summaryrefslogtreecommitdiff
path: root/quantum/quantum.h
AgeCommit message (Collapse)Author
2020-03-23Add Post Processing to process_record (#4892)Drashna Jaelre
* Improve process_record system Code based on @colinta's * Rename and better handle functions * Fix incorrect function call to process_record_user * Add documentation for post_process_record * Add both get_event_keycode and get_record_keycode functions And add some comments about these functions * Update code format * Cleanup merge artifacts
2020-03-23Add Word Per Minute calculation feature (#8054)brickbots
* Add Word Per Minute calculation feature * Fix copyright info * Remove header from quantum.c, setup overloadable keycode inclusion for WPM, update docs * Simplify logic for keycode filtering * Adding link from summary to wpm_feature info * Update docs/feature_wpm.md Typo in function prototype example in docs Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Add WPM transport via i2c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-03-03Reduce PROGMEM usage for sendstring LUT (#8109)Ted M Lin
* Reduce PROGMEM usage for keycode map Bit-pack the keycode bool array to gain back a small amount of flash space. The trade-off is an increase in runtime instructions when running macros. It does make the code a bit harder to read, as well as maintain. For configs that use send_string() et al, it saves ~100 bytes. * Switch to macro and common definition Rewrite the array declarations so both the unpacked (original) and packed LUT arrays can use the same value definitions. This is done by defining a macro that "knows what to do". This makes the code much easier to read and maintain. * Fix macro typos and improve perf Pack the bits in a more efficient order for extraction. And also fix the copy/paste error in the macro... * Switch fully to packed LUT Some minor reformatting. Compile tested all sendstring_xyz.h to make sure they were converted properly. Also checked that an unconverted version would generate a compile error. * Apply whitespace suggestions from code review Co-Authored-By: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-292020 February 29 Breaking Changes Update (#8064)James Young
2020-02-04Relocate grave keycode processing (#8082)Joel Challis
* Relocate grave keycode processing * Tidy up code * Refactor grave -> grave_esc
2020-01-26Ensure setPinInput actually sets input high-Z (#6237)Mikkel Jeppesen
* Ensure setPinInput actually sets input high-z * Fixed _PIN_ADDRESS Macro arguments as recommended by vomindoraan * Fixed instances of setInput to use new behavour * Changed kmac matrix to use input with pullups * Update keyboards/gh60/revc/revc.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fixed input state for unselect_rows * fixed merge conflict * Updated all instances of older uses of setPinInput() * Fixed naming mistake Co-authored-by: fauxpark <fauxpark@gmail.com>
2020-01-19Run clang-format manually to fix recently changed files (#7934)Joel Challis
* Run clang-format manually to fix recently changed files * Run clang-format manually to fix recently changed files - revert template files * Run clang-format manually to fix recently changed files - format off for ascii_to_keycode_lut
2020-01-13Relocate common backlight functionally (#7273)Joel Challis
2020-01-03VIA Configurator Refactor (#7268)Wilba
* VIA Refactor * Remove old code * review changes * review changes * Fix cannonkeys/satisfaction75/prototype:via build * Add via.h to quantum.h * Move backlight init to after backlight config load * Merge branch 'master' into via_refactor_pr * Update user's rules.mk to new way of enabling VIA * Added id_switch_matrix_state * Review changes
2019-12-21Add central location for ChibiOS defines (#7542)Joel Challis
* Add central location for chibios defines * Add central location for chibios defines - actually add files this time.... * Add Copyright header * Update include order to resolve i2cv1 build errors
2019-12-16Relocate RGB keycode processing (#7508)Joel Challis
* Move rgb keycode logic to process_keycode * Fixes for rgb matrix * Fixes for mxss * Fix inc/dec logic, add comments * Fix return RAINBOW_SWIRL logic * stop external use of rgb helper functions * merge fix * Fix 'defined but not used' when all animations are disabled
2019-12-03Relocate magic keycode processing (#7512)Joel Challis
* Move magic keycode processing to own file * Save some bytes * Update comments * Update define to one thats not already used... * Fix audio
2019-11-25Send string keycode tweaks (#7471)fauxpark
2019-11-17Run clang-format manually to fix recently changed fileszvecr
2019-11-06New and improved lock LED callbacks (#7215)fauxpark
