From 0452ad94791c99572c88af3cd5489ef3c0f9970f Mon Sep 17 00:00:00 2001
From: MasterSpoon <84671859+MasterSpoon@users.noreply.github.com>
Date: Mon, 7 Feb 2022 03:04:43 +1000
Subject: Add RGB matrix & LED Matrix support for IS31FL3742A, IS31FL3743A,
IS31FL3745, IS31FL3746A (#14989)
Co-authored-by: Xelus22 <17491233+Xelus22@users.noreply.github.com>
---
drivers/led/issi/is31flcommon.c | 230 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 230 insertions(+)
create mode 100644 drivers/led/issi/is31flcommon.c
(limited to 'drivers/led/issi/is31flcommon.c')
diff --git a/drivers/led/issi/is31flcommon.c b/drivers/led/issi/is31flcommon.c
new file mode 100644
index 0000000000..9f4b2123ff
--- /dev/null
+++ b/drivers/led/issi/is31flcommon.c
@@ -0,0 +1,230 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ * Copyright 2020 MelGeek
+ * Copyright 2021 MasterSpoon
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "is31flcommon.h"
+#include "i2c_master.h"
+#include "wait.h"
+#include
+
+// Set defaults for Timeout and Persistence
+#ifndef ISSI_TIMEOUT
+# define ISSI_TIMEOUT 100
+#endif
+#ifndef ISSI_PERSISTENCE
+# define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the PWM & scaling registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS];
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+
+uint8_t g_scaling_buffer[DRIVER_COUNT][ISSI_SCALING_SIZE];
+bool g_scaling_buffer_update_required[DRIVER_COUNT] = {false};
+
+// For writing of single register entry
+void IS31FL_write_single_register(uint8_t addr, uint8_t reg, uint8_t data) {
+ // Set register address and register data ready to write
+ g_twi_transfer_buffer[0] = reg;
+ g_twi_transfer_buffer[1] = data;
+
+#if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
+ }
+#else
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+#endif
+}
+
+// For writing of mulitple register entries to make use of address auto increment
+// Once the controller has been called and we have written the first bit of data
+// the controller will move to the next register meaning we can write sequential blocks.
+bool IS31FL_write_multi_registers(uint8_t addr, uint8_t *source_buffer, uint8_t buffer_size, uint8_t transfer_size, uint8_t start_reg_addr) {
+ // Split the buffer into chunks to transfer
+ for (int i = 0; i < buffer_size; i += transfer_size) {
+ // Set the first entry of transfer buffer to the first register we want to write
+ g_twi_transfer_buffer[0] = i + start_reg_addr;
+ // Copy the section of our source buffer into the transfer buffer after first register address
+ memcpy(g_twi_transfer_buffer + 1, source_buffer + i, transfer_size);
+
+#if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+ }
+#else
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+#endif
+ }
+ return true;
+}
+
+void IS31FL_unlock_register(uint8_t addr, uint8_t page) {
+ // unlock the command register and select Page to write
+ IS31FL_write_single_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, ISSI_REGISTER_UNLOCK);
+ IS31FL_write_single_register(addr, ISSI_COMMANDREGISTER, page);
+}
+
+void IS31FL_common_init(uint8_t addr, uint8_t ssr) {
+ // Setup phase, need to take out of software shutdown and configure
+ // ISSI_SSR_x is passed to allow Master / Slave setting where applicable
+
+ // Unlock the command register & select Function Register
+ IS31FL_unlock_register(addr, ISSI_PAGE_FUNCTION);
+ // Set Configuration Register to remove Software shutdown
+ IS31FL_write_single_register(addr, ISSI_REG_CONFIGURATION, ISSI_CONFIGURATION);
+ // Set Golbal Current Control Register
+ IS31FL_write_single_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
+ // Set Pull up & Down for SWx CSy
+ IS31FL_write_single_register(addr, ISSI_REG_PULLDOWNUP, ISSI_PULLDOWNUP);
+// Set Tempature Status
+#ifdef ISSI_REG_TEMP
+ IS31FL_write_single_register(addr, ISSI_REG_TEMP, ISSI_TEMP);
+#endif
+ // Set Spread Spectrum Register, passed through as sets SYNC function
+ IS31FL_write_single_register(addr, ISSI_REG_SSR, ssr);
+// Set PWM Frequency Enable Register if applicable
+#ifdef ISSI_REG_PWM_ENABLE
+ IS31FL_write_single_register(addr, ISSI_REG_PWM_ENABLE, ISSI_PWM_ENABLE);
+#endif
+// Set PWM Frequency Register if applicable
+#ifdef ISSI_REG_PWM_SET
+ IS31FL_write_single_register(addr, ISSI_REG_PWM_SET, ISSI_PWM_SET);
+#endif
+
+ // Wait 10ms to ensure the device has woken up.
