From cb4346edb74b415928e3274d166802f5afd3004d Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 13 Sep 2021 14:59:53 +0100 Subject: Migrate hadron away from QWIIC_DRIVERS (#14415) --- keyboards/hadron/ver2/keymaps/side_numpad/keymap.c | 162 ++------------------- 1 file changed, 16 insertions(+), 146 deletions(-) (limited to 'keyboards/hadron/ver2/keymaps/side_numpad') diff --git a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c index c63ae93855..74f95b4b75 100644 --- a/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c +++ b/keyboards/hadron/ver2/keymaps/side_numpad/keymap.c @@ -1,15 +1,4 @@ #include QMK_KEYBOARD_H -#include -#ifdef AUDIO_ENABLE - #include "audio.h" -#endif -#ifdef USE_I2C -#include "i2c.h" -#endif -#ifdef SSD1306OLED -#include "ssd1306.h" -#endif -extern keymap_config_t keymap_config; //Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; @@ -19,12 +8,12 @@ extern rgblight_config_t rgblight_config; // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. #define _QWERTY 0 -#define _LOWER 3 -#define _RAISE 4 -#define _FNLAYER 6 -#define _NUMLAY 7 -#define _MOUSECURSOR 8 -#define _ADJUST 16 +#define _LOWER 1 +#define _RAISE 2 +#define _FNLAYER 3 +#define _NUMLAY 4 +#define _MOUSECURSOR 5 +#define _ADJUST 6 enum preonic_keycodes { QWERTY = SAFE_RANGE, @@ -41,10 +30,7 @@ enum preonic_keycodes { RGBLED_DECREASE_SAT, RGBLED_INCREASE_VAL, RGBLED_DECREASE_VAL, -}; - -enum macro_keycodes { - KC_DEMOMACRO, + DEMOMACRO, }; // Custom macros @@ -57,7 +43,6 @@ enum macro_keycodes { #define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor #define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise #define TG_NUMLAY TG(_NUMLAY) //Toggle for layer _NUMLAY -#define DEMOMACRO M(KC_DEMOMACRO) // My login macros const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -322,29 +307,20 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + case DEMOMACRO: + if (record->event.pressed) { + SEND_STRING("hello world"); + } + return false; + break; } return true; } void matrix_init_user(void) { - #ifdef USE_I2C - i2c_master_init(); - #ifdef SSD1306OLED - // calls code for the SSD1306 OLED - _delay_ms(400); - TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000)); - iota_gfx_init(); // turns on the display - #endif - #endif - #ifdef AUDIO_ENABLE - startup_user(); - #endif -} - -void matrix_scan_user(void) { - #ifdef SSD1306OLED - iota_gfx_task(); // this is what updates the display continuously - #endif +#ifdef AUDIO_ENABLE + startup_user(); +#endif } #ifdef AUDIO_ENABLE @@ -373,109 +349,3 @@ void music_scale_user(void) } #endif - -/* - * Macro definition - */ -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - - switch (id) { - case KC_DEMOMACRO: - if (record->event.pressed){ - return MACRO (I(1), T(H),T(E),T(L), T(L), T(O), T(SPACE), T(W), T(O), T(R), T(L), T(D), END); - } - } - - return MACRO_NONE; -} - -void matrix_update(struct CharacterMatrix *dest, - const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_LOWER 8 -#define L_RAISE 16 -#define L_FNLAYER 64 -#define L_NUMLAY 128 -#define L_NLOWER 136 -#define L_NFNLAYER 192 -#define L_MOUSECURSOR 256 -#define L_ADJUST 65560 - -void iota_gfx_task_user(void) { -#if DEBUG_TO_SCREEN - if (debug_enable) { - return; - } -#endif - - struct CharacterMatrix matrix; - - matrix_clear(&matrix); - matrix_write_P(&matrix, PSTR("USB: ")); -#ifdef PROTOCOL_LUFA - switch (USB_DeviceState) { - case DEVICE_STATE_Unattached: - matrix_write_P(&matrix, PSTR("Unattached")); - break; - case DEVICE_STATE_Suspended: - matrix_write_P(&matrix, PSTR("Suspended")); - break; - case DEVICE_STATE_Configured: - matrix_write_P(&matrix, PSTR("Connected")); - break; - case DEVICE_STATE_Powered: - matrix_write_P(&matrix, PSTR("Powered")); - break; - case DEVICE_STATE_Default: - matrix_write_P(&matrix, PSTR("Default")); - break; - case DEVICE_STATE_Addressed: - matrix_write_P(&matrix, PSTR("Addressed")); - break; - default: - matrix_write_P(&matrix, PSTR("Invalid")); - } -#endif - -// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - - char buf[40]; - snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); - matrix_write_P(&matrix, PSTR("\n\nLayer: ")); - switch (layer_state) { - case L_BASE: - matrix_write_P(&matrix, PSTR("Default")); - break; - case L_RAISE: - matrix_write_P(&matrix, PSTR("Raise")); - break; - case L_LOWER: - matrix_write_P(&matrix, PSTR("Lower")); - break; - case L_ADJUST: - matrix_write_P(&matrix, PSTR("ADJUST")); - break; - default: - matrix_write(&matrix, buf); - } - - // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<