From 546e6a15dcad55e2b370dddf417d83ae88e87217 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Wed, 27 Oct 2021 23:02:21 +0800 Subject: [Keyboard] Cradio keyboard (#14946) Co-authored-by: Ryan Co-authored-by: filterpaper --- keyboards/cradio/readme.md | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 keyboards/cradio/readme.md (limited to 'keyboards/cradio/readme.md') diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md new file mode 100644 index 0000000000..b8520a366b --- /dev/null +++ b/keyboards/cradio/readme.md @@ -0,0 +1,33 @@ +# Cradio keyboards + +![Cradio](https://github.com/davidphilipbarr/hypergolic/raw/main/hypergarlic/ht.png) + +Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](https://github.com/davidphilipbarr), with no diodes and direct micro-controller pin wiring. + +## Keyboard Info + +* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr) +* Hardware Supported: + * [Sweep](https://github.com/davidphilipbarr/Sweep) + * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic) + * Variants of the same 34-key direct pin PCB +* Hardware Availability: PCBs can be printed with gerber files from the repository + +Make examples for this keyboard (after setting up your build environment): + + make cradio:default + +Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following: + + make cradio:default:dfu-split-left + make cradio:default:dfu-split-right + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. +* **Physical reset button**: Briefly press the reset button soldered on the PCB. +* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. -- cgit v1.2.3