From 265c415f5e13b32fd14f06d8af4ae2498ba9059b Mon Sep 17 00:00:00 2001 From: yulei Date: Wed, 27 Nov 2019 23:54:02 +0800 Subject: adding noah keyboard (#7432) * adding noah keyboard * Update keyboards/matrix/noah/config.h Co-Authored-By: Drashna Jaelre * Update keyboards/matrix/noah/noah.c Co-Authored-By: Drashna Jaelre --- keyboards/matrix/noah/boards/noah_bd/board.c | 131 ++ keyboards/matrix/noah/boards/noah_bd/board.h | 1336 +++++++++++++++++++++ keyboards/matrix/noah/boards/noah_bd/board.mk | 5 + keyboards/matrix/noah/bootloader_defs.h | 7 + keyboards/matrix/noah/chconf.h | 527 ++++++++ keyboards/matrix/noah/config.h | 54 + keyboards/matrix/noah/eeprom_f4.c | 822 +++++++++++++ keyboards/matrix/noah/eeprom_f4.h | 130 ++ keyboards/matrix/noah/halconf.h | 388 ++++++ keyboards/matrix/noah/info.json | 721 +++++++++++ keyboards/matrix/noah/keymaps/default/keymap.c | 20 + keyboards/matrix/noah/keymaps/splitspace/keymap.c | 20 + keyboards/matrix/noah/ld/noah_boot.ld | 85 ++ keyboards/matrix/noah/matrix.c | 166 +++ keyboards/matrix/noah/mcuconf.h | 268 +++++ keyboards/matrix/noah/noah.c | 243 ++++ keyboards/matrix/noah/noah.h | 91 ++ keyboards/matrix/noah/readme.md | 19 + keyboards/matrix/noah/rules.mk | 57 + keyboards/matrix/noah/ws2812_f4.c | 272 +++++ keyboards/matrix/noah/ws2812_f4.h | 102 ++ 21 files changed, 5464 insertions(+) create mode 100644 keyboards/matrix/noah/boards/noah_bd/board.c create mode 100644 keyboards/matrix/noah/boards/noah_bd/board.h create mode 100644 keyboards/matrix/noah/boards/noah_bd/board.mk create mode 100644 keyboards/matrix/noah/bootloader_defs.h create mode 100644 keyboards/matrix/noah/chconf.h create mode 100644 keyboards/matrix/noah/config.h create mode 100644 keyboards/matrix/noah/eeprom_f4.c create mode 100644 keyboards/matrix/noah/eeprom_f4.h create mode 100644 keyboards/matrix/noah/halconf.h create mode 100644 keyboards/matrix/noah/info.json create mode 100644 keyboards/matrix/noah/keymaps/default/keymap.c create mode 100644 keyboards/matrix/noah/keymaps/splitspace/keymap.c create mode 100644 keyboards/matrix/noah/ld/noah_boot.ld create mode 100644 keyboards/matrix/noah/matrix.c create mode 100644 keyboards/matrix/noah/mcuconf.h create mode 100644 keyboards/matrix/noah/noah.c create mode 100644 keyboards/matrix/noah/noah.h create mode 100644 keyboards/matrix/noah/readme.md create mode 100644 keyboards/matrix/noah/rules.mk create mode 100644 keyboards/matrix/noah/ws2812_f4.c create mode 100644 keyboards/matrix/noah/ws2812_f4.h diff --git a/keyboards/matrix/noah/boards/noah_bd/board.c b/keyboards/matrix/noah/boards/noah_bd/board.c new file mode 100644 index 0000000000..7fd6a60b5f --- /dev/null +++ b/keyboards/matrix/noah/boards/noah_bd/board.c @@ -0,0 +1,131 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} +#endif +}; +#endif + +void enter_bootloader_mode_if_requested(void); + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + enter_bootloader_mode_if_requested(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/keyboards/matrix/noah/boards/noah_bd/board.h b/keyboards/matrix/noah/boards/noah_bd/board.h new file mode 100644 index 0000000000..37d1d13623 --- /dev/null +++ b/keyboards/matrix/noah/boards/noah_bd/board.h @@ -0,0 +1,1336 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/* + * Setup for Matrix M65 board. + */ + +/* + * Board identifier. + */ +#define BOARD_MATRIX_NOAH +#define BOARD_NAME "Matrix noah65 keyboard" +#define BOARD_OTG_NOVBUSSENS + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 8000000U +#endif + +//#define STM32_HSE_BYPASS + +/* + * Board voltages. + * Required for performance limits calculation. + */ +#define STM32_VDD 300U + +/* + * MCU type as defined in the ST header. + */ +#define STM32F411xE + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_SCK 5U +#define GPIOA_MISO 6U +#define GPIOA_MOSI 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_OTG_FS_DM 11U +#define GPIOA_OTG_FS_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_SWO 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_PIN0 0U +#define GPIOF_PIN1 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_OSC_IN 0U +#define GPIOH_OSC_OUT 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +#define GPIOI_PIN0 0U +#define GPIOI_PIN1 1U +#define GPIOI_PIN2 2U +#define GPIOI_PIN3 3U +#define GPIOI_PIN4 4U +#define GPIOI_PIN5 5U +#define GPIOI_PIN6 6U +#define GPIOI_PIN7 7U +#define GPIOI_PIN8 8U +#define GPIOI_PIN9 9U +#define GPIOI_PIN10 10U +#define GPIOI_PIN11 11U +#define GPIOI_PIN12 12U +#define GPIOI_PIN13 13U +#define GPIOI_PIN14 14U +#define GPIOI_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_ROW_1 PAL_LINE(GPIOB, 0U) +#define LINE_ROW_2 PAL_LINE(GPIOA, 1U) +#define LINE_ROW_3 PAL_LINE(GPIOC, 14U) +#define LINE_ROW_4 PAL_LINE(GPIOC, 13U) +#define LINE_ROW_5 PAL_LINE(GPIOA, 0U) + +#define LINE_COL_1 PAL_LINE(GPIOC, 15U) +#define LINE_COL_2 PAL_LINE(GPIOB, 10U) +#define LINE_COL_3 PAL_LINE(GPIOB, 7U) +#define LINE_COL_4 PAL_LINE(GPIOB, 6U) +#define LINE_COL_5 PAL_LINE(GPIOB, 5U) +#define LINE_COL_6 PAL_LINE(GPIOB, 4U) +#define LINE_COL_7 PAL_LINE(GPIOA, 15U) +#define LINE_COL_8 PAL_LINE(GPIOA, 10U) +#define LINE_COL_9 PAL_LINE(GPIOA, 9U) +#define LINE_COL_10 PAL_LINE(GPIOA, 8U) +#define LINE_COL_11 PAL_LINE(GPIOB, 15U) +#define LINE_COL_12 PAL_LINE(GPIOB, 14U) +#define LINE_COL_13 PAL_LINE(GPIOB, 13U) +#define LINE_COL_14 PAL_LINE(GPIOB, 12U) +#define LINE_COL_15 PAL_LINE(GPIOB, 2U) + +// u2u lines +#define LINE_U2U_RST PAL_LINE(GPIOA, 2U) +#define LINE_U2U_IRQ PAL_LINE(GPIOA, 3U) +#define LINE_U2U_CS PAL_LINE(GPIOA, 4U) +#define LINE_U2U_SCK PAL_LINE(GPIOA, 5U) +#define LINE_U2U_MISO PAL_LINE(GPIOA, 6U) +#define LINE_U2U_MOSI PAL_LINE(GPIOA, 7U) + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - (input pullup). + * PA1 - (input pullup). + * PA2 - (input pullup). + * PA3 - (input pullup). + * PA4 - (input pullup). + * PA5 - SPI SCK (alternate 5). + * PA6 - SPI MISO (alternate 5). + * PA7 - SPI MOSI (alternate 5). + * PA8 - (input pullup). + * PA9 - (input pullup). + * PA10 - (input pullup). + * PA11 - OTG_FS_DM (alternate 10). + * PA12 - OTG_FS_DP (alternate 10). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - (input pullup). + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ + PIN_MODE_INPUT(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_ALTERNATE(GPIOA_SCK) | \ + PIN_MODE_ALTERNATE(GPIOA_MISO) | \ + PIN_MODE_ALTERNATE(GPIOA_MOSI) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SCK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_MISO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_MOSI) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_HIGH(GPIOA_SCK) | \ + PIN_OSPEED_HIGH(GPIOA_MISO) | \ + PIN_OSPEED_HIGH(GPIOA_MOSI) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_SCK) | \ + PIN_PUPDR_PULLUP(GPIOA_MISO) | \ + PIN_PUPDR_PULLUP(GPIOA_MOSI) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_SCK) | \ + PIN_ODR_HIGH(GPIOA_MISO) | \ + PIN_ODR_HIGH(GPIOA_MOSI) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOA_SCK, 5U) | \ + PIN_AFIO_AF(GPIOA_MISO, 5U) | \ + PIN_AFIO_AF(GPIOA_MOSI, 5U)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0U)) + +/* + * GPIOB setup: + * + * PB0 - (input pullup). + * PB1 - (input pullup). + * PB2 - (input pullup). + * PB3 - SWO (alternate 0). + * PB4 - (input pullup). + * PB5 - (input pullup). + * PB6 - (input pullup). + * PB7 - (input pullup). + * PB8 - (input pullup). + * PB9 - (input pullup). + * PB10 - (input pullup). + * PB11 - (input pullup). + * PB12 - (input pullup). + * PB13 - (input pullup). + * PB14 - (input pullup). + * PB15 - (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_SWO) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_INPUT(GPIOB_PIN6) | \ + PIN_MODE_INPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_SWO) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_SWO) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_SWO) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_PIN6) | \ + PIN_ODR_HIGH(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_SWO, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0U)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + +/* + * GPIOC setup: + * + * PC0 - (input pullup). + * PC1 - (input pullup). + * PC2 - (input pullup). + * PC3 - (input pullup). + * PC4 - (input pullup). + * PC5 - (input pullup). + * PC6 - (input pullup). + * PC7 - (input pullup). + * PC8 - (input pullup). + * PC9 - (input pullup). + * PC10 - (input pullup). + * PC11 - (input pullup). + * PC12 - (input pullup). + * PC13 - (input floating). + * PC14 - (input floating). + * PC15 - (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_INPUT(GPIOC_PIN7) | \ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_PIN14) | \ + PIN_MODE_INPUT(GPIOC_PIN15)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN15)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN15)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_PIN7) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_PIN14) | \ + PIN_ODR_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN7, 0U)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN15, 0U)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD10 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ + PIN_OSPEED_HIGH(GPIOD_PIN1) | \ + PIN_OSPEED_HIGH(GPIOD_PIN2) | \ + PIN_OSPEED_HIGH(GPIOD_PIN3) | \ + PIN_OSPEED_HIGH(GPIOD_PIN4) | \ + PIN_OSPEED_HIGH(GPIOD_PIN5) | \ + PIN_OSPEED_HIGH(GPIOD_PIN6) | \ + PIN_OSPEED_HIGH(GPIOD_PIN7) | \ + PIN_OSPEED_HIGH(GPIOD_PIN8) | \ + PIN_OSPEED_HIGH(GPIOD_PIN9) | \ + PIN_OSPEED_HIGH(GPIOD_PIN10) | \ + PIN_OSPEED_HIGH(GPIOD_PIN11) | \ + PIN_OSPEED_HIGH(GPIOD_PIN12) | \ + PIN_OSPEED_HIGH(GPIOD_PIN13) | \ + PIN_OSPEED_HIGH(GPIOD_PIN14) | \ + PIN_OSPEED_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0U)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0U)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 (input pullup). