From 5e2f882230b04138ced6d332bb35068fe9dc4589 Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 28 Feb 2014 18:07:46 -0800 Subject: Updated FAQ (markdown) --- FAQ.md | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'FAQ.md') diff --git a/FAQ.md b/FAQ.md index 9bfe5aab53..3fb7ab349a 100644 --- a/FAQ.md +++ b/FAQ.md @@ -1,17 +1,26 @@ # Degug Console -## 'hid_listen' can't find device +## hid_listen can't find device When debug console of your device is not ready you will see like this: Waiting for device:......... -once the device is pluged in then 'hid_listen' finds it you will get this message: +once the device is pluged in then *hid_listen* finds it you will get this message: Waiting for new device:......................... Listening: -Check these if you can't get this 'Listening:' message: -- build with `CONSOLE_ENABLE=yes` in Makefile +Check if you can't get this 'Listening:' message: +- build with `CONSOLE_ENABLE=yes` in **Makefile**. +## Can't get message from console +Check: +- the device is connected to *hid_listen*. See above. +- push **LShift+RShift+d** to enable debug. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands). +- `debug_enable=yes` Usually in `matrix_init()` in **matrix.c**. +- try using 'print' function instead of debug print. See **common/print.h**. +- Disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97). + +*** # NKRO -- cgit v1.2.3