+ wait_ms(10);
+}
+
+void IS31FL_common_update_pwm_register(uint8_t addr, uint8_t index) {
+ if (g_pwm_buffer_update_required[index]) {
+ // Queue up the correct page
+ IS31FL_unlock_register(addr, ISSI_PAGE_PWM);
+ // Hand off the update to IS31FL_write_multi_registers
+ IS31FL_write_multi_registers(addr, g_pwm_buffer[index], ISSI_MAX_LEDS, ISSI_PWM_TRF_SIZE, ISSI_PWM_REG_1ST);
+ // Update flags that pwm_buffer has been updated
+ g_pwm_buffer_update_required[index] = false;
+ }
+}
+
+#ifdef ISSI_MANUAL_SCALING
+void IS31FL_set_manual_scaling_buffer(void) {
+ for (int i = 0; i < ISSI_MANUAL_SCALING; i++) {
+ is31_led scale = g_is31_scaling[i];
+ if (scale.driver >= 0 && scale.driver < DRIVER_LED_TOTAL) {
+ is31_led led = g_is31_leds[scale.driver];
+
+# ifdef RGB_MATRIX_ENABLE
+ g_scaling_buffer[led.driver][led.r] = scale.r;
+ g_scaling_buffer[led.driver][led.g] = scale.g;
+ g_scaling_buffer[led.driver][led.b] = scale.b;
+# elif defined(LED_MATRIX_ENABLE)
+ g_scaling_buffer[led.driver][led.v] = scale.v;
+# endif
+ g_scaling_buffer_update_required[led.driver] = true;
+ }
+ }
+}
+#endif
+
+void IS31FL_common_update_scaling_register(uint8_t addr, uint8_t index) {
+ if (g_scaling_buffer_update_required[index]) {
+ // Queue up the correct page
+ IS31FL_unlock_register(addr, ISSI_PAGE_SCALING);
+ // Hand off the update to IS31FL_write_multi_registers
+ IS31FL_write_multi_registers(addr, g_scaling_buffer[index], ISSI_SCALING_SIZE, ISSI_SCALING_TRF_SIZE, ISSI_SCL_REG_1ST);
+ // Update flags that scaling_buffer has been updated
+ g_scaling_buffer_update_required[index] = false;
+ }
+}
+
+#ifdef RGB_MATRIX_ENABLE
+// Colour is set by adjusting PWM register
+void IS31FL_RGB_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+ if (index >= 0 && index < DRIVER_LED_TOTAL) {
+ is31_led led = g_is31_leds[index];
+
+ g_pwm_buffer[led.driver][led.r] = red;
+ g_pwm_buffer[led.driver][led.g] = green;
+ g_pwm_buffer[led.driver][led.b] = blue;
+ g_pwm_buffer_update_required[led.driver] = true;
+ }
+}
+
+void IS31FL_RGB_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+ for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+ IS31FL_RGB_set_color(i, red, green, blue);
+ }
+}
+
+// Setup Scaling register that decides the peak current of each LED
+void IS31FL_RGB_set_scaling_buffer(uint8_t index, bool red, bool green, bool blue) {
+ is31_led led = g_is31_leds[index];
+ if (red) {
+ g_scaling_buffer[led.driver][led.r] = ISSI_SCAL_RED;
+ } else {
+ g_scaling_buffer[led.driver][led.r] = ISSI_SCAL_RED_OFF;
+ }
+ if (green) {
+ g_scaling_buffer[led.driver][led.g] = ISSI_SCAL_GREEN;
+ } else {
+ g_scaling_buffer[led.driver][led.g] = ISSI_SCAL_GREEN_OFF;
+ }
+ if (blue) {
+ g_scaling_buffer[led.driver][led.b] = ISSI_SCAL_BLUE;
+ } else {
+ g_scaling_buffer[led.driver][led.b] = ISSI_SCAL_BLUE_OFF;
+ }
+ g_scaling_buffer_update_required[led.driver] = true;
+}
+
+#elif defined(LED_MATRIX_ENABLE)
+// LED Matrix Specific scripts
+void IS31FL_simple_set_scaling_buffer(uint8_t index, bool value) {
+ is31_led led = g_is31_leds[index];
+ if (value) {
+ g_scaling_buffer[led.driver][led.v] = ISSI_SCAL_LED;
+ } else {
+ g_scaling_buffer[led.driver][led.v] = ISSI_SCAL_LED_OFF;
+ }
+ g_scaling_buffer_update_required[led.driver] = true;
+}
+
+void IS31FL_simple_set_brightness(int index, uint8_t value) {
+ if (index >= 0 && index < DRIVER_LED_TOTAL) {
+ is31_led led = g_is31_leds[index];
+ g_pwm_buffer[led.driver][led.v] = value;
+ g_pwm_buffer_update_required[led.driver] = true;
+ }
+}
+
+void IS31FL_simple_set_brigntness_all(uint8_t value) {
+ for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+ IS31FL_simple_set_brightness(i, value);
+ }
+}
+#endif
--
cgit v1.2.3