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (input pullup). + * PE9 - PIN9 (input pullup). + * PE10 - PIN10 (input pullup). + * PE11 - PIN11 (input pullup). + * PE12 - PIN12 (input pullup). + * PE13 - PIN13 (input pullup). + * PE14 - PIN14 (input pullup). + * PE15 - PIN15 (input pullup). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) | \ + PIN_MODE_INPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) | \ + PIN_MODE_INPUT(GPIOE_PIN5) | \ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_INPUT(GPIOE_PIN8) | \ + PIN_MODE_INPUT(GPIOE_PIN9) | \ + PIN_MODE_INPUT(GPIOE_PIN10) | \ + PIN_MODE_INPUT(GPIOE_PIN11) | \ + PIN_MODE_INPUT(GPIOE_PIN12) | \ + PIN_MODE_INPUT(GPIOE_PIN13) | \ + PIN_MODE_INPUT(GPIOE_PIN14) | \ + PIN_MODE_INPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \ + PIN_OSPEED_HIGH(GPIOE_PIN1) | \ + PIN_OSPEED_HIGH(GPIOE_PIN2) | \ + PIN_OSPEED_HIGH(GPIOE_PIN3) | \ + PIN_OSPEED_HIGH(GPIOE_PIN4) | \ + PIN_OSPEED_HIGH(GPIOE_PIN5) | \ + PIN_OSPEED_HIGH(GPIOE_PIN6) | \ + PIN_OSPEED_HIGH(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_HIGH(GPIOE_PIN8) | \ + PIN_ODR_HIGH(GPIOE_PIN9) | \ + PIN_ODR_HIGH(GPIOE_PIN10) | \ + PIN_ODR_HIGH(GPIOE_PIN11) | \ + PIN_ODR_HIGH(GPIOE_PIN12) | \ + PIN_ODR_HIGH(GPIOE_PIN13) | \ + PIN_ODR_HIGH(GPIOE_PIN14) | \ + PIN_ODR_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0U)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0U)) + +/* + * GPIOF setup: + * + * PF0 - PIN0 (input pullup). + * PF1 - PIN1 (input pullup). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \ + PIN_MODE_INPUT(GPIOF_PIN1) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | \ + PIN_OSPEED_HIGH(GPIOF_PIN1) | \ + PIN_OSPEED_HIGH(GPIOF_PIN2) | \ + PIN_OSPEED_HIGH(GPIOF_PIN3) | \ + PIN_OSPEED_HIGH(GPIOF_PIN4) | \ + PIN_OSPEED_HIGH(GPIOF_PIN5) | \ + PIN_OSPEED_HIGH(GPIOF_PIN6) | \ + PIN_OSPEED_HIGH(GPIOF_PIN7) | \ + PIN_OSPEED_HIGH(GPIOF_PIN8) | \ + PIN_OSPEED_HIGH(GPIOF_PIN9) | \ + PIN_OSPEED_HIGH(GPIOF_PIN10) | \ + PIN_OSPEED_HIGH(GPIOF_PIN11) | \ + PIN_OSPEED_HIGH(GPIOF_PIN12) | \ + PIN_OSPEED_HIGH(GPIOF_PIN13) | \ + PIN_OSPEED_HIGH(GPIOF_PIN14) | \ + PIN_OSPEED_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \ + PIN_ODR_HIGH(GPIOF_PIN1) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0U)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0U)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | \ + PIN_OSPEED_HIGH(GPIOG_PIN1) | \ + PIN_OSPEED_HIGH(GPIOG_PIN2) | \ + PIN_OSPEED_HIGH(GPIOG_PIN3) | \ + PIN_OSPEED_HIGH(GPIOG_PIN4) | \ + PIN_OSPEED_HIGH(GPIOG_PIN5) | \ + PIN_OSPEED_HIGH(GPIOG_PIN6) | \ + PIN_OSPEED_HIGH(GPIOG_PIN7) | \ + PIN_OSPEED_HIGH(GPIOG_PIN8) | \ + PIN_OSPEED_HIGH(GPIOG_PIN9) | \ + PIN_OSPEED_HIGH(GPIOG_PIN10) | \ + PIN_OSPEED_HIGH(GPIOG_PIN11) | \ + PIN_OSPEED_HIGH(GPIOG_PIN12) | \ + PIN_OSPEED_HIGH(GPIOG_PIN13) | \ + PIN_OSPEED_HIGH(GPIOG_PIN14) | \ + PIN_OSPEED_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0U)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0U)) + +/* + * GPIOH setup: + * + * PH0 - OSC_IN (input floating). + * PH1 - OSC_OUT (input floating). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \ + PIN_MODE_INPUT(GPIOH_OSC_OUT) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | \ + PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | \ + PIN_OSPEED_HIGH(GPIOH_PIN2) | \ + PIN_OSPEED_HIGH(GPIOH_PIN3) | \ + PIN_OSPEED_HIGH(GPIOH_PIN4) | \ + PIN_OSPEED_HIGH(GPIOH_PIN5) | \ + PIN_OSPEED_HIGH(GPIOH_PIN6) | \ + PIN_OSPEED_HIGH(GPIOH_PIN7) | \ + PIN_OSPEED_HIGH(GPIOH_PIN8) | \ + PIN_OSPEED_HIGH(GPIOH_PIN9) | \ + PIN_OSPEED_HIGH(GPIOH_PIN10) | \ + PIN_OSPEED_HIGH(GPIOH_PIN11) | \ + PIN_OSPEED_HIGH(GPIOH_PIN12) | \ + PIN_OSPEED_HIGH(GPIOH_PIN13) | \ + PIN_OSPEED_HIGH(GPIOH_PIN14) | \ + PIN_OSPEED_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \ + PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \ + PIN_ODR_HIGH(GPIOH_OSC_OUT) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | \ + PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0U)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0U)) + +/* + * GPIOI setup: + * + * PI0 - PIN0 (input pullup). + * PI1 - PIN1 (input pullup). + * PI2 - PIN2 (input pullup). + * PI3 - PIN3 (input pullup). + * PI4 - PIN4 (input pullup). + * PI5 - PIN5 (input pullup). + * PI6 - PIN6 (input pullup). + * PI7 - PIN7 (input pullup). + * PI8 - PIN8 (input pullup). + * PI9 - PIN9 (input pullup). + * PI10 - PIN10 (input pullup). + * PI11 - PIN11 (input pullup). + * PI12 - PIN12 (input pullup). + * PI13 - PIN13 (input pullup). + * PI14 - PIN14 (input pullup). + * PI15 - PIN15 (input pullup). + */ +#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \ + PIN_MODE_INPUT(GPIOI_PIN1) | \ + PIN_MODE_INPUT(GPIOI_PIN2) | \ + PIN_MODE_INPUT(GPIOI_PIN3) | \ + PIN_MODE_INPUT(GPIOI_PIN4) | \ + PIN_MODE_INPUT(GPIOI_PIN5) | \ + PIN_MODE_INPUT(GPIOI_PIN6) | \ + PIN_MODE_INPUT(GPIOI_PIN7) | \ + PIN_MODE_INPUT(GPIOI_PIN8) | \ + PIN_MODE_INPUT(GPIOI_PIN9) | \ + PIN_MODE_INPUT(GPIOI_PIN10) | \ + PIN_MODE_INPUT(GPIOI_PIN11) | \ + PIN_MODE_INPUT(GPIOI_PIN12) | \ + PIN_MODE_INPUT(GPIOI_PIN13) | \ + PIN_MODE_INPUT(GPIOI_PIN14) | \ + PIN_MODE_INPUT(GPIOI_PIN15)) +#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) +#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | \ + PIN_OSPEED_HIGH(GPIOI_PIN1) | \ + PIN_OSPEED_HIGH(GPIOI_PIN2) | \ + PIN_OSPEED_HIGH(GPIOI_PIN3) | \ + PIN_OSPEED_HIGH(GPIOI_PIN4) | \ + PIN_OSPEED_HIGH(GPIOI_PIN5) | \ + PIN_OSPEED_HIGH(GPIOI_PIN6) | \ + PIN_OSPEED_HIGH(GPIOI_PIN7) | \ + PIN_OSPEED_HIGH(GPIOI_PIN8) | \ + PIN_OSPEED_HIGH(GPIOI_PIN9) | \ + PIN_OSPEED_HIGH(GPIOI_PIN10) | \ + PIN_OSPEED_HIGH(GPIOI_PIN11) | \ + PIN_OSPEED_HIGH(GPIOI_PIN12) | \ + PIN_OSPEED_HIGH(GPIOI_PIN13) | \ + PIN_OSPEED_HIGH(GPIOI_PIN14) | \ + PIN_OSPEED_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN15)) +#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \ + PIN_ODR_HIGH(GPIOI_PIN1) | \ + PIN_ODR_HIGH(GPIOI_PIN2) | \ + PIN_ODR_HIGH(GPIOI_PIN3) | \ + PIN_ODR_HIGH(GPIOI_PIN4) | \ + PIN_ODR_HIGH(GPIOI_PIN5) | \ + PIN_ODR_HIGH(GPIOI_PIN6) | \ + PIN_ODR_HIGH(GPIOI_PIN7) | \ + PIN_ODR_HIGH(GPIOI_PIN8) | \ + PIN_ODR_HIGH(GPIOI_PIN9) | \ + PIN_ODR_HIGH(GPIOI_PIN10) | \ + PIN_ODR_HIGH(GPIOI_PIN11) | \ + PIN_ODR_HIGH(GPIOI_PIN12) | \ + PIN_ODR_HIGH(GPIOI_PIN13) | \ + PIN_ODR_HIGH(GPIOI_PIN14) | \ + PIN_ODR_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN7, 0U)) +#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN15, 0U)) + + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* BOARD_H */ diff --git a/keyboards/matrix/noah/boards/noah_bd/board.mk b/keyboards/matrix/noah/boards/noah_bd/board.mk new file mode 100644 index 0000000000..e4cd10acfc --- /dev/null +++ b/keyboards/matrix/noah/boards/noah_bd/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/noah_bd diff --git a/keyboards/matrix/noah/bootloader_defs.h b/keyboards/matrix/noah/bootloader_defs.h new file mode 100644 index 0000000000..20b8f73e6f --- /dev/null +++ b/keyboards/matrix/noah/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * /tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/keyboards/matrix/noah/chconf.h b/keyboards/matrix/noah/chconf.h new file mode 100644 index 0000000000..228a0827d8 --- /dev/null +++ b/keyboards/matrix/noah/chconf.h @@ -0,0 +1,527 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +#define ARM_WFI_IMPL __WFI + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/matrix/noah/config.h b/keyboards/matrix/noah/config.h new file mode 100644 index 0000000000..a5a77067a6 --- /dev/null +++ b/keyboards/matrix/noah/config.h @@ -0,0 +1,54 @@ +/** + * config.h + * + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D58 // MX +#define PRODUCT_ID 0x0065 // noah 65 +#define DEVICE_VER 0x0001 +#define MANUFACTURER matrix +#define PRODUCT NOAH +#define DESCRIPTION 65% keybaord of the Matrix abel family + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCING_DELAY 5 + +// i2c setting +#define USE_I2CV1 +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_CLOCK_SPEED 400000 +#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 +#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN) + +// rgb matrix setting +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110110 +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 36 +#define DRIVER_2_LED_TOTAL 36 +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) + +/* indicator rgb */ +#define WS2812_LED_N 7 +#define RGBLED_NUM WS2812_LED_N +#define WS2812_TIM_N 3 +#define WS2812_TIM_CH 3 +#define PORT_WS2812 GPIOB +#define PIN_WS2812 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) +#define WS2812_DMA_CHANNEL 5 // DMA channel for TIMx_UP +#define RGBLIGHT_ANIMATIONS +//#define WS2812_EXTERNAL_PULLUP + +// tapping setting +#define TAPPING_TERM 200 +#define RETRO_TAPPING +#define PERMISSIVE_HOLD diff --git a/keyboards/matrix/noah/eeprom_f4.c b/keyboards/matrix/noah/eeprom_f4.c new file mode 100644 index 0000000000..3333d7d939 --- /dev/null +++ b/keyboards/matrix/noah/eeprom_f4.c @@ -0,0 +1,822 @@ +/** + ****************************************************************************** + * @file EEPROM/EEPROM_Emulation/src/eeprom.c + * @author MCD Application Team + * @brief This file provides all the EEPROM emulation firmware functions. + ****************************************************************************** + * @attention + * + *

