From 492a16308ae890a8d9c29383a1ffddcc1febfb47 Mon Sep 17 00:00:00 2001 From: wanleg <32079073+wanleg@users.noreply.github.com> Date: Thu, 28 Dec 2017 17:58:36 -0800 Subject: wanleg's gherkin layout my layout for the Gherkin --- keyboards/gherkin/keymaps/wanleg/config.h | 61 ++++++++ keyboards/gherkin/keymaps/wanleg/keymap.c | 221 +++++++++++++++++++++++++++++ keyboards/gherkin/keymaps/wanleg/readme.md | 12 ++ keyboards/gherkin/keymaps/wanleg/rules.mk | 63 ++++++++ 4 files changed, 357 insertions(+) create mode 100644 keyboards/gherkin/keymaps/wanleg/config.h create mode 100644 keyboards/gherkin/keymaps/wanleg/keymap.c create mode 100644 keyboards/gherkin/keymaps/wanleg/readme.md create mode 100644 keyboards/gherkin/keymaps/wanleg/rules.mk diff --git a/keyboards/gherkin/keymaps/wanleg/config.h b/keyboards/gherkin/keymaps/wanleg/config.h new file mode 100644 index 0000000000..6b69b21501 --- /dev/null +++ b/keyboards/gherkin/keymaps/wanleg/config.h @@ -0,0 +1,61 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER 40 Percent Club +#define PRODUCT Gherkin +#define DESCRIPTION A 30 key ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 6 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ +#define BACKLIGHT_PIN B5 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +/*tap dance definition */ +#define TAPPING_TERM 200 + + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/gherkin/keymaps/wanleg/keymap.c b/keyboards/gherkin/keymaps/wanleg/keymap.c new file mode 100644 index 0000000000..b16c15a907 --- /dev/null +++ b/keyboards/gherkin/keymaps/wanleg/keymap.c @@ -0,0 +1,221 @@ +/* Copyright 2017 Brian Fong + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "gherkin.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define DIR 1 +#define NUM 2 +#define ETC 3 + + +/////////////// TAP DANCE SECTION START /////////////// +//Tap Dance Declarations (list of my tap dance configurations) +enum { + TD_SFT_CAPS = 0 + ,TD_Q_ESC + ,ENT_TAP_DANCE + ,DEL_TAP_DANCE +}; + +///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START ///// +///// (no need to edit this section) ///// +//Enums used to clearly convey the state of the tap dance +enum { + SINGLE_TAP = 1, + SINGLE_HOLD = 2, + DOUBLE_TAP = 3, + DOUBLE_HOLD = 4, + DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP + // Add more enums here if you want for triple, quadruple, etc. +}; + +typedef struct { + bool is_press_action; + int state; +} tap; + +int cur_dance (qk_tap_dance_state_t *state) { + if (state->count == 1) { + //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP + if (state->interrupted || !state->pressed) return SINGLE_TAP; + if (state->interrupted) return SINGLE_TAP; + else return SINGLE_HOLD; + } + //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated + //with single tap. + else if (state->count == 2) { + if (state->interrupted) return DOUBLE_SINGLE_TAP; + else if (state->pressed) return DOUBLE_HOLD; + else return DOUBLE_TAP; + } + else return 6; //magic number. At some point this method will expand to work for more presses +} +///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END ///// +///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START ///// +//instantialize an instance of 'tap' for the 'ENT' tap dance. +static tap ENTtap_state = { + .is_press_action = true, + .state = 0 +}; + +void ENT_finished (qk_tap_dance_state_t *state, void *user_data) { + ENTtap_state.state = cur_dance(state); + switch (ENTtap_state.state) { + case SINGLE_TAP: register_code(KC_SPC); break; + case SINGLE_HOLD: register_code(KC_LSFT); break; + case DOUBLE_TAP: register_code(KC_ENT); break; + case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want) + case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC); + //Last case is for fast typing. Assuming your key is `f`: + //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`. + //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms. + } +} + +void ENT_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (ENTtap_state.state) { + case SINGLE_TAP: unregister_code(KC_SPC); break; + case SINGLE_HOLD: unregister_code(KC_LSFT); break; + case DOUBLE_TAP: unregister_code(KC_ENT); break; + case DOUBLE_HOLD: unregister_code(KC_NO); + case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC); + } + ENTtap_state.state = 0; +} + +//instanalize an instance of 'tap' for the 'DEL' tap dance. +static tap DELtap_state = { + .is_press_action = true, + .state = 0 +}; + +void DEL_finished (qk_tap_dance_state_t *state, void *user_data) { + DELtap_state.state = cur_dance(state); + switch (DELtap_state.state) { + case SINGLE_TAP: register_code(KC_BSPC); break; + case SINGLE_HOLD: register_code(KC_LCTL); break; + case DOUBLE_TAP: register_code(KC_DEL); break; + case DOUBLE_HOLD: register_code(KC_NO); break; + case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC); + } +} + +void DEL_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (DELtap_state.state) { + case SINGLE_TAP: unregister_code(KC_BSPC); break; + case SINGLE_HOLD: unregister_code(KC_LCTL); break; + case