From c9ca36800884f63cf67d55565824bad0cb6d9be3 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 26 Jan 2017 01:52:43 -0500 Subject: replace jackhumbert with qmk --- doc/BUILD_GUIDE.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'doc/BUILD_GUIDE.md') diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md index 70a4e10fa5..1750191836 100644 --- a/doc/BUILD_GUIDE.md +++ b/doc/BUILD_GUIDE.md @@ -6,7 +6,7 @@ 1. If you have ever installed WinAVR, uninstall it. 2. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**. 3. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location. -4. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/jackhumbert/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. +4. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. 5. Double-click on the 1-setup-path-win batch script to run it. You'll need to accept a User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up. 6. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete! 7. Future build commands should be run from the standard Windows command prompt, which you can find by searching for "command prompt" from the start menu or start screen. Ignore the "MHV AVR Shell". @@ -38,7 +38,7 @@ Debian/Ubuntu example: If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md). ## Verify Your Installation -1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. +1. If you haven't already, obtain this repository ([https://github.com/qmk/qmk_firmware](https://github.com/qmk/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. 2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead. 3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `readme.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`. 4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below. -- cgit v1.2.3 From 154305ce1be16b2c8abce5e5d4dee421f295d6b3 Mon Sep 17 00:00:00 2001 From: Gabe Y Date: Tue, 4 Apr 2017 22:39:28 -0700 Subject: Fix formatting in BUILD_GUIDE.md (#1208) --- doc/BUILD_GUIDE.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc/BUILD_GUIDE.md') diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md index 1750191836..78cf00b917 100644 --- a/doc/BUILD_GUIDE.md +++ b/doc/BUILD_GUIDE.md @@ -96,7 +96,7 @@ The keyboard `config.h` is included only if the keymap one doesn't exist. The fo ``` #undef MY_SETTING #define MY_SETTING 4 -```c +``` For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it. -- cgit v1.2.3