© Copyright � 2017 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/** @addtogroup EEPROM_Emulation + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "eeprom_f4.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Global variable used to store variable value in read sequence */ +uint16_t DataVar = 0; + +/* Virtual address defined by the user: 0xFFFF value is prohibited */ +extern uint16_t VirtAddVarTab[NB_OF_VAR]; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +static HAL_StatusTypeDef EE_Format(void); +static uint16_t EE_FindValidPage(uint8_t Operation); +static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data); +static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data); +static uint16_t EE_VerifyPageFullyErased(uint32_t Address); + +/** + * @brief Restore the pages to a known good state in case of page's status + * corruption after a power loss. + * @param None. + * @retval - Flash error code: on write Flash error + * - FLASH_COMPLETE: on success + */ +uint16_t EE_Init(void) +{ + uint16_t PageStatus0 = 6, PageStatus1 = 6; + uint16_t VarIdx = 0; + uint16_t EepromStatus = 0, ReadStatus = 0; + int16_t x = -1; + HAL_StatusTypeDef FlashStatus; + + FLASH_UnlockF4(); + + /* Get Page0 status */ + PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS); + /* Get Page1 status */ + PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS); + + /* Check for invalid header states and repair if necessary */ + switch (PageStatus0) + { + case ERASED: + if (PageStatus1 == VALID_PAGE) /* Page0 erased, Page1 valid */ + { + /* Erase Page0 */ + if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE0_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + } + else if (PageStatus1 == RECEIVE_DATA) /* Page0 erased, Page1 receive */ + { + /* Erase Page0 */ + if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + /* Mark Page1 as valid */ + FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + else /* First EEPROM access (Page0&1 are erased) or invalid state -> format EEPROM */ + { + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + break; + + case RECEIVE_DATA: + if (PageStatus1 == VALID_PAGE) /* Page0 receive, Page1 valid */ + { + /* Transfer data from Page1 to Page0 */ + for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) + { + if (( *(__IO uint16_t*)(PAGE0_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx]) + { + x = VarIdx; + } + if (VarIdx != x) + { + /* Read the last variables' updates */ + ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); + /* In case variable corresponding to the virtual address was found */ + if (ReadStatus != 0x1) + { + /* Transfer the variable to the Page0 */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) + { + return EepromStatus; + } + } + } + } + /* Mark Page0 as valid */ + FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + /* Erase Page1 */ + if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + } + else if (PageStatus1 == ERASED) /* Page0 receive, Page1 erased */ + { + /* Erase Page1 */ + if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + /* Mark Page0 as valid */ + FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + else /* Invalid state -> format eeprom */ + { + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + break; + + case VALID_PAGE: + if (PageStatus1 == VALID_PAGE) /* Invalid state -> format eeprom */ + { + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + else if (PageStatus1 == ERASED) /* Page0 valid, Page1 erased */ + { + /* Erase Page1 */ + if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + } + else /* Page0 valid, Page1 receive */ + { + /* Transfer data from Page0 to Page1 */ + for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) + { + if ((*(__IO uint16_t*)(PAGE1_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx]) + { + x = VarIdx; + } + if (VarIdx != x) + { + /* Read the last variables' updates */ + ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); + /* In case variable corresponding to the virtual address was found */ + if (ReadStatus != 0x1) + { + /* Transfer the variable to the Page1 */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) + { + return EepromStatus; + } + } + } + } + /* Mark Page1 as valid */ + FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + /* Erase Page0 */ + if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE0_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + } + break; + + default: /* Any other state -> format eeprom */ + /* Erase both Page0 and Page1 and set Page0 as valid page */ + FlashStatus = EE_Format(); + /* If erase/program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + break; + } + + return HAL_OK; +} + +/** + * @brief Verify if specified page is fully erased. + * @param Address: page address + * This parameter can be one of the following values: + * @arg PAGE0_BASE_ADDRESS: Page0 base address + * @arg PAGE1_BASE_ADDRESS: Page1 base address + * @retval page fully erased status: + * - 0: if Page not erased + * - 1: if Page erased + */ +uint16_t EE_VerifyPageFullyErased(uint32_t Address) +{ + uint32_t ReadStatus = 1; + uint16_t AddressValue = 0x5555; + + /* Check each active page address starting from end */ + while (Address <= PAGE0_END_ADDRESS) + { + /* Get the current location content to be compared with virtual address */ + AddressValue = (*(__IO uint16_t*)Address); + + /* Compare the read address with the virtual address */ + if (AddressValue != ERASED) + { + + /* In case variable value is read, reset ReadStatus flag */ + ReadStatus = 0; + + break; + } + /* Next address location */ + Address = Address + 4; + } + + /* Return ReadStatus value: (0: Page not erased, 1: Sector erased) */ + return ReadStatus; +} + +/** + * @brief Returns the last stored variable data, if found, which correspond to + * the passed virtual address + * @param VirtAddress: Variable virtual address + * @param Data: Global variable contains the read variable value + * @retval Success or error status: + * - 0: if variable was found + * - 1: if the variable was not found + * - NO_VALID_PAGE: if no valid page was found. + */ +uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data) +{ + uint16_t ValidPage = PAGE0; + uint16_t AddressValue = 0x5555, ReadStatus = 1; + uint32_t Address = EEPROM_START_ADDRESS, PageStartAddress = EEPROM_START_ADDRESS; + + /* Get active Page for read operation */ + ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE); + + /* Check if there is no valid page */ + if (ValidPage == NO_VALID_PAGE) + { + return NO_VALID_PAGE; + } + + /* Get the valid Page start Address */ + PageStartAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE)); + + /* Get the valid Page end Address */ + Address = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE)); + + /* Check each active page address starting from end */ + while (Address > (PageStartAddress + 2)) + { + /* Get the current location content to be compared with virtual address */ + AddressValue = (*(__IO uint16_t*)Address); + + /* Compare the read address with the virtual address */ + if (AddressValue == VirtAddress) + { + /* Get content of Address-2 which is variable value */ + *Data = (*(__IO uint16_t*)(Address - 2)); + + /* In case variable value is read, reset ReadStatus flag */ + ReadStatus = 0; + + break; + } + else + { + /* Next address location */ + Address = Address - 4; + } + } + + /* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */ + return ReadStatus; +} + +/** + * @brief Writes/upadtes variable data in EEPROM. + * @param VirtAddress: Variable virtual address + * @param Data: 16 bit data to be written + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - PAGE_FULL: if valid page is full + * - NO_VALID_PAGE: if no valid page was found + * - Flash error code: on write Flash error + */ +uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data) +{ + uint16_t Status = 0; + + /* Write the variable virtual address and value in the EEPROM */ + Status = EE_VerifyPageFullWriteVariable(VirtAddress, Data); + + /* In case the EEPROM active page is full */ + if (Status == PAGE_FULL) + { + /* Perform Page transfer */ + Status = EE_PageTransfer(VirtAddress, Data); + } + + /* Return last operation status */ + return Status; +} + +/** + * @brief Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE + * @param None + * @retval Status of the last operation (Flash write or erase) done during + * EEPROM formating + */ +static HAL_StatusTypeDef EE_Format(void) +{ + HAL_StatusTypeDef FlashStatus = HAL_OK; + + /* Erase Page0 */ + if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE0_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + /* Set Page0 as valid page: Write VALID_PAGE at Page0 base address */ + FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + + /* Erase Page1 */ + if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) + { + FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + } + + return