From da9bb590551e4e40552f301852074dffccd2c29d Mon Sep 17 00:00:00 2001 From: zvecr Date: Mon, 8 Apr 2019 19:35:47 +0100 Subject: [Keyboard] Refactor jj4x4 to current standards (#5567) * Refactor 4x4 in line with current ps2avrgb template * Add backlight pwm bodge till #4324 lands * Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID --- keyboards/jj4x4/backlight.c | 213 ------------------------------- keyboards/jj4x4/backlight_custom.h | 15 --- keyboards/jj4x4/breathing_custom.h | 140 -------------------- keyboards/jj4x4/config.h | 25 ++-- keyboards/jj4x4/i2c.c | 104 --------------- keyboards/jj4x4/i2c.h | 25 ---- keyboards/jj4x4/jj4x4.c | 61 ++------- keyboards/jj4x4/jj4x4.h | 10 +- keyboards/jj4x4/keymaps/default/keymap.c | 89 +++++++++---- keyboards/jj4x4/rules.mk | 42 +++--- keyboards/jj4x4/usbconfig.h | 4 +- 11 files changed, 122 insertions(+), 606 deletions(-) delete mode 100644 keyboards/jj4x4/backlight.c delete mode 100644 keyboards/jj4x4/backlight_custom.h delete mode 100644 keyboards/jj4x4/breathing_custom.h delete mode 100644 keyboards/jj4x4/i2c.c delete mode 100644 keyboards/jj4x4/i2c.h (limited to 'keyboards/jj4x4') diff --git a/keyboards/jj4x4/backlight.c b/keyboards/jj4x4/backlight.c deleted file mode 100644 index fbd241fa9d..0000000000 --- a/keyboards/jj4x4/backlight.c +++ /dev/null @@ -1,213 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#include "backlight.h" -#include "quantum.h" - -#include -#include - -#include "backlight_custom.h" -#include "breathing_custom.h" - -// DEBUG -#include -#include - -// Port D: digital pins of the AVR chipset -#define NUMLOCK_PORT (1 << 0) // D0 -#define CAPSLOCK_PORT (1 << 1) // D1 -#define BACKLIGHT_PORT (1 << 4) // D4 -#define SCROLLLOCK_PORT (1 << 6) // D6 - -#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64 -#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default - -#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask - -#define PWM_MAX 0xFF -#define TIMER_TOP 255 // 8 bit PWM - -extern backlight_config_t backlight_config; - -/** - * References - * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation - * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b - * Timers: http://www.avrbeginners.net/architecture/timers/timers.html - * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/ - * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware - */ - -// @Override -// turn LEDs on and off depending on USB caps/num/scroll lock states. -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - // turn on - DDRD |= NUMLOCK_PORT; - PORTD |= NUMLOCK_PORT; - } else { - // turn off - DDRD &= ~NUMLOCK_PORT; - PORTD &= ~NUMLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRD |= CAPSLOCK_PORT; - PORTD |= CAPSLOCK_PORT; - } else { - DDRD &= ~CAPSLOCK_PORT; - PORTD &= ~CAPSLOCK_PORT; - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - DDRD |= SCROLLLOCK_PORT; - PORTD |= SCROLLLOCK_PORT; - } else { - DDRD &= ~SCROLLLOCK_PORT; - PORTD &= ~SCROLLLOCK_PORT; - } -} - -#ifdef BACKLIGHT_ENABLE - -// sets up Timer 1 for 8-bit PWM -void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE - // default 8 bit mode - TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH - TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW - - // clear output compare value A - // outb(OCR1AH, 0); - // outb(OCR1AL, 0); - - // clear output comparator registers for B - OCR1BH = 0; // outb(OCR1BH, 0); - OCR1BL = 0; // outb(OCR1BL, 0); -} - -bool is_init = false; -void timer1Init(void) { - // timer1SetPrescaler(TIMER1PRESCALE) - // set to DIV/64 - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE; - - // reset TCNT1 - TCNT1H = 0; // outb(TCNT1H, 0); - TCNT1L = 0; // outb(TCNT1L, 0); - - // TOIE1: Timer Overflow Interrupt Enable (Timer 1); - TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1); - - is_init = true; -} - -void timer1UnInit(void) { - // set prescaler back to NONE - (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP - - // disable timer overflow interrupt - TIMSK &= ~_BV(TOIE1); // overflow bit? - - setPWM(0); - - is_init = false; -} - - -// handle TCNT1 overflow -//! Interrupt handler for tcnt1 overflow interrupt -ISR(TIMER1_OVF_vect, ISR_NOBLOCK) -{ - // sei(); - // handle breathing here - #ifdef BACKLIGHT_BREATHING - if (is_breathing()) { - custom_breathing_handler(); - } - #endif - - // TODO call user defined function -} - -// enable timer 1 PWM -// timer1PWMBOn() -void timer1PWMBEnable(void) { - // turn on channel B (OC1B) PWM output - // set OC1B as non-inverted PWM - TCCR1A |= _BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -// disable timer 1 PWM -// timer1PWMBOff() -void timer1PWMBDisable(void) { - TCCR1A &= ~_BV(COM1B1); - TCCR1A &= ~_BV(COM1B0); -} - -void enableBacklight(void) { - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high -} - -void disableBacklight(void) { - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low -} - -void startPWM(void) { - timer1Init(); - timer1PWMBEnable(); - enableBacklight(); -} - -void stopPWM(void) { - timer1UnInit(); - disableBacklight(); - timer1PWMBDisable(); -} - -void b_led_init_ports(void) { - /* turn backlight on/off depending on user preference */ - #if BACKLIGHT_ON_STATE == 0 - // DDRx register: sets the direction of Port D - // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input - PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low - #else - DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output - PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high - #endif - - timer1PWMSetup(); - startPWM(); - - #ifdef BACKLIGHT_BREATHING - breathing_enable(); - #endif -} - -void b_led_set(uint8_t level) { - if (level > BACKLIGHT_LEVELS) { - level = BACKLIGHT_LEVELS; - } - - setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS)); -} - -// called every matrix scan -void b_led_task(void) { - // do nothing for now -} - -void setPWM(uint16_t xValue) { - if (xValue > TIMER_TOP) { - xValue = TIMER_TOP; - } - OCR1B = xValue; // timer1PWMBSet(xValue); -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj4x4/backlight_custom.h b/keyboards/jj4x4/backlight_custom.h deleted file mode 100644 index 7210be840e..0000000000 --- a/keyboards/jj4x4/backlight_custom.h +++ /dev/null @@ -1,15 +0,0 @@ -/** - * Backlighting code for PS2AVRGB boards (ATMEGA32A) - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifndef BACKLIGHT_CUSTOM_H -#define BACKLIGHT_CUSTOM_H - -#include -void b_led_init_ports(void); -void b_led_set(uint8_t level); -void b_led_task(void); -void setPWM(uint16_t xValue); - -#endif // BACKLIGHT_CUSTOM_H diff --git a/keyboards/jj4x4/breathing_custom.h b/keyboards/jj4x4/breathing_custom.h deleted file mode 100644 index 71416b1b45..0000000000 --- a/keyboards/jj4x4/breathing_custom.h +++ /dev/null @@ -1,140 +0,0 @@ -/** - * Breathing effect code for PS2AVRGB boards (ATMEGA32A) - * Works in conjunction with `backlight.c`. - * - * Code adapted from `quantum.c` to register with the existing TIMER1 overflow - * handler in `backlight.c` instead of setting up its own timer. - * Kenneth A. (github.com/krusli | krusli.me) - */ - -#ifdef BACKLIGHT_ENABLE -#ifdef BACKLIGHT_BREATHING - -#include "backlight_custom.h" - -#ifndef BREATHING_PERIOD -#define BREATHING_PERIOD 6 -#endif - -#define breathing_min() do {breathing_counter = 0;} while (0) -#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0) - -// TODO make this share code with quantum.c - -#define BREATHING_NO_HALT 0 -#define BREATHING_HALT_OFF 1 -#define BREATHING_HALT_ON 2 -#define BREATHING_STEPS 128 - -static uint8_t breathing_period = BREATHING_PERIOD; -static uint8_t breathing_halt = BREATHING_NO_HALT; -static