summaryrefslogtreecommitdiff
path: root/tmk_core
AgeCommit message (Collapse)Author
2018-09-13Keyboard: ALT keymap update and LED driver brightness mismatch fix (#3890)patrickmt
* ALT keymap update Added additional End key on layer 1 to match key cap * LED driver update addressing PR #3871 Update sync between IS31FL3733 drivers is causing varying behavior in keyboards including brightness mismatch and slight flicker at very low rgb values. Visually, disabling sync is not noticeable. Ref PR #3871 by guarnacciaa.
2018-09-11Fix RG Sleep issues for Teensy ControllersDrashna Jaelre
Appearenly, teensy controllers have some issues with waking up. If the rgblight is called "too soon", it will cause the controller to lock up, intermittently. Adding a 10 ms delay seems to fix this issue, as it lets it have enough time to handle things properly. This has been tested extensively on my Ergodox EZ, and can be seen in the @drashna userspace, under the "suspend_wakeup_init_user" function.
2018-09-05CTRL and ALT updatespatrickmt
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created). Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms. Added basic MacOS keymap for ALT. USB sleep LED indicator now turns off after 1 second. Slowed down debug LED code printing.
2018-09-05Add the ability to disable the USB startup check for Chibiosyiancar
- Added support for NO_USB_STARTUP_CHECK. This allows the keyboard do function and not get stuck in a SUSPENDED state loop in case of no USB connection. - Added support for WAIT_FOR_USB. In LUFA no keyboard has this flag enable therefor no keyboard waits for usb to be active. - Added documentation for both configuration flags as they were missing.
2018-09-03fix mousekey callJack Humbert
2018-09-03Enable mouse keys in register_code and unregister_codeSteven Liu
This allows for macros to be assigned to press two mouse directions at same time, which allows for one key diagonals.
2018-09-01Keyboard: Rename alt67 to alt (#3824)patrickmt
Renamed keyboard alt67 to alt and adjusted necessary files where alt67 appeared. CTRL keymap fixed enum structure name. usb2422 removed stray define no longer used.
2018-08-31Fix emulated EEPROM start address on STM32F303 (#3819)ishtob
MCU has 254 flash, changed 250 to 254. tested working on a planck rev6
2018-08-29STM32 EEPROM Emulation (#3741)yiancar
* STM32 EEPROM Emulation - Added EEPROM emulation libaries from libmaple and Arduino_STM32. https://github.com/rogerclarkmelbourne/Arduino_STM32 and https://github.com/leaflabs/libmaple. - Renamed teensy EEPROM library and added conditional selection of library. - Remapped EEPROM memory map for 16 byte blocks (as is with STM32f3xx MCUs). - Added EEPROM initialization in main.c of Chibios. - Added EEPROM format to clear the emulated pages when EEPROM is marked as invalid. * Fixed ifdef
2018-08-29Massdrop keyboard support (#3780)patrickmt
* Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
2018-08-29Fixed bootloader targetJumail
Fixed matching grep matches (for PRODUCT in particular) Fixed " Bootloader" concatenation for WSL (windows line-endings)
2018-08-16Tidy up keycode.h (#3666)fauxpark
* Tidy up keycode.h * Fix spacing here * Add back this comma
2018-08-16change messege at 'check-size' targetmtei
2018-07-22Loop based vusb_transfer_keyboardRasmus Schults
2018-07-22VUSB fix report dropping if usbInterruptIsReady() returns falseRasmus Schults
2018-07-20add col type definesJack Humbert
2018-07-16Adds support for Planck Rev 6 (#2666)Jack Humbert
* initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT
2018-07-15Integrating Peter Fleury's HD44780 LCD library (#3209)Max Audron
* integrated Peter Fleury's LCD library for HD44780 LCDs * fixed typo * cleanup finished * add documentation * added HD44780 documentation * removed keyboard from .gitmodules * resolved merge conflict * removed edit of kira75s rules.mk made by merge * moved hd44780 to drivers/avr * Added licence info to hd44780 files * Added link to hd44780 docs.
2018-06-28Diagonal micro move fixEvgeniy Petukhov
2018-06-28Make sure that both RGBLIGHT_ENABLE is defined, for RGBLIGHT_SLEEPDrashna Jaelre
2018-06-28Disable JTAG in keyboard initDrashna Jaelre
So that all boards, present and future will have JTAG disabled, even if using a custom matrix
2018-06-28Make sure the timer wraps around correctly independent of the os tick frequencyFred Sundvik
2018-06-06Bootloader make issue (#2975)yiancar
* Added Modular keyboards L,R and NUM Created code modules for the 3 modules of the modular keyboard. Original idea by MechboardsUK. Uses i2c implementation similar to lets split * Remove modular from master This is to fix incorrect branching * fixed bootloader makefile - Echo -e does not behave coorectly on mac - Replaced with equivilant printf statements * quick typo fix
2018-06-03Add Suspend functions (#3112)Drashna Jaelre
* Add suspend functions * Disable RGB code if it's disabled * Add suspend code to ChibiOS for future compatibility * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove keyboard init stuff for separate PR
2018-05-29Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)Drashna Jaelre
* And and fix _noeeprom functions to many of the RGB Underglow functions * Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times. But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice! * Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function. * Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes) * Add to predefined colors list * Add new functions to manual/docs * Update RGB Sleep feature to use _noeeprom Because that's exactly what it should be doing, actually!
