From 61b61161478ebe1a65fc4b9a9efc0f887a342767 Mon Sep 17 00:00:00 2001 From: zwnk Date: Tue, 14 Aug 2018 00:23:11 -0300 Subject: Keyboard: Dactyl manuform 5x6 added and working (#3627) * mouse layer keys shifted * mouse layer keys shifted * manuform 5x6 added * mouse layer keys shifted * manuform 5x6 added * dactyl_manuform 5x6 keymap added * reorg. dactyl manuform folder * removed LAYOUTS = ortho_4x12 for 4x5 * Rows and Cols in config.h fixed * MASTER_LEFT * 5x6 matrix fixed * keymap updated * removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD --- keyboards/handwired/dactyl_manuform/4x5/config.h | 97 +++++ .../dactyl_manuform/4x5/dactyl_manuform.c | 23 + .../dactyl_manuform/4x5/dactyl_manuform.h | 71 ++++ .../dactyl_manuform/4x5/keymaps/default/config.h | 37 ++ .../dactyl_manuform/4x5/keymaps/default/keymap.c | 129 ++++++ .../dactyl_manuform/4x5/keymaps/default/rules.mk | 3 + .../dactyl_manuform/4x5/keymaps/dvorak/config.h | 37 ++ .../dactyl_manuform/4x5/keymaps/dvorak/keymap.c | 129 ++++++ .../dactyl_manuform/4x5/keymaps/dvorak/rules.mk | 3 + keyboards/handwired/dactyl_manuform/4x5/readme.md | 161 +++++++ keyboards/handwired/dactyl_manuform/4x5/rules.mk | 68 +++ keyboards/handwired/dactyl_manuform/5x6/config.h | 97 +++++ .../dactyl_manuform/5x6/dactyl_manuform.c | 23 + .../dactyl_manuform/5x6/dactyl_manuform.h | 47 +++ .../dactyl_manuform/5x6/keymaps/impstyle/config.h | 28 ++ .../dactyl_manuform/5x6/keymaps/impstyle/keymap.c | 75 ++++ keyboards/handwired/dactyl_manuform/5x6/readme.md | 142 +++++++ keyboards/handwired/dactyl_manuform/5x6/rules.mk | 67 +++ keyboards/handwired/dactyl_manuform/config.h | 97 ----- .../handwired/dactyl_manuform/dactyl_manuform.c | 23 - .../handwired/dactyl_manuform/dactyl_manuform.h | 69 --- .../handwired/dactyl_manuform/eeprom-lefthand.eep | 2 - .../handwired/dactyl_manuform/eeprom-righthand.eep | 2 - keyboards/handwired/dactyl_manuform/i2c.c | 162 ------- keyboards/handwired/dactyl_manuform/i2c.h | 49 --- .../dactyl_manuform/keymaps/default/config.h | 37 -- .../dactyl_manuform/keymaps/default/keymap.c | 129 ------ .../dactyl_manuform/keymaps/default/rules.mk | 3 - .../dactyl_manuform/keymaps/dvorak/config.h | 37 -- .../dactyl_manuform/keymaps/dvorak/keymap.c | 129 ------ .../dactyl_manuform/keymaps/dvorak/rules.mk | 3 - keyboards/handwired/dactyl_manuform/matrix.c | 465 --------------------- keyboards/handwired/dactyl_manuform/readme.md | 161 ------- keyboards/handwired/dactyl_manuform/rules.mk | 75 ---- keyboards/handwired/dactyl_manuform/serial.c | 228 ---------- keyboards/handwired/dactyl_manuform/serial.h | 26 -- keyboards/handwired/dactyl_manuform/split_util.c | 86 ---- keyboards/handwired/dactyl_manuform/split_util.h | 20 - 38 files changed, 1237 insertions(+), 1803 deletions(-) create mode 100644 keyboards/handwired/dactyl_manuform/4x5/config.h create mode 100644 keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c create mode 100644 keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h create mode 100644 keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h create mode 100644 keyboards/handwired/dactyl_manuform/4x5/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/4x5/keymaps/default/rules.mk create mode 100644 keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h create mode 100644 keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/rules.mk create mode 100644 keyboards/handwired/dactyl_manuform/4x5/readme.md create mode 100644 keyboards/handwired/dactyl_manuform/4x5/rules.mk create mode 100644 keyboards/handwired/dactyl_manuform/5x6/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c create mode 100644 keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/5x6/readme.md create mode 100644 keyboards/handwired/dactyl_manuform/5x6/rules.mk delete mode 100644 keyboards/handwired/dactyl_manuform/config.h delete mode 100644 keyboards/handwired/dactyl_manuform/dactyl_manuform.c delete mode 100644 keyboards/handwired/dactyl_manuform/dactyl_manuform.h delete mode 100644 keyboards/handwired/dactyl_manuform/eeprom-lefthand.eep delete mode 100644 keyboards/handwired/dactyl_manuform/eeprom-righthand.eep delete mode 100644 keyboards/handwired/dactyl_manuform/i2c.c delete mode 100644 keyboards/handwired/dactyl_manuform/i2c.h delete mode 100644 keyboards/handwired/dactyl_manuform/keymaps/default/config.h delete mode 100644 keyboards/handwired/dactyl_manuform/keymaps/default/keymap.c delete mode 100644 keyboards/handwired/dactyl_manuform/keymaps/default/rules.mk delete mode 100644 keyboards/handwired/dactyl_manuform/keymaps/dvorak/config.h delete mode 100644 keyboards/handwired/dactyl_manuform/keymaps/dvorak/keymap.c delete mode 100644 keyboards/handwired/dactyl_manuform/keymaps/dvorak/rules.mk delete mode 100644 keyboards/handwired/dactyl_manuform/matrix.c delete mode 100644 keyboards/handwired/dactyl_manuform/readme.md delete mode 100644 keyboards/handwired/dactyl_manuform/rules.mk delete mode 100644 keyboards/handwired/dactyl_manuform/serial.c delete mode 100644 keyboards/handwired/dactyl_manuform/serial.h delete mode 100644 keyboards/handwired/dactyl_manuform/split_util.c delete mode 100644 keyboards/handwired/dactyl_manuform/split_util.h (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h new file mode 100644 index 0000000000..8917630e4a --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/config.h @@ -0,0 +1,97 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tshort +#define PRODUCT Dactyl-Manuform +#define DESCRIPTION A split keyboard for the cheap makers + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 10 +#define MATRIX_COLS 5 + +// wiring of each half +#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +// #define MATRIX_COL_PINS { B5, B4, E6, D7, C6 } +#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 } + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* mouse config */ +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Enables This makes it easier for fast typists to use dual-function keys */ +#define PERMISSIVE_HOLD + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c new file mode 100644 index 0000000000..17caecb4fd --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c @@ -0,0 +1,23 @@ +#include "dactyl_manuform.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h new file mode 100644 index 0000000000..7e126d3017 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h @@ -0,0 +1,71 @@ +#ifndef REV2_H +#define REV2_H + +#include "dactyl_manuform.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#ifndef FLIP_HALF +#define LAYOUT( \ + L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ + L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ + L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ + L31, L32, R32, R33, \ + L33, L34, R30, R31, \ + L44, L43, R41, R40, \ + L42, L41, R43, R42 \ + ) \ + { \ + { L00, L01, L02, L03, L04 }, \ + { L10, L11, L12, L13, L14 }, \ + { L20, L21, L22, L23, L24 }, \ + { KC_NO, L31, L32, L33, L34 }, \ + { KC_NO, L41, L42, L43, L44 }, \ +\ + { R04, R03, R02, R01, R00 }, \ + { R14, R13, R12, R11, R10 }, \ + { R24, R23, R22, R21, R20 }, \ + { KC_NO, R33, R32, R31, R30 }, \ + { KC_NO, R43, R42, R41, R40 } \ + } +#else + + + +#define LAYOUT( \ + L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ + L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ + L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ + L31, L32, R32, R33, \ + L33, L34, R30, R31, \ + L44, L43, R41, R40, \ + L42, L41, R43, R42 \ + ) \ + { \ + { R04, R03, R02, R01, R00 }, \ + { R14, R13, R12, R11, R10 }, \ + { R24, R23, R22, R21, R20 }, \ + { KC_NO, R33, R32, R31, R30 }, \ + { KC_NO, R43, R42, R41, R40 }, \ +\ + { L00, L01, L02, L03, L04 }, \ + { L10, L11, L12, L13, L14 }, \ + { L20, L21, L22, L23, L24 }, \ + { KC_NO, L31, L32, L33, L34 }, \ + { KC_NO, L41, L42, L43, L44 } \ +\ + } +#endif +#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h new file mode 100644 index 0000000000..216917ed71 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h @@ -0,0 +1,37 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +// #define MASTER_RIGHT +#define EE_HANDS + +#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/keymap.c new file mode 100644 index 0000000000..24c02215ee --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/keymap.c @@ -0,0 +1,129 @@ +#include "dactyl_manuform.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _BASE 0 +#define _RAISE 1 +#define _LOWER 2 + +// Fillers to make layering more clear + +#define ____ KC_TRNS + +#define SFT_ESC SFT_T(KC_ESC) +#define CTL_BSPC CTL_T(KC_BSPC) +#define ALT_SPC ALT_T(KC_SPC) +#define SFT_ENT SFT_T(KC_ENT) + +#define KC_ML KC_MS_LEFT +#define KC_MR KC_MS_RIGHT +#define KC_MU KC_MS_UP +#define KC_MD KC_MS_DOWN +#define KC_MB1 KC_MS_BTN1 +#define KC_MB2 KC_MS_BTN1 + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Base (qwerty) + * ,----------------------------------, ,----------------------------------, + * | q | w | e | r | t | | y | u | i | o | p | + * |------+------+------+------+------| |-------------+------+------+------| + * | a | s | d | f | g | | h | j | k | l | ; | + * |------+------+------+------+------| |------|------+------+------+------| + * | z | x | c | v | b | | n | m | , | . | ' | + * |------+------+------+-------------, ,-------------+------+------+------, + * | [ | ] | | - | = | + * '------+------'-------------' '-------------'------+------' + * | ESC | BS | | SPACE|ENTER | + * | + | + | | + | + | + * | SHIFT| CTRL | | ALT |SHIFT | + * '------+------' '------+------' + * '------+------' '------+------' + * | TAB | HOME | | END | DEL | + * '------+------' '------+------' + * | Lower| ~ | | GUI | Raise| + * '------+------' '------+------' + */ + +[_BASE] = LAYOUT( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_QUOT, \ + KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, \ + SFT_ESC, CTL_BSPC, ALT_SPC, SFT_ENT, \ + KC_TAB, KC_HOME, KC_END, KC_DEL, \ + RAISE, KC_GRV, KC_LGUI, LOWER +), + +/* Raise + * ,----------------------------------, ,----------------------------------, + * | | | mup | | | | VOL+ | | up | | PgUp | + * |------+------+------+------+------| |-------------+------+------+------| + * | | mleft| mdown|mright| | | MUTE | left | down |right | PgDn | + * |------+------+------+------+------| |------|------+------+------+------| + * | | | | | | | VOL- | / | \ | ? | | | + * |------+------+------+-------------, ,-------------+------+------+------, + * | | | | mbtn |mbtn2 | + * '------+------'-------------' '-------------'------+------' + * | | | | | | + * | | | | | | + * | | | | | | + * '------+------' '------+------' + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + */ + +[_RAISE] = LAYOUT( \ + ____, ____, KC_MU, ____, ____, KC_VOLU, ____, KC_UP, ____, KC_PGUP, \ + ____, KC_ML, KC_MD, KC_MR, ____, KC_MUTE, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDOWN, \ + ____, ____, ____, ____, ____, KC_VOLD, KC_SLSH, KC_BSLS, KC_QUES, KC_PIPE, \ + ____, ____, KC_MB1, KC_MB2, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____ \ +), +/* Lower + * ,----------------------------------, ,----------------------------------, + * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | + * |------+------+------+------+------| |-------------+------+------+------| + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 10 | + * |------+------+------+------+------| |------|------+------+------+------| + * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + * |------+------+------+-------------, ,-------------+------+------+------, + * | F11 | F12 | | - | = | + * '------+------'-------------' '-------------'------+------' + * | | | | | | + * | | | | | | + * | | | | | | + * '------+------' '------+------' + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + */ + +[_LOWER] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F11, KC_F12, ____, ____, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____ \ +) +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h new file mode 100644 index 0000000000..216917ed71 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h @@ -0,0 +1,37 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +// #define MASTER_RIGHT +#define EE_HANDS + +#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c new file mode 100644 index 0000000000..0a1c90b6bf --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/keymap.c @@ -0,0 +1,129 @@ +#include "dactyl_manuform.