From 3303f7ea5d711072dcb6fe61078a91a30160f3c7 Mon Sep 17 00:00:00 2001 From: Cipulot <40441626+Cipulot@users.noreply.github.com> Date: Thu, 23 Mar 2023 11:05:49 +0100 Subject: EC 60 PCB (#20050) * Add EC 60 PCB firmware * Moved from data driven row/col def to config def * Implemented proper LAYOUT_ changes * Removed unnecessary `.h` includes * Added `DISCHARGE_TIME` Addition of a `DISCHARGE_TIME` time. This is to ensure that the ghost capacitor that is the row strobed for the ADC read, is fully drained and doesn't carry charges that deviates the readings. Tested on multiple hardware and confirmed working and improving the readings, both in terms of stability and consistency for baseline noise. * Update readme.md Added missing `cipulot/`in readme example commands * Update keyboards/cipulot/ec_60/readme.md Co-authored-by: Tom Barnes * Removal of `info.json` lines as suggested * Update to comply with `_kb` and `_user` separation * Update keyboards/cipulot/ec_60/rules.mk Co-authored-by: Drashna Jaelre --------- Co-authored-by: Tom Barnes Co-authored-by: Drashna Jaelre --- keyboards/cipulot/ec_60/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/cipulot/ec_60/readme.md (limited to 'keyboards/cipulot/ec_60/readme.md') diff --git a/keyboards/cipulot/ec_60/readme.md b/keyboards/cipulot/ec_60/readme.md new file mode 100644 index 0000000000..a171bdfd4e --- /dev/null +++ b/keyboards/cipulot/ec_60/readme.md @@ -0,0 +1,27 @@ +# EC 60 + +![EC 60 PCB](https://i.imgur.com/XNwsVOnh.png) + +60% Electrostatic Capacitive PCB, GH60 mounting compatible, with multi-layout support + +* Keyboard Maintainer: [cipulot](https://github.com/Cipulot) +* Hardware Supported: EC 60 +* Hardware Availability: [Github](https://github.com/Cipulot/EC60) + +Make example for this keyboard (after setting up your build environment): + + make cipulot/ec_60:default + +Flashing example for this keyboard: + + make cipulot/ec_60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical Boot0 pins**: Short the Boot0 pins on the back of the PCB while plugging in the keyboard +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available -- cgit v1.2.3