From 79c8f035ccfcc7d0eba1aa7bc96ad5e0e78ddcd4 Mon Sep 17 00:00:00 2001 From: KnoblesseOblige <63174954+KnoblesseOblige@users.noreply.github.com> Date: Thu, 22 Jul 2021 20:47:32 -0500 Subject: [Keyboard] Added Crin keyboard (#13630) Co-authored-by: Ryan --- keyboards/crin/readme.md | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 keyboards/crin/readme.md (limited to 'keyboards/crin/readme.md') diff --git a/keyboards/crin/readme.md b/keyboards/crin/readme.md new file mode 100644 index 0000000000..36a2080c42 --- /dev/null +++ b/keyboards/crin/readme.md @@ -0,0 +1,20 @@ +# Bachoo Crin + +Crin is an F-rowless 65%. + +* Keyboard Maintainer: [KnoblesseOblige](https://github.com/KnoblesseOblige) +* Hardware Supported: STM32F303CBT +* Hardware Availability: TBD + +Make example for this keyboard (after setting up your build environment): + + make crin:default:flash + +To enter the bootloader either: + +0. Hold Esc while plugging the PCB in, if BOOTMAGIC lite is enabled. +0. Press the RESET keycode, if programmed on the keymap. +0. Slide the switch just below the reset button to the left and press the reset button. + * Please note that you must slide it back to the right for the PCB to boot QMK again. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.3