HAL_OK; +} + +/** + * @brief Find valid Page for write or read operation + * @param Operation: operation to achieve on the valid page. + * This parameter can be one of the following values: + * @arg READ_FROM_VALID_PAGE: read operation from valid page + * @arg WRITE_IN_VALID_PAGE: write operation from valid page + * @retval Valid page number (PAGE or PAGE1) or NO_VALID_PAGE in case + * of no valid page was found + */ +static uint16_t EE_FindValidPage(uint8_t Operation) +{ + uint16_t PageStatus0 = 6, PageStatus1 = 6; + + /* Get Page0 actual status */ + PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS); + + /* Get Page1 actual status */ + PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS); + + /* Write or read operation */ + switch (Operation) + { + case WRITE_IN_VALID_PAGE: /* ---- Write operation ---- */ + if (PageStatus1 == VALID_PAGE) + { + /* Page0 receiving data */ + if (PageStatus0 == RECEIVE_DATA) + { + return PAGE0; /* Page0 valid */ + } + else + { + return PAGE1; /* Page1 valid */ + } + } + else if (PageStatus0 == VALID_PAGE) + { + /* Page1 receiving data */ + if (PageStatus1 == RECEIVE_DATA) + { + return PAGE1; /* Page1 valid */ + } + else + { + return PAGE0; /* Page0 valid */ + } + } + else + { + return NO_VALID_PAGE; /* No valid Page */ + } + + case READ_FROM_VALID_PAGE: /* ---- Read operation ---- */ + if (PageStatus0 == VALID_PAGE) + { + return PAGE0; /* Page0 valid */ + } + else if (PageStatus1 == VALID_PAGE) + { + return PAGE1; /* Page1 valid */ + } + else + { + return NO_VALID_PAGE ; /* No valid Page */ + } + + default: + return PAGE0; /* Page0 valid */ + } +} + +/** + * @brief Verify if active page is full and Writes variable in EEPROM. + * @param VirtAddress: 16 bit virtual address of the variable + * @param Data: 16 bit data to be written as variable value + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - PAGE_FULL: if valid page is full + * - NO_VALID_PAGE: if no valid page was found + * - Flash error code: on write Flash error + */ +static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data) +{ + HAL_StatusTypeDef FlashStatus = HAL_OK; + uint16_t ValidPage = PAGE0; + uint32_t Address = EEPROM_START_ADDRESS, PageEndAddress = EEPROM_START_ADDRESS+PAGE_SIZE; + + /* Get valid Page for write operation */ + ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE); + + /* Check if there is no valid page */ + if (ValidPage == NO_VALID_PAGE) + { + return NO_VALID_PAGE; + } + + /* Get the valid Page start Address */ + Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE)); + + /* Get the valid Page end Address */ + PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 1) + (uint32_t)((ValidPage + 1) * PAGE_SIZE)); + + /* Check each active page address starting from begining */ + while (Address < PageEndAddress) + { + /* Verify if Address and Address+2 contents are 0xFFFFFFFF */ + if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF) + { + /* Set variable data */ + FlashStatus = FLASH_ProgramHalfWordF4(Address, Data); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + /* Set variable virtual address */ + FlashStatus = FLASH_ProgramHalfWordF4(Address + 2, VirtAddress); + /* Return program operation status */ + return FlashStatus; + } + else + { + /* Next address location */ + Address = Address + 4; + } + } + + /* Return PAGE_FULL in case the valid page is full */ + return PAGE_FULL; +} + +/** + * @brief Transfers last updated variables data from the full Page to + * an empty one. + * @param VirtAddress: 16 bit virtual address of the variable + * @param Data: 16 bit data to be written as variable value + * @retval Success or error status: + * - FLASH_COMPLETE: on success + * - PAGE_FULL: if valid page is full + * - NO_VALID_PAGE: if no valid page was found + * - Flash error code: on write Flash error + */ +static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data) +{ + HAL_StatusTypeDef FlashStatus = HAL_OK; + uint32_t NewPageAddress = EEPROM_START_ADDRESS; + uint16_t OldPageId=0; + uint16_t ValidPage = PAGE0, VarIdx = 0; + uint16_t EepromStatus = 0, ReadStatus = 0; + + /* Get active Page for read operation */ + ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE); + + if (ValidPage == PAGE1) /* Page1 valid */ + { + /* New page address where variable will be moved to */ + NewPageAddress = PAGE0_BASE_ADDRESS; + + /* Old page ID where variable will be taken from */ + OldPageId = PAGE1_ID; + } + else if (ValidPage == PAGE0) /* Page0 valid */ + { + /* New page address where variable will be moved to */ + NewPageAddress = PAGE1_BASE_ADDRESS; + + /* Old page ID where variable will be taken from */ + OldPageId = PAGE0_ID; + } + else + { + return NO_VALID_PAGE; /* No valid Page */ + } + + /* Set the new Page status to RECEIVE_DATA status */ + FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, RECEIVE_DATA); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + + /* Write the variable passed as parameter in the new active page */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) + { + return EepromStatus; + } + + /* Transfer process: transfer variables from old to the new active page */ + for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) + { + if (VirtAddVarTab[VarIdx] != VirtAddress) /* Check each variable except the one passed as parameter */ + { + /* Read the other last variable updates */ + ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); + /* In case variable corresponding to the virtual address was found */ + if (ReadStatus != 0x1) + { + /* Transfer the variable to the new active page */ + EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); + /* If program operation was failed, a Flash error code is returned */ + if (EepromStatus != HAL_OK) + { + return EepromStatus; + } + } + } + } + + /* Erase the old Page: Set old Page status to ERASED status */ + FlashStatus = FLASH_EraseSectorF4(OldPageId); + /* If erase operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + + /* Set new Page status to VALID_PAGE status */ + FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, VALID_PAGE); + /* If program operation was failed, a Flash error code is returned */ + if (FlashStatus != HAL_OK) + { + return FlashStatus; + } + + /* Return last operation flash status */ + return FlashStatus; +} + +/* flash operation */ + +#define EraseTimeout ((uint32_t)0x00000FFF) +#define ProgramTimeout ((uint32_t)0x0000001F) + +#define FLASH_PSIZE_BYTE 0 +#define FLASH_PSIZE_HFWORD FLASH_CR_PSIZE_0 +#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1 +#define FLASH_CR_SNB_Pos 3 +#define FLASH_KEY1_F4 0x45670123 +#define FLASH_KEY2_F4 0xCDEF89AB + +#define ASSERT(exp) (void)((0)) + +static void Flash_Delay(void) +{ + __IO uint32_t i = 0; + for(i = 0xFF; i != 0; i--) { } +} + +static HAL_StatusTypeDef FLASH_GetStatus(void) +{ + if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY) + return HAL_BUSY; + + if ((FLASH->SR & (FLASH_SR_PGSERR|FLASH_SR_PGPERR|FLASH_SR_PGAERR)) != 0) + return HAL_ERROR; + + if ((FLASH->SR & FLASH_SR_WRPERR) != 0 ) + return HAL_ERROR; + + if ((FLASH->SR & FLASH_SR_SOP) != 0 ) + return HAL_ERROR; + + return HAL_OK; +} + +static HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t timeout) +{ + /* Check for the Flash Status */ + HAL_StatusTypeDef status = FLASH_GetStatus(); + /* Wait for a Flash operation to complete or a TIMEOUT to occur */ + while ((status == HAL_BUSY) && (timeout != 0x00)) + { + Flash_Delay(); + status = FLASH_GetStatus(); + timeout--; + } + if (timeout == 0) + status = HAL_TIMEOUT; + + return status; +} +HAL_StatusTypeDef FLASH_UnlockF4(void) +{ + FLASH->KEYR = FLASH_KEY1_F4; + FLASH->KEYR = FLASH_KEY2_F4; + return HAL_OK; +} + +HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector) +{ + HAL_StatusTypeDef status = HAL_OK; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + + if(status == HAL_OK) { + /* if the previous operation is completed, proceed to erase the page */ + CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); + FLASH->CR |= FLASH_PSIZE_WORD; + CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); + FLASH->CR |= FLASH_CR_SER | (sector << FLASH_CR_SNB_Pos); + FLASH->CR |= FLASH_CR_STRT; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(EraseTimeout); + if(status != HAL_TIMEOUT) + { + /* if the erase operation is completed, disable the PER Bit */ + FLASH->CR &= ~FLASH_CR_SNB; + FLASH->CR &= ~FLASH_CR_SER; + } + + FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_WRPERR); + } + /* Return the Erase Status */ + return status; +} + +HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + if (IS_FLASH_ADDRESS(address)) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status == HAL_OK) { + // set size to byte + FLASH->CR &= ~FLASH_CR_PSIZE; + FLASH->CR |= FLASH_PSIZE_HFWORD; + FLASH->CR |= FLASH_CR_PG; + + *(__IO uint16_t*)address = data; + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(ProgramTimeout); + if(status != HAL_TIMEOUT) + { + /* if the program operation is completed, disable the PG Bit */ + FLASH->CR &= ~FLASH_CR_PG; + } + FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR | FLASH_SR_WRPERR); + } + } + return status; +} + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2017 STMicroelectronics *****END OF FILE****/ diff --git a/keyboards/matrix/noah/eeprom_f4.h b/keyboards/matrix/noah/eeprom_f4.h new file mode 100644 index 0000000000..bc4fa08cfc --- /dev/null +++ b/keyboards/matrix/noah/eeprom_f4.h @@ -0,0 +1,130 @@ +/** + ****************************************************************************** + * @file EEPROM/EEPROM_Emulation/inc/eeprom.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the EEPROM + * emulation firmware library. + ****************************************************************************** + * @attention + * + *