* New and improved lock LED callbacks * Include stdbool * Update documentation * Use full function signatures and add keyboard-level example
2019-11-04[Core] Convert Dynamic Macro to a Core Feature (#5948)Drashna Jaelre
* Convert Dynamic Macro to a Core Feature This imports the code from Dynamic Macro into the core code, and handles it, as such. This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched. Additionally, this reorganizes the documentation to better reflect the changes. Also, it adds user hooks to the feature so users can customize the existing functionality. Based heavily on and closes #2976 * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Cleanup based on feedback * Add short-form keycodes and document them - add short-form keycodes to quantum/quantum_keycodes.h - document the new aliases in docs/feature_dynamic_macros.md * Add Dynamic Macros section and keycodes to docs/keycodes.md * Make anti-nesting optional * Add documentation for DYNAMIC_MACRO_NO_NESTING option * Fix Merge artifacts * Fix formatting typo in docs Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Remove DYNAMIC_MACRO_RANGE as it's not needed * Fix includes and layer var type
2019-11-02Initial migration of software PWM backlight (#6709)Joel Challis
* Initial migration of software PWM backlight * First pass at backlight driver docs * Correct driver name in docs * Run backlight_task when using BACKLIGHT_PINS * Resolve backlight docs TODOs
2019-09-03Add Dip Switch as a core feature (#6140)Drashna Jaelre
* Add Dip Switches as a core feature * Add documentation for Dip Switch feature * Update Preonic Rev3 to use new feature and remove custom matrix * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Remove custom matrix line completely Rather than just disabling it Co-Authored-By: fauxpark <fauxpark@gmail.com> * DIP changes Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use better check for DIP Switch configuration * Add to show features * Add bitmask callback for dip switch * Fix OLKB Boards dip switch config * Update docs to include bitmask example * Fix comments/documentation Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix issues with docs and use example from @tuzonghua * Fix wording Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix example to use proper formatting Bad, BAAAAAAD drashna!!! * Handle dip switch initialization better
2019-08-30clang-format changesskullY
2019-08-21AVR GPIO macro defines more readable (#5937)Takeshi ISHII
* A little easier to read the definition of the GPIO control macro for AVR. No change in build result. * Changed to not use GNU statement expression extension. No change in build result. * Modified split_common/serial.c to use qmk_firmware standard GPIO control macro. No change in build result. * fix PE6 -> E6 * remove some space * add some comment to config_common.h * Changed split_common/serial.c to use a newer version of qmk_firmware standard GPIO control macro.
2019-08-21Additional changes for Layer State typedef compatibility (#5906)Drashna Jaelre
* Additional changes for Layer State typedef compatibility * Replace biton32 with get_highest_layer in docs * Change additional layer structure code * Fix uGFX reference issue * Remove dynamic_keymap check * Where did all these extra spaces come from Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-07-15Sendstring LUT improvements (#5727)fauxpark
* Align sendstring LUTs to 9 characters wide * Replace 0 with XXXXXXX * Use decimal 128 for LUT size * Align heading comments * Add ASCII table comments * Add missing AltGr LUTs and adjust keycode LUTs accordingly * Use pragma once * Correct a couple more keycodes * Capitalise "BÉPO" * Also clean up the default tables * Tidy up Belgian and Norman LUTs
2019-07-09Fix parentheses in macros, and in general clean up quantum.h (#5021)Konstantin Đorđević
* Fix up GPIO macros * Fix up send string macros `string` arguments must not be parenthesized * Fix up miscellaneous macros * Make indentation uniform (4 spaces) * Make #ifdef vs #if defined usage consistent * Reorder standard includes * Revert indentation changes as per review comments * Revert #if defined(__AVR__) → #ifdef __AVR__ change * Change 2 space indent to 4 spaces on a couple of lines * Replace include guard with #pragma once
2019-05-17Typedef'ed layer_state_t to uint32_t (#3637)Alex Ong
* Typedef'ed layer_state_t to uint32_t. This enables future work with layer_state_t to uint8_t for optimization purposes. * Removed accidental xeal60 commit * Revert to egyptian brackets, added sizeof(layer_state_t) so when layer_state_t is redefined it will automagically work. * Add additional typedefs * Add checks for setting layer state * Update tmk_core/common/action_layer.h Co-Authored-By: alex-ong <the.onga@gmail.com> * Revert commit.