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _BASE 0 +#define _RAISE 1 +#define _LOWER 2 + +// Fillers to make layering more clear + +#define ____ KC_TRNS + +#define SFT_ESC SFT_T(KC_ESC) +#define CTL_BSPC CTL_T(KC_BSPC) +#define ALT_SPC ALT_T(KC_SPC) +#define SFT_ENT SFT_T(KC_ENT) + +#define KC_ML KC_MS_LEFT +#define KC_MR KC_MS_RIGHT +#define KC_MU KC_MS_UP +#define KC_MD KC_MS_DOWN +#define KC_MB1 KC_MS_BTN1 +#define KC_MB2 KC_MS_BTN1 + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Base (dvorak) + * ,----------------------------------, ,----------------------------------, + * | ' | , | . | p | y | | f | g | c | r | l | + * |------+------+------+------+------| |-------------+------+------+------| + * | a | o | e | u | i | | d | h | t | n | s | + * |------+------+------+------+------| |------|------+------+------+------| + * | ; | q | j | k | x | | b | m | w | v | z | + * |------+------+------+-------------, ,-------------+------+------+------, + * | [ | ] | | - | = | + * '------+------'-------------' '-------------'------+------' + * | ESC | BS | | SPACE|ENTER | + * | + | + | | + | + | + * | SHIFT| CTRL | | ALT |SHIFT | + * '------+------' '------+------' + * '------+------' '------+------' + * | TAB | HOME | | END | DEL | + * '------+------' '------+------' + * | Lower| ~ | | GUI | Raise| + * '------+------' '------+------' + */ + +[_BASE] = LAYOUT( \ + KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, \ + KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, \ + KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, \ + KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, \ + SFT_ESC, CTL_BSPC, ALT_SPC, SFT_ENT, \ + KC_TAB, KC_HOME, KC_END, KC_DEL, \ + RAISE, KC_GRV, KC_LGUI, LOWER +), + +/* Raise + * ,----------------------------------, ,----------------------------------, + * | | | mup | | | | VOL+ | | up | | PgUp | + * |------+------+------+------+------| |-------------+------+------+------| + * | | mleft| mdown|mright| | | MUTE | left | down |right | PgDn | + * |------+------+------+------+------| |------|------+------+------+------| + * | | | | | | | VOL- | / | \ | ? | | | + * |------+------+------+-------------, ,-------------+------+------+------, + * | | | | mbtn |mbtn2 | + * '------+------'-------------' '-------------'------+------' + * | | | | | | + * | | | | | | + * | | | | | | + * '------+------' '------+------' + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + */ + +[_RAISE] = LAYOUT( \ + ____, ____, KC_MU, ____, ____, KC_VOLU, ____, KC_UP, ____, KC_PGUP, \ + ____, KC_ML, KC_MD, KC_MR, ____, KC_MUTE, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDOWN, \ + ____, ____, ____, ____, ____, KC_VOLD, KC_SLSH, KC_BSLS, KC_QUES, KC_PIPE, \ + ____, ____, KC_MB1, KC_MB2, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____ \ +), +/* Lower + * ,----------------------------------, ,----------------------------------, + * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | + * |------+------+------+------+------| |-------------+------+------+------| + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 10 | + * |------+------+------+------+------| |------|------+------+------+------| + * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + * |------+------+------+-------------, ,-------------+------+------+------, + * | F11 | F12 | | - | = | + * '------+------'-------------' '-------------'------+------' + * | | | | | | + * | | | | | | + * | | | | | | + * '------+------' '------+------' + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + * | | | | | | + * '------+------' '------+------' + */ + +[_LOWER] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F11, KC_F12, ____, ____, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____, \ + ____, ____, ____, ____ \ +) +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/readme.md b/keyboards/handwired/dactyl_manuform/4x5/readme.md new file mode 100644 index 0000000000..aab792f224 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/readme.md @@ -0,0 +1,161 @@ +Dactyl Manuform 4x5 +====== +the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. +![Imgur](https://i.imgur.com/7y0Vbyd.jpg) + + +## First Time Setup + +Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: + +``` +$ make handwired/dactyl_manuform/4x5:dvorak +``` + +You will see a lot of output and if everything worked correctly you will see the built hex file: + +``` +dactyl_manuform_4x5_dvorak.hex +``` + +If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: + +``` +$ make handwired/dactyl_manuform/4x5:YOUR_KEYMAP_NAME +``` + +If everything worked correctly you will see a file: + +``` +dactyl_manuform_4x5_YOUR_KEYMAP_NAME.hex +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. + +## Keymaps +Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. +### Qwerty and Dvorak +Qwerty base layer: +![Imgur](https://i.imgur.com/Yb5e7dS.png) +Dvorak base layer: +![Imgur](https://i.imgur.com/CpuZptB.png) +Both keymaps have the same Raise and Lower layers: +Raise Layer +![Imgur](https://i.imgur.com/nOqePK5.png) +Lower Layer +![Imgur](https://i.imgur.com/WSshkYc.png) + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable + +Alternatively, you can use any sort of cable and socket that has at least 3 +wires. If you want to use I2C to communicate between halves, you will need a +cable with at least 4 wires and 2x 4.7kΩ pull-up resistors + +Optional Hardware +----------------- +A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. + +Wiring +------ + +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. +PD0 on the ATmega32u4) between the two Pro Micros. + +Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro +and modify the `matrix.c` accordingly. + +The wiring for serial: + +![serial wiring](https://i.imgur.com/C3D1GAQ.png) + +The wiring for i2c: + +![i2c wiring](https://i.imgur.com/Hbzhc6E.png) + +The pull-up resistors may be placed on either half. It is also possible +to use 4 resistors and have the pull-ups in both halves, but this is +unnecessary in simple use cases. + +You can change your configuration between serial and i2c by modifying your `config.h` file. + +Notes on Software Configuration +------------------------------- + +the keymaps in here are for the 4x5 layout of the keyboard only. + +Flashing +------- +From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. +Example: `make lets_split/rev2:default:avrdude` + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk new file mode 100644 index 0000000000..99ac2880d5 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 = yes +USE_I2C = yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +SPLIT_KEYBOARD = yes + diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h new file mode 100644 index 0000000000..97495e9350 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/config.h @@ -0,0 +1,97 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tshort +#define PRODUCT Dactyl-Manuform +#define DESCRIPTION A split keyboard for the cheap makers + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 12 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } +#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 } + + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* mouse config */ +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Enables This makes it easier for fast typists to use dual-function keys */ +#define PERMISSIVE_HOLD + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c new file mode 100644 index 0000000000..17caecb4fd --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c @@ -0,0 +1,23 @@ +#include "dactyl_manuform.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h new file mode 100644 index 0000000000..5c1a4339bd --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h @@ -0,0 +1,47 @@ +#ifndef REV2_H +#define REV2_H + +#include "dactyl_manuform.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + + +#define LAYOUT_5x6(\ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ + L42, L43, R42, R43, \ + L44, L45, R40, R41, \ + L54, L55, R50, R51, \ + L52, L53, R52, R53 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { KC_NO, KC_NO, L42, L43, L44, L45 }, \ + { KC_NO, KC_NO, L52, L53, L54, L55 }, \ +\ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 }, \ + { R40, R41, R42, R43, KC_NO, KC_NO },\ + { R50, R51, R52, R53, KC_NO, KC_NO }, \ + } + +#endif diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h new file mode 100644 index 0000000000..1a7d1e0659 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h @@ -0,0 +1,28 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +//#define EE_HANDS +// Rows are doubled-up +#define MATRIX_ROWS 12 +#define MATRIX_COLS 6 + +#include "../../config.h" diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c new file mode 100644 index 0000000000..7dd9f7c869 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c @@ -0,0 +1,75 @@ +#include "dactyl_manuform.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +#define SFT_ESC SFT_T(KC_ESC) +#define CTL_BSPC CTL_T(KC_BSPC) +#define ALT_SPC ALT_T(KC_SPC) +#define SFT_ENT SFT_T(KC_ENT) + +#define KC_ML KC_MS_LEFT +#define KC_MR KC_MS_RIGHT +#define KC_MU KC_MS_UP +#define KC_MD KC_MS_DOWN +#define KC_MB1 KC_MS_BTN1 +#define KC_MB2 KC_MS_BTN1 +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +#define _______ KC_TRNS + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [_QWERTY] = LAYOUT_5x6( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), + + [_LOWER] = LAYOUT_5x6( + KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, + _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, + _______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, + _______,KC_PSCR, _______, KC_P0, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ +), + + [_RAISE] = LAYOUT_5x6( + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + + }; + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} diff --git a/keyboards/handwired/dactyl_manuform/5x6/readme.md b/keyboards/handwired/dactyl_manuform/5x6/readme.md new file mode 100644 index 0000000000..eb76a7150e --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/readme.md @@ -0,0 +1,142 @@ +Dactyl Manuform 5x6 +====== +the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. +![Imgur](https://i.imgur.com/7y0Vbyd.jpg) + + +## First Time Setup + +Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: + +``` +$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME +``` + +If everything worked correctly you will see a file: + +``` +dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. + +## Keymaps +Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. +### Impstyle + + + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable + +Alternatively, you can use any sort of cable and socket that has at least 3 +wires. If you want to use I2C to communicate between halves, you will need a +cable with at least 4 wires and 2x 4.7kΩ pull-up resistors + +Optional Hardware +----------------- +A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. + +Wiring +------ + +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. +PD0 on the ATmega32u4) between the two Pro Micros. + +Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro +and modify the `matrix.c` accordingly. + +The wiring for serial: + +![serial wiring](https://i.imgur.com/C3D1GAQ.png) + +The wiring for i2c: + +![i2c wiring](https://i.imgur.com/Hbzhc6E.png) + +The pull-up resistors may be placed on either half. It is also possible +to use 4 resistors and have the pull-ups in both halves, but this is +unnecessary in simple use cases. + +You can change your configuration between serial and i2c by modifying your `config.h` file. + +Notes on Software Configuration +------------------------------- + +the keymaps in here are for the 4x5 layout of the keyboard only. + +Flashing +------- +From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. +Example: `make lets_split/rev2:default:avrdude` + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/handwired/dactyl_manuform/5x6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/rules.mk new file mode 100644 index 0000000000..6b1201781a --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 = yes +USE_I2C = yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +SPLIT_KEYBOARD = yes \ No newline at end of file diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h deleted file mode 100644 index 8917630e4a..0000000000 --- a/keyboards/handwired/dactyl_manuform/config.h +++ /dev/null @@ -1,97 +0,0 @@ -/* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER tshort -#define PRODUCT Dactyl-Manuform -#define DESCRIPTION A split keyboard for the cheap makers - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 10 -#define MATRIX_COLS 5 - -// wiring of each half -#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } -// #define MATRIX_COL_PINS { B5, B4, E6, D7, C6 } -#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 } - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* mouse config */ -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Enables This makes it easier for fast typists to use dual-function keys */ -#define PERMISSIVE_HOLD - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c deleted file mode 100644 index 17caecb4fd..0000000000 --- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.c +++ /dev/null @@ -1,23 +0,0 @@ -#include "dactyl_manuform.h" - - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h deleted file mode 100644 index 3dc8405ff9..0000000000 --- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef REV2_H -#define REV2_H - -#include "dactyl_manuform.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - -//void promicro_bootloader_jmp(bool program); - -#ifndef FLIP_HALF -#define LAYOUT( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ - L31, L32, R32, R33, \ - L33, L34, R30, R31, \ - L44, L43, R41, R40, \ - L42, L41, R43, R42 \ - ) \ - { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { KC_NO, L31, L32, L33, L34 }, \ - { KC_NO, L41, L42, L43, L44 }, \ -\ - { R04, R03, R02, R01, R00 }, \ - { R14, R13, R12, R11, R10 }, \ - { R24, R23, R22, R21, R20 }, \ - { KC_NO, R33, R32, R31, R30 }, \ - { KC_NO, R43, R42, R41, R40 } \ - } -#else -#define LAYOUT( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ - L31, L32, R32, R33, \ - L33, L34, R30, R31, \ - L44, L43, R41, R40, \ - L42, L41, R43, R42 \ - ) \ - { \ - { R04, R03, R02, R01, R00 }, \ - { R14, R13, R12, R11, R10 }, \ - { R24, R23, R22, R21, R20 }, \ - { KC_NO, R33, R32, R31, R30 }, \ - { KC_NO, R43, R42, R41, R40 }, \ -\ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { KC_NO, L31, L32, L33, L34 }, \ - { KC_NO, L41, L42, L43, L44 } \ -\ - } -#endif - -#endif diff --git a/keyboards/handwired/dactyl_manuform/eeprom-lefthand.eep b/keyboards/handwired/dactyl_manuform/eeprom-lefthand.eep deleted file mode 100644 index bda23cdb6e..0000000000 --- a/keyboards/handwired/dactyl_manuform/eeprom-lefthand.eep +++ /dev/null @@ -1,2 +0,0 @@ -:0F000000000000000000000000000000000001F0 -:00000001FF diff --git a/keyboards/handwired/dactyl_manuform/eeprom-righthand.eep b/keyboards/handwired/dactyl_manuform/eeprom-righthand.eep deleted file mode 100644 index 549cd1ef0a..0000000000 --- a/keyboards/handwired/dactyl_manuform/eeprom-righthand.eep +++ /dev/null @@ -1,2 +0,0 @@ -:0F000000000000000000000000000000000000F1 -:00000001FF diff --git a/keyboards/handwired/dactyl_manuform/i2c.c b/keyboards/handwired/dactyl_manuform/i2c.c deleted file mode 100644 index 084c890c40..0000000000 --- a/keyboards/handwired/dactyl_manuform/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1< slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1< - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/handwired/dactyl_manuform/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/keymaps/default/config.h deleted file mode 100644 index 216917ed71..0000000000 --- a/keyboards/handwired/dactyl_manuform/keymaps/default/config.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -/* Use I2C or Serial, not both */ - -#define USE_SERIAL -// #define USE_I2C - -/* Select hand configuration */ - -// #define MASTER_LEFT -// #define MASTER_RIGHT -#define EE_HANDS - -#endif diff --git a/keyboards/handwired/dactyl_manuform/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/keymaps/default/keymap.c deleted file mode 100644 index 24c02215ee..0000000000 --- a/keyboards/handwired/dactyl_manuform/keymaps/default/keymap.c +++ /dev/null @@ -1,129 +0,0 @@ -#include "dactyl_manuform.