2018-05-26Fix dead link to USB keycodes doc (#3050)Leo Wzukw
* Fix dead link to USB keycodes doc Link was dead and the fresher version I could find on usb.org is still older than this one. Thus, WaybackMachine seems the best option. * Fix dead link to USB keycodes doc, with 2 options Give the WaybackMachine link (fresher and for reference of the content of the original link) and the usb.org one (older)
2018-05-20Fix compile issues for atmega328pDrashna Jaelre
2018-05-14Allow one-shot modifiers to be chainedGergely Nagy
Many a times one would want to use multiple modifiers with the same key, preferably without having to hold anything, like `Ctrl+Shift+C` or `Ctrl+Shift+V` to copy/paste in GNOME Terminal. To make this possible, we need to be able to chain one-shot modifiers, so that we can have multiple of them active at the same time. The easiest way to accomplish this is that whenever we activate a one-shot modifier, we apply it on top of the existing set, instead of re-setting the state. When deactivating, either due to an interrupt, or due to a timeout, we deactivate all oneshots anyway, so the clearing part is covered. When we turn the one-shot modifier into a toggle, that will also clear all one-shot modifiers first, so we covered that case too. Fixes #2796, #1580, and #856. Signed-off-by: Gergely Nagy <qmk@gergo.csillger.hu>
2018-05-08enable eeprom for rgb matrixJack Humbert
2018-04-15Add a custom USB driver for ARM (#2750)fredizzimo
* Copy Chibios serial_usb_driver into the chibios/protocol It's renamed to usb_driver to avoid name conflicts * Make the usb driver compile * Disable ChibiOS serial usb driver for all keyboards * Change usb_main to use QMKUSBDriver * Initialize the usb driver buffers * Add support for fixed size queues * Fix USB driver initialization * Don't transfer an empty packet for fixed size streams
2018-04-11Tabs to spaces in usb_descriptor.hfauxpark
2018-04-03Update whitefox to use the K-Type teensy workaroundKaleb Elwert
2018-03-29Properly always copy firmwareU-LANDSRAAD\drashna
This finishes fixing #2314, which mostly copies the firmware when compiling. However, it misses `:teensy`, `:avrdude` and most importantly, `:production`
2018-03-28Fix RGB Sleep codeU-LANDSRAAD\drashna
2018-03-26Better non-Linux support (#2524)dankm
* grep -> $(GREP) Some UNIXy systems (FreeBSD for example) don't use GNU grep by default. Allow the user to specify which grep implementation to use so that GNU grep can be specified. * Allow using versioned avr-gcc command Don't hardcode "avr-gcc", and allow strings such as "avr-gcc8", or "avr-gcc-7.3.0" to match checks for "avr-gcc".
2018-03-25add syscalls.c if autoshift is enabled, to fix compile issue on ChibiOSU-LANDSRAAD\drashna
2018-03-22Generate API docs from source code comments (#2491)skullydazed
* Generate api docs from source code * Add a bunch of doxygen comments * more doxygen comments * Add the in-progress api docs * script to generate docs from travis * Add doc generation to the travis job * make travis_docs.sh commit the work it does * make sure the docs script exits cleanly
2018-03-19[Proposal?] Allow RGB Underglow to turn off when host is idle/asleep (#2104)Drashna Jaelre
* Add RGB Underglow Sleeping * Add RGBLIGHT_SLEEP to toggle/control RGB light behavior * Update rgb docs * Update for RGB disable command
2018-03-16Add CMD and WIN aliases for KC_GUI, GUI(kc), GUI_T(kc), etc.fauxpark
2018-03-16Fix swap-hands tapping.Joe Wasson
This is an inelegant hack for #2522 but makes things work. Basically we give `action.c` a chance to handle the hold event early so that we can swap the keyboard for later keys. Later, to allow the hold to happen again quickly we nuke the key record so that tapping is reset. I tried to find a cleaner way, honestly.
2018-03-16Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistencyJoe Wasson
2018-03-16fix generate Keyboard.huplus
2018-03-01Fixed dead links (#2451)Brian Choromanski
* Fixed typo of 'confid.h' to 'config.h' * Fixed broken links in docs * Fixed a lot of dead links
2018-02-28Remap msys2 usb, fix USB port detection (#2301)Danny
* Add AVRDUDE to MSYS2 setup * Remap detected USB port in MSYS2 to COM port
2018-02-12Change the CDC_NOTIFICATION_EPSIZE back to 8 from 32Fred Sundvik
2018-02-10Fix reset for STM32 devicesFred Sundvik
2018-02-08add conditional to perform check-size only for supported architecturesMichael F. Lamb
2018-02-08make check_size work across platformsMichael F. Lamb
2018-02-08Switch from echo to printf for output without newlinesDanny Nguyen
2018-02-08Only search through newly detected devices and discard ones that disappearedDanny Nguyen