From a3e057e779ae1d9f827a859722428f03c2b118f1 Mon Sep 17 00:00:00 2001 From: Eugene-Yuan Kou Date: Wed, 11 May 2022 00:00:30 +0800 Subject: Adding akira (#16982) * keyboard:akira initial commit * Update keyboards/ekow/akira/akira.h Co-authored-by: Joel Challis * Update keyboards/ekow/akira/keymaps/via/rules.mk Co-authored-by: Joel Challis * Update keyboards/ekow/akira/readme.md Co-authored-by: Joel Challis * Update .gitignore Co-authored-by: Joel Challis * Update readme.md * Update keyboards/ekow/akira/rules.mk Co-authored-by: Drashna Jaelre * Update rules.mk remove redundant content. * added keyboard/ekow/keymaps/via/keymap.c * remove .ccls-cache * add instructions of enter the bootloader * add instructions of enter the bootloader * modify ekow/akira:via * Update keyboards/ekow/akira/readme.md Co-authored-by: Ryan * Update keyboards/ekow/akira/keymaps/via/rules.mk Co-authored-by: Ryan Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/ekow/akira/readme.md | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 keyboards/ekow/akira/readme.md (limited to 'keyboards/ekow/akira/readme.md') diff --git a/keyboards/ekow/akira/readme.md b/keyboards/ekow/akira/readme.md new file mode 100644 index 0000000000..e1a0c90366 --- /dev/null +++ b/keyboards/ekow/akira/readme.md @@ -0,0 +1,24 @@ +# AKIRA + +* Keyboard Maintainer: [eugenepy](https://github.com/eugenepy) +* Hardware Supported: AKIRA pcb, both Hotswap and solderable. +* Hardware Availability: Not yet on groupbuy + +# Build +Make example for this keyboard (after setting up your build environment): + + make ekow/akira:default + +Flashing example for this keyboard: + + make ekow/akira:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + -- cgit v1.2.3