DOUBLE_TAP: unregister_code(KC_DEL); break; + case DOUBLE_HOLD: unregister_code(KC_NO); + case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC); + } + DELtap_state.state = 0; +} +///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END ///// + +//Tap Dance Definitions +//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS) +// Other declarations would go here, separated by commas, if you have them + ,[TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC) + ,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset) + ,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset) +}; + +//In Layer declaration, add tap dance item in place of a key code +//TD(TD_SFT_CAPS) + +///////////// TAP DANCE SECTION END /////////////// + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * .-----------------------------------------------------------------------------------------. + * | Q//ESC | W | E | R | T | Y | U | I | O | P | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | A | S | D | F | G | H | J | K | L | ENTER | + * | | | | | | | | | |SFThold | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | Z | X | C | V/NUM | B/ETC | N | M/DIR | ,/GUI | ./ALT | BKSC | + * | SFThold| | | | | | | | |CTRLhold| + * '-----------------------------------------------------------------------------------------' + */ + + [_QW] = KEYMAP( /* Qwerty*/ + TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SFT_T(KC_SPC), + SFT_T(KC_Z), KC_X, KC_C, LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC) + ), + + +// +///* +// * Directional Modifiers +// * .-----------------------------------------------------------------------------------------. +// * | TAB | up | | INS | CTRL | SHIFT | PgUp | HOME | - | = | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| +// * | left | down | right | PrScr | SHIFT | CTRL | PgDn | END | [ | ] | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| +// * | | | | | | | | | ALT | / | +// * '-----------------------------------------------------------------------------------------' +// */ +// +[DIR] = KEYMAP( /* Directional Modifiers */ + KC_TAB, KC_UP, KC_TRNS, KC_INS, KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL , + KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END, KC_LBRC, KC_RBRC , + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_SLSH +), +// +// /* +// * Numbers +// * .-----------------------------------------------------------------------------------------. +// * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| +// * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| +// * | F11 | F12 | | | | ENTER | SHIFT | GUI | ./ALT | BKSC | +// * | | | | | | | | | |CTRLhold| +// * '-----------------------------------------------------------------------------------------' +// */ +// +[NUM] = KEYMAP ( /* Numbers */ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 , + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0 , + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC) +), +// +// +// /* +// * ETC +// * .-----------------------------------------------------------------------------------------. +// * | ` | | | | | | | | | \ | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| +// * | CAPS | P-Brk | | | | | | | ; | ' | +// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| +// * | SHIFT | | | | | C-A-D | | GUI | | DEL | +// * '-----------------------------------------------------------------------------------------' +// */ +// +[ETC] = KEYMAP( /* ETC */ + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS , + KC_CAPS, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT , + KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LALT(LCTL(KC_DEL)), KC_TRNS, KC_RGUI, KC_TRNS, KC_DEL + ), +}; diff --git a/keyboards/gherkin/keymaps/wanleg/readme.md b/keyboards/gherkin/keymaps/wanleg/readme.md new file mode 100644 index 0000000000..a364fcabca --- /dev/null +++ b/keyboards/gherkin/keymaps/wanleg/readme.md @@ -0,0 +1,12 @@ +![Gherkin Wanleg Layout Image](https://i.imgur.com/RpN5N42.png) + +# Gherkin Wanleg Layout + +Here is the layout I came up with to preserve a standard QWERTY layout as much as possible, in as few layers as possible for a 30 key board. +I originally set up a few Tap Dance keys, but eventually dropped most of them in favor of chorded versions, since in actual use, they tended to impede typing speed more than their (current) two-key versions. +I've left them in my layout ready for use if anyone wants to try them out: +Single tap - Double tap - Hold +space - enter - shift +backspace - delete - control +shift - caps lock - XXXX +KC_Q - escape - XXXX \ No newline at end of file diff --git a/keyboards/gherkin/keymaps/wanleg/rules.mk b/keyboards/gherkin/keymaps/wanleg/rules.mk new file mode 100644 index 0000000000..06e66c16ed --- /dev/null +++ b/keyboards/gherkin/keymaps/wanleg/rules.mk @@ -0,0 +1,63 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no +TAP_DANCE_ENABLE = yes # Enable Tap Dance (comment if not being implemented) \ No newline at end of file -- cgit v1.2.3