© Copyright � 2017 STMicroelectronics International N.V. + * All rights reserved.

+ * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __EEPROM_H +#define __EEPROM_H + + +/* Includes ------------------------------------------------------------------*/ +#include "hal.h" + +typedef enum +{ + HAL_OK = 0x00U, + HAL_ERROR = 0x01U, + HAL_BUSY = 0x02U, + HAL_TIMEOUT = 0x03U +} HAL_StatusTypeDef; + +/* Exported constants --------------------------------------------------------*/ +/* EEPROM emulation firmware error codes */ +#define EE_OK (uint32_t)HAL_OK +#define EE_ERROR (uint32_t)HAL_ERROR +#define EE_BUSY (uint32_t)HAL_BUSY +#define EE_TIMEOUT (uint32_t)HAL_TIMEOUT + +/* Define the size of the sectors to be used */ +#define PAGE_SIZE (uint32_t)0x4000 /* Page size = 16KByte */ + +/* Device voltage range supposed to be [2.7V to 3.6V], the operation will + be done by word */ +#define VOLTAGE_RANGE (uint8_t)VOLTAGE_RANGE_3 + +/* EEPROM start address in Flash */ +#define EEPROM_START_ADDRESS ((uint32_t)0x08008000) /* EEPROM emulation start address: + from sector2 : after 16KByte of used + Flash memory */ + +/* Pages 0 and 1 base and end addresses */ +#define PAGE0_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x0000)) +#define PAGE0_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (PAGE_SIZE - 1))) +#define PAGE0_ID 2//FLASH_SECTOR_2 + +#define PAGE1_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x4000)) +#define PAGE1_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (2 * PAGE_SIZE - 1))) +#define PAGE1_ID 3//FLASH_SECTOR_3 + +/* Used Flash pages for EEPROM emulation */ +#define PAGE0 ((uint16_t)0x0000) +#define PAGE1 ((uint16_t)0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/ + +/* No valid page define */ +#define NO_VALID_PAGE ((uint16_t)0x00AB) + +/* Page status definitions */ +#define ERASED ((uint16_t)0xFFFF) /* Page is empty */ +#define RECEIVE_DATA ((uint16_t)0xEEEE) /* Page is marked to receive data */ +#define VALID_PAGE ((uint16_t)0x0000) /* Page containing valid data */ + +/* Valid pages in read and write defines */ +#define READ_FROM_VALID_PAGE ((uint8_t)0x00) +#define WRITE_IN_VALID_PAGE ((uint8_t)0x01) + +/* Page full define */ +#define PAGE_FULL ((uint8_t)0x80) + +/* Variables' number */ +#define NB_OF_VAR ((uint8_t)0x16) + +/* Exported types ------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +HAL_StatusTypeDef FLASH_UnlockF4(void); +HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector); +HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data); + +uint16_t EE_Init(void); +uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data); +uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data); + +#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= EEPROM_START_ADDRESS) && ((ADDRESS) < PAGE1_END_ADDRESS)) +#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) >= PAGE0_ID) && ((SECTOR) <= PAGE1_ID)) + +#endif /* __EEPROM_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/keyboards/matrix/noah/halconf.h b/keyboards/matrix/noah/halconf.h new file mode 100644 index 0000000000..8c42571983 --- /dev/null +++ b/keyboards/matrix/noah/halconf.h @@ -0,0 +1,388 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/matrix/noah/info.json b/keyboards/matrix/noah/info.json new file mode 100644 index 0000000000..2c40b59809 --- /dev/null +++ b/keyboards/matrix/noah/info.json @@ -0,0 +1,721 @@ +{ + "keyboard_name": "NOAH", + "url": "", + "maintainer": "astro", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_default": { + "key_count": 68, + "layout": [ + { + "label": "~", + "x": 0, + "y": 0 + }, + { + "label": "!", + "x": 1, + "y": 0 + }, + { + "label": "@", + "x": 2, + "y": 0 + }, + { + "label": "#", + "x": 3, + "y": 0 + }, + { + "label": "$", + "x": 4, + "y": 0 + }, + { + "label": "%", + "x": 5, + "y": 0 + }, + { + "label": "^", + "x": 6, + "y": 0 + }, + { + "label": "&", + "x": 7, + "y": 0 + }, + { + "label": "*", + "x": 8, + "y": 0 + }, + { + "label": "(", + "x": 9, + "y": 0 + }, + { + "label": ")", + "x": 10, + "y": 0 + }, + { + "label": "_", + "x": 11, + "y": 0 + }, + { + "label": "+", + "x": 12, + "y": 0 + }, + { + "label": "|", + "x": 13, + "y": 0 + }, + { + "label":"Backspace", + "x": 14, + "y": 0 + }, + { + "label":"Print Screen", + "x": 15, + "y": 0 + }, + { + "label": "Tab", + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "label": "Q", + "x": 1.5, + "y": 1 + }, + { + "label": "W", + "x": 2.5, + "y": 1 + }, + { + "label": "E", + "x": 3.5, + "y": 1 + }, + { + "label": "R", + "x": 4.5, + "y": 1 + }, + { + "label": "T", + "x": 5.5, + "y": 1 + }, + { + "label": "Y", + "x": 6.5, + "y": 1 + }, + { + "label": "U", + "x": 7.5, + "y": 1 + }, + { + "label": "I", + "x": 8.5, + "y": 1 + }, + { + "label": "O", + "x": 9.5, + "y": 1 + }, + { + "label": "P", + "x": 10.5, + "y": 1 + }, + { + "label": "{", + "x": 11.5, + "y": 1 + }, + { + "label": "}", + "x": 12.5, + "y": 1 + }, + { + "label": "|", + "x": 13.5, + "y": 1, + "w": 1.5 + }, + { "label": "Page Up", + "x": 15, + "y": 1 + }, + { + "label": "Caps Lock", + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "label": "A", + "x": 1.75, + "y": 2 + }, + { + "label": "S", + "x": 2.75, + "y": 2 + }, + { + "label": "D", + "x": 3.75, + "y": 2 + }, + { + "label": "F", + "x": 4.75, + "y": 2 + }, + { + "label": "G", + "x": 5.75, + "y": 2 + }, + { + "label": "H", + "x": 6.75, + "y": 2 + }, + { + "label": "J", + "x": 7.75, + "y": 2 + }, + { + "label": "K", + "x": 8.75, + "y": 2 + }, + { + "label": "L", + "x": 9.75, + "y": 2 + }, + { + "label": ":", + "x": 10.75, + "y": 2 + }, + { + "label": "\"", + "x": 11.75, + "y": 2 + }, + { + "label": "Enter", + "x": 12.75, + "y": 2, + "w": 2.25 + }, + { + "label": "Page Down", + "x": 15, + "y": 2 + }, + { + "label": "Shift", + "x": 0, + "y": 3, + "w": 2.25 + }, + { + "label": "Z", + "x": 2.25, + "y": 3 + }, + { + "label": "X", + "x": 3.25, + "y": 3 + }, + { + "label": "C", + "x": 4.25, + "y": 3 + }, + { + "label": "V", + "x": 5.25, + "y": 3 + }, + { + "label": "B", + "x": 6.25, + "y": 3 + }, + { + "label": "N", + "x": 7.25, + "y": 3 + }, + { + "label": "M", + "x": 8.25, + "y": 3 + }, + { + "label": "<", + "x": 9.25, + "y": 3 + }, + { + "label": ">", + "x": 10.25, + "y": 3 + }, + { + "label": "?", + "x": 11.25, + "y": 3 + }, + { + "label": "Shift", + "x": 12.25, + "y": 3, + "w": 1.75 + }, + { + "label": "Up", + "x": 14, + "y": 3 + }, + { + "label": "End" + "x": 15, + "y": 3 + }, + { + "label": "Ctrl", + "x": 0, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 1.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Alt", + "x": 2.5, + "y": 4, + "w": 1.25 + }, + { + "x": 3.75, + "y": 4, + "w": 6.25 + }, + { + "label": "Alt", + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 11.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Left", + "x": 13, + "y": 4 + }, + { + "label": "Down", + "x": 14, + "y": 4 + }, + { + "label": "Right", + "x": 15, + "y": 4 + } + ] + }, + "LAYOUT_iso": { + "key_count": 68, + "layout": [ + { + "label": "~", + "x": 0, + "y": 0 + }, + { + "label": "!", + "x": 1, + "y": 0 + }, + { + "label": "@", + "x": 2, + "y": 0 + }, + { + "label": "#", + "x": 3, + "y": 0 + }, + { + "label": "$", + "x": 4, + "y": 0 + }, + { + "label": "%", + "x": 5, + "y": 0 + }, + { + "label": "^", + "x": 6, + "y": 0 + }, + { + "label": "&", + "x": 7, + "y": 0 + }, + { + "label": "*", + "x": 8, + "y": 0 + }, + { + "label": "(", + "x": 9, + "y": 0 + }, + { + "label": ")", + "x": 10, + "y": 0 + }, + { + "label": "_", + "x": 11, + "y": 0 + }, + { + "label": "+", + "x": 12, + "y": 0 + }, + { + "label": "Backspace", + "x": 13, + "y": 0, + "w": 2 + }, + { + "label": "Print Screen", + "x": 15, + "y": 0 + }, + { + "label": "Tab", + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "label": "Q", + "x": 1.5, + "y": 1 + }, + { + "label": "W", + "x": 2.5, + "y": 1 + }, + { + "label": "E", + "x": 3.5, + "y": 1 + }, + { + "label": "R", + "x": 4.5, + "y": 1 + }, + { + "label": "T", + "x": 5.5, + "y": 1 + }, + { + "label": "Y", + "x": 6.5, + "y": 1 + }, + { + "label": "U", + "x": 7.5, + "y": 1 + }, + { + "label": "I", + "x": 8.5, + "y": 1 + }, + { + "label": "O", + "x": 9.5, + "y": 1 + }, + { + "label": "P", + "x": 10.5, + "y": 1 + }, + { + "label": "{", + "x": 11.5, + "y": 1 + }, + { + "label": "}", + "x": 12.5, + "y": 1 + }, + { + "label": "Enter", + "x": 13.75, + "y": 1, + "w": 1.25, + "h": 2 + }, + { + "label": "Page Up", + "x": 15, + "y": 1 + }, + { + "label": "Caps Lock", + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "label": "A", + "x": 1.75, + "y": 2 + }, + { + "label": "S", + "x": 2.75, + "y": 2 + }, + { + "label": "D", + "x": 3.75, + "y": 2 + }, + { + "label": "F", + "x": 4.75, + "y": 2 + }, + { + "label": "G", + "x": 5.75, + "y": 2 + }, + { + "label": "H", + "x": 6.75, + "y": 2 + }, + { + "label": "J", + "x": 7.75, + "y": 2 + }, + { + "label": "K", + "x": 8.75, + "y": 2 + }, + { + "label": "L", + "x": 9.75, + "y": 2 + }, + { + "label": ":", + "x": 10.75, + "y": 2 + }, + { + "label": "\"", + "x": 11.75, + "y": 2 + }, + { + "label": "|", + "x": 12.75, + "y": 2 + }, + { + "label": "Page Down", + "x": 15, + "y": 2 + }, + { + "label": "Shift", + "x": 0, + "y": 3, + "w": 1.25 + }, + { + "label":"Win", + "x": 1.25, + "y": 3 + }, + { + "label": "Z", + "x": 2.25, + "y": 3 + }, + { + "label": "X", + "x": 3.25, + "y": 3 + }, + { + "label": "C", + "x": 4.25, + "y": 3 + }, + { + "label": "V", + "x": 5.25, + "y": 3 + }, + { + "label": "B", + "x": 6.25, + "y": 3 + }, + { + "label": "N", + "x": 7.25, + "y": 3 + }, + { + "label": "M", + "x": 8.25, + "y": 3 + }, + { + "label": "<", + "x": 9.25, + "y": 3 + }, + { + "label": ">", + "x": 10.25, + "y": 3 + }, + { + "label": "?", + "x": 11.25, + "y": 3 + }, + { + "label": "Shift", + "x": 12.25, + "y": 3, + "w": 1.75 + }, + { + "label": "Up", + "x": 14, + "y": 3 + }, + { + "label": "End", + "x": 15, + "y": 3 + }, + { + "label": "Ctrl", + "x": 0, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 1.