From 3a0f11eb277ab719b312547981a0b0db958fbc87 Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 19 Mar 2020 12:33:17 +1100 Subject: Set MCU for some F103 boards (#8459) --- keyboards/jm60/rules.mk | 45 ++++++--------------------------------------- 1 file changed, 6 insertions(+), 39 deletions(-) (limited to 'keyboards/jm60') diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk index ed6431b653..a513461fc8 100644 --- a/keyboards/jm60/rules.mk +++ b/keyboards/jm60/rules.mk @@ -1,41 +1,9 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F1xx +# MCU name +MCU = STM32F103 -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC MCU_LDSCRIPT = jm60_bootloader - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f1xx - -# Board: it should exist either in /os/hal/boards/ -# or /boards BOARD = JM60_BOARD -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m3 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 -OPT_DEFS = - # Build Options # comment out to disable the options. # @@ -51,10 +19,9 @@ CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = no VISUALIZER_ENABLE = no -#LED_DRIVER = is31fl3731c -#LED_WIDTH = 16 -#LED_HEIGHT = 5 - - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +# project specific files +SRC = matrix.c \ + led.c -- cgit v1.2.3