From 11f07249513825677fa6b386f74ee6b368ea3e57 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Sat, 19 Dec 2015 19:00:59 +0200 Subject: Further clarifies README --- keyboard/ergodox_ez/README.md | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'keyboard/ergodox_ez/README.md') diff --git a/keyboard/ergodox_ez/README.md b/keyboard/ergodox_ez/README.md index cf40f79b23..de6b8edf90 100644 --- a/keyboard/ergodox_ez/README.md +++ b/keyboard/ergodox_ez/README.md @@ -16,9 +16,11 @@ This requires a little bit of familiarity with coding. 1. Go to https://github.com/jackhumbert/qmk_firmware and read the Readme at the base of this repository, top to bottom. Then come back here :) 2. Clone the repository (download it) 3. Set up a build environment as per https://www.pjrc.com/teensy/gcc.html -4. Customize the firmware to your liking and compile it -5. Flash it using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 above. -6. Submit your work as a pull request to this repository, so others can also use it. :) +4. Copy keymaps/keymap_default.c into keymaps/your_keymap_name.c +5. Edit this file, changing keycodes to your liking (see "Finding the keycodes you need" below). Try to edit the comments as well, so the "text graphics" represent your layout correctly. +6. Compile your firmware by running `make clean` followed by `make KEYMAP=your_keymap_name`. This will result in a hex file. +6. Flash this hex file using the [Teensy loader](https://www.pjrc.com/teensy/loader.html) as described in step 4 in the "Easy Way" above. +7. Submit your work as a pull request to this repository, so others can also use it. :) Good luck! :) -- cgit v1.2.3