From 7f6bb82b9daf51fb79972871e9f85696f783aa7a Mon Sep 17 00:00:00 2001 From: Brian Choromanski Date: Tue, 9 Oct 2018 13:20:09 -0400 Subject: Added link to One Shot Keys --- docs/feature_advanced_keycodes.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/feature_advanced_keycodes.md') diff --git a/docs/feature_advanced_keycodes.md b/docs/feature_advanced_keycodes.md index 0f5b8618a8..2ca533a282 100644 --- a/docs/feature_advanced_keycodes.md +++ b/docs/feature_advanced_keycodes.md @@ -27,7 +27,7 @@ These functions allow you to activate layers in various ways. Note that layers a * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers. * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. -* `OSL(layer)` - momentarily activates *layer* until the next key is pressed. +* `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys.](#one-shot-keys) * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa * `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed). * `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps. -- cgit v1.2.3