2019-04-29Simple extended space cadet (#5277)XScorpion2
* Simplifying and Extending Space Cadet to work on Ctrl and Alt keys * PR Review feedback * Reverting back to keycodes
2019-04-22Fix #3566 use an hardware timer for software PWM stability (#3615)Brice Figureau
With my XD60, I noticed that when typing the backlight was flickering. The XD60 doesn't have the backlight wired to a hardware PWM pin. I assumed it was a timing issue in the matrix scan that made the PWM lit the LED a bit too longer. I verified it because the more keys that were pressed, the more lighting I observed. This patch makes the software PWM be called during CPU interruptions. It works almost like the hardware PWM, except instead of using the CPU waveform generation, the CPU will fire interruption when the LEDs need be turned on or off. Using the same timer system as for hardware PWM, when the counter will reach OCRxx (the current backlight level), an Output Compare match interrupt will be fired and we'll turn the LEDs off. When the counter reaches its maximum value, an overflow interrupt will be triggered in which we turn the LEDs on. This way we replicate the hardware backlight PWM duty cycle. This gives a better time stability of the PWM computation than pure software PWM, leading to a flicker free backlight. Since this is reusing the hardware PWM code, software PWM also supports backlight breathing. Note that if timer1 is used for audio, backlight will use timer3, and if timer3 is used for audio backlight will use timer1. If both timers are used for audio, then this feature is disabled and we revert to the matrix scan based PWM computation. Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-20OLED Driver FeatureRyan Caltabiano
2019-04-12Change table namesDrashna Jaelre
2019-04-12Clean up some of the codeDrashna Jaelre
2019-04-07Fixed tap/down/up handling in dynamic keymap macros (#5363)Drashna Jaelre
* Fixed tap/down/up handling in dynamic keymap macros * Added SS_TAP_CODE, SS_DOWN_CODE, SS_UP_CODE
2019-04-05Custom Tapping Term per key (#5009)Drashna Jaelre
* Add customizable tapping terms * Add Documentation * Fix function * Fixes * It's not a pointer * Add debugging output * Update documentation to be at least vaguely accurate * Use `get_tapping_term(tapping_key.event)` instead `e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress. However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use. In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h * Use variable tapping term value rather than define * Silly drashna - tapping_key.event, not event * add get_event_keycode() function * Fix typo Co-Authored-By: drashna <drashna@live.com> * Remove post_process_record_quantum since it's the wrong PR * Update quantum/quantum.c Co-Authored-By: drashna <drashna@live.com> * Better handle ifdef statement for permissive hold Since we can't be sure that tapping term is actually 500 * Update quantum.c comments based on feedback * Clean up get_tapping_term function Clean up function so that users don't need to call the event function, and instead only check the keycode * Add ability to run functionality on and off * Make ifdef's more compact
2019-03-30Added SS_TAP_CODE, SS_DOWN_CODE, SS_UP_CODEWilba6582
2019-03-12Next set of split_common changes (#4974)James Churchill
* Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
2019-02-16Haptic feedback generalized - DRV2605 and solenoids (#4939)ishtob
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards * Haptic feedback enhancements: on/off toggle working, feedback order working todo: -work on modes switching -get modes switching to save to eeprom * haptic enhancement - eeprom and modes added * Added set and get functions for haptic feedback * initial implementation of solenoids under haptic feedback * changed eeprom to 32 bits to reserve blocks for future features * start documentation of haptic feedback * change keycode per comment from reviewers * typo fixes * added eeprom for solenoid configs * added solenoid and docs * Add/fix default parameters configs, improve docs * more doc cleanup * add in solenoid buzz toggle, clean up doc * some fixes for error in compiling solenoid * fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c * fixes for avr side issues * update keymap * fix keymap compile error * fix bugs found during solenoid testing * set pin that is not powered during bootloader * added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-10fix the led_matrix.h naming conflictskullY
2019-02-10compiles, but long delay on startup and problemsskullY
2019-01-25move `#include "rgb.h"` from quantum.h to quantum.cmtei
I think `quantum.h` should contain only API declarations that `quantum.c` provides externally. `rgb.h` contains function weak definitions. This should not be in `quantum.h`.