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -#define _BASE 0 -#define _RAISE 1 -#define _LOWER 2 - -// Fillers to make layering more clear - -#define ____ KC_TRNS - -#define SFT_ESC SFT_T(KC_ESC) -#define CTL_BSPC CTL_T(KC_BSPC) -#define ALT_SPC ALT_T(KC_SPC) -#define SFT_ENT SFT_T(KC_ENT) - -#define KC_ML KC_MS_LEFT -#define KC_MR KC_MS_RIGHT -#define KC_MU KC_MS_UP -#define KC_MD KC_MS_DOWN -#define KC_MB1 KC_MS_BTN1 -#define KC_MB2 KC_MS_BTN1 - -#define RAISE MO(_RAISE) -#define LOWER MO(_LOWER) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Base (qwerty) - * ,----------------------------------, ,----------------------------------, - * | q | w | e | r | t | | y | u | i | o | p | - * |------+------+------+------+------| |-------------+------+------+------| - * | a | s | d | f | g | | h | j | k | l | ; | - * |------+------+------+------+------| |------|------+------+------+------| - * | z | x | c | v | b | | n | m | , | . | ' | - * |------+------+------+-------------, ,-------------+------+------+------, - * | [ | ] | | - | = | - * '------+------'-------------' '-------------'------+------' - * | ESC | BS | | SPACE|ENTER | - * | + | + | | + | + | - * | SHIFT| CTRL | | ALT |SHIFT | - * '------+------' '------+------' - * '------+------' '------+------' - * | TAB | HOME | | END | DEL | - * '------+------' '------+------' - * | Lower| ~ | | GUI | Raise| - * '------+------' '------+------' - */ - -[_BASE] = LAYOUT( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_QUOT, \ - KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, \ - SFT_ESC, CTL_BSPC, ALT_SPC, SFT_ENT, \ - KC_TAB, KC_HOME, KC_END, KC_DEL, \ - RAISE, KC_GRV, KC_LGUI, LOWER -), - -/* Raise - * ,----------------------------------, ,----------------------------------, - * | | | mup | | | | VOL+ | | up | | PgUp | - * |------+------+------+------+------| |-------------+------+------+------| - * | | mleft| mdown|mright| | | MUTE | left | down |right | PgDn | - * |------+------+------+------+------| |------|------+------+------+------| - * | | | | | | | VOL- | / | \ | ? | | | - * |------+------+------+-------------, ,-------------+------+------+------, - * | | | | mbtn |mbtn2 | - * '------+------'-------------' '-------------'------+------' - * | | | | | | - * | | | | | | - * | | | | | | - * '------+------' '------+------' - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - */ - -[_RAISE] = LAYOUT( \ - ____, ____, KC_MU, ____, ____, KC_VOLU, ____, KC_UP, ____, KC_PGUP, \ - ____, KC_ML, KC_MD, KC_MR, ____, KC_MUTE, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDOWN, \ - ____, ____, ____, ____, ____, KC_VOLD, KC_SLSH, KC_BSLS, KC_QUES, KC_PIPE, \ - ____, ____, KC_MB1, KC_MB2, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____ \ -), -/* Lower - * ,----------------------------------, ,----------------------------------, - * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | - * |------+------+------+------+------| |-------------+------+------+------| - * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 10 | - * |------+------+------+------+------| |------|------+------+------+------| - * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | - * |------+------+------+-------------, ,-------------+------+------+------, - * | F11 | F12 | | - | = | - * '------+------'-------------' '-------------'------+------' - * | | | | | | - * | | | | | | - * | | | | | | - * '------+------' '------+------' - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - */ - -[_LOWER] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_F11, KC_F12, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____ \ -) -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - diff --git a/keyboards/handwired/dactyl_manuform/keymaps/default/rules.mk b/keyboards/handwired/dactyl_manuform/keymaps/default/rules.mk deleted file mode 100644 index 457a3d01d4..0000000000 --- a/keyboards/handwired/dactyl_manuform/keymaps/default/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/handwired/dactyl_manuform/keymaps/dvorak/config.h b/keyboards/handwired/dactyl_manuform/keymaps/dvorak/config.h deleted file mode 100644 index 216917ed71..0000000000 --- a/keyboards/handwired/dactyl_manuform/keymaps/dvorak/config.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -/* Use I2C or Serial, not both */ - -#define USE_SERIAL -// #define USE_I2C - -/* Select hand configuration */ - -// #define MASTER_LEFT -// #define MASTER_RIGHT -#define EE_HANDS - -#endif diff --git a/keyboards/handwired/dactyl_manuform/keymaps/dvorak/keymap.c b/keyboards/handwired/dactyl_manuform/keymaps/dvorak/keymap.c deleted file mode 100644 index 0a1c90b6bf..0000000000 --- a/keyboards/handwired/dactyl_manuform/keymaps/dvorak/keymap.c +++ /dev/null @@ -1,129 +0,0 @@ -#include "dactyl_manuform.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -#define _BASE 0 -#define _RAISE 1 -#define _LOWER 2 - -// Fillers to make layering more clear - -#define ____ KC_TRNS - -#define SFT_ESC SFT_T(KC_ESC) -#define CTL_BSPC CTL_T(KC_BSPC) -#define ALT_SPC ALT_T(KC_SPC) -#define SFT_ENT SFT_T(KC_ENT) - -#define KC_ML KC_MS_LEFT -#define KC_MR KC_MS_RIGHT -#define KC_MU KC_MS_UP -#define KC_MD KC_MS_DOWN -#define KC_MB1 KC_MS_BTN1 -#define KC_MB2 KC_MS_BTN1 - -#define RAISE MO(_RAISE) -#define LOWER MO(_LOWER) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Base (dvorak) - * ,----------------------------------, ,----------------------------------, - * | ' | , | . | p | y | | f | g | c | r | l | - * |------+------+------+------+------| |-------------+------+------+------| - * | a | o | e | u | i | | d | h | t | n | s | - * |------+------+------+------+------| |------|------+------+------+------| - * | ; | q | j | k | x | | b | m | w | v | z | - * |------+------+------+-------------, ,-------------+------+------+------, - * | [ | ] | | - | = | - * '------+------'-------------' '-------------'------+------' - * | ESC | BS | | SPACE|ENTER | - * | + | + | | + | + | - * | SHIFT| CTRL | | ALT |SHIFT | - * '------+------' '------+------' - * '------+------' '------+------' - * | TAB | HOME | | END | DEL | - * '------+------' '------+------' - * | Lower| ~ | | GUI | Raise| - * '------+------' '------+------' - */ - -[_BASE] = LAYOUT( \ - KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, \ - KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, \ - KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, \ - KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, \ - SFT_ESC, CTL_BSPC, ALT_SPC, SFT_ENT, \ - KC_TAB, KC_HOME, KC_END, KC_DEL, \ - RAISE, KC_GRV, KC_LGUI, LOWER -), - -/* Raise - * ,----------------------------------, ,----------------------------------, - * | | | mup | | | | VOL+ | | up | | PgUp | - * |------+------+------+------+------| |-------------+------+------+------| - * | | mleft| mdown|mright| | | MUTE | left | down |right | PgDn | - * |------+------+------+------+------| |------|------+------+------+------| - * | | | | | | | VOL- | / | \ | ? | | | - * |------+------+------+-------------, ,-------------+------+------+------, - * | | | | mbtn |mbtn2 | - * '------+------'-------------' '-------------'------+------' - * | | | | | | - * | | | | | | - * | | | | | | - * '------+------' '------+------' - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - */ - -[_RAISE] = LAYOUT( \ - ____, ____, KC_MU, ____, ____, KC_VOLU, ____, KC_UP, ____, KC_PGUP, \ - ____, KC_ML, KC_MD, KC_MR, ____, KC_MUTE, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDOWN, \ - ____, ____, ____, ____, ____, KC_VOLD, KC_SLSH, KC_BSLS, KC_QUES, KC_PIPE, \ - ____, ____, KC_MB1, KC_MB2, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____ \ -), -/* Lower - * ,----------------------------------, ,----------------------------------, - * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | - * |------+------+------+------+------| |-------------+------+------+------| - * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 10 | - * |------+------+------+------+------| |------|------+------+------+------| - * | ! | @ | # | $ | % | | ^ | & | * | ( | ) | - * |------+------+------+-------------, ,-------------+------+------+------, - * | F11 | F12 | | - | = | - * '------+------'-------------' '-------------'------+------' - * | | | | | | - * | | | | | | - * | | | | | | - * '------+------' '------+------' - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - * | | | | | | - * '------+------' '------+------' - */ - -[_LOWER] = LAYOUT( \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_F11, KC_F12, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____, \ - ____, ____, ____, ____ \ -) -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - diff --git a/keyboards/handwired/dactyl_manuform/keymaps/dvorak/rules.mk b/keyboards/handwired/dactyl_manuform/keymaps/dvorak/rules.mk deleted file mode 100644 index 457a3d01d4..0000000000 --- a/keyboards/handwired/dactyl_manuform/keymaps/dvorak/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -ifndef QUANTUM_DIR - include ../../../../Makefile -endif diff --git a/keyboards/handwired/dactyl_manuform/matrix.c b/keyboards/handwired/dactyl_manuform/matrix.c deleted file mode 100644 index 904850d4d3..0000000000 --- a/keyboards/handwired/dactyl_manuform/matrix.c +++ /dev/null @@ -1,465 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -/* - * scan matrix - */ -#include -#include -#include -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" -#include "timer.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - -#if (DEBOUNCING_DELAY > 0) - static uint16_t debouncing_time; - static bool debouncing = false; -#endif - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#else -# error "Currently only supports 8 COLS" -#endif -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#define ERROR_DISCONNECT_COUNT 5 - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#if (DIODE_DIRECTION == COL2ROW) - static void init_cols(void); - static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); - static void unselect_rows(void); - static void select_row(uint8_t row); - static void unselect_row(uint8_t row); -#elif (DIODE_DIRECTION == ROW2COL) - static void init_rows(void); - static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); - static void unselect_cols(void); - static void unselect_col(uint8_t col); - static void select_col(uint8_t col); -#endif - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ -#ifdef DISABLE_JTAG - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1< 0) - bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); - - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } - -# else - read_cols_on_row(matrix+offset, current_row); -# endif - - } - -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } -# else - read_rows_on_col(matrix+offset, current_col); -# endif - - } -#endif - -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - debouncing = false; - } -# endif - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - uint8_t ret = _matrix_scan(); - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) -{ - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - - // Select the col pin to read (active low) - uint8_t pin = col_pins[col_index]; - uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); - - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -static void select_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void init_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) -{ - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) - { - - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) - { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - else - { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) - { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -static void select_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#endif diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md deleted file mode 100644 index 8b28757129..0000000000 --- a/keyboards/handwired/dactyl_manuform/readme.md +++ /dev/null @@ -1,161 +0,0 @@ -Dactyl Manuform -====== -the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. -![Imgur](https://i.imgur.com/7y0Vbyd.jpg) - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -``` -$ make dactyl_manuform:dvorak -``` - -You will see a lot of output and if everything worked correctly you will see the built hex file: - -``` -dactyl_manuform_dvorak.hex -``` - -If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: - -``` -$ make dactyl_manuform:YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -dactyl_manuform_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - -## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Qwerty and Dvorak -Qwerty base layer: -![Imgur](https://i.imgur.com/Yb5e7dS.png) -Dvorak base layer: -![Imgur](https://i.imgur.com/CpuZptB.png) -Both keymaps have the same Raise and Lower layers: -Raise Layer -![Imgur](https://i.imgur.com/nOqePK5.png) -Lower Layer -![Imgur](https://i.imgur.com/WSshkYc.png) - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - -The wiring for i2c: - -![i2c wiring](https://i.imgur.com/Hbzhc6E.png) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -You can change your configuration between serial and i2c by modifying your `config.h` file. - -Notes on Software Configuration -------------------------------- - -the keymaps in here are for the 4x5 layout of the keyboard only. - -Flashing -------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/handwired/dactyl_manuform/rules.mk b/keyboards/handwired/dactyl_manuform/rules.mk deleted file mode 100644 index 6c0949b540..0000000000 --- a/keyboards/handwired/dactyl_manuform/rules.mk +++ /dev/null @@ -1,75 +0,0 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c \ - ssd1306.