_PRO_MICRO + #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } + #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #else + #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } + #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #endif /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ +/* define if matrix has ghost */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ +/* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. -- cgit v1.2.3 From 0f71c81df833a282250ecc4e66034320e40b208e Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:37:41 -0500 Subject: having trouble with conflicts --- keyboards/maxipad/config.h | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'keyboards/maxipad/config.h') diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index 4377a892e9..d7a5ef5646 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -32,20 +32,6 @@ along with this program. If not, see . #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -<<<<<<< HEAD -// Planck PCB default pin-out -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#ifdef USE_PRO_MICRO - #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } - #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } - #define UNUSED_PINS - #else - #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } - #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } - #define UNUSED_PINS - #endif -======= /* * Keyboard Matrix Assignments * @@ -65,7 +51,6 @@ along with this program. If not, see . //#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } //#define UNUSED_PINS ->>>>>>> 102a830bbdb302eb0951ec7910ab7c9feae272d1 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -- cgit v1.2.3