2018-12-19Make `readPin` output a 0 or 1 when using AVR to match ChibiOS's version of ↵Danny Nguyen
`readPin`
2018-12-14Fix up tap_code functionality (#4609)Drashna Jaelre
* Add delay in Tap Code to avoid issues I think a few people have reporting issues with it working properly, and it may be a timing issue. The 'register_code' uses this sort of delay in some of the functions, and this is probably why. Adding the 100ms delay should hopefully fix any issues with it. * Make tap_code delay configurable * Update documentation * Bring tap_code16 inline with changes * Fix type for tap_code16 Bad copy-paste job * Just use the value check for the define * Clarify timing in docs Co-Authored-By: drashna <drashna@live.com> * Wordsmithing Co-Authored-By: drashna <drashna@live.com>
2018-12-12Add standard definitions for ALGR and KC_ALGR (#4389)Konstantin Đorđević
* Add standard ALGR defition, remove (re)definitions from language files * Use ALGR(kc) consistently in ALTGR(kc) aliases * Non-Nordic keymaps should not use NO_ALGR * Add standard KC_ALGR definition * Update docs with ALGR and KC_ALGR * Update SS_ALGR and ALGR_T aliases
2018-11-27Add tap_code16 function (#4362)Konstantin Đorđević
2018-11-02Add support for Atmega32A to pin declarations and universal matrix (#4015)Jack Humbert
* add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-10-27Add Bootmagic Lite to QMK (#4215)Drashna Jaelre
* Preliminary additon of bootmagic lite functionality * Cleanup code * Clean up bootmagic code * Add documentation and clean up code * Make 'lite' an option for BOOTMAGIC_ENABLE * Update Templates with note about Bootmagic Lite option * Detect Debounce variable * Make sure debounce is a non-zero number * Capitalize Bootmagic * Capitalize bootmagic * Update wording * Re-add EEPROM reset, by popular demand And add eeprom-less version to drashna userspace for his sanity * Fix spacing * Set BOOTMAGIC_ENABLE to use full/lite/off And default yes to "full" for compatibility * Add Bootmagic lite info to templates * Remove text from makefiles * Cleanup of makefile * mention yes in bootmagic docs * Wordsmitthing the docs * Fix white spaces * Readd default bootmagic setting, because it's necessary
2018-10-01Adds default value for TAPPING_TERM if Tap Dance is enabled (#2785)Drashna Jaelre
* Force require TAPPING_TERM if Tap Dance is enabled * Handle lack of TAPPING_TERM more gracefully
2018-09-28Update quantum matrix to support both AVR and Chibios ARM (#3968)yiancar
* Update quantum matrix to support both AVR and Chibios ARM - Addition of STM32 pin definitions - Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR) - Modified matrix.c to use the above functions * minor ifdef fix * Rename of functions and docs - Added documentation. - Renamed functions according to Jack's spec. * Massdrop fix * Update matrix.c * Update quantum.h * Update quantum.h * Update quantum.h * Update internals_gpio_control.md
2018-09-17Make `PREVENT_STUCK_MODIFIERS` the default (#3107)Joe Wasson
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-13rgblight.[ch] more configurable (#3582)Takeshi ISHII
* add temporary test code rgblight-macro-test1.[ch] * rgblight.h : mode auto numberring and auto generate mode name symbol No change in build result. * rgblight.c use RGBLIGHT_MODE_xxx symbols No change in build result. * quantum.c use RGBLIGHT_MODE_xxx symbols No change in build result. * fix build break. when RGB_MATRIX_ENABLE defined * add temporary test code rgblight-macro-test2.[ch] * modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper() * modify rgblight_task() * configurable each effect compile on/off in config.h * update docs/feature_rgblight.md * fix conflict. docs/feature_rgblight.md * remove temporary test code rgblight-macro-test*.[ch] * fix comment typo. * remove old mode number from comment * update docs/feature_rgblight.md about effect mode * Revert "update docs/feature_rgblight.md about effect mode" This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d. * some change docs/feature_rgblight.md * fix typo * docs/feature_rgblight.md update: revise mode number table
2018-08-28ISSI31FL3733 driver (#3679)yiancar
* ISSI31FL3733 driver - Addapted IS31 driver for the above driver * fix my branch * ISSI31FL3733 driver - Inclusion of above ISSI led driver * IS31fl3733 driver - Added correct function for control registers * Finalized support for ISSI31fl