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 = yes -USE_I2C = yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -LAYOUTS = ortho_4x12 diff --git a/keyboards/handwired/dactyl_manuform/serial.c b/keyboards/handwired/dactyl_manuform/serial.c deleted file mode 100644 index 74bcbb6bf6..0000000000 --- a/keyboards/handwired/dactyl_manuform/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include -#include -#include -#include -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/handwired/dactyl_manuform/serial.h b/keyboards/handwired/dactyl_manuform/serial.h deleted file mode 100644 index 15fe4db7b4..0000000000 --- a/keyboards/handwired/dactyl_manuform/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/handwired/dactyl_manuform/split_util.c b/keyboards/handwired/dactyl_manuform/split_util.c deleted file mode 100644 index 346cbc9089..0000000000 --- a/keyboards/handwired/dactyl_manuform/split_util.c +++ /dev/null @@ -1,86 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - timer_init(); -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1< -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif -- cgit v1.2.3 From feec8ad4694814ed8953c6f72798f51f39724af5 Mon Sep 17 00:00:00 2001 From: zwnk Date: Tue, 14 Aug 2018 14:54:22 -0300 Subject: Keyboard: Add default keymap for dactyl_manuform 5x6 (#3649) * mouse layer keys shifted * mouse layer keys shifted * manuform 5x6 added * mouse layer keys shifted * manuform 5x6 added * dactyl_manuform 5x6 keymap added * reorg. dactyl manuform folder * removed LAYOUTS = ortho_4x12 for 4x5 * Rows and Cols in config.h fixed * MASTER_LEFT * 5x6 matrix fixed * keymap updated * removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD * default keymap for dactyl_manuform 5x6 * Fixes for Dactyl Manuform * Add/update default keymap --- keyboards/handwired/dactyl_manuform/4x5/4x5.c | 23 ++++ keyboards/handwired/dactyl_manuform/4x5/4x5.h | 70 ++++++++++ keyboards/handwired/dactyl_manuform/4x5/config.h | 53 +------- .../dactyl_manuform/4x5/dactyl_manuform.c | 23 ---- .../dactyl_manuform/4x5/dactyl_manuform.h | 71 ----------- keyboards/handwired/dactyl_manuform/4x5/rules.mk | 49 +------ keyboards/handwired/dactyl_manuform/5x6/5x6.c | 23 ++++ keyboards/handwired/dactyl_manuform/5x6/5x6.h | 46 +++++++ keyboards/handwired/dactyl_manuform/5x6/config.h | 62 +-------- .../dactyl_manuform/5x6/dactyl_manuform.c | 23 ---- .../dactyl_manuform/5x6/dactyl_manuform.h | 47 ------- .../dactyl_manuform/5x6/keymaps/default/config.h | 27 ++++ .../dactyl_manuform/5x6/keymaps/default/keymap.c | 71 +++++++++++ .../dactyl_manuform/5x6/keymaps/impstyle/config.h | 5 +- .../dactyl_manuform/5x6/keymaps/impstyle/keymap.c | 26 ++-- keyboards/handwired/dactyl_manuform/5x6/rules.mk | 48 +------ keyboards/handwired/dactyl_manuform/config.h | 78 +++++++++++ .../handwired/dactyl_manuform/dactyl_manuform.c | 1 + .../handwired/dactyl_manuform/dactyl_manuform.h | 22 ++++ keyboards/handwired/dactyl_manuform/readme.md | 142 +++++++++++++++++++++ keyboards/handwired/dactyl_manuform/rules.mk | 66 ++++++++++ 21 files changed, 588 insertions(+), 388 deletions(-) create mode 100644 keyboards/handwired/dactyl_manuform/4x5/4x5.c create mode 100644 keyboards/handwired/dactyl_manuform/4x5/4x5.h delete mode 100644 keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c delete mode 100644 keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/5x6.c create mode 100644 keyboards/handwired/dactyl_manuform/5x6/5x6.h delete mode 100644 keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c delete mode 100644 keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/config.h create mode 100644 keyboards/handwired/dactyl_manuform/dactyl_manuform.c create mode 100644 keyboards/handwired/dactyl_manuform/dactyl_manuform.h create mode 100644 keyboards/handwired/dactyl_manuform/readme.md create mode 100644 keyboards/handwired/dactyl_manuform/rules.mk (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/4x5/4x5.c b/keyboards/handwired/dactyl_manuform/4x5/4x5.c new file mode 100644 index 0000000000..78c0fee819 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.c @@ -0,0 +1,23 @@ +#include "4x5.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/4x5/4x5.h b/keyboards/handwired/dactyl_manuform/4x5/4x5.h new file mode 100644 index 0000000000..b34d97adbf --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.h @@ -0,0 +1,70 @@ +#pragma once + +#include "dactyl_manuform.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#ifndef FLIP_HALF +#define LAYOUT( \ + L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ + L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ + L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ + L31, L32, R32, R33, \ + L33, L34, R30, R31, \ + L44, L43, R41, R40, \ + L42, L41, R43, R42 \ + ) \ + { \ + { L00, L01, L02, L03, L04 }, \ + { L10, L11, L12, L13, L14 }, \ + { L20, L21, L22, L23, L24 }, \ + { KC_NO, L31, L32, L33, L34 }, \ + { KC_NO, L41, L42, L43, L44 }, \ +\ + { R04, R03, R02, R01, R00 }, \ + { R14, R13, R12, R11, R10 }, \ + { R24, R23, R22, R21, R20 }, \ + { KC_NO, R33, R32, R31, R30 }, \ + { KC_NO, R43, R42, R41, R40 } \ + } +#else + + + +#define LAYOUT( \ + L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ + L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ + L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ + L31, L32, R32, R33, \ + L33, L34, R30, R31, \ + L44, L43, R41, R40, \ + L42, L41, R43, R42 \ + ) \ + { \ + { R04, R03, R02, R01, R00 }, \ + { R14, R13, R12, R11, R10 }, \ + { R24, R23, R22, R21, R20 }, \ + { KC_NO, R33, R32, R31, R30 }, \ + { KC_NO, R43, R42, R41, R40 }, \ +\ + { L00, L01, L02, L03, L04 }, \ + { L10, L11, L12, L13, L14 }, \ + { L20, L21, L22, L23, L24 }, \ + { KC_NO, L31, L32, L33, L34 }, \ + { KC_NO, L41, L42, L43, L44 } \ +\ + } +#endif + diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h index 8917630e4a..c8417a2f0f 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5/config.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -26,7 +25,6 @@ along with this program. If not, see . #define PRODUCT_ID 0x3060 #define DEVICE_VER 0x0001 #define MANUFACTURER tshort -#define PRODUCT Dactyl-Manuform #define DESCRIPTION A split keyboard for the cheap makers /* key matrix size */ @@ -45,53 +43,4 @@ along with this program. If not, see . /* number of backlight levels */ // #define BACKLIGHT_LEVELS 3 -/* mouse config */ -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Enables This makes it easier for fast typists to use dual-function keys */ -#define PERMISSIVE_HOLD - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c deleted file mode 100644 index 17caecb4fd..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c +++ /dev/null @@ -1,23 +0,0 @@ -#include "dactyl_manuform.h" - - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h deleted file mode 100644 index 7e126d3017..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef REV2_H -#define REV2_H - -#include "dactyl_manuform.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - -//void promicro_bootloader_jmp(bool program); - -#ifndef FLIP_HALF -#define LAYOUT( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ - L31, L32, R32, R33, \ - L33, L34, R30, R31, \ - L44, L43, R41, R40, \ - L42, L41, R43, R42 \ - ) \ - { \ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { KC_NO, L31, L32, L33, L34 }, \ - { KC_NO, L41, L42, L43, L44 }, \ -\ - { R04, R03, R02, R01, R00 }, \ - { R14, R13, R12, R11, R10 }, \ - { R24, R23, R22, R21, R20 }, \ - { KC_NO, R33, R32, R31, R30 }, \ - { KC_NO, R43, R42, R41, R40 } \ - } -#else - - - -#define LAYOUT( \ - L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ - L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ - L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ - L31, L32, R32, R33, \ - L33, L34, R30, R31, \ - L44, L43, R41, R40, \ - L42, L41, R43, R42 \ - ) \ - { \ - { R04, R03, R02, R01, R00 }, \ - { R14, R13, R12, R11, R10 }, \ - { R24, R23, R22, R21, R20 }, \ - { KC_NO, R33, R32, R31, R30 }, \ - { KC_NO, R43, R42, R41, R40 }, \ -\ - { L00, L01, L02, L03, L04 }, \ - { L10, L11, L12, L13, L14 }, \ - { L20, L21, L22, L23, L24 }, \ - { KC_NO, L31, L32, L33, L34 }, \ - { KC_NO, L41, L42, L43, L44 } \ -\ - } -#endif -#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk index 99ac2880d5..14b6e1e4e3 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk @@ -1,47 +1,3 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Build Options # change to "no" to disable the options, or define them in the Makefile in @@ -59,10 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 = yes -USE_I2C = yes + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -SPLIT_KEYBOARD = yes - diff --git a/keyboards/handwired/dactyl_manuform/5x6/5x6.c b/keyboards/handwired/dactyl_manuform/5x6/5x6.c new file mode 100644 index 0000000000..68fceffd92 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.c @@ -0,0 +1,23 @@ +#include "5x6.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/5x6/5x6.h b/keyboards/handwired/dactyl_manuform/5x6/5x6.h new file mode 100644 index 0000000000..cb225a2cf2 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.h @@ -0,0 +1,46 @@ +#pragma once + +#include "dactyl_manuform.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + + +#define LAYOUT_5x6(\ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ + L42, L43, R42, R43, \ + L44, L45, R40, R41, \ + L54, L55, R50, R51, \ + L52, L53, R52, R53 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { KC_NO, KC_NO, L42, L43, L44, L45 }, \ + { KC_NO, KC_NO, L52, L53, L54, L55 }, \ +\ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 }, \ + { R40, R41, R42, R43, KC_NO, KC_NO },\ + { R50, R51, R52, R53, KC_NO, KC_NO }, \ + } + + diff --git a/keyboards/handwired/dactyl_manuform/5x6/config.h b/keyboards/handwired/dactyl_manuform/5x6/config.h index 97495e9350..06ac02dfcb 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/config.h @@ -16,18 +16,12 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER tshort -#define PRODUCT Dactyl-Manuform -#define DESCRIPTION A split keyboard for the cheap makers + +#define PRODUCT Dactyl-Manuform (5x6) /* key matrix size */ // Rows are doubled-up @@ -45,53 +39,3 @@ along with this program. If not, see . /* number of backlight levels */ // #define BACKLIGHT_LEVELS 3 -/* mouse config */ -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Enables This makes it easier for fast typists to use dual-function keys */ -#define PERMISSIVE_HOLD - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c deleted file mode 100644 index 17caecb4fd..0000000000 --- a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.c +++ /dev/null @@ -1,23 +0,0 @@ -#include "dactyl_manuform.h" - - -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - diff --git a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h deleted file mode 100644 index 5c1a4339bd..0000000000 --- a/keyboards/handwired/dactyl_manuform/5x6/dactyl_manuform.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef REV2_H -#define REV2_H - -#include "dactyl_manuform.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - - -#ifdef USE_I2C -#include -#ifdef __AVR__ - #include - #include -#endif -#endif - -//void promicro_bootloader_jmp(bool program); - - -#define LAYOUT_5x6(\ - L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ - L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ - L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ - L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ - L42, L43, R42, R43, \ - L44, L45, R40, R41, \ - L54, L55, R50, R51, \ - L52, L53, R52, R53 \ - ) \ - { \ - { L00, L01, L02, L03, L04, L05 }, \ - { L10, L11, L12, L13, L14, L15 }, \ - { L20, L21, L22, L23, L24, L25 }, \ - { L30, L31, L32, L33, L34, L35 }, \ - { KC_NO, KC_NO, L42, L43, L44, L45 }, \ - { KC_NO, KC_NO, L52, L53, L54, L55 }, \ -\ - { R00, R01, R02, R03, R04, R05 }, \ - { R10, R11, R12, R13, R14, R15 }, \ - { R20, R21, R22, R23, R24, R25 }, \ - { R30, R31, R32, R33, R34, R35 }, \ - { R40, R41, R42, R43, KC_NO, KC_NO },\ - { R50, R51, R52, R53, KC_NO, KC_NO }, \ - } - -#endif diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h new file mode 100644 index 0000000000..29ab59ad66 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +//#define EE_HANDS +// Rows are doubled-up diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c new file mode 100644 index 0000000000..d0bcbd4e6b --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +#include QMK_KEYBOARD_H + + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +#define SFT_ESC SFT_T(KC_ESC) +#define CTL_BSPC CTL_T(KC_BSPC) +#define ALT_SPC ALT_T(KC_SPC) +#define SFT_ENT SFT_T(KC_ENT) + +#define KC_ML KC_MS_LEFT +#define KC_MR KC_MS_RIGHT +#define KC_MU KC_MS_UP +#define KC_MD KC_MS_DOWN +#define KC_MB1 KC_MS_BTN1 +#define KC_MB2 KC_MS_BTN1 +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +#define _______ KC_TRNS + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + + [_QWERTY] = LAYOUT_5x6( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), + + [_LOWER] = LAYOUT_5x6( + + KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, + _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, + _______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, + _______,KC_PSCR, _______, KC_P0, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ +), + + [_RAISE] = LAYOUT_5x6( + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + + }; + diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h index 1a7d1e0659..d046806eaa 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/config.h @@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#pragma once #define USE_SERIAL @@ -22,7 +23,3 @@ along with this program. If not, see . // #define MASTER_RIGHT //#define EE_HANDS // Rows are doubled-up -#define MATRIX_ROWS 12 -#define MATRIX_COLS 6 - -#include "../../config.h" diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c index 7dd9f7c869..0282ccc7f9 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c @@ -1,6 +1,4 @@ -#include "dactyl_manuform.h" -#include "action_layer.h" -#include "eeconfig.h" +#include QMK_KEYBOARD_H extern keymap_config_t keymap_config; @@ -33,18 +31,18 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_5x6( - KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, - KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, - KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, - KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, - KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, - RAISE,KC_SPC, KC_ENT, LOWER, - KC_TAB,KC_HOME, KC_END, KC_DEL, - KC_BSPC, KC_GRV, KC_LGUI, KC_LALT - ), + [_QWERTY] = LAYOUT_5x6( + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), - [_LOWER] = LAYOUT_5x6( + [_LOWER] = LAYOUT_5x6( KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, diff --git a/keyboards/handwired/dactyl_manuform/5x6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/rules.mk index 6b1201781a..14b6e1e4e3 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6/rules.mk @@ -1,47 +1,3 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Build Options # change to "no" to disable the options, or define them in the Makefile in @@ -59,9 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 = yes -USE_I2C = yes + # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -SPLIT_KEYBOARD = yes \ No newline at end of file diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h new file mode 100644 index 0000000000..19cd356d89 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tshort +// defined in subfolder +#define DESCRIPTION A split keyboard for the cheap makers + +/* mouse config */ +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Enables This makes it easier for fast typists to use dual-function keys */ +#define PERMISSIVE_HOLD + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 12 // Number of LEDs + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c new file mode 100644 index 0000000000..043bbd5672 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.c @@ -0,0 +1 @@ +#include "dactyl_manuform.h" diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h new file mode 100644 index 0000000000..6c23e9143d --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h @@ -0,0 +1,22 @@ +#pragma once + + +#ifdef KEYBOARD_handwired_dactyl_manuform_5x6 + #include "5x6.h" +#elif KEYBOARD_handwired_dactyl_manuform_4x5 + #include "4x5.h" +#endif + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + + diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md new file mode 100644 index 0000000000..eb76a7150e --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -0,0 +1,142 @@ +Dactyl Manuform 5x6 +====== +the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. +![Imgur](https://i.imgur.com/7y0Vbyd.jpg) + + +## First Time Setup + +Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: + +``` +$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME +``` + +If everything worked correctly you will see a file: + +``` +dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. + +## Keymaps +Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. +### Impstyle + + + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable + +Alternatively, you can use any sort of cable and socket that has at least 3 +wires. If you want to use I2C to communicate between halves, you will need a +cable with at least 4 wires and 2x 4.7kΩ pull-up resistors + +Optional Hardware +----------------- +A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. + +Wiring +------ + +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. +PD0 on the ATmega32u4) between the two Pro Micros. + +Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro +and modify the `matrix.c` accordingly. + +The wiring for serial: + +![serial wiring](https://i.imgur.com/C3D1GAQ.png) + +The wiring for i2c: + +![i2c wiring](https://i.imgur.com/Hbzhc6E.png) + +The pull-up resistors may be placed on either half. It is also possible +to use 4 resistors and have the pull-ups in both halves, but this is +unnecessary in simple use cases. + +You can change your configuration between serial and i2c by modifying your `config.h` file. + +Notes on Software Configuration +------------------------------- + +the keymaps in here are for the 4x5 layout of the keyboard only. + +Flashing +------- +From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. +Example: `make lets_split/rev2:default:avrdude` + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/handwired/dactyl_manuform/rules.mk b/keyboards/handwired/dactyl_manuform/rules.mk new file mode 100644 index 0000000000..adb058c8af --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/rules.mk @@ -0,0 +1,66 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +SPLIT_KEYBOARD = yes -- cgit v1.2.3 From 3549415116339a0af15d54437c07d188d6de6ad2 Mon Sep 17 00:00:00 2001 From: zwnk Date: Wed, 15 Aug 2018 19:31:59 -0300 Subject: Keyboard: dactyl manuform 6x6 added (#3662) * mouse layer keys shifted * mouse layer keys shifted * manuform 5x6 added * mouse layer keys shifted * manuform 5x6 added * dactyl_manuform 5x6 keymap added * reorg. dactyl manuform folder * removed LAYOUTS = ortho_4x12 for 4x5 * Rows and Cols in config.h fixed * MASTER_LEFT * 5x6 matrix fixed * keymap updated * removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD * default keymap for dactyl_manuform 5x6 * Fixes for Dactyl Manuform * Add/update default keymap * readme dactyl_manuform updated * links to keymaps added * dactyl_manuform 6x6 added. README updated * dactyl_manuform README updated * cleanup * more cleanup --- keyboards/handwired/dactyl_manuform/4x5/readme.md | 161 --------------------- .../dactyl_manuform/5x6/keymaps/default/keymap.c | 25 +--- .../dactyl_manuform/5x6/keymaps/impstyle/keymap.c | 46 ++---- keyboards/handwired/dactyl_manuform/5x6/readme.md | 142 ------------------ keyboards/handwired/dactyl_manuform/6x6/6x6.c | 23 +++ keyboards/handwired/dactyl_manuform/6x6/6x6.h | 44 ++++++ keyboards/handwired/dactyl_manuform/6x6/config.h | 33 +++++ .../dactyl_manuform/6x6/keymaps/default/config.h | 27 ++++ .../dactyl_manuform/6x6/keymaps/default/keymap.c | 57 ++++++++ keyboards/handwired/dactyl_manuform/6x6/rules.mk | 21 +++ .../handwired/dactyl_manuform/dactyl_manuform.h | 5 +- keyboards/handwired/dactyl_manuform/readme.md | 51 +++++-- 12 files changed, 266 insertions(+), 369 deletions(-) delete mode 100644 keyboards/handwired/dactyl_manuform/4x5/readme.md delete mode 100644 keyboards/handwired/dactyl_manuform/5x6/readme.md create mode 100644 keyboards/handwired/dactyl_manuform/6x6/6x6.c create mode 100644 keyboards/handwired/dactyl_manuform/6x6/6x6.h create mode 100644 keyboards/handwired/dactyl_manuform/6x6/config.h create mode 100644 keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h create mode 100644 keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/6x6/rules.mk (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/4x5/readme.md b/keyboards/handwired/dactyl_manuform/4x5/readme.md deleted file mode 100644 index aab792f224..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x5/readme.md +++ /dev/null @@ -1,161 +0,0 @@ -Dactyl Manuform 4x5 -====== -the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. -![Imgur](https://i.imgur.com/7y0Vbyd.jpg) - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -``` -$ make handwired/dactyl_manuform/4x5:dvorak -``` - -You will see a lot of output and if everything worked correctly you will see the built hex file: - -``` -dactyl_manuform_4x5_dvorak.hex -``` - -If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: - -``` -$ make handwired/dactyl_manuform/4x5:YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -dactyl_manuform_4x5_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - -## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Qwerty and Dvorak -Qwerty base layer: -![Imgur](https://i.imgur.com/Yb5e7dS.png) -Dvorak base layer: -![Imgur](https://i.imgur.com/CpuZptB.png) -Both keymaps have the same Raise and Lower layers: -Raise Layer -![Imgur](https://i.imgur.com/nOqePK5.png) -Lower Layer -![Imgur](https://i.imgur.com/WSshkYc.png) - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - -The wiring for i2c: - -![i2c wiring](https://i.imgur.com/Hbzhc6E.png) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -You can change your configuration between serial and i2c by modifying your `config.h` file. - -Notes on Software Configuration -------------------------------- - -the keymaps in here are for the 4x5 layout of the keyboard only. - -Flashing -------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c index d0bcbd4e6b..7be6a5bc71 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c @@ -1,27 +1,13 @@ -#include QMK_KEYBOARD_H +/* A standard layout for the Dactyl Manuform 5x6 Keyboard */ +#include QMK_KEYBOARD_H extern keymap_config_t keymap_config; -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define SFT_ESC SFT_T(KC_ESC) -#define CTL_BSPC CTL_T(KC_BSPC) -#define ALT_SPC ALT_T(KC_SPC) -#define SFT_ENT SFT_T(KC_ENT) - -#define KC_ML KC_MS_LEFT -#define KC_MR KC_MS_RIGHT -#define KC_MU KC_MS_UP -#define KC_MD KC_MS_DOWN -#define KC_MB1 KC_MS_BTN1 -#define KC_MB2 KC_MS_BTN1 #define RAISE MO(_RAISE) #define LOWER MO(_LOWER) @@ -31,8 +17,6 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_5x6( KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, @@ -54,7 +38,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______, _______,_______, _______,_______, _______,_______, _______,_______ -), + + ), [_RAISE] = LAYOUT_5x6( KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , @@ -66,6 +51,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______, _______,_______, _______,_______ ), +}; - }; diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c index 0282ccc7f9..9a89212fec 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c @@ -1,26 +1,14 @@ + +/* A QWERTY 3 Layer layout for the Dactyl Manuform 5x6 Keyboard */ + #include QMK_KEYBOARD_H extern keymap_config_t keymap_config; -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define SFT_ESC SFT_T(KC_ESC) -#define CTL_BSPC CTL_T(KC_BSPC) -#define ALT_SPC ALT_T(KC_SPC) -#define SFT_ENT SFT_T(KC_ENT) - -#define KC_ML KC_MS_LEFT -#define KC_MR KC_MS_RIGHT -#define KC_MU KC_MS_UP -#define KC_MD KC_MS_DOWN -#define KC_MB1 KC_MS_BTN1 -#define KC_MB2 KC_MS_BTN1 #define RAISE MO(_RAISE) #define LOWER MO(_LOWER) @@ -37,11 +25,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, - RAISE,KC_SPC, KC_ENT, LOWER, + RAISE,KC_SPC, KC_ENT, LOWER, KC_TAB,KC_HOME, KC_END, KC_DEL, - KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + KC_BSPC,KC_GRV, KC_LGUI, KC_LALT ), + [_LOWER] = LAYOUT_5x6( KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, @@ -51,23 +40,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______, _______,_______, _______,_______, _______,_______, _______,_______ + ), [_RAISE] = LAYOUT_5x6( - KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , - _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, - _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, - _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, - _______,_______, KC_EQL ,_______, - _______,_______, _______,_______, - _______,_______, _______,_______, - _______,_______, _______,_______ + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ ), }; - - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} diff --git a/keyboards/handwired/dactyl_manuform/5x6/readme.md b/keyboards/handwired/dactyl_manuform/5x6/readme.md deleted file mode 100644 index eb76a7150e..0000000000 --- a/keyboards/handwired/dactyl_manuform/5x6/readme.md +++ /dev/null @@ -1,142 +0,0 @@ -Dactyl Manuform 5x6 -====== -the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. -![Imgur](https://i.imgur.com/7y0Vbyd.jpg) - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -``` -$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - -## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Impstyle - - - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - -The wiring for i2c: - -![i2c wiring](https://i.imgur.com/Hbzhc6E.png) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -You can change your configuration between serial and i2c by modifying your `config.h` file. - -Notes on Software Configuration -------------------------------- - -the keymaps in here are for the 4x5 layout of the keyboard only. - -Flashing -------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/handwired/dactyl_manuform/6x6/6x6.c b/keyboards/handwired/dactyl_manuform/6x6/6x6.c new file mode 100644 index 0000000000..9eb27531a8 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/6x6.c @@ -0,0 +1,23 @@ +#include "6x6.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/6x6/6x6.h b/keyboards/handwired/dactyl_manuform/6x6/6x6.h new file mode 100644 index 0000000000..c2980b3d31 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/6x6.h @@ -0,0 +1,44 @@ +#pragma once + +#include "dactyl_manuform.h" +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +#define LAYOUT_6x6(\ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \ + L52, L53, R52, R53, \ + L54, L55, R50, R51, \ + L64, L65, R60, R61, \ + L62, L63, R62, R63 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { L40, L41, L42, L43, L44, L45 }, \ + { KC_NO, KC_NO, L52, L53, L54, L55 }, \ + { KC_NO, KC_NO, L62, L63, L64, L65 }, \ +\ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 }, \ + { R40, R41, R42, R43, R44, R45 }, \ + { R50, R51, R52, R53, KC_NO, KC_NO },\ + { R60, R61, R62, R63, KC_NO, KC_NO }, \ + } + + diff --git a/keyboards/handwired/dactyl_manuform/6x6/config.h b/keyboards/handwired/dactyl_manuform/6x6/config.h new file mode 100644 index 0000000000..9bb7b07bf2 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/config.h @@ -0,0 +1,33 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + + +#define PRODUCT Dactyl-Manuform (6x6) + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 14 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } +#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h new file mode 100644 index 0000000000..29ab59ad66 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +//#define EE_HANDS +// Rows are doubled-up diff --git a/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c new file mode 100644 index 0000000000..1b1cbd4aea --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c @@ -0,0 +1,57 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_6x6( + + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), + + [_LOWER] = LAYOUT_6x6( + + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , + KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, + _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, + _______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, + _______,KC_PSCR, _______, KC_P0, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + + [_RAISE] = LAYOUT_6x6( + + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + +}; + diff --git a/keyboards/handwired/dactyl_manuform/6x6/rules.mk b/keyboards/handwired/dactyl_manuform/6x6/rules.mk new file mode 100644 index 0000000000..14b6e1e4e3 