From f0b30e0027cb890c7510fa22e5824a43c0d9e86f Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 9 May 2021 23:21:09 -0700 Subject: Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. --- keyboards/gergo/gergo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/gergo') diff --git a/keyboards/gergo/gergo.c b/keyboards/gergo/gergo.c index fab8d0f44c..ba359f8145 100644 --- a/keyboards/gergo/gergo.c +++ b/keyboards/gergo/gergo.c @@ -65,7 +65,7 @@ out: return mcp23018_status; } -const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { +const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { { {0,0}, {0,7}, {2,7}, {3,7} }, { {0,8}, {1,8}, {2,8}, {3,8} }, { {0,9}, {1,9}, {2,9}, {3,9} }, -- cgit v1.2.3 From f461adbd1dffa178042a4805137918a4bec3c118 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 25 May 2021 09:24:01 -0700 Subject: [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) --- keyboards/gergo/keymaps/drashna/keymap.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'keyboards/gergo') diff --git a/keyboards/gergo/keymaps/drashna/keymap.c b/keyboards/gergo/keymaps/drashna/keymap.c index ecf5f39031..81ff6852d1 100644 --- a/keyboards/gergo/keymaps/drashna/keymap.c +++ b/keyboards/gergo/keymaps/drashna/keymap.c @@ -87,12 +87,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________ ), - [_MODS] = LAYOUT_gergo_wrapper( - _______, ___________________BLANK___________________, ___________________BLANK___________________, _______, - _______, ___________________BLANK___________________, _______, _______, ___________________BLANK___________________, _______, - KC_LSFT, ___________________BLANK___________________, _______, _______, _______, _______, ___________________BLANK___________________, KC_RSFT, - _______, _______, _______, _______, _______, _______, _______, _______ - ), [_LOWER] = LAYOUT_gergo_wrapper( KC_F12, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11, _______, _________________LOWER_L2__________________, _______, _______, _________________LOWER_R2__________________, KC_PIPE, -- cgit v1.2.3 From eb46c954dcf99d842967cc6095827316ffddd291 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 26 Jul 2021 17:59:49 -0700 Subject: [Keymap] Drashna's Defaults cleanup (#13722) --- keyboards/gergo/keymaps/drashna/keymap.c | 46 ++++++++------------------------ 1 file changed, 11 insertions(+), 35 deletions(-) (limited to 'keyboards/gergo') diff --git a/keyboards/gergo/keymaps/drashna/keymap.c b/keyboards/gergo/keymaps/drashna/keymap.c index 81ff6852d1..01d52ed162 100644 --- a/keyboards/gergo/keymaps/drashna/keymap.c +++ b/keyboards/gergo/keymaps/drashna/keymap.c @@ -37,56 +37,32 @@ KC_GRV, KC_SPC, BK_LWER, OS_LALT, OS_RGUI, DL_RAIS, KC_ENT, _______ \ ) -#define LAYOUT_gergo_base_wrapper(...) LAYOUT_gergo_base(__VA_ARGS__) +#define LAYOUT_base_wrapper(...) LAYOUT_gergo_base(__VA_ARGS__) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_gergo_base_wrapper( + [_DEFAULT_LAYER_1] = LAYOUT_base_wrapper( _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, _________________QWERTY_L3_________________, _________________QWERTY_R3_________________ - ), - [_COLEMAK] = LAYOUT_gergo_base_wrapper( + ), + + [_DEFAULT_LAYER_2] = LAYOUT_base_wrapper( + ______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________, + ______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________, + ______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________ + ), + [_DEFAULT_LAYER_3] = LAYOUT_base_wrapper( _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, _________________COLEMAK_L3________________, _________________COLEMAK_R3________________ ), - [_DVORAK] = LAYOUT_gergo_base_wrapper( + [_DEFAULT_LAYER_4] = LAYOUT_base_wrapper( _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, _________________DVORAK_L3_________________, _________________DVORAK_R3_________________ ), - [_WORKMAN] = LAYOUT_gergo_base_wrapper( - _________________WORKMAN_L1________________, _________________WORKMAN_R1________________, - _________________WORKMAN_L2________________, _________________WORKMAN_R2________________, - _________________WORKMAN_L3________________, _________________WORKMAN_R3________________ - ), - - [_NORMAN] = LAYOUT_gergo_base_wrapper( - _________________NORMAN_L1_________________, _________________NORMAN_L1_________________, - _________________NORMAN_L2_________________, _________________NORMAN_R2_________________, - _________________NORMAN_L3_________________, _________________NORMAN_R3_________________ - ), - - [_MALTRON] = LAYOUT_gergo_base_wrapper( - _________________MALTRON_L1________________, _________________MALTRON_R1________________, - _________________MALTRON_L2________________, _________________MALTRON_R2________________, - _________________MALTRON_L3________________, _________________MALTRON_R3________________ - ), - - [_EUCALYN] = LAYOUT_gergo_base_wrapper( - _________________EUCALYN_L1________________, _________________EUCALYN_R1________________, - _________________EUCALYN_L2________________, _________________EUCALYN_R2________________, - _________________EUCALYN_L3________________, _________________EUCALYN_R3________________ - ), - - [_CARPLAX] = LAYOUT_gergo_base_wrapper( - _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________, - _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________, - _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________ - ), - [_LOWER] = LAYOUT_gergo_wrapper( KC_F12, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11, _______, _________________LOWER_L2__________________, _______, _______, _________________LOWER_R2__________________, KC_PIPE, -- cgit v1.2.3 From a03aa301def77c867ae6c6c840f7fc82b26d91d6 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 6 Aug 2021 23:59:56 -0700 Subject: Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta --- keyboards/gergo/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/gergo') diff --git a/keyboards/gergo/rules.mk b/keyboards/gergo/rules.mk index 41f201a458..9b4a8d6fbc 100644 --- a/keyboards/gergo/rules.mk +++ b/keyboards/gergo/rules.mk @@ -15,7 +15,7 @@ CUSTOM_MATRIX = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite DEBOUNCE_TYPE = eager_pr SRC += matrix.c -- cgit v1.2.3 From c0628c2820b436550f62af5f6b7fae1f66b0bf8b Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 9 Aug 2021 19:46:18 +0100 Subject: Remove backwards compatibility of debounce names (#13877) * Remove backwards compatibility of debounce names * Update docs * Update keyboards/keymaps --- keyboards/gergo/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'keyboards/gergo') diff --git a/keyboards/gergo/rules.mk b/keyboards/gergo/rules.mk index 9b4a8d6fbc..6a1d073246 100644 --- a/keyboards/gergo/rules.mk +++ b/keyboards/gergo/rules.mk @@ -17,6 +17,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -DEBOUNCE_TYPE = eager_pr +DEBOUNCE_TYPE = sym_eager_pr SRC += matrix.c QUANTUM_LIB_SRC += i2c_master.c -- cgit v1.2.3 From 4e1c5887c5c08ebd2cf7868c8d9292aa728e7bf0 Mon Sep 17 00:00:00 2001 From: Xelus22 <17491233+Xelus22@users.noreply.github.com> Date: Tue, 24 Aug 2021 16:28:26 +1000 Subject: [Core] Refactor OLED to allow easy addition of other types (#13454) * add docs * core changes * update keyboards to new OLED * updated users to new OLED * update layouts to new OLED * fixup docs * drashna's suggestion * fix up docs * new keyboards with oled * core split changes * remaining keyboard files * Fix The Helix keyboards oled options * reflect develop Co-authored-by: Drashna Jaelre Co-authored-by: mtei <2170248+mtei@users.noreply.github.com> --- keyboards/gergo/keymaps/oled/keymap.c | 2 +- keyboards/gergo/keymaps/oled/rules.mk | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'keyboards/gergo') diff --git a/keyboards/gergo/keymaps/oled/keymap.c b/keyboards/gergo/keymaps/oled/keymap.c index c348a2b96d..7e19a799ee 100644 --- a/keyboards/gergo/keymaps/oled/keymap.c +++ b/keyboards/gergo/keymaps/oled/keymap.c @@ -125,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) */ -#ifdef OLED_DRIVER_ENABLE +#ifdef OLED_ENABLE oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } diff --git a/keyboards/gergo/keymaps/oled/rules.mk b/keyboards/gergo/keymaps/oled/rules.mk index 1661d43d1f..6318088988 100644 --- a/keyboards/gergo/keymaps/oled/rules.mk +++ b/keyboards/gergo/keymaps/oled/rules.mk @@ -7,7 +7,8 @@ BALLER = no # Enable to ball out BALLSTEP = 20 # Multiple in px to move, multiplied by layer number SCROLLSTEP = 1 # Lines to scroll with ball MOUSEKEY_ENABLE = yes # Mouse keys, needed for baller -OLED_DRIVER_ENABLE = yes +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 LOCAL_GLCDFONT = yes #Debug options -- cgit v1.2.3