From b867522f8cf90aef6f4531e669e35aba5ec0bf1c Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 31 Jan 2023 07:45:41 +1100 Subject: Clean up Force NKRO in config.h (#19718) --- keyboards/handwired/412_64/config.h | 21 -------------- keyboards/handwired/aranck/config.h | 21 -------------- keyboards/handwired/arrow_pad/config.h | 19 ------------- keyboards/handwired/atreus50/config.h | 21 -------------- keyboards/handwired/bolek/config.h | 21 -------------- keyboards/handwired/bstk100/config.h | 21 -------------- keyboards/handwired/cmd60/config.h | 21 -------------- keyboards/handwired/co60/rev1/config.h | 21 -------------- keyboards/handwired/cyberstar/config.h | 21 -------------- keyboards/handwired/dactyl_left/config.h | 21 -------------- keyboards/handwired/datahand/config.h | 29 ------------------- keyboards/handwired/evk/v1_3/config.h | 21 -------------- keyboards/handwired/fc200rt_qmk/config.h | 21 -------------- keyboards/handwired/fivethirteen/config.h | 21 -------------- keyboards/handwired/floorboard/config.h | 21 -------------- keyboards/handwired/frankie_macropad/config.h | 21 -------------- keyboards/handwired/gamenum/config.h | 21 -------------- keyboards/handwired/hacked_motospeed/config.h | 20 ------------- keyboards/handwired/heisenberg/config.h | 21 -------------- keyboards/handwired/hnah108/config.h | 21 -------------- keyboards/handwired/hnah40/config.h | 21 -------------- keyboards/handwired/ibm122m/config.h | 21 -------------- keyboards/handwired/jtallbean/split_65/config.h | 21 -------------- keyboards/handwired/juliet/config.h | 21 -------------- keyboards/handwired/leftynumpad/config.h | 20 ------------- keyboards/handwired/lemonpad/config.h | 21 -------------- keyboards/handwired/m40/5x5_macropad/config.h | 21 -------------- keyboards/handwired/magicforce61/config.h | 21 -------------- keyboards/handwired/magicforce68/config.h | 21 -------------- keyboards/handwired/mechboards_micropad/config.h | 21 -------------- keyboards/handwired/ms_sculpt_mobile/config.h | 12 -------- keyboards/handwired/mutepad/config.h | 19 ------------- keyboards/handwired/numpad20/config.h | 21 -------------- keyboards/handwired/oem_ansi_fullsize/config.h | 21 -------------- keyboards/handwired/ortho5x13/config.h | 21 -------------- keyboards/handwired/ortho5x14/config.h | 22 --------------- keyboards/handwired/owlet60/config.h | 21 -------------- keyboards/handwired/pilcrow/config.h | 21 -------------- keyboards/handwired/promethium/config.h | 33 ---------------------- keyboards/handwired/reclined/config.h | 22 --------------- keyboards/handwired/retro_refit/config.h | 12 -------- keyboards/handwired/sick68/config.h | 21 -------------- keyboards/handwired/snatchpad/config.h | 21 -------------- keyboards/handwired/split89/config.h | 21 -------------- keyboards/handwired/sticc14/config.h | 21 -------------- .../handwired/symmetric70_proto/promicro/config.h | 21 -------------- .../handwired/symmetric70_proto/proton_c/config.h | 21 -------------- keyboards/handwired/t111/config.h | 21 -------------- keyboards/handwired/tennie/config.h | 21 -------------- keyboards/handwired/terminus_mini/config.h | 21 -------------- keyboards/handwired/traveller/config.h | 21 -------------- keyboards/handwired/twadlee/tp69/config.h | 21 -------------- keyboards/handwired/woodpad/config.h | 21 -------------- keyboards/handwired/z150/config.h | 21 -------------- 54 files changed, 1132 deletions(-) (limited to 'keyboards/handwired') diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h index 9a0d76b250..e490d235c4 100644 --- a/keyboards/handwired/412_64/config.h +++ b/keyboards/handwired/412_64/config.h @@ -39,27 +39,6 @@ */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h index 4e8f97466f..52b16c04dd 100644 --- a/keyboards/handwired/aranck/config.h +++ b/keyboards/handwired/aranck/config.h @@ -88,27 +88,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h index 8083c3c2fd..5f72ba0d64 100644 --- a/keyboards/handwired/arrow_pad/config.h +++ b/keyboards/handwired/arrow_pad/config.h @@ -53,25 +53,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ #define FORCE_NKRO /* diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h index e71d8d12dc..c9760d8709 100644 --- a/keyboards/handwired/atreus50/config.h +++ b/keyboards/handwired/atreus50/config.h @@ -57,27 +57,6 @@ along with this program. If not, see . #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/bolek/config.h b/keyboards/handwired/bolek/config.h index 88fad57041..e7552c1910 100644 --- a/keyboards/handwired/bolek/config.h +++ b/keyboards/handwired/bolek/config.h @@ -76,27 +76,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/bstk100/config.h b/keyboards/handwired/bstk100/config.h index fffe4794a1..a0a10f87a5 100644 --- a/keyboards/handwired/bstk100/config.h +++ b/keyboards/handwired/bstk100/config.h @@ -85,27 +85,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h index d1d1ce9c02..5d0d90c3c0 100644 --- a/keyboards/handwired/cmd60/config.h +++ b/keyboards/handwired/cmd60/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/co60/rev1/config.h b/keyboards/handwired/co60/rev1/config.h index d56757be9e..d8d1d9172b 100644 --- a/keyboards/handwired/co60/rev1/config.h +++ b/keyboards/handwired/co60/rev1/config.h @@ -61,27 +61,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h index bb301af5fc..dfc315345a 100644 --- a/keyboards/handwired/cyberstar/config.h +++ b/keyboards/handwired/cyberstar/config.h @@ -67,27 +67,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/dactyl_left/config.h b/keyboards/handwired/dactyl_left/config.h index 0ca7247ec1..c4fda1e77c 100644 --- a/keyboards/handwired/dactyl_left/config.h +++ b/keyboards/handwired/dactyl_left/config.h @@ -77,27 +77,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/datahand/config.h b/keyboards/handwired/datahand/config.h index feb34dc2bb..b4c19f179b 100644 --- a/keyboards/handwired/datahand/config.h +++ b/keyboards/handwired/datahand/config.h @@ -30,37 +30,8 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - */ #define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - */ - /* * Command/Windows key option * diff --git a/keyboards/handwired/evk/v1_3/config.h b/keyboards/handwired/evk/v1_3/config.h index b30d0cd693..4d361a3d58 100644 --- a/keyboards/handwired/evk/v1_3/config.h +++ b/keyboards/handwired/evk/v1_3/config.h @@ -79,27 +79,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/fc200rt_qmk/config.h b/keyboards/handwired/fc200rt_qmk/config.h index 0517e9d4ce..a5169242ec 100644 --- a/keyboards/handwired/fc200rt_qmk/config.h +++ b/keyboards/handwired/fc200rt_qmk/config.h @@ -43,24 +43,3 @@ along with this program. If not, see . * This is userful for the Windows task manager shortcut (ctrl+shift+esc). */ // #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h index dcf1eb6ee1..d8165c79ea 100644 --- a/keyboards/handwired/fivethirteen/config.h +++ b/keyboards/handwired/fivethirteen/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h index 58e05885e4..ff4ad01028 100644 --- a/keyboards/handwired/floorboard/config.h +++ b/keyboards/handwired/floorboard/config.h @@ -75,27 +75,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/frankie_macropad/config.h b/keyboards/handwired/frankie_macropad/config.h index 2d5844b48b..54a3d8f990 100644 --- a/keyboards/handwired/frankie_macropad/config.h +++ b/keyboards/handwired/frankie_macropad/config.h @@ -81,27 +81,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h index dc5bb6114e..42678f7516 100644 --- a/keyboards/handwired/gamenum/config.h +++ b/keyboards/handwired/gamenum/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h index 9f3780b8f4..4a5d4166de 100644 --- a/keyboards/handwired/hacked_motospeed/config.h +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -76,26 +76,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h index a59682c481..c07a31bb2c 100644 --- a/keyboards/handwired/heisenberg/config.h +++ b/keyboards/handwired/heisenberg/config.h @@ -98,27 +98,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/hnah108/config.h b/keyboards/handwired/hnah108/config.h index 0dfce90bd4..27f20387dd 100644 --- a/keyboards/handwired/hnah108/config.h +++ b/keyboards/handwired/hnah108/config.h @@ -112,27 +112,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h index a6644a9a73..22e6addfd4 100644 --- a/keyboards/handwired/hnah40/config.h +++ b/keyboards/handwired/hnah40/config.h @@ -63,27 +63,6 @@ along with this program. If not, see . #define USB_MAX_POWER_CONSUMPTION 100 -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h index c08808f27e..093e3f722d 100644 --- a/keyboards/handwired/ibm122m/config.h +++ b/keyboards/handwired/ibm122m/config.h @@ -54,27 +54,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - #define AUDIO_PIN_ALT B6 #define AUDIO_PIN C6 diff --git a/keyboards/handwired/jtallbean/split_65/config.h b/keyboards/handwired/jtallbean/split_65/config.h index 123f97b2f2..fe21d816a3 100644 --- a/keyboards/handwired/jtallbean/split_65/config.h +++ b/keyboards/handwired/jtallbean/split_65/config.h @@ -78,27 +78,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h index e16c3f26a6..d787b9d68d 100644 --- a/keyboards/handwired/juliet/config.h +++ b/keyboards/handwired/juliet/config.h @@ -72,27 +72,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/leftynumpad/config.h b/keyboards/handwired/leftynumpad/config.h index 728356e191..b3c7020daa 100644 --- a/keyboards/handwired/leftynumpad/config.h +++ b/keyboards/handwired/leftynumpad/config.h @@ -53,26 +53,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/lemonpad/config.h b/keyboards/handwired/lemonpad/config.h index b0070fb84c..ce335bfab8 100644 --- a/keyboards/handwired/lemonpad/config.h +++ b/keyboards/handwired/lemonpad/config.h @@ -69,27 +69,6 @@ */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/m40/5x5_macropad/config.h b/keyboards/handwired/m40/5x5_macropad/config.h index 72c5689327..017c0de178 100644 --- a/keyboards/handwired/m40/5x5_macropad/config.h +++ b/keyboards/handwired/m40/5x5_macropad/config.h @@ -41,27 +41,6 @@ */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h index 3bde9b5b7b..84085d00bf 100644 --- a/keyboards/handwired/magicforce61/config.h +++ b/keyboards/handwired/magicforce61/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h index 4485d3309c..26bd23ac42 100644 --- a/keyboards/handwired/magicforce68/config.h +++ b/keyboards/handwired/magicforce68/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h index 77aa4ff526..2f080300ab 100644 --- a/keyboards/handwired/mechboards_micropad/config.h +++ b/keyboards/handwired/mechboards_micropad/config.h @@ -69,27 +69,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/ms_sculpt_mobile/config.h b/keyboards/handwired/ms_sculpt_mobile/config.h index ac63c64303..a69c98d384 100644 --- a/keyboards/handwired/ms_sculpt_mobile/config.h +++ b/keyboards/handwired/ms_sculpt_mobile/config.h @@ -31,18 +31,6 @@ along with this program. If not, see . /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/mutepad/config.h b/keyboards/handwired/mutepad/config.h index 85c4bfbeec..9cf91c2084 100644 --- a/keyboards/handwired/mutepad/config.h +++ b/keyboards/handwired/mutepad/config.h @@ -44,25 +44,6 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ #define FORCE_NKRO /* diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h index bff048f998..fdb01165ec 100644 --- a/keyboards/handwired/numpad20/config.h +++ b/keyboards/handwired/numpad20/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/oem_ansi_fullsize/config.h b/keyboards/handwired/oem_ansi_fullsize/config.h index 2f67369dae..c815130434 100644 --- a/keyboards/handwired/oem_ansi_fullsize/config.h +++ b/keyboards/handwired/oem_ansi_fullsize/config.h @@ -88,27 +88,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h index 7e6e108272..606027a5c2 100644 --- a/keyboards/handwired/ortho5x13/config.h +++ b/keyboards/handwired/ortho5x13/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/ortho5x14/config.h b/keyboards/handwired/ortho5x14/config.h index ef27bcd611..f97ded0a4f 100644 --- a/keyboards/handwired/ortho5x14/config.h +++ b/keyboards/handwired/ortho5x14/config.h @@ -54,28 +54,6 @@ along with this program. If not, see . //#define PERMISSIVE_HOLD -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/owlet60/config.h b/keyboards/handwired/owlet60/config.h index 109d5f229e..407a2e7506 100644 --- a/keyboards/handwired/owlet60/config.h +++ b/keyboards/handwired/owlet60/config.h @@ -87,27 +87,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h index 73a6b132ae..ffe3f5b3c3 100644 --- a/keyboards/handwired/pilcrow/config.h +++ b/keyboards/handwired/pilcrow/config.h @@ -49,27 +49,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index cac34bd342..6785c5d86a 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -53,39 +53,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ // #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* key combination for command */ #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT) | MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL))) diff --git a/keyboards/handwired/reclined/config.h b/keyboards/handwired/reclined/config.h index 869988168d..0606be9b1b 100644 --- a/keyboards/handwired/reclined/config.h +++ b/keyboards/handwired/reclined/config.h @@ -25,28 +25,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h index 0cb96f2fee..6c6be97805 100644 --- a/keyboards/handwired/retro_refit/config.h +++ b/keyboards/handwired/retro_refit/config.h @@ -43,18 +43,6 @@ along with this program. If not, see . /* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ #define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* remap magic keys */ #define MAGIC_KEY_LOCK BSLS diff --git a/keyboards/handwired/sick68/config.h b/keyboards/handwired/sick68/config.h index 5dc5fff2a1..7117113e7e 100644 --- a/keyboards/handwired/sick68/config.h +++ b/keyboards/handwired/sick68/config.h @@ -77,27 +77,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/snatchpad/config.h b/keyboards/handwired/snatchpad/config.h index 9bc2d95827..ebb9946508 100644 --- a/keyboards/handwired/snatchpad/config.h +++ b/keyboards/handwired/snatchpad/config.h @@ -74,27 +74,6 @@ */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/split89/config.h b/keyboards/handwired/split89/config.h index eec9f3e92f..28123f807a 100644 --- a/keyboards/handwired/split89/config.h +++ b/keyboards/handwired/split89/config.h @@ -92,27 +92,6 @@ COLS = number of cols per side which curently needs to be equal so there are bla */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/sticc14/config.h b/keyboards/handwired/sticc14/config.h index a4018263ba..cbb658a89c 100644 --- a/keyboards/handwired/sticc14/config.h +++ b/keyboards/handwired/sticc14/config.h @@ -75,27 +75,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/symmetric70_proto/promicro/config.h b/keyboards/handwired/symmetric70_proto/promicro/config.h index a2048ff8d8..7e2c5cc541 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/config.h +++ b/keyboards/handwired/symmetric70_proto/promicro/config.h @@ -81,27 +81,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/symmetric70_proto/proton_c/config.h b/keyboards/handwired/symmetric70_proto/proton_c/config.h index 3c4acb08d4..705fd660bc 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/config.h +++ b/keyboards/handwired/symmetric70_proto/proton_c/config.h @@ -89,27 +89,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/t111/config.h b/keyboards/handwired/t111/config.h index 1391e0d4fe..329730876d 100644 --- a/keyboards/handwired/t111/config.h +++ b/keyboards/handwired/t111/config.h @@ -37,27 +37,6 @@ along with this program. If not, see . /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index d1d61f65f2..082ddec6b0 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -80,27 +80,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h index 0e456cbd72..37b98c32e9 100644 --- a/keyboards/handwired/terminus_mini/config.h +++ b/keyboards/handwired/terminus_mini/config.h @@ -55,27 +55,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * rules.mk for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/traveller/config.h b/keyboards/handwired/traveller/config.h index 08dd705cff..40902df53d 100644 --- a/keyboards/handwired/traveller/config.h +++ b/keyboards/handwired/traveller/config.h @@ -70,27 +70,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h index 75e46799b8..47d73d05ba 100644 --- a/keyboards/handwired/twadlee/tp69/config.h +++ b/keyboards/handwired/twadlee/tp69/config.h @@ -78,27 +78,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/woodpad/config.h b/keyboards/handwired/woodpad/config.h index 9f3dd349f2..462ec2bbd9 100644 --- a/keyboards/handwired/woodpad/config.h +++ b/keyboards/handwired/woodpad/config.h @@ -70,27 +70,6 @@ along with this program. If not, see . */ //#define GRAVE_ESC_CTRL_OVERRIDE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/z150/config.h b/keyboards/handwired/z150/config.h index 2532342260..103b7e8080 100644 --- a/keyboards/handwired/z150/config.h +++ b/keyboards/handwired/z150/config.h @@ -38,27 +38,6 @@ along with this program. If not, see . /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - /* * Feature disable options * These options are also useful to firmware size reduction. -- cgit v1.2.3