From 0694decfa1254703690cd11ee5996e8a1a09b8a1 Mon Sep 17 00:00:00 2001 From: William Chang Date: Sat, 13 Jul 2019 13:12:37 -0700 Subject: [Keymap] switch backspace and backslash, updated readme (#6323) --- keyboards/dz60/keymaps/billiams/readme.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'keyboards/dz60/keymaps/billiams/readme.md') diff --git a/keyboards/dz60/keymaps/billiams/readme.md b/keyboards/dz60/keymaps/billiams/readme.md index 5c0431e238..0f917bf415 100644 --- a/keyboards/dz60/keymaps/billiams/readme.md +++ b/keyboards/dz60/keymaps/billiams/readme.md @@ -12,6 +12,7 @@ Settings: * RESET is available as `Fn`+ ` ESC` * Underglow toggle is available as `Fn` + `Q`. Yes your keyboard has lights even if you didn't get the LEDs. Bonus! * vim-style arrow key bindings H J K L in layer 1 +* The `Bkspc` and `\` keys have been swapped, the reach was too great to have backspace on the top row ### Initial Installation @@ -35,16 +36,16 @@ A hex file `dz60_billiams.hex` will be created in the base qmk_firmware director 5. Holding those keys down, plug the keyboard into your computer, which will put the keyboard in bootlegger mode 6. If you are using [QMK toolbox](https://github.com/qmk/qmk_toolbox/releases), upload the .hex file you made above, select it and hit the flash button. For the love of all that is good and holy on Earth, don't hit the load button, that will load the default keymap and that's not what you want! Unless it is, in which case click away. -Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard. +Note: If you didn't follow my instructions in 4 and accidentally loaded the default keymap, then to `RESET` the keyboard and kick it into bootleg mode again, hold the `down arrow` key and `\`. The default layout is Build 1 and sets the `MENU` key on that build to `Fn`. `MENU` corresponds to `down arrow` in build 4. Note that you don't have to unplug the keyboard. Hope this helps! ### 0 Qwerty ``` ,-----------------------------------------------------------------------------------------. -| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | +| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | |-----------------------------------------------------------------------------------------+ -| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | +| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bkspc | |-----------------------------------------------------------------------------------------+ | Fn | A | S | D | F | G | H | J | K | L | ; | ' | Enter | |-----------------------------------------------------------------------------------------+ @@ -69,4 +70,3 @@ FN Layer | | | | | | | HOME | PG_DN | END | `-----------------------------------------------------------------------------------------' ``` - -- cgit v1.2.3