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Alt", + "x": 2.5, + "y": 4, + "w": 1.25 + }, + { + "x": 3.75, + "y": 4, + "w": 6.25 + }, + { + "label": "Alt", + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 11.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Left", + "x": 13, + "y": 4 + }, + { + "label": "Down", + "x": 14, + "y": 4 + }, + { + "label": "Right", + "x": 15, + "y": 4 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/matrix/noah/keymaps/default/keymap.c b/keyboards/matrix/noah/keymaps/default/keymap.c new file mode 100644 index 0000000000..44ac206ee4 --- /dev/null +++ b/keyboards/matrix/noah/keymaps/default/keymap.c @@ -0,0 +1,20 @@ +/** + * keymap.c + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_default( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), + [1] = LAYOUT_default( + KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______,_______, _______, _______, _______), +}; diff --git a/keyboards/matrix/noah/keymaps/splitspace/keymap.c b/keyboards/matrix/noah/keymaps/splitspace/keymap.c new file mode 100644 index 0000000000..e18de67d41 --- /dev/null +++ b/keyboards/matrix/noah/keymaps/splitspace/keymap.c @@ -0,0 +1,20 @@ +/** + * keymap.c + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_default_splitspace( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), + [1] = LAYOUT_default_splitspace( + KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/matrix/noah/ld/noah_boot.ld b/keyboards/matrix/noah/ld/noah_boot.ld new file mode 100644 index 0000000000..3abdd1529b --- /dev/null +++ b/keyboards/matrix/noah/ld/noah_boot.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xE memory setup. + */ +MEMORY +{ + flash0 : org = 0x08020000, len = 512k-128k + flash1 : org = 0x00000000, len = 0 + flash2 : org = 0x00000000, len = 0 + flash3 : org = 0x00000000, len = 0 + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x20000000, len = 128k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/matrix/noah/matrix.c b/keyboards/matrix/noah/matrix.c new file mode 100644 index 0000000000..02861a8e37 --- /dev/null +++ b/keyboards/matrix/noah/matrix.c @@ -0,0 +1,166 @@ +/** + * matrix.c + */ + +#include +#include +#include +#include "hal.h" +#include "quantum.h" +#include "timer.h" +#include "wait.h" +#include "printf.h" +#include "matrix.h" + +/** + * + * Row pins are input with internal pull-down. + * Column pins are output and strobe with high. + * Key is high or 1 when it turns on. + * + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_COLS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + +void matrix_init(void) +{ + //debug_enable = true; + palSetLineMode(LINE_COL_1, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_2, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_3, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_4, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_5, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_6, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_7, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_8, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_9, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_10, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_11, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_12, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_13, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_14, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(LINE_COL_15, PAL_MODE_OUTPUT_PUSHPULL); + + palSetLineMode(LINE_ROW_1, PAL_MODE_INPUT_PULLDOWN); + palSetLineMode(LINE_ROW_2, PAL_MODE_INPUT_PULLDOWN); + palSetLineMode(LINE_ROW_3, PAL_MODE_INPUT_PULLDOWN); + palSetLineMode(LINE_ROW_4, PAL_MODE_INPUT_PULLDOWN); + palSetLineMode(LINE_ROW_5, PAL_MODE_INPUT_PULLDOWN); + + palClearLine(LINE_COL_1); + palClearLine(LINE_COL_2); + palClearLine(LINE_COL_3); + palClearLine(LINE_COL_4); + palClearLine(LINE_COL_5); + palClearLine(LINE_COL_6); + palClearLine(LINE_COL_7); + palClearLine(LINE_COL_8); + palClearLine(LINE_COL_9); + palClearLine(LINE_COL_10); + palClearLine(LINE_COL_11); + palClearLine(LINE_COL_12); + palClearLine(LINE_COL_13); + palClearLine(LINE_COL_14); + palClearLine(LINE_COL_15); + + memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + for (int col = 0; col < MATRIX_COLS; col++) { + matrix_row_t data = 0; + switch (col) { + case 0: palSetLine(LINE_COL_1); break; + case 1: palSetLine(LINE_COL_2); break; + case 2: palSetLine(LINE_COL_3); break; + case 3: palSetLine(LINE_COL_4); break; + case 4: palSetLine(LINE_COL_5); break; + case 5: palSetLine(LINE_COL_6); break; + case 6: palSetLine(LINE_COL_7); break; + case 7: palSetLine(LINE_COL_8); break; + case 8: palSetLine(LINE_COL_9); break; + case 9: palSetLine(LINE_COL_10); break; + case 10: palSetLine(LINE_COL_11); break; + case 11: palSetLine(LINE_COL_12); break; + case 12: palSetLine(LINE_COL_13); break; + case 13: palSetLine(LINE_COL_14); break; + case 14: palSetLine(LINE_COL_15); break; + } + + // need wait to settle pin state + wait_us(20); + + data = ( + (palReadLine(LINE_ROW_1) << 0 ) | + (palReadLine(LINE_ROW_2) << 1 ) | + (palReadLine(LINE_ROW_3) << 2 ) | + (palReadLine(LINE_ROW_4) << 3 ) | + (palReadLine(LINE_ROW_5) << 4 ) + ); + + switch (col) { + case 0: palClearLine(LINE_COL_1); break; + case 1: palClearLine(LINE_COL_2); break; + case 2: palClearLine(LINE_COL_3); break; + case 3: palClearLine(LINE_COL_4); break; + case 4: palClearLine(LINE_COL_5); break; + case 5: palClearLine(LINE_COL_6); break; + case 6: palClearLine(LINE_COL_7); break; + case 7: palClearLine(LINE_COL_8); break; + case 8: palClearLine(LINE_COL_9); break; + case 9: palClearLine(LINE_COL_10); break; + case 10: palClearLine(LINE_COL_11); break; + case 11: palClearLine(LINE_COL_12); break; + case 12: palClearLine(LINE_COL_13); break; + case 13: palClearLine(LINE_COL_14); break; + case 14: palClearLine(LINE_COL_15); break; + } + + if (matrix_debouncing[col] != data) { + matrix_debouncing[col] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0; + for (int col = 0; col < MATRIX_COLS; col++) { + matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); + } + } + debouncing = false; + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1< +#include "rgblight.h" +#include "ws2812_f4.h" +extern rgblight_config_t rgblight_config; + +// led 0 for caps lock, led 1 for scroll lock, led 3 for num lock +// led 4 for layer 1, led 5 for layer 2, led 6 for layer 3, led 7 for layer 4 +#if RGBLED_NUM < 7 +#error "MUST set the RGBLED_NUM bigger than 7" +#endif +LED_TYPE noah_leds[RGBLED_NUM]; +static bool noah_led_mode = false; +void rgblight_set(void) { + memset(&noah_leds[0], 0, sizeof(noah_leds)); + if (!rgblight_config.enable) { + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + if (noah_led_mode) { + uint8_t ind_led = host_keyboard_leds(); + if (IS_LED_ON(ind_led, USB_LED_CAPS_LOCK)) { + noah_leds[0] = led[0]; + } + if (IS_LED_ON(ind_led, USB_LED_SCROLL_LOCK)) { + noah_leds[1] = led[1]; + } + if (IS_LED_ON(ind_led, USB_LED_NUM_LOCK)) { + noah_leds[2] = led[2]; + } + for (int32_t i = 0; i < 4; i++) { + if(layer_state_is(i+1)) { + noah_leds[i + 3] = led[i + 3]; + } + } + } else { + memcpy(&noah_leds[0], &led[0], sizeof(noah_leds)); + } + + ws2812_setleds(noah_leds, RGBLED_NUM); +} +#endif + +void matrix_scan_kb(void) { matrix_scan_user(); } + +void matrix_init_kb(void) { + matrix_init_user(); +} +__attribute__((weak)) +void matrix_init_user(void) { +#ifdef RGBLIGHT_ENABLE + ws2812_init(); + rgblight_enable(); +#endif + +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_disable(); +#endif +} + +__attribute__((weak)) +void matrix_scan_user(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif +} + + +#ifdef RGB_MATRIX_ENABLE +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + +// left CB + {0, C1_9, C3_10, C4_10}, + {0, C1_10, C2_10, C4_11}, + {0, C1_11, C2_11, C3_11}, + {0, C1_12, C2_12, C3_12}, + {0, C1_13, C2_13, C3_13}, + {0, C1_14, C2_14, C3_14}, + {0, C1_15, C2_15, C3_15}, + {0, C1_16, C2_16, C3_16}, + + {0, C5_9, C4_9, C6_9}, + {0, C5_16, C4_16, C6_16}, + + {0, C9_9, C8_9, C7_9}, + {0, C9_10, C8_10, C7_10}, + {0, C9_11, C8_11, C7_11}, + {0, C9_12, C8_12, C7_12}, + {0, C9_13, C8_13, C7_13}, + {0, C9_14, C8_14, C7_14}, + {0, C9_15, C8_15, C6_14}, + {0, C9_16, C7_15, C6_15}, + +// left CA + {0, C1_1, C3_2, C4_2}, + {0, C1_2, C2_2, C4_3}, + {0, C1_3, C2_3, C3_3}, + {0, C1_4, C2_4, C3_4}, + {0, C1_5, C2_5, C3_5}, + {0, C1_6, C2_6, C3_6}, + {0, C1_7, C2_7, C3_7}, + {0, C1_8, C2_8, C3_8}, + + {0, C5_1, C4_1, C6_1}, + {0, C5_8, C4_8, C6_8}, + + {0, C9_1, C8_1, C7_1}, + {0, C9_2, C8_2, C7_2}, + {0, C9_3, C8_3, C7_3}, + {0, C9_4, C8_4, C7_4}, + {0, C9_5, C8_5, C7_5}, + {0, C9_6, C8_6, C7_6}, + {0, C9_7, C8_7, C6_6}, + {0, C9_8, C7_7, C6_7}, + +// right CA + {1, C1_1, C3_2, C4_2}, + {1, C1_2, C2_2, C4_3}, + {1, C1_3, C2_3, C3_3}, + {1, C1_4, C2_4, C3_4}, + {1, C1_5, C2_5, C3_5}, + {1, C1_6, C2_6, C3_6}, + {1, C1_7, C2_7, C3_7}, + {1, C1_8, C2_8, C3_8}, + + {1, C5_1, C4_1, C6_1}, + {1, C5_8, C4_8, C6_8}, + + {1, C9_1, C8_1, C7_1}, + {1, C9_2, C8_2, C7_2}, + {1, C9_3, C8_3, C7_3}, + {1, C9_4, C8_4, C7_4}, + {1, C9_5, C8_5, C7_5}, + {1, C9_6, C8_6, C7_6}, + {1, C9_7, C8_7, C6_6}, + {1, C9_8, C7_7, C6_7}, +// right CB + {1, C1_9, C3_10, C4_10}, + {1, C1_10, C2_10, C4_11}, + {1, C1_11, C2_11, C3_11}, + {1, C1_12, C2_12, C3_12}, + {1, C1_13, C2_13, C3_13}, + {1, C1_14, C2_14, C3_14}, + {1, C1_15, C2_15, C3_15}, + {1, C1_16, C2_16, C3_16}, + + {1, C5_9, C4_9, C6_9}, + {1, C5_16, C4_16, C6_16}, + + {1, C9_9, C8_9, C7_9}, + {1, C9_10, C8_10, C7_10}, + {1, C9_11, C8_11, C7_11}, + {1, C9_12, C8_12, C7_12}, + {1, C9_13, C8_13, C7_13}, + {1, C9_14, C8_14, C7_14}, + {1, C9_15, C8_15, C6_14}, + {1, C9_16, C7_15, C6_15}, +}; + +led_config_t g_led_config = { + { + { 1, 2, 3, 4, 5, 6, 7, 36, 37, 38, 39, 40, NO_LED, 41}, + { 0, 8, 10, 11, 12, 13, 14, 44, 46, 47, 48, 49, 50, 51}, + { 30, 18, 26, 9, 19, 15, 16, 17, 55, 56, 57, 58, 59, 60}, + { 29, 31, 32, 33, 20, 21, 23, 22, 54, 62, 64, 65, 66, 63}, + { 34, 35, 27, 25, 67, 68, 69, 70, 71, 61, 53, 45, 42, 43}, + }, + { + { 0, 16},{ 0, 0},{ 15, 0},{ 30, 0},{ 45, 0},{ 60, 0},{ 75, 0},{ 90, 0}, + { 20, 16},{ 42, 32}, + { 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32}, + + { 14, 32},{ 56, 32},{ 50, 48},{ 80, 48},{110, 48},{ 95, 48},{100, 64},{112, 64}, + { 42, 32},{ 38, 64}, + { 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 65, 48},{ 0, 64},{ 19, 64}, + + {105, 0},{120, 0},{135, 0},{150, 0},{165, 0},{180, 0},{202, 0},{224, 0}, + {110, 16},{224, 16}, + {125, 16},{140, 16},{155, 16},{172, 16},{187, 16},{202, 16},{210, 32},{224, 32}, + + {125, 48},{112, 32},{126, 32},{140, 32},{154, 32},{168, 32},{182, 32},{224, 48}, + {140, 48},{200, 48}, + {155, 48},{170, 48},{185, 48},{150, 64},{173, 64},{195, 64},{210, 64},{224, 64} + }, + { + 1, 1, 4, 4, 4, 4, 4, 4, + 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, + 1, 1, 1, 4, 4, 4, 1, 1, + + 4, 4, 4, 4, 4, 4, 1, 1, + 4, 1, + 4, 4, 4, 4, 4, 4, 4, 1, + + 4, 4, 4, 4, 4, 4, 4, 1, + 4, 4, + 4, 4, 4, 1, 1, 1, 1, 1, + } +}; + +#endif + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + #ifdef RGBLIGHT_ENABLE + case KC_F24: // switch the led mode on or off + noah_led_mode = !noah_led_mode; + return false; + + #ifdef RGB_MATRIX_ENABLE + case KC_F13: // toggle rgb matrix + rgb_matrix_toggle(); + return false; + case KC_F14: + rgb_matrix_step(); + return false; + #endif + #endif + default: + break; + } + } + return true; +} diff --git a/keyboards/matrix/noah/noah.h b/keyboards/matrix/noah/noah.h new file mode 100644 index 0000000000..1efb991d96 --- /dev/null +++ b/keyboards/matrix/noah/noah.h @@ -0,0 +1,91 @@ +/** + * noah.h + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_default( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ + {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42,KC_NO,k43,KC_NO,k44, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ +} + +#define LAYOUT_wkl( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k45, k46, k47, k48 \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ + {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ +} + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k45, k46, k47, k48 \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ +} + +#define LAYOUT_default_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ + {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \ +} + +#define LAYOUT_wkl_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ + {k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42, k43, k45,KC_NO,k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \ +} + +#define LAYOUT_iso_splitspace( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a \ +) { \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ + {k40, k41, k42, k43, k45,KC_NO,k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \ +} diff --git a/keyboards/matrix/noah/readme.md b/keyboards/matrix/noah/readme.md new file mode 100644 index 0000000000..788fc18727 --- /dev/null +++ b/keyboards/matrix/noah/readme.md @@ -0,0 +1,19 @@ +# NOAH 65 keyboard + +![NOAH](https://raw.githubusercontent.com/yulei/qmk_webusb_tool/master/public/noah.jpg) +This was the first 65% keyboard made by the Matrix team, it had the following features: + +- per key rgb led +- 7 RGB led for caps, scroll , num lock and layer state indicator, or just play light animation effects +- ansi and iso layouts, and split spacebar supported +- pre-programmed bootloader which emulated usb stick to ease firmware updating + +Keyboard Maintainer: [astro](https://github.com/yulei) +Hardware Supported: Matrix NOAH keyboard +Hardware Availability: [NOAH Keybaord](https://geekhack.org/index.php?topic=102300.0) + +Make example for this keyboard (after setting up your build environment): + + make matrix/noah:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk new file mode 100644 index 0000000000..217e780d87 --- /dev/null +++ b/keyboards/matrix/noah/rules.mk @@ -0,0 +1,57 @@ +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F4xx + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = noah_boot + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f4xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = noah_bd + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +OPT_DEFS = + +# Options to pass to dfu-util when flashing +#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +#DFU_SUFFIX_ARGS = -p DF11 -v 0483 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover +NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in + +CUSTOM_MATRIX = yes +RGB_MATRIX_ENABLE = yes + +RGBLIGHT_ENABLE = yes +RGBLIGHT_CUSTOM_DRIVER = yes + +# project specific files +SRC += \ + matrix.c \ + ws2812_f4.c \ + eeprom_f4.c diff --git a/keyboards/matrix/noah/ws2812_f4.c b/keyboards/matrix/noah/ws2812_f4.c new file mode 100644 index 0000000000..7536d6d8c2 --- /dev/null +++ b/keyboards/matrix/noah/ws2812_f4.c @@ -0,0 +1,272 @@ +/** + * @file ws2812.c + * @author Austin Glaser , Joerg Wangemann + * @brief WS2812 LED driver + * + * Copyright (C) 2016 Austin Glaser, 2017 Joerg Wangemann + * + * This software may be modified and distributed under the terms + * of the MIT license. See the LICENSE file for details. + * + * @todo Put in names and descriptions of variables which need to be defined to use this file + * + * @addtogroup WS2812 + * @{ + */ + +/* --- PRIVATE DEPENDENCIES ------------------------------------------------- */ + +// This Driver +#include "ws2812_f4.h" + +// Standard +#include + +// ChibiOS +#include "ch.h" +#include "hal.h" + +#include "wait.h" +// Application +//#include "board.h" + +// TODO: Add these #define's to the headers of your project. +// Pin, timer and dma are all connected, check them all if you change one. +// Tested with STM32F4, working at 144 or 168 MHz. +//#define WS2812_LED_N 2 // Number of LEDs +//#define PORT_WS2812 GPIOB +//#define PIN_WS2812 9 +//#define WS2812_TIM_N 4 // timer, 1-11 +//#define WS2812_TIM_CH 3 // timer channel, 0-3 +//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) +//#define WS2812_DMA_CHANNEL 6 // DMA channel for TIMx_UP +// The WS2812 expects 5V signal level (or at least 0.7 * VDD). Sometimes it works +// with a 3V signal level, otherwise the easiest way to get the signal level to 5V +// is to add an external pullup resistor from the DI pin to 5V (10k will do) and +// configure the pin as open drain. +// (An SMD resistor is easily solders on the connections of a light strip) +// Uncomment the next line if an external pullup resistor is used. +//#define WS2812_EXTERNAL_PULLUP + +/* --- CONFIGURATION CHECK -------------------------------------------------- */ + +#if !defined(WS2812_LED_N) + #error WS2812 LED chain length not specified +#elif WS2812_LED_N <= 0 + #error WS2812 LED chain length set to invalid value +#endif + +#if !defined(WS2812_TIM_N) + #error WS2812 timer not specified +#endif +#if defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32F7XX) + #if WS2812_TIM_N <= 2 + #define WS2812_AF 1 + #elif WS2812_TIM_N <= 5 + #define WS2812_AF 2 + #elif WS2812_TIM_N <= 11 + #define WS2812_AF 3 + #endif +#elif !defined(WS2812_AF) + #error WS2812_AF timer alternate function not specified +#endif + +#if !defined(WS2812_TIM_CH) + #error WS2812 timer channel not specified +#elif WS2812_TIM_CH >= 4 + #error WS2812 timer channel set to invalid value +#endif + +/* --- PRIVATE CONSTANTS ---------------------------------------------------- */ + +#define WS2812_PWM_FREQUENCY (STM32_SYSCLK/2) /**< Clock frequency of PWM, must be valid with respect to system clock! */ +#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY/800000) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */ + +/** + * @brief Number of bit-periods to hold the data line low at the end of a frame + * + * The reset period for each frame must be at least 50 uS; so we add in 50 bit-times + * of zeroes at the end. (50 bits)*(1.25 uS/bit) = 62.5 