From 1bfbaae533fd4716407a5f381df1a3b317963a92 Mon Sep 17 00:00:00 2001 From: weteor <79446655+weteor@users.noreply.github.com> Date: Thu, 19 Aug 2021 20:13:00 +0200 Subject: [Keyboard] add 3w6 (#13746) --- keyboards/3w6/rev1/matrix.c | 280 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 280 insertions(+) create mode 100644 keyboards/3w6/rev1/matrix.c (limited to 'keyboards/3w6/rev1/matrix.c') diff --git a/keyboards/3w6/rev1/matrix.c b/keyboards/3w6/rev1/matrix.c new file mode 100644 index 0000000000..7262fd22e6 --- /dev/null +++ b/keyboards/3w6/rev1/matrix.c @@ -0,0 +1,280 @@ +/* +Copyright 2013 Oleg Kostyuk + 2020 Pierre Chevalier + 2021 weteor + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * This code was heavily inspired by the ergodox_ez keymap, and modernized + * to take advantage of the quantum.h microcontroller agnostics gpio control + * abstractions and use the macros defined in config.h for the wiring as opposed + * to repeating that information all over the place. + */ + +#include QMK_KEYBOARD_H +#include "i2c_master.h" + +extern i2c_status_t tca9555_status; +#define I2C_TIMEOUT 1000 + +// I2C address: +// All address pins of the tca9555 are connected to the ground +// | 0 | 1 | 0 | 0 | A2 | A1 | A0 | +// | 0 | 1 | 0 | 0 | 0 | 0 | 0 | +#define I2C_ADDR 0b0100000 +#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE) +#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ) + +// Register addresses +#define IODIRA 0x06 // i/o direction register +#define IODIRB 0x07 +#define IREGP0 0x00 // GPIO pull-up resistor register +#define IREGP1 0x01 +#define OREGP0 0x02 // general purpose i/o port register (write modifies OLAT) +#define OREGP1 0x03 + +bool i2c_initialized = 0; +i2c_status_t tca9555_status = I2C_ADDR; + +uint8_t init_tca9555(void) { + print("starting init"); + tca9555_status = I2C_ADDR; + + // I2C subsystem + if (i2c_initialized == 0) { + i2c_init(); // on pins D(1,0) + i2c_initialized = true; + wait_ms(I2C_TIMEOUT); + } + + // set pin direction + // - unused : input : 1 + // - input : input : 1 + // - driving : output : 0 + tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT); + if (tca9555_status) goto out; + // This means: write on pin 5 of port 0, read on rest + tca9555_status = i2c_write(0b11011111, I2C_TIMEOUT); + if (tca9555_status) goto out; + // This means: we will write on pins 0 to 2 on port 1. read rest + tca9555_status = i2c_write(0b11111000, I2C_TIMEOUT); + if (tca9555_status) goto out; + +out: + i2c_stop(); + return tca9555_status; +} + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; // debounced values + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +static uint8_t tca9555_reset_loop; + +void matrix_init_custom(void) { + // initialize row and col + + tca9555_status = init_tca9555(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } +} + +void matrix_power_up(void) { + tca9555_status = init_tca9555(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } +} + +// Reads and stores a row, returning +// whether a change occurred. +static inline bool store_matrix_row(matrix_row_t current_matrix[], uint8_t index) { + matrix_row_t temp = read_cols(index); + if (current_matrix[index] != temp) { + current_matrix[index] = temp; + return true; + } + return false; +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + if (tca9555_status) { // if there was an error + if (++tca9555_reset_loop == 0) { + // since tca9555_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + dprint("trying to reset tca9555\n"); + tca9555_status = init_tca9555(); + if (tca9555_status) { + dprint("right side not responding\n"); + } else { + dprint("right side attached\n"); + } + } + } + + bool changed = false; + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + // select rows from left and right hands + uint8_t left_index = i; + uint8_t right_index = i + MATRIX_ROWS_PER_SIDE; + select_row(left_index); + select_row(right_index); + + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. + + changed |= store_matrix_row(current_matrix, left_index); + changed |= store_matrix_row(current_matrix, right_index); + + unselect_rows(); + } + + return changed; +} + +static void init_cols(void) { + // init on tca9555 + // not needed, already done as part of init_tca9555() + + // init on mcu + pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L; + for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) { + pin_t pin = matrix_col_pins_mcu[pin_index]; + setPinInput(pin); + writePinHigh(pin); + } +} + +static matrix_row_t read_cols(uint8_t row) { + if (row < MATRIX_ROWS_PER_SIDE) { + pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L; + matrix_row_t current_row_value = 0; + // For each col... + for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) { + // Select the col pin to read (active low) + uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]); + + // Populate the matrix row with the state of the col pin + current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + return current_row_value; + } else { + if (tca9555_status) { // if there was an error + return 0; + } else { + uint8_t data = 0; + uint8_t port0 = 0; + uint8_t port1 = 0; + tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_read_ack(I2C_TIMEOUT); + if (tca9555_status < 0) goto out; + port0 = (uint8_t)tca9555_status; + tca9555_status = i2c_read_nack(I2C_TIMEOUT); + if (tca9555_status < 0) goto out; + port1 = (uint8_t)tca9555_status; + + // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. + // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. + // Since the pins are not ordered sequentially, we have to build the correct dataset from the two ports. Refer to the schematic to see where every pin is connected. + data |= ( port0 & 0x01 ); + data |= ( port0 & 0x02 ); + data |= ( port1 & 0x10 ) >> 2; + data |= ( port1 & 0x08 ); + data |= ( port0 & 0x40 ) >> 2; + data = ~(data); + + tca9555_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + return data; + } + } +} + +static void unselect_rows(void) { + // no need to unselect on tca9555, because the select step sets all + // the other row bits high, and it's not changing to a different + // direction + + // unselect rows on microcontroller + pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L; + for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) { + pin_t pin = matrix_row_pins_mcu[pin_index]; + setPinInput(pin); + writePinLow(pin); + } +} + +static void select_row(uint8_t row) { + uint8_t port0 = 0xff; + uint8_t port1 = 0xff; + + if (row < MATRIX_ROWS_PER_SIDE) { + // select on atmega32u4 + pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L; + pin_t pin = matrix_row_pins_mcu[row]; + setPinOutput(pin); + writePinLow(pin); + } else { + // select on tca9555 + if (tca9555_status) { // if there was an error + // do nothing + } else { + switch(row) { + case 4: port1 &= ~(1 << 0); break; + case 5: port1 &= ~(1 << 1); break; + case 6: port1 &= ~(1 << 2); break; + case 7: port0 &= ~(1 << 5); break; + default: break; + } + + tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_write(OREGP0, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_write(port0, I2C_TIMEOUT); + if (tca9555_status) goto out; + tca9555_status = i2c_write(port1, I2C_TIMEOUT); + if (tca9555_status) goto out; + // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. + // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. + out: + i2c_stop(); + } + } +} -- cgit v1.2.3