From e646ec20243f6e628d4b295fae830bdfdd219bad Mon Sep 17 00:00:00 2001
From: mechlovin <57231893+mechlovin@users.noreply.github.com>
Date: Mon, 19 Jun 2023 12:23:11 +0700
Subject: [Keyboard] Add support for Alveus MX PCB (#21238)

Co-authored-by: jack <0x6a73@protonmail.com>
---
 keyboards/densus/alveus/mx/readme.md | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 keyboards/densus/alveus/mx/readme.md

(limited to 'keyboards/densus/alveus/mx/readme.md')

diff --git a/keyboards/densus/alveus/mx/readme.md b/keyboards/densus/alveus/mx/readme.md
new file mode 100644
index 0000000000..3a90c9b0f3
--- /dev/null
+++ b/keyboards/densus/alveus/mx/readme.md
@@ -0,0 +1,26 @@
+# Alveus
+
+![Alveus PCB](https://i.imgur.com/tZKcLiMh.png)
+
+A MX PCB for Alveus FRL keyboard.
+
+* Keyboard Maintainer: [Mechlovin' Studio](https://mechlovin.studio/)
+* Hardware Supported: Alveus, APM32F103 
+* Hardware Availability: [Densus](https://www.instagram.com/densusdesign/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make densus/alveus/mx:default
+
+Flashing example for this keyboard:
+
+    make densus/alveus/mx:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+Enter the bootloader in 4 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
+* **Hardware reset**: Press reset button (located on the bottom side of the PCB) 
\ No newline at end of file
-- 
cgit v1.2.3