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/rules.mk @@ -0,0 +1,21 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h index 6c23e9143d..3222e6a617 100644 --- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h @@ -1,7 +1,10 @@ #pragma once -#ifdef KEYBOARD_handwired_dactyl_manuform_5x6 + +#ifdef KEYBOARD_handwired_dactyl_manuform_6x6 + #include "6x6.h" +#elif KEYBOARD_handwired_dactyl_manuform_5x6 #include "5x6.h" #elif KEYBOARD_handwired_dactyl_manuform_4x5 #include "4x5.h" diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md index eb76a7150e..3f72bd6b21 100644 --- a/keyboards/handwired/dactyl_manuform/readme.md +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -1,32 +1,55 @@ -Dactyl Manuform 5x6 +Dactyl Manuform (4x5, 5x6, 6x6) ====== the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. ![Imgur](https://i.imgur.com/7y0Vbyd.jpg) ## First Time Setup - +----------------- Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: +Depending on your Layout chose one of the follwing commands: + ``` -$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME +$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME +``` + +example: +``` +$ make handwired/dactyl_manuform/4x5:default ``` If everything worked correctly you will see a file: ``` -dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex +dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex ``` For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. + ## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Impstyle +----------------- +### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/) + +#### Default +Simple QWERTY layout with 3 Layers. +#### Dvorak + +### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/) +#### Default +Just a copy of the Impstyle keymap. Feel free to adjust it. +#### Impstyle +A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master. -Required Hardware +### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/) + +#### Default +Simple QWERTY layout with 3 Layers. + +##Required Hardware ----------------- Apart from diodes and key switches for the keyboard matrix in each half, you @@ -39,11 +62,11 @@ Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors -Optional Hardware +##Optional Hardware ----------------- A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. -Wiring +##Wiring ------ The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. @@ -66,18 +89,18 @@ unnecessary in simple use cases. You can change your configuration between serial and i2c by modifying your `config.h` file. -Notes on Software Configuration +##Notes on Software Configuration ------------------------------- the keymaps in here are for the 4x5 layout of the keyboard only. -Flashing +##Flashing ------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` + +To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing) -Choosing which board to plug the USB cable into (choosing Master) +##Choosing which board to plug the USB cable into (choosing Master) -------- Because the two boards are identical, the firmware has logic to differentiate the left and right board. -- cgit v1.2.3 From c6eccb39e0da150b7575b96d68366ba46f22306b Mon Sep 17 00:00:00 2001 From: zwnk Date: Thu, 23 Aug 2018 15:48:30 -0300 Subject: Keyboard: dactyl_manuform 5x7 aka Ergodox-ish added (#3691) * dactyl_manuform 5x7 aka Ergodox added * LAYOUTS = ergodox removed * README updated * README updated again * zip file removed --- keyboards/handwired/dactyl_manuform/5x6/5x6.h | 6 -- keyboards/handwired/dactyl_manuform/5x7/5x7.c | 23 ++++++ keyboards/handwired/dactyl_manuform/5x7/5x7.h | 45 ++++++++++++ keyboards/handwired/dactyl_manuform/5x7/config.h | 33 +++++++++ .../dactyl_manuform/5x7/keymaps/default/config.h | 27 +++++++ .../dactyl_manuform/5x7/keymaps/default/keymap.c | 85 ++++++++++++++++++++++ keyboards/handwired/dactyl_manuform/5x7/rules.mk | 20 +++++ .../handwired/dactyl_manuform/dactyl_manuform.h | 4 +- keyboards/handwired/dactyl_manuform/readme.md | 32 ++++---- 9 files changed, 252 insertions(+), 23 deletions(-) create mode 100644 keyboards/handwired/dactyl_manuform/5x7/5x7.c create mode 100644 keyboards/handwired/dactyl_manuform/5x7/5x7.h create mode 100644 keyboards/handwired/dactyl_manuform/5x7/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x7/keymaps/default/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x7/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/5x7/rules.mk (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/5x6/5x6.h b/keyboards/handwired/dactyl_manuform/5x6/5x6.h index cb225a2cf2..72045cc291 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/5x6.h +++ b/keyboards/handwired/dactyl_manuform/5x6/5x6.h @@ -1,11 +1,8 @@ #pragma once #include "dactyl_manuform.h" - -//void promicro_bootloader_jmp(bool program); #include "quantum.h" - #ifdef USE_I2C #include #ifdef __AVR__ @@ -14,9 +11,6 @@ #endif #endif -//void promicro_bootloader_jmp(bool program); - - #define LAYOUT_5x6(\ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ diff --git a/keyboards/handwired/dactyl_manuform/5x7/5x7.c b/keyboards/handwired/dactyl_manuform/5x7/5x7.c new file mode 100644 index 0000000000..135014d655 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/5x7.c @@ -0,0 +1,23 @@ +#include "5x7.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/5x7/5x7.h b/keyboards/handwired/dactyl_manuform/5x7/5x7.h new file mode 100644 index 0000000000..95fd5bb102 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/5x7.h @@ -0,0 +1,45 @@ +#pragma once + +#include "dactyl_manuform.h" +#include "quantum.h" + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +#define LAYOUT_5x7( \ + L11, L12, L13, L14, L15, L16, L17, \ + L21, L22, L23, L24, L25, L26, L27, \ + L31, L32, L33, L34, L35, L36, L37, \ + L41, L42, L43, L44, L45, L46, \ + L51, L52, L53, L54, \ + L55, L56, \ + L65, L66, \ + L63, L64, \ + R11, R12, R13, R14, R15, R16, R17, \ + R21, R22, R23, R24, R25, R26, R27, \ + R31, R32, R33, R34, R35, R36, R37, \ + R42, R43, R44, R45, R46, R47, \ + R54, R55, R56, R57, \ + R52, R53, \ + R62, R63, \ + R64, R65 \ + ) \ + { \ + { L11, L12, L13, L14, L15, L16, L17 }, \ + { L21, L22, L23, L24, L25, L26, L27 }, \ + { L31, L32, L33, L34, L35, L36, L37 }, \ + { L41, L42, L43, L44, L45, L46, KC_NO }, \ + { L51, L52, L53, L54, L55, L56, KC_NO }, \ + { KC_NO, KC_NO, L63, L64, L65, L66, KC_NO }, \ + { R11, R12, R13, R14, R15, R16, R17 }, \ + { R21, R22, R23, R24, R25, R26, R27 }, \ + { R31, R32, R33, R34, R35, R36, R37 }, \ + { KC_NO, R42, R43, R44, R45, R46, R47 }, \ + { KC_NO, R52, R53, R54, R55, R56, R57 }, \ + { KC_NO, R62, R63, R64, R65, KC_NO, KC_NO } \ + } diff --git a/keyboards/handwired/dactyl_manuform/5x7/config.h b/keyboards/handwired/dactyl_manuform/5x7/config.h new file mode 100644 index 0000000000..bef48f17ea --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/config.h @@ -0,0 +1,33 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + + +#define PRODUCT Dactyl-Manuform (Ergodox) + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 12 +#define MATRIX_COLS 7 + +// wiring of each half +#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/dactyl_manuform/5x7/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/5x7/keymaps/default/config.h new file mode 100644 index 0000000000..29ab59ad66 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +//#define EE_HANDS +// Rows are doubled-up diff --git a/keyboards/handwired/dactyl_manuform/5x7/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x7/keymaps/default/keymap.c new file mode 100644 index 0000000000..8b83b538fe --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/keymaps/default/keymap.c @@ -0,0 +1,85 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _FN 1 +#define _NUMPAD 2 + + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +// Some basic macros +#define TASK LCTL(LSFT(KC_ESC)) +#define TAB_R LCTL(KC_TAB) +#define TAB_L LCTL(LSFT(KC_TAB)) +#define TAB_RO LCTL(LSFT(KC_T)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = LAYOUT_5x7( + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, TAB_RO, + OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_CAPS, KC_LGUI, TAB_L, TAB_R, + TT(_FN), KC_SPC, + KC_END, KC_HOME, + KC_PSCR, TASK, + // right hand + KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, + KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + TG(_NUMPAD), KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, OSM(MOD_RSFT), + KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, + KC_BSPC, KC_ENT, + KC_PGUP, KC_PGDN, + KC_LCTL, KC_LALT), + +[_FN] = LAYOUT_5x7( + // left hand + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + _______, _______, _______, KC_UP, _______, _______, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, RESET, + _______, _______, _______, _______, _______, _______, + KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, + _______, _______, + _______, _______, + _______, _______, + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + KC_DEL, _______, + _______, _______, + _______, _______), + +[_NUMPAD] = LAYOUT_5x7( + // left hand + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, + _______, _______, + _______, _______, + // right hand + _______, _______, KC_NLCK, _______, KC_PMNS, KC_PPLS, _______, + _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, + _______, _______, KC_P4, KC_P5, KC_P6, KC_PAST, _______, + _______, KC_P1, KC_P2, KC_P3, KC_PSLS, _______, + KC_P0, KC_PDOT, _______, _______, + _______, KC_PENT, + _______, _______, + _______, _______), + +}; diff --git a/keyboards/handwired/dactyl_manuform/5x7/rules.mk b/keyboards/handwired/dactyl_manuform/5x7/rules.mk new file mode 100644 index 0000000000..fc9cbcccd4 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/rules.mk @@ -0,0 +1,20 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h index 3222e6a617..8b60097bc2 100644 --- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h @@ -1,13 +1,13 @@ #pragma once - - #ifdef KEYBOARD_handwired_dactyl_manuform_6x6 #include "6x6.h" #elif KEYBOARD_handwired_dactyl_manuform_5x6 #include "5x6.h" #elif KEYBOARD_handwired_dactyl_manuform_4x5 #include "4x5.h" +#elif KEYBOARD_handwired_dactyl_manuform_5x7 + #include "5x7.h" #endif //void promicro_bootloader_jmp(bool program); diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md index 3f72bd6b21..00288a8768 100644 --- a/keyboards/handwired/dactyl_manuform/readme.md +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -1,11 +1,11 @@ -Dactyl Manuform (4x5, 5x6, 6x6) +Dactyl Manuform (4x5, 5x6, 5x7, 6x6) ====== the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. ![Imgur](https://i.imgur.com/7y0Vbyd.jpg) ## First Time Setup ------------------ + Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: Depending on your Layout chose one of the follwing commands: @@ -29,7 +29,7 @@ For more information on customizing keymaps, take a look at the primary document ## Keymaps ------------------ + ### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/) #### Default @@ -44,13 +44,16 @@ Just a copy of the Impstyle keymap. Feel free to adjust it. #### Impstyle A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master. +### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/) +#### Default +Keymap of Loligagger from geekhack. + ### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/) #### Default Simple QWERTY layout with 3 Layers. -##Required Hardware ------------------ +## Required Hardware Apart from diodes and key switches for the keyboard matrix in each half, you will need: @@ -62,12 +65,10 @@ Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors -##Optional Hardware ------------------ +## Optional Hardware A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. -##Wiring ------- +## Wiring The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros. @@ -89,19 +90,17 @@ unnecessary in simple use cases. You can change your configuration between serial and i2c by modifying your `config.h` file. -##Notes on Software Configuration -------------------------------- +## Notes on Software Configuration the keymaps in here are for the 4x5 layout of the keyboard only. -##Flashing -------- +## Flashing To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing) -##Choosing which board to plug the USB cable into (choosing Master) --------- +## Choosing which board to plug the USB cable into (choosing Master) + Because the two boards are identical, the firmware has logic to differentiate the left and right board. It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. @@ -111,15 +110,18 @@ The EEPROM approach requires additional setup (flashing the eeprom) but allows y The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. ### Setting the left hand as master + If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. ### Setting the right hand as master + If you always plug the usb cable into the right board, add an extra flag to your `config.h` ``` #define MASTER_RIGHT ``` ### Setting EE_hands to use either hands as master + If you define `EE_HANDS` in your `config.h`, you will need to set the EEPROM for the left and right halves. -- cgit v1.2.3 From d55468c18d666870cfe095d32153e5e503e50649 Mon Sep 17 00:00:00 2001 From: Filip Sund Date: Wed, 3 Oct 2018 21:04:01 +0200 Subject: Keyboard: Added dactyl-manuform 4x6 and keymap. (#4058) * Added dactyl-manuform 4x6 and keymap. * Did changes recommended by drashna. --- .../dactyl_manuform/4x5/keymaps/default/config.h | 5 +- .../dactyl_manuform/4x5/keymaps/dvorak/config.h | 5 +- keyboards/handwired/dactyl_manuform/4x6/4x6.c | 14 ++++ keyboards/handwired/dactyl_manuform/4x6/4x6.h | 36 +++++++++ keyboards/handwired/dactyl_manuform/4x6/config.h | 40 ++++++++++ .../dactyl_manuform/4x6/keymaps/default/config.h | 31 ++++++++ .../dactyl_manuform/4x6/keymaps/default/keymap.c | 87 ++++++++++++++++++++++ keyboards/handwired/dactyl_manuform/4x6/rules.mk | 21 ++++++ .../handwired/dactyl_manuform/dactyl_manuform.h | 10 ++- 9 files changed, 237 insertions(+), 12 deletions(-) create mode 100644 keyboards/handwired/dactyl_manuform/4x6/4x6.c create mode 100644 keyboards/handwired/dactyl_manuform/4x6/4x6.h create mode 100644 keyboards/handwired/dactyl_manuform/4x6/config.h create mode 100644 keyboards/handwired/dactyl_manuform/4x6/keymaps/default/config.h create mode 100644 keyboards/handwired/dactyl_manuform/4x6/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/4x6/rules.mk (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h index 216917ed71..682c7a868b 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/default/config.h @@ -18,8 +18,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once #include "../../config.h" @@ -33,5 +32,3 @@ along with this program. If not, see . // #define MASTER_LEFT // #define MASTER_RIGHT #define EE_HANDS - -#endif diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h index 216917ed71..682c7a868b 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/dvorak/config.h @@ -18,8 +18,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once #include "../../config.h" @@ -33,5 +32,3 @@ along with this program. If not, see . // #define MASTER_LEFT // #define MASTER_RIGHT #define EE_HANDS - -#endif diff --git a/keyboards/handwired/dactyl_manuform/4x6/4x6.c b/keyboards/handwired/dactyl_manuform/4x6/4x6.c new file mode 100644 index 0000000000..1d305c8541 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/4x6.c @@ -0,0 +1,14 @@ +#include "4x6.