From afb08462085132acf7a1962522952f7dbf064519 Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 8 Jun 2012 00:37:46 +0900 Subject: Made directories for keyboard and converter projects. --- converter/sony_usb/Makefile.pjrc | 58 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 converter/sony_usb/Makefile.pjrc (limited to 'converter/sony_usb/Makefile.pjrc') diff --git a/converter/sony_usb/Makefile.pjrc b/converter/sony_usb/Makefile.pjrc new file mode 100644 index 0000000000..376133ad5e --- /dev/null +++ b/converter/sony_usb/Makefile.pjrc @@ -0,0 +1,58 @@ +# +# Makefile for PJRC Teensy +# + + +# Target file name (without extension). +TARGET = news_usb_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = main.c \ + keymap.c \ + matrix.c \ + led.c \ + news.c + +CONFIG_H = config_pjrc.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# *Comment out* to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk -- cgit v1.2.3