From 67dae1222f6c73242ffbd3b500530d3346806708 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pablo=20Mart=C3=ADnez?= <58857054+elpekenin@users.noreply.github.com> Date: Thu, 23 Mar 2023 23:35:02 +0100 Subject: [Documentation] Pointing device minor rewrite (#19641) --- docs/feature_pointing_device.md | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index ecb7ee42cb..0089dc7024 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -20,13 +20,13 @@ To use the ADNS 5050 sensor, add this to your `rules.mk` POINTING_DEVICE_DRIVER = adns5050 ``` -The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. +The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. -| Setting | Description | Default | -| ------------------- | ------------------------------------------------------------------ | -------------------------- | -| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | -| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | -| `ADNS5050_CS_PIN` | (Required) The pin connected to the Chip Select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | +| Setting (`config.h`) | Description | Default | +| -------------------- | ------------------------------------------------------------------ | -------------------------- | +| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | +| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | +| `ADNS5050_CS_PIN` | (Required) The pin connected to the Chip Select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | @@ -40,9 +40,9 @@ To use the ADNS 9800 sensor, add this to your `rules.mk` POINTING_DEVICE_DRIVER = adns9800 ``` -The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking. +The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking. -| Setting | Description | Default | +| Setting (`config.h`) | Description | Default | | ----------------------- | ---------------------------------------------------------------------- | ------------------------ | | `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | | `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | @@ -63,7 +63,7 @@ POINTING_DEVICE_DRIVER = analog_joystick The Analog Joystick is an analog (ADC) driven sensor. There are a variety of joysticks that you can use for this. -| Setting | Description | Default | +| Setting (`config.h`) | Description | Default | | --------------------------------- | -------------------------------------------------------------------------- | ------------- | | `ANALOG_JOYSTICK_X_AXIS_PIN` | (Required) The pin used for the vertical/X axis. | _not defined_ | | `ANALOG_JOYSTICK_Y_AXIS_PIN` | (Required) The pin used for the horizontal/Y axis. | _not defined_ | @@ -153,7 +153,7 @@ Additionally, `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` is supported in thi #### Relative mode gestures -| Gesture Setting | Description | Default | +| Gesture Setting (`config.h`) | Description | Default | | -------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------- | | `CIRQUE_PINNACLE_TAP_ENABLE` | (Optional) Enable tap to "left click". Works on both sides of a split keyboard. | _not defined_ | | `CIRQUE_PINNACLE_SECONDARY_TAP_ENABLE` | (Optional) Tap in upper right corner (half of the finger needs to be outside of the trackpad) of the trackpad will result in "right click". `CIRQUE_PINNACLE_TAP_ENABLE` must be enabled. | _not defined_ | @@ -172,10 +172,10 @@ POINTING_DEVICE_DRIVER = paw3204 The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source. -| Setting | Description | Default | -| ------------------ |--------------------------------------------------------------- | -------------------------- | -| `PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | -| `PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | +| Setting (`config.h`) | Description | Default | +| -------------------- |--------------------------------------------------------------- | -------------------------- | +| `PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | +| `PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI. @@ -189,7 +189,7 @@ POINTING_DEVICE_DRIVER = pimoroni_trackball The Pimoroni Trackball module is a I2C based breakout board with an RGB enable trackball. -| Setting | Description | Default | +| Setting (`config.h`) | Description | Default | | ------------------------------------ | ---------------------------------------------------------------------------------- | ------- | | `PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | | `PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` | @@ -220,7 +220,7 @@ The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI. Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking. If you have different CS wiring on each half you can use `PMW33XX_CS_PIN_RIGHT` or `PMW33XX_CS_PINS_RIGHT` in combination with `PMW33XX_CS_PIN` or `PMW33XX_CS_PINS` to configure both sides independently. If `_RIGHT` values aren't provided, they default to be the same as the left ones. -| Setting | Description | Default | +| Setting (`config.h`) | Description | Default | | ---------------------------- | ------------------------------------------------------------------------------------------- | ------------------------ | | `PMW33XX_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | | `PMW33XX_CS_PINS` | (Alternative) Sets the Chip Select pins connected to multiple sensors. | `{PMW33XX_CS_PIN}` | -- cgit v1.2.3