From c66df1664497546f32662409778731143e45a552 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 28 Nov 2020 12:02:18 -0800 Subject: 2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change --- docs/feature_sequencer.md | 88 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 docs/feature_sequencer.md (limited to 'docs/feature_sequencer.md') diff --git a/docs/feature_sequencer.md b/docs/feature_sequencer.md new file mode 100644 index 0000000000..8c8587a9b8 --- /dev/null +++ b/docs/feature_sequencer.md @@ -0,0 +1,88 @@ +# Sequencer + +Since QMK has experimental support for MIDI, you can now turn your keyboard into a [step sequencer](https://en.wikipedia.org/wiki/Music_sequencer#Step_sequencers)! + +!> **IMPORTANT:** This feature is highly experimental, it has only been tested on a Planck EZ so far. Also, the scope will be limited to support the drum machine use-case to start with. + +## Enable the step sequencer + +Add the following line to your `rules.mk`: + +```make +SEQUENCER_ENABLE = yes +``` + +By default the sequencer has 16 steps, but you can override this setting in your `config.h`: + +```c +#define SEQUENCER_STEPS 32 +``` + +## Tracks + +You can program up to 8 independent tracks with the step sequencer. Select the tracks you want to edit, enable or disable some steps, and start the sequence! + +## Resolutions + +While the tempo defines the absolute speed at which the sequencer goes through the steps, the resolution defines the granularity of these steps (from coarser to finer). + +|Resolution |Description | +|---------- |----------- | +|`SQ_RES_2` |Every other beat | +|`SQ_RES_2T` |Every 1.5 beats | +|`SQ_RES_4` |Every beat | +|`SQ_RES_4T` |Three times per 2 beats| +|`SQ_RES_8` |Twice per beat | +|`SQ_RES_8T` |Three times per beat | +|`SQ_RES_16` |Four times per beat | +|`SQ_RES_16T` |Six times per beat | +|`SQ_RES_32` |Eight times per beat | + +## Keycodes + +|Keycode |Description | +|------- |----------- | +|`SQ_ON` |Start the step sequencer | +|`SQ_OFF` |Stop the step sequencer | +|`SQ_TOG` |Toggle the step sequencer playback | +|`SQ_SALL`|Enable all the steps | +|`SQ_SCLR`|Disable all the steps | +|`SQ_S(n)`|Toggle the step `n` | +|`SQ_TMPD`|Decrease the tempo | +|`SQ_TMPU`|Increase the tempo | +|`SQ_R(n)`|Set the resolution to n | +|`SQ_RESD`|Change to the slower resolution | +|`SQ_RESU`|Change to the faster resolution | +|`SQ_T(n)`|Set `n` as the only active track or deactivate all | + +## Functions + +|Function |Description | +|-------- |----------- | +|`bool is_sequencer_on(void);` |Return whether the sequencer is playing | +|`void sequencer_toggle(void);` |Toggle the step sequencer playback | +|`void sequencer_on(void);` |Start the step sequencer | +|`void sequencer_off(void);` |Stop the step sequencer | +|`bool is_sequencer_step_on(uint8_t step);` |Return whether the step is currently enabled | +|`void sequencer_set_step(uint8_t step, bool value);` |Enable or disable the step | +|`void sequencer_set_step_on();` |Enable the step | +|`void sequencer_set_step_off();` |Disable the step | +|`void sequencer_toggle_step(uint8_t step);` |Toggle the step | +|`void sequencer_set_all_steps(bool value);` |Enable or disable all the steps | +|`void sequencer_set_all_steps_on();` |Enable all the steps | +|`void sequencer_set_all_steps_off();` |Disable all the steps | +|`uint8_t sequencer_get_tempo(void);` |Return the current tempo | +|`void sequencer_set_tempo(uint8_t tempo);` |Set the tempo to `tempo` (between 1 and 255) | +|`void sequencer_increase_tempo(void);` |Increase the tempo | +|`void sequencer_decrease_tempo(void);` |Decrease the tempo | +|`sequencer_resolution_t sequencer_get_resolution(void);` |Return the current resolution | +|`void sequencer_set_resolution(sequencer_resolution_t resolution);` |Set the resolution to `resolution` | +|`void sequencer_increase_resolution(void);` |Change to the faster resolution | +|`void sequencer_decrease_resolution(void);` |Change to the slower resolution | +|`bool is_sequencer_track_active(uint8_t track);` |Return whether the track is active | +|`void sequencer_set_track_activation(uint8_t track, bool value);` |Activate or deactivate the `track` | +|`void sequencer_toggle_track_activation(uint8_t track);` |Toggle the `track` | +|`void sequencer_activate_track(uint8_t track);` |Activate the `track` | +|`void sequencer_deactivate_track(uint8_t track);` |Deactivate the `track` | +|`void sequencer_toggle_single_active_track(uint8_t track);` |Set `track` as the only active track or deactivate all | + -- cgit v1.2.3