uS, which gives us some + * slack in the timing requirements + */ +#define WS2812_RESET_BIT_N (50) +#define WS2812_COLOR_BIT_N (WS2812_LED_N*24) /**< Number of data bits */ +#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */ + +/** + * @brief High period for a zero, in ticks + * + * Per the datasheet: + * WS2812: + * - T0H: 200 nS to 500 nS, inclusive + * - T0L: 650 nS to 950 nS, inclusive + * WS2812B: + * - T0H: 200 nS to 500 nS, inclusive + * - T0L: 750 nS to 1050 nS, inclusive + * + * The duty cycle is calculated for a high period of 350 nS. + */ +#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY/(1000000000/450)) + +/** + * @brief High period for a one, in ticks + * + * Per the datasheet: + * WS2812: + * - T1H: 550 nS to 850 nS, inclusive + * - T1L: 450 nS to 750 nS, inclusive + * WS2812B: + * - T1H: 750 nS to 1050 nS, inclusive + * - T1L: 200 nS to 500 nS, inclusive + * + * The duty cycle is calculated for a high period of 800 nS. + * This is in the middle of the specifications of the WS2812 and WS2812B. + */ +#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY/(1000000000/900)) + +/* --- PRIVATE MACROS ------------------------------------------------------- */ + +/** + * @brief Generates a reference to a numbered PWM driver + * + * @param[in] n: The driver (timer) number + * + * @return A reference to the driver + */ +#define PWMD(n) CONCAT_EXPANDED_SYMBOLS(PWMD, n) + +#define WS2812_PWMD PWMD(WS2812_TIM_N) /**< The PWM driver to use for the LED chain */ + +/** + * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit + * + * @param[in] led: The led index [0, @ref WS2812_LED_N) + * @param[in] byte: The byte number [0, 2] + * @param[in] bit: The bit number [0, 7] + * + * @return The bit index + */ +#define WS2812_BIT(led, byte, bit) (24*(led) + 8*(byte) + (7 - (bit))) + +/** + * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit + * + * @note The red byte is the middle byte in the color packet + * + * @param[in] led: The led index [0, @ref WS2812_LED_N) + * @param[in] bit: The bit number [0, 7] + * + * @return The bit index + */ +#define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit)) + +/** + * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit + * + * @note The green byte is the first byte in the color packet + * + * @param[in] led: The led index [0, @ref WS2812_LED_N) + * @param[in] bit: The bit number [0, 7] + * + * @return The bit index + */ +#define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit)) + +/** + * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit + * + * @note The blue byte is the last byte in the color packet + * + * @param[in] led: The led index [0, @ref WS2812_LED_N) + * @param[in] bit: The bit index [0, 7] + * + * @return The bit index + */ +#define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit)) + +/* --- PRIVATE VARIABLES ---------------------------------------------------- */ + +static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */ + +/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */ +/* + * Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for +the memory (while the DMA is reading/writing from/to a buffer, the application can +write/read to/from the other buffer). + */ + +void ws2812_init(void) +{ + // Initialize led frame buffer + uint32_t i; + for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle + for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero + // Configure pin as AF output. If there's an external pull up resistor the signal level is brought to 5V using open drain mode. +#ifdef WS2812_EXTERNAL_PULLUP + palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_OPENDRAIN); +#else + palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_PUSHPULL); //PAL_MODE_STM32_ALTERNATE_PUSHPULL); +#endif + //palClearPad(PORT_WS2812, PIN_WS2812); + //wait_ms(1); + // PWM Configuration + #pragma GCC diagnostic ignored "-Woverride-init" // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config + static const PWMConfig ws2812_pwm_config = { + .frequency = WS2812_PWM_FREQUENCY, + .period = WS2812_PWM_PERIOD, //Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben + .callback = NULL, + .channels = { + [0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled + [WS2812_TIM_CH] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}, // Turn on the channel we care about + }, + .cr2 = 0, + .dier = TIM_DIER_UDE, // DMA on update event for next period + }; + #pragma GCC diagnostic pop // Restore command-line warning options + + // Configure DMA + //dmaInit(); // Joe added this + dmaStreamAllocate(WS2812_DMA_STREAM, 10, NULL, NULL); + dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWMD.tim->CCR[WS2812_TIM_CH])); // Ziel ist der An-Zeit im Cap-Comp-Register + dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer); + dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N); + dmaStreamSetMode(WS2812_DMA_STREAM, + STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | + STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3)); + // M2P: Memory 2 Periph; PL: Priority Level + + // Start DMA + dmaStreamEnable(WS2812_DMA_STREAM); + + // Configure PWM + // NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the + // ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer, + // disable counting, enable the channel, and then make whatever configuration changes we need. + pwmStart(&WS2812_PWMD, &ws2812_pwm_config); + pwmEnableChannel(&WS2812_PWMD, WS2812_TIM_CH, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in +} + +ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b) +{ + // Check for valid LED + if (led_number > WS2812_LED_N) return WS2812_LED_INVALID; + + // Write color to frame buffer + for (uint32_t bit = 0; bit < 8; bit++) { + ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + } + + // Success + return WS2812_SUCCESS; +} + +void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) +{ + for(int i = 0; i < number_of_leds; i++) { + ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b); + } +} + +/** @} addtogroup WS2812 */ diff --git a/keyboards/matrix/noah/ws2812_f4.h b/keyboards/matrix/noah/ws2812_f4.h new file mode 100644 index 0000000000..245bd15fef --- /dev/null +++ b/keyboards/matrix/noah/ws2812_f4.h @@ -0,0 +1,102 @@ +/** + * @file ws2812.h + * @author Austin Glaser + * @brief Interface to WS2812 LED driver + * + * Copyright (C) 2016 Austin Glaser + * + * This software may be modified and distributed under the terms + * of the MIT license. See the LICENSE file for details. + * + * @todo Put in names and descriptions of variables which need to be defined to use this file + */ + +#ifndef WS2812_H_ +#define WS2812_H_ + +/** + * @defgroup WS2812 WS2812 Driver + * @{ + * + * @brief DMA-based WS2812 LED driver + * + * A driver for WS2812 LEDs + */ + +/* --- PUBLIC DEPENDENCIES -------------------------------------------------- */ + +// Standard +#include +#include "color.h" + +/* --- PUBLIC MACROS -------------------------------------------------------- */ + +/** + * @brief Concatenates two symbols s1 and s2 exactly, without expanding either + * + * @param[in] s1: The first symbol to concatenate + * @param[in] s2: The second symbol to concatenate + * + * @return A single symbol containing s1 and s2 concatenated without expansion + */ +#define CONCAT_SYMBOLS(s1, s2) s1##s2 + +/** + * @brief Concatenate the symbols s1 and s2, expanding both of them + * + * This is important because simply applying s1##s2 doesn't expand them if they're + * preprocessor tokens themselves + * + * @param[in] s1: The first symbol to concatenate + * @param[in] s2: The second symbol to concatenate + * + * @return A single symbol containing s1 expanded followed by s2 expanded + */ +#define CONCAT_EXPANDED_SYMBOLS(s1, s2) CONCAT_SYMBOLS(s1, s2) + +/* --- PUBLIC CONSTANTS ----------------------------------------------------- */ + +/** + * @brief Return codes from ws2812 interface functions + */ +typedef enum { + WS2812_SUCCESS = 0x00, /**< Operation completeed successfully */ + WS2812_LED_INVALID, /**< Attempted to index an invalid LED (@ref WS2812_N_LEDS) */ + MAX_WS2812_ERR, /**< Total number of possible error codes */ + WS2812_ERR_INVALID /**< Invalid error value */ +} ws2812_err_t; + +/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */ + +/** + * @brief Initialize the driver + * + * After this function is called, all necessary background tasks will be started. + * The frame is initially dark. + */ +void ws2812_init(void); + +/** + * @brief Write the value of a single LED in the chain + * + * The color value is written to a frame buffer, and will not + * be updated until the next frame is written. Frames are written + * at the maximum possible speed -- the longest latency between a + * call to this function and the value being displayed is + * 1.25uS*(24*@ref WS2812_LED_N + 50) + * + * @param[in] led_number: The index of the LED to be written. Must be strictly less than + * @ref WS2812_N_LEDS + * @param[in] r: The red level of the LED + * @param[in] g: The green level of the LED + * @param[in] b: The blue level of the LED + * + * @retval WS2812_SUCCESS: The write was successful + * @retval WS2812_LED_INVALID: The write was to an invalid LED index + */ +ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b); + +void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); +/** @} defgroup WS2812 */ + +#endif // ifndef WS2812_H_ -- cgit v1.2.3