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/4x6/4x6.h b/keyboards/handwired/dactyl_manuform/4x6/4x6.h new file mode 100644 index 0000000000..25741be57b --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/4x6.h @@ -0,0 +1,36 @@ +#pragma once + +#include "dactyl_manuform.h" +#include "quantum.h" + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +#define LAYOUT(\ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L32, L33, R32, R33, \ + L34, L35, R30, R31, \ + L44, L45, R40, R41, \ + L42, L43, R42, R43 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { KC_NO, KC_NO, L32, L33, L34, L35 }, \ + { KC_NO, KC_NO, L42, L43, L44, L45 }, \ +\ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, KC_NO, KC_NO }, \ + { R40, R41, R42, R43, KC_NO, KC_NO } \ +\ + } diff --git a/keyboards/handwired/dactyl_manuform/4x6/config.h b/keyboards/handwired/dactyl_manuform/4x6/config.h new file mode 100644 index 0000000000..d4a1922876 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/config.h @@ -0,0 +1,40 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tshort +#define DESCRIPTION A split keyboard for the cheap makers + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 10 +#define MATRIX_COLS 6 + +// row-driven +#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/handwired/dactyl_manuform/4x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/4x6/keymaps/default/config.h new file mode 100644 index 0000000000..1fc2c617f6 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/keymaps/default/config.h @@ -0,0 +1,31 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* Use I2C or Serial, not both */ +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +// #define MASTER_LEFT +// #define MASTER_RIGHT +#define EE_HANDS diff --git a/keyboards/handwired/dactyl_manuform/4x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/4x6/keymaps/default/keymap.c new file mode 100644 index 0000000000..ad23beef5c --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/keymaps/default/keymap.c @@ -0,0 +1,87 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _BASE 0 +#define _RAISE 1 +#define _LOWER 2 + +// Fillers to make layering more clear + +#define ____ KC_TRNS + +#define SFT_ESC SFT_T(KC_ESC) +#define CTL_BSPC CTL_T(KC_BSPC) +#define ALT_SPC ALT_T(KC_SPC) +#define SFT_ENT SFT_T(KC_ENT) + +#define KC_ML KC_MS_LEFT +#define KC_MR KC_MS_RIGHT +#define KC_MU KC_MS_UP +#define KC_MD KC_MS_DOWN +#define KC_MB1 KC_MS_BTN1 +#define KC_MB2 KC_MS_BTN1 + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Base (qwerty) + * +-----------------------------------------+ +-----------------------------------------+ + * | ESC | q | w | e | r | t | | y | u | i | o | p | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | TAB | a | s | d | f | g | | h | j | k | l | ; | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | SHFT | z | x | c | v | b | | n | m | , | . | / | | + * +------+------+------+------+-------------+ +-------------+------+------+------+------+ + * | [ | ] | | | | + * +-------------+-------------+ +-------------+-------------+ + * | | | | | | + * |------+------| |------+------| + * | | | | | | + * +-------------+ +-------------+ + * +-------------+ +-------------+ + * | | | | | | + * |------+------| |------+------| + * | | | | | | + * +-------------+ +-------------+ + */ + +[_BASE] = LAYOUT( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_BSLASH, \ + KC_LBRC,KC_RBRC, KC_PLUS,KC_EQL, \ + RAISE, KC_SPC, KC_ENT, LOWER, \ + KC_TAB, KC_HOME, KC_END, KC_DEL, \ + KC_BSPC,KC_GRV, KC_LGUI,KC_LALT \ +), + +[_LOWER] = LAYOUT( + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, RESET, KC_PLUS, \ + _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4, KC_P5, KC_P6, KC_MINS,KC_PIPE, \ + _______,_______,_______,_______,_______,_______, _______, KC_P1, KC_P2, KC_P3, KC_EQL, KC_UNDS, \ + _______,KC_PSCR, _______, KC_P0, \ + _______,_______, _______,_______, \ + _______,_______, _______,_______, \ + _______,_______, _______,_______ \ +), + +[_RAISE] = LAYOUT( + _______,RESET, _______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS, KC_SLCK,KC_MUTE, \ + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, \ + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, \ + _______,_______, KC_EQL, _______, \ + _______,_______, _______,_______, \ + _______,_______, _______,_______, \ + _______,_______, _______,_______ \ +) +}; + + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + diff --git a/keyboards/handwired/dactyl_manuform/4x6/rules.mk b/keyboards/handwired/dactyl_manuform/4x6/rules.mk new file mode 100644 index 0000000000..14b6e1e4e3 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/rules.mk @@ -0,0 +1,21 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h index 8b60097bc2..eea0757d59 100644 --- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h @@ -1,13 +1,15 @@ #pragma once -#ifdef KEYBOARD_handwired_dactyl_manuform_6x6 - #include "6x6.h" +#ifdef KEYBOARD_handwired_dactyl_manuform_4x5 + #include "4x5.h" +#elif KEYBOARD_handwired_dactyl_manuform_4x6 + #include "4x6.h" #elif KEYBOARD_handwired_dactyl_manuform_5x6 #include "5x6.h" -#elif KEYBOARD_handwired_dactyl_manuform_4x5 - #include "4x5.h" #elif KEYBOARD_handwired_dactyl_manuform_5x7 #include "5x7.h" +#elif KEYBOARD_handwired_dactyl_manuform_6x6 + #include "6x6.h" #endif //void promicro_bootloader_jmp(bool program); -- cgit v1.2.3 From 00b6f14821f44ead75504e28d7fed26791cb2875 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 22 Oct 2018 08:57:37 -0700 Subject: Replace outdated RGB/Audio information --- keyboards/handwired/dactyl_manuform/4x5/rules.mk | 3 +-- keyboards/handwired/dactyl_manuform/4x6/rules.mk | 3 +-- keyboards/handwired/dactyl_manuform/5x6/rules.mk | 3 +-- keyboards/handwired/dactyl_manuform/5x7/rules.mk | 2 +- keyboards/handwired/dactyl_manuform/6x6/rules.mk | 3 +-- keyboards/handwired/dactyl_manuform/rules.mk | 2 +- 6 files changed, 6 insertions(+), 10 deletions(-) (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk index 14b6e1e4e3..7508070515 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk @@ -14,8 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/handwired/dactyl_manuform/4x6/rules.mk b/keyboards/handwired/dactyl_manuform/4x6/rules.mk index 14b6e1e4e3..7508070515 100644 --- a/keyboards/handwired/dactyl_manuform/4x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/4x6/rules.mk @@ -14,8 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/handwired/dactyl_manuform/5x6/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/rules.mk index 14b6e1e4e3..7508070515 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6/rules.mk @@ -14,8 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/handwired/dactyl_manuform/5x7/rules.mk b/keyboards/handwired/dactyl_manuform/5x7/rules.mk index fc9cbcccd4..7508070515 100644 --- a/keyboards/handwired/dactyl_manuform/5x7/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x7/rules.mk @@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/dactyl_manuform/6x6/rules.mk b/keyboards/handwired/dactyl_manuform/6x6/rules.mk index 14b6e1e4e3..7508070515 100644 --- a/keyboards/handwired/dactyl_manuform/6x6/rules.mk +++ b/keyboards/handwired/dactyl_manuform/6x6/rules.mk @@ -14,8 +14,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/handwired/dactyl_manuform/rules.mk b/keyboards/handwired/dactyl_manuform/rules.mk index adb058c8af..a93de36858 100644 --- a/keyboards/handwired/dactyl_manuform/rules.mk +++ b/keyboards/handwired/dactyl_manuform/rules.mk @@ -58,7 +58,7 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -- cgit v1.2.3 From 7e99d869deb57251dc15620beff34d5fd53066e4 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 22 Oct 2018 10:26:19 -0700 Subject: Remove all of the deprecated RGB defines Fixes #3641 --- keyboards/handwired/dactyl_manuform/config.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h index 19cd356d89..320ce3c482 100644 --- a/keyboards/handwired/dactyl_manuform/config.h +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -53,7 +53,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER + #define RGBLED_NUM 12 // Number of LEDs @@ -74,5 +74,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - - -- cgit v1.2.3 From 58670ef4b75dad47770401167427bbeed1d5e170 Mon Sep 17 00:00:00 2001 From: noroadsleft <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 5 Dec 2018 15:27:55 -0800 Subject: Keyboard: Configurator support for handwired/dactyl_manuform (#4558) * handwired/dactyl_manuform/4x5: Configurator support * handwired/dactyl_manuform/4x6: Configurator support * handwired/dactyl_manuform/5x6: Configurator support * handwired/dactyl_manuform/5x7: Configurator support * handwired/dactyl_manuform/6x6: Configurator support --- keyboards/handwired/dactyl_manuform/4x5/info.json | 59 +++++++++++++++ keyboards/handwired/dactyl_manuform/4x6/info.json | 65 +++++++++++++++++ keyboards/handwired/dactyl_manuform/5x6/info.json | 77 ++++++++++++++++++++ keyboards/handwired/dactyl_manuform/5x7/info.json | 87 ++++++++++++++++++++++ keyboards/handwired/dactyl_manuform/6x6/info.json | 89 +++++++++++++++++++++++ 5 files changed, 377 insertions(+) create mode 100644 keyboards/handwired/dactyl_manuform/4x5/info.json create mode 100644 keyboards/handwired/dactyl_manuform/4x6/info.json create mode 100644 keyboards/handwired/dactyl_manuform/5x6/info.json create mode 100644 keyboards/handwired/dactyl_manuform/5x7/info.json create mode 100644 keyboards/handwired/dactyl_manuform/6x6/info.json (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/4x5/info.json b/keyboards/handwired/dactyl_manuform/4x5/info.json new file mode 100644 index 0000000000..4ee52e1644 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x5/info.json @@ -0,0 +1,59 @@ +{ + "keyboard_name": "Dactyl Manuform 4x5", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 7, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"R00", "x":10, "y":0}, + {"label":"R01", "x":11, "y":0}, + {"label":"R02", "x":12, "y":0}, + {"label":"R03", "x":13, "y":0}, + {"label":"R04", "x":14, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"R10", "x":10, "y":1}, + {"label":"R11", "x":11, "y":1}, + {"label":"R12", "x":12, "y":1}, + {"label":"R13", "x":13, "y":1}, + {"label":"R14", "x":14, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"R20", "x":10, "y":2}, + {"label":"R21", "x":11, "y":2}, + {"label":"R22", "x":12, "y":2}, + {"label":"R23", "x":13, "y":2}, + {"label":"R24", "x":14, "y":2}, + {"label":"L31", "x":1, "y":3}, + {"label":"L32", "x":2, "y":3}, + {"label":"R32", "x":12, "y":3}, + {"label":"R33", "x":13, "y":3}, + {"label":"L33", "x":3, "y":4}, + {"label":"L34", "x":4, "y":4}, + {"label":"R30", "x":10, "y":4}, + {"label":"R31", "x":11, "y":4}, + {"label":"L44", "x":5, "y":5}, + {"label":"L43", "x":6, "y":5}, + {"label":"R41", "x":8, "y":5}, + {"label":"R40", "x":9, "y":5}, + {"label":"L42", "x":5, "y":6}, + {"label":"L41", "x":6, "y":6}, + {"label":"R43", "x":8, "y":6}, + {"label":"R42", "x":9, "y":6} + ] + } + } +} diff --git a/keyboards/handwired/dactyl_manuform/4x6/info.json b/keyboards/handwired/dactyl_manuform/4x6/info.json new file mode 100644 index 0000000000..ba358a703f --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/4x6/info.json @@ -0,0 +1,65 @@ +{ + "keyboard_name": "Dactyl Manuform 4x6", + "url": "", + "maintainer": "qmk", + "width": 17, + "height": 7, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"L05", "x":5, "y":0}, + {"label":"R00", "x":11, "y":0}, + {"label":"R01", "x":12, "y":0}, + {"label":"R02", "x":13, "y":0}, + {"label":"R03", "x":14, "y":0}, + {"label":"R04", "x":15, "y":0}, + {"label":"R05", "x":16, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"L15", "x":5, "y":1}, + {"label":"R10", "x":11, "y":1}, + {"label":"R11", "x":12, "y":1}, + {"label":"R12", "x":13, "y":1}, + {"label":"R13", "x":14, "y":1}, + {"label":"R14", "x":15, "y":1}, + {"label":"R15", "x":16, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"L25", "x":5, "y":2}, + {"label":"R20", "x":11, "y":2}, + {"label":"R21", "x":12, "y":2}, + {"label":"R22", "x":13, "y":2}, + {"label":"R23", "x":14, "y":2}, + {"label":"R24", "x":15, "y":2}, + {"label":"R25", "x":16, "y":2}, + {"label":"L32", "x":2, "y":3}, + {"label":"L33", "x":3, "y":3}, + {"label":"R32", "x":13, "y":3}, + {"label":"R33", "x":14, "y":3}, + {"label":"L34", "x":4, "y":4}, + {"label":"L35", "x":5, "y":4}, + {"label":"R30", "x":11, "y":4}, + {"label":"R31", "x":12, "y":4}, + {"label":"L44", "x":6, "y":5}, + {"label":"L45", "x":7, "y":5}, + {"label":"R40", "x":9, "y":5}, + {"label":"R41", "x":10, "y":5}, + {"label":"L42", "x":6, "y":6}, + {"label":"L43", "x":7, "y":6}, + {"label":"R42", "x":9, "y":6}, + {"label":"R43", "x":10, "y":6} + ] + } + } +} diff --git a/keyboards/handwired/dactyl_manuform/5x6/info.json b/keyboards/handwired/dactyl_manuform/5x6/info.json new file mode 100644 index 0000000000..d7aa3acee3 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/info.json @@ -0,0 +1,77 @@ +{ + "keyboard_name": "Dactyl Manuform 5x6", + "url": "", + "maintainer": "qmk", + "width": 17, + "height": 8, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"L05", "x":5, "y":0}, + {"label":"R00", "x":11, "y":0}, + {"label":"R01", "x":12, "y":0}, + {"label":"R02", "x":13, "y":0}, + {"label":"R03", "x":14, "y":0}, + {"label":"R04", "x":15, "y":0}, + {"label":"R05", "x":16, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"L15", "x":5, "y":1}, + {"label":"R10", "x":11, "y":1}, + {"label":"R11", "x":12, "y":1}, + {"label":"R12", "x":13, "y":1}, + {"label":"R13", "x":14, "y":1}, + {"label":"R14", "x":15, "y":1}, + {"label":"R15", "x":16, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"L25", "x":5, "y":2}, + {"label":"R20", "x":11, "y":2}, + {"label":"R21", "x":12, "y":2}, + {"label":"R22", "x":13, "y":2}, + {"label":"R23", "x":14, "y":2}, + {"label":"R24", "x":15, "y":2}, + {"label":"R25", "x":16, "y":2}, + {"label":"L30", "x":0, "y":3}, + {"label":"L31", "x":1, "y":3}, + {"label":"L32", "x":2, "y":3}, + {"label":"L33", "x":3, "y":3}, + {"label":"L34", "x":4, "y":3}, + {"label":"L35", "x":5, "y":3}, + {"label":"R30", "x":11, "y":3}, + {"label":"R31", "x":12, "y":3}, + {"label":"R32", "x":13, "y":3}, + {"label":"R33", "x":14, "y":3}, + {"label":"R34", "x":15, "y":3}, + {"label":"R35", "x":16, "y":3}, + {"label":"L42", "x":2, "y":4}, + {"label":"L43", "x":3, "y":4}, + {"label":"R42", "x":13, "y":4}, + {"label":"R43", "x":14, "y":4}, + {"label":"L44", "x":4, "y":5}, + {"label":"L45", "x":5, "y":5}, + {"label":"R40", "x":11, "y":5}, + {"label":"R41", "x":12, "y":5}, + {"label":"L54", "x":6, "y":6}, + {"label":"L55", "x":7, "y":6}, + {"label":"R50", "x":9, "y":6}, + {"label":"R51", "x":10, "y":6}, + {"label":"L52", "x":6, "y":7}, + {"label":"L53", "x":7, "y":7}, + {"label":"R52", "x":9, "y":7}, + {"label":"R53", "x":10, "y":7} + ] + } + } +} diff --git a/keyboards/handwired/dactyl_manuform/5x7/info.json b/keyboards/handwired/dactyl_manuform/5x7/info.json new file mode 100644 index 0000000000..b4b2c7b797 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x7/info.json @@ -0,0 +1,87 @@ +{ + "keyboard_name": "Dactyl Manuform 5x7", + "url": "", + "maintainer": "qmk", + "width": 17, + "height": 16, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L11", "x":0, "y":0}, + {"label":"L12", "x":1, "y":0}, + {"label":"L13", "x":2, "y":0}, + {"label":"L14", "x":3, "y":0}, + {"label":"L15", "x":4, "y":0}, + {"label":"L16", "x":5, "y":0}, + {"label":"L17", "x":6, "y":0}, + {"label":"L21", "x":0, "y":1}, + {"label":"L22", "x":1, "y":1}, + {"label":"L23", "x":2, "y":1}, + {"label":"L24", "x":3, "y":1}, + {"label":"L25", "x":4, "y":1}, + {"label":"L26", "x":5, "y":1}, + {"label":"L27", "x":6, "y":1}, + {"label":"L31", "x":0, "y":2}, + {"label":"L32", "x":1, "y":2}, + {"label":"L33", "x":2, "y":2}, + {"label":"L34", "x":3, "y":2}, + {"label":"L35", "x":4, "y":2}, + {"label":"L36", "x":5, "y":2}, + {"label":"L37", "x":6, "y":2}, + {"label":"L41", "x":0, "y":3}, + {"label":"L42", "x":1, "y":3}, + {"label":"L43", "x":2, "y":3}, + {"label":"L44", "x":3, "y":3}, + {"label":"L45", "x":4, "y":3}, + {"label":"L46", "x":5, "y":3}, + {"label":"L51", "x":0, "y":4}, + {"label":"L52", "x":1, "y":4}, + {"label":"L53", "x":2, "y":4}, + {"label":"L54", "x":3, "y":4}, + {"label":"L55", "x":4, "y":5}, + {"label":"L56", "x":5, "y":5}, + {"label":"L65", "x":6, "y":6}, + {"label":"L66", "x":7, "y":6}, + {"label":"L63", "x":6, "y":7}, + {"label":"L64", "x":7, "y":7}, + {"label":"R11", "x":10, "y":0}, + {"label":"R12", "x":11, "y":0}, + {"label":"R13", "x":12, "y":0}, + {"label":"R14", "x":13, "y":0}, + {"label":"R15", "x":14, "y":0}, + {"label":"R16", "x":15, "y":0}, + {"label":"R17", "x":16, "y":0}, + {"label":"R21", "x":10, "y":1}, + {"label":"R22", "x":11, "y":1}, + {"label":"R23", "x":12, "y":1}, + {"label":"R24", "x":13, "y":1}, + {"label":"R25", "x":14, "y":1}, + {"label":"R26", "x":15, "y":1}, + {"label":"R27", "x":16, "y":1}, + {"label":"R31", "x":10, "y":2}, + {"label":"R32", "x":11, "y":2}, + {"label":"R33", "x":12, "y":2}, + {"label":"R34", "x":13, "y":2}, + {"label":"R35", "x":14, "y":2}, + {"label":"R36", "x":15, "y":2}, + {"label":"R37", "x":16, "y":2}, + {"label":"R42", "x":11, "y":3}, + {"label":"R43", "x":12, "y":3}, + {"label":"R44", "x":13, "y":3}, + {"label":"R45", "x":14, "y":3}, + {"label":"R46", "x":15, "y":3}, + {"label":"R47", "x":16, "y":3}, + {"label":"R54", "x":13, "y":4}, + {"label":"R55", "x":14, "y":4}, + {"label":"R56", "x":15, "y":4}, + {"label":"R57", "x":16, "y":4}, + {"label":"R52", "x":11, "y":5}, + {"label":"R53", "x":12, "y":5}, + {"label":"R62", "x":9, "y":6}, + {"label":"R63", "x":10, "y":6}, + {"label":"R64", "x":9, "y":7}, + {"label":"R65", "x":10, "y":7} + ] + } + } +} diff --git a/keyboards/handwired/dactyl_manuform/6x6/info.json b/keyboards/handwired/dactyl_manuform/6x6/info.json new file mode 100644 index 0000000000..2ae91d4694 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/info.json @@ -0,0 +1,89 @@ +{ + "keyboard_name": "Dactyl Manuform 6x6", + "url": "", + "maintainer": "qmk", + "width": 17, + "height": 9, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"L05", "x":5, "y":0}, + {"label":"R00", "x":11, "y":0}, + {"label":"R01", "x":12, "y":0}, + {"label":"R02", "x":13, "y":0}, + {"label":"R03", "x":14, "y":0}, + {"label":"R04", "x":15, "y":0}, + {"label":"R05", "x":16, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"L15", "x":5, "y":1}, + {"label":"R10", "x":11, "y":1}, + {"label":"R11", "x":12, "y":1}, + {"label":"R12", "x":13, "y":1}, + {"label":"R13", "x":14, "y":1}, + {"label":"R14", "x":15, "y":1}, + {"label":"R15", "x":16, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"L25", "x":5, "y":2}, + {"label":"R20", "x":11, "y":2}, + {"label":"R21", "x":12, "y":2}, + {"label":"R22", "x":13, "y":2}, + {"label":"R23", "x":14, "y":2}, + {"label":"R24", "x":15, "y":2}, + {"label":"R25", "x":16, "y":2}, + {"label":"L30", "x":0, "y":3}, + {"label":"L31", "x":1, "y":3}, + {"label":"L32", "x":2, "y":3}, + {"label":"L33", "x":3, "y":3}, + {"label":"L34", "x":4, "y":3}, + {"label":"L35", "x":5, "y":3}, + {"label":"R30", "x":11, "y":3}, + {"label":"R31", "x":12, "y":3}, + {"label":"R32", "x":13, "y":3}, + {"label":"R33", "x":14, "y":3}, + {"label":"R34", "x":15, "y":3}, + {"label":"R35", "x":16, "y":3}, + {"label":"L40", "x":0, "y":4}, + {"label":"L41", "x":1, "y":4}, + {"label":"L42", "x":2, "y":4}, + {"label":"L43", "x":3, "y":4}, + {"label":"L44", "x":4, "y":4}, + {"label":"L45", "x":5, "y":4}, + {"label":"R40", "x":11, "y":4}, + {"label":"R41", "x":12, "y":4}, + {"label":"R42", "x":13, "y":4}, + {"label":"R43", "x":14, "y":4}, + {"label":"R44", "x":15, "y":4}, + {"label":"R45", "x":16, "y":4}, + {"label":"L52", "x":2, "y":5}, + {"label":"L53", "x":3, "y":5}, + {"label":"R52", "x":13, "y":5}, + {"label":"R53", "x":14, "y":5}, + {"label":"L54", "x":4, "y":6}, + {"label":"L55", "x":5, "y":6}, + {"label":"R50", "x":11, "y":6}, + {"label":"R51", "x":12, "y":6}, + {"label":"L64", "x":6, "y":7}, + {"label":"L65", "x":7, "y":7}, + {"label":"R60", "x":9, "y":7}, + {"label":"R61", "x":10, "y":7}, + {"label":"L62", "x":6, "y":8}, + {"label":"L63", "x":7, "y":8}, + {"label":"R62", "x":9, "y":8}, + {"label":"R63", "x":10, "y":8} + ] + } + } +} -- cgit v1.2.3 From e8f730595c37a508ad86cc46fa39c7fae4d36800 Mon Sep 17 00:00:00 2001 From: Fredric Silberberg Date: Tue, 30 Oct 2018 01:09:22 -0700 Subject: Dactyl_manuform map and updates to my ergodox layout for moving to a different location. --- .../dactyl_manuform/5x6/keymaps/333fred/config.h | 9 +++ .../dactyl_manuform/5x6/keymaps/333fred/keymap.c | 80 ++++++++++++++++++++++ .../dactyl_manuform/5x6/keymaps/333fred/rules.mk | 7 ++ 3 files changed, 96 insertions(+) create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/rules.mk (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h new file mode 100644 index 0000000000..10b9693267 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h @@ -0,0 +1,9 @@ +#pragma once + +#include "333fred_config.h" + +#define USE_SERIAL +#define EE_HANDS + +#undef TAPPING_TERM +#define TAPPING_TERM 200 diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c new file mode 100644 index 0000000000..c37009f24d --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c @@ -0,0 +1,80 @@ +#include QMK_KEYBOARD_H +#include "333fred.h" + +enum custom_macros { + DLEFT, + DRIGHT, + PSCREEN_APP +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [BASE] = LAYOUT_5x6( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + OSM(MOD_LSFT), CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, OSM(MOD_RSFT), + KC_F4, KC_F5, TG(CODEFLOW), KC_EQL, + KC_LALT, KC_BSPC, KC_SPC, OSL(VIM), + KC_TAB, TD(TD_SYM_VIM), KC_ENT, KC_RGUI, + KC_LCTL, KC_DEL, KC_UP, KC_DOWN + ), + + [CODEFLOW] = LAYOUT_5x6( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F7, KC_F8, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + + [SYMB] = LAYOUT_5x6( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_EXLM, KC_AT, KC_LPRN, KC_RPRN, KC_PIPE, _______, KC_7, KC_8, KC_9, _______, KC_F12, + _______, KC_HASH, KC_DLR, KC_LCBR, KC_RCBR, KC_GRV, _______, KC_4, KC_5, KC_6, _______, _______, + _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, _______, KC_1, KC_2, KC_3, _______, _______, + KC_F7, KC_F8, KC_0, KC_ENT, + _______, _______, KC_MPLY, KC_MNXT, + _______, _______, KC_MPRV, _______, + _______, _______, KC_VOLU, KC_VOLD + ), + + [VIM] = LAYOUT_5x6( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, + _______, _______, _______, _______, KC_LSFT, _______, _______, _______, _______, _______, _______, _______, + _______, M(DLEFT), M(DRIGHT), KC_LCTL, KC_LGUI, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case DLEFT: + if (record->event.pressed) { // Windows move desktop left + return MACRO(D(LCTL), D(LGUI), T(LEFT), U(LGUI), U(LCTL), END); + } + break; + case DRIGHT: + if (record->event.pressed) { // Windows move desktop right + return MACRO(D(LCTL), D(LGUI), T(RIGHT), U(LGUI), U(LCTL), END); + } + break; + case PSCREEN_APP: if (record->event.pressed) { + return MACRO(D(LALT), T(PSCR), U(LALT), END); + } + break; + } + return MACRO_NONE; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + tap_dance_process_record(keycode); + return true; +} diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/rules.mk b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/rules.mk new file mode 100644 index 0000000000..79ef33e7c3 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/rules.mk @@ -0,0 +1,7 @@ + +NKRO_ENABLE = yes +KEY_LOCK_ENABLE = yes +TAP_DANCE_ENABLE = yes +CONSOLE_ENABLE = no +PERMISSIVE_HOLD = yes +EXTRAFLAGS += -flto -- cgit v1.2.3 From 155e9310ff685f557287749bef2e02510538a6d9 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 15 Dec 2018 04:00:10 +0900 Subject: Make quantum/split_common/serial.[ch] configurable (#4419) * add temporary compile test shell script * add 'CONFIG_H += serial_backward_compatibility.h' into common_features.mk:SPLIT_KEYBOARD block * add quantum/split_common/serial_backward_compatibility.h SERIAL_PIN_PORT and other PIN define move to serial_backward_compatibility.h SERIAL_BACKLIT_START move to split_util.h * quantum/split_common/serial.c change to helix-serial.c style serial configuration * add temporary file quantum/split_common/split-keyboards-list.txt * add '#define SOFT_SERIAL_PIN D0' to keyboards/6lit/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/divergetm2/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/ergotravel/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/foobar/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/dactyl_manuform/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/qc60/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/handwired/xealous/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/iris/rev*/config.h * add '//#define SOFT_SERIAL_PIN D0' to keyboards/lets_split_eh/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/levinson/rev*/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/miniaxe/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/nyquist/rev?/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/quefrency/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/qwertyydox/config.h,keyboards/qwertyydox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/redox/rev1/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/rorschach/rev1/config.h * remove '#define SOFT_SERIAL_PIN D0' from quantum/split_common/serial_backward_compatibility.h * remove temporary file quantum/split_common/split-keyboards-list.txt * remove temporary compile test shell script * Revert "remove temporary compile test shell script" This reverts commit 15b0021b4092127b8d8a21f572642ad3702b46d4. * update quantum/split_common/compile_split_test.sh for new keyboard test * add '#define SOFT_SERIAL_PIN D0' to keyboards/diverge3/config.h * add '#define SOFT_SERIAL_PIN D0' to keyboards/40percentclub/25/config.h * remove temporary compile test shell script * update docs/config_options.md, quantum/template/avr/config.h * fix quantum/template/avr/config.h * fix typo docs/config_options.md --- keyboards/handwired/dactyl_manuform/config.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/config.h b/keyboards/handwired/dactyl_manuform/config.h index 320ce3c482..0e6f3f98ed 100644 --- a/keyboards/handwired/dactyl_manuform/config.h +++ b/keyboards/handwired/dactyl_manuform/config.h @@ -38,6 +38,9 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D0 + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -- cgit v1.2.3 From 306f23dc5119d864eb29cfef99ededb81075368e Mon Sep 17 00:00:00 2001 From: zvecr Date: Fri, 14 Dec 2018 20:49:33 +0000 Subject: Document the correct path to the split keyboard EEPROM files (#4585) * Document the correct path to the split keyboard EEPROM files * Document the correct path to the split keyboard EEPROM files --- keyboards/handwired/dactyl_manuform/readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards/handwired/dactyl_manuform') diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md index 00288a8768..0d08c67a08 100644 --- a/keyboards/handwired/dactyl_manuform/readme.md +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -131,13 +131,13 @@ file will run on both hands instead of having to flash left and right handed versions of the firmware to each half. To flash the EEPROM file for the left half run: ``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep" // or the equivalent in dfu-programmer ``` and similarly for right half ``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep" // or the equivalent in dfu-programmer ``` -- cgit v1.2.3