uint16_t breathing_counter = 0; - -static bool breathing = false; - -bool is_breathing(void) { - return breathing; -} - -// See http://jared.geek.nz/2013/feb/linear-led-pwm -static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t) y; - } -} - -void breathing_enable(void) { - breathing = true; - breathing_counter = 0; - breathing_halt = BREATHING_NO_HALT; - // interrupt already registered -} - -void breathing_pulse(void) { - if (get_backlight_level() == 0) - breathing_min(); - else - breathing_max(); - breathing_halt = BREATHING_HALT_ON; - // breathing_interrupt_enable(); - breathing = true; -} - -void breathing_disable(void) { - breathing = false; - // backlight_set(get_backlight_level()); - b_led_set(get_backlight_level()); // custom implementation of backlight_set() -} - -void breathing_self_disable(void) -{ - if (get_backlight_level() == 0) - breathing_halt = BREATHING_HALT_OFF; - else - breathing_halt = BREATHING_HALT_ON; -} - -void breathing_toggle(void) { - if (is_breathing()) - breathing_disable(); - else - breathing_enable(); -} - -void breathing_period_set(uint8_t value) -{ - if (!value) - value = 1; - breathing_period = value; -} - -void breathing_period_default(void) { - breathing_period_set(BREATHING_PERIOD); -} - -void breathing_period_inc(void) -{ - breathing_period_set(breathing_period+1); -} - -void breathing_period_dec(void) -{ - breathing_period_set(breathing_period-1); -} - -/* To generate breathing curve in python: - * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] - */ -static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - -// Use this before the cie_lightness function. -static inline uint16_t scale_backlight(uint16_t v) { - return v / BACKLIGHT_LEVELS * get_backlight_level(); -} - -void custom_breathing_handler(void) { - uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; - // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; - - if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || - ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) - { - // breathing_interrupt_disable(); - } - - setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U))); -} - -#endif // BACKLIGHT_BREATHING -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 3ecdc06eae..a8df46f016 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -19,7 +19,6 @@ along with this program. If not, see . #include "config_common.h" - #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D // TODO: share these strings with usbconfig.h @@ -36,16 +35,24 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_PIN D4 #define BACKLIGHT_LEVELS 12 -// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work +// #define BACKLIGHT_BREATHING // Requires #4324 to enable hardware pwm for atmega32a + +/* RGB underglow */ +// NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. +#define RGBLED_NUM 4 +#define RGBLIGHT_ANIMATIONS -#define TAPPING_TOGGLE 3 +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 #define NO_UART 1 -/* RGB underglow */ -// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. -// The same pin is used on the JJ40, at least. -#define RGBLED_NUM 5 -#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0. -#define RGBLIGHT_ANIMATIONS +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/jj4x4/i2c.c b/keyboards/jj4x4/i2c.c deleted file mode 100644 index c27f3e3d17..0000000000 --- a/keyboards/jj4x4/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/jj4x4/jj4x4.c b/keyboards/jj4x4/jj4x4.c index 6fbff7afba..265508b2d5 100644 --- a/keyboards/jj4x4/jj4x4.c +++ b/keyboards/jj4x4/jj4x4.c @@ -18,53 +18,26 @@ along with this program. If not, see . #include "jj4x4.h" -#include - -#include "action_layer.h" -#include "quantum.h" +#ifdef RGBLIGHT_ENABLE -#include "i2c.h" +#include +#include "i2c_master.h" +#include "rgblight.h" -#include "backlight.h" -#include "backlight_custom.h" +extern rgblight_config_t rgblight_config; -// for keyboard subdirectory level init functions -// @Override void matrix_init_kb(void) { + i2c_init(); // call user level keymaps, if any matrix_init_user(); } - -#ifdef BACKLIGHT_ENABLE -/// Overrides functions in `quantum.c` -void backlight_init_ports(void) { - b_led_init_ports(); -} - -void backlight_task(void) { - b_led_task(); -} - -void backlight_set(uint8_t level) { - b_led_set(level); -} -#endif - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - // custom RGB driver void rgblight_set(void) { if (!rgblight_config.enable) { - for (uint8_t i=0; i. #include "quantum.h" -void matrix_init_user(void); // TODO port this to other PS2AVRGB boards - +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ #define LAYOUT_ortho_4x4( \ K01, K02, K03, K04, \ K11, K12, K13, K14, \ diff --git a/keyboards/jj4x4/keymaps/default/keymap.c b/keyboards/jj4x4/keymaps/default/keymap.c index 51d4e7d618..a0b06ee92a 100644 --- a/keyboards/jj4x4/keymaps/default/keymap.c +++ b/keyboards/jj4x4/keymaps/default/keymap.c @@ -1,34 +1,73 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H +enum layers { + _BASE = 0, + _FN1, + _FN2, +}; -#define _QWERTY 0 - - +// Defines the keycodes used by our macros in process_record_user enum custom_keycodes { - QWERTY = SAFE_RANGE, + QMKBEST = SAFE_RANGE, + QMKURL }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Qwerty - * ,---------------------------. - * | A | B | C | D | - * +------+------+------+------| - * | E | F | G | H | - * +------+------+------+------| - * | I | J | K | L | - * +------+------+------+------| - * | M | N | O | P | - * ----------------------------' - */ -[_QWERTY] = LAYOUT_ortho_4x4( \ - KC_A, KC_B, KC_C, KC_D, \ - KC_E, KC_F, KC_G, KC_H, \ - KC_I, KC_J, KC_K, KC_L, \ - KC_M, KC_N, KC_O, KC_P \ -), -}; -// Loop -void matrix_scan_user(void) { - // Empty + [_BASE] = LAYOUT_ortho_4x4( + KC_PGUP, KC_HOME, KC_UP, KC_END , \ + KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, \ + MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, \ + MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT \ + ), + [_FN1] = LAYOUT_ortho_4x4( + KC_ESC, KC_P7, KC_P8, KC_P9, \ + KC_TAB, KC_P4, KC_P5, KC_P6, \ + KC_ENT, KC_P1, KC_P2, KC_P3, \ + _______, KC_P0, KC_P0, KC_DOT \ + ), + [_FN2] = LAYOUT_ortho_4x4( + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ + _______, _______, _______, RESET, \ + BL_STEP, _______, QMKBEST, QMKURL \ + ) + }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index d99aebbd20..3ac2cc0432 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -30,27 +30,29 @@ F_CPU = 12000000 # automatically (+60). See bootloader.mk for all options. BOOTLOADER = bootloadHID -# build options -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no -COMMAND_ENABLE = yes - -BACKLIGHT_ENABLE = yes -BACKLIGHT_CUSTOM_DRIVER = yes - -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -KEY_LOCK_ENABLE = yes - +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = i2c.c backlight.c +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +SRC += i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/jj4x4/usbconfig.h b/keyboards/jj4x4/usbconfig.h index ad97e7f0a3..a7653bde86 100644 --- a/keyboards/jj4x4/usbconfig.h +++ b/keyboards/jj4x4/usbconfig.h @@ -252,8 +252,8 @@ section at the end of this file). * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for * details. */ -#define USB_CFG_DEVICE_NAME 'j', 'j', '4', '0' -#define USB_CFG_DEVICE_NAME_LEN 4 +#define USB_CFG_DEVICE_NAME 'j', 'j', '4', 'x', '4' +#define USB_CFG_DEVICE_NAME_LEN 5 /* Same as above for the device name. If you don't want a device name, undefine * the macros. See the file USB-IDs-for-free.txt before you assign a name if * you use a shared VID/PID. -- cgit v1.2.3