From bebbe15562b45aeb911952b0765cd9c732d34306 Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 19 Jun 2013 22:07:16 +0900 Subject: Add power consumptions to doc --- keyboard/hhkb/doc/Bluetooth.txt | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/keyboard/hhkb/doc/Bluetooth.txt b/keyboard/hhkb/doc/Bluetooth.txt index b27f197006..24243aff86 100644 --- a/keyboard/hhkb/doc/Bluetooth.txt +++ b/keyboard/hhkb/doc/Bluetooth.txt @@ -2,3 +2,38 @@ HHKB Bluetooth mod ================== See this article: http://geekhack.org/showwiki.php?title=Island:20851 + + + +Power consume +============= +Switch board +------------ +5V +18mA full scan/no power control +16.5mA full scan with power control of POWER_ON/POWER_OFF in matrix.c +3.5-6mA 60ms watchdog timer sleep iwrap/main.c + +- the longer sleep time the less power is consumed. +- power control of swtich board must be needed. +FET switch may be better, though 18mA is with in port sink current limit. In current design switch board ground is connected to PB5 pin and power it on by making the pin low. + +Blueguiga WT12 +-------------- +3.3V +-42mA startup/searching/connecting +19-23mA connected +4mA -8mA not connected + +iWRAP sleep command may not work. to be looked into. + +Power Over all +-------------- +5V +-65mA startup +17-24mA idle/not connected +-42mA connecting +32-37mA idle/connecting(with sleep) +50-53mA typing/connecting(no sleep) + +2013/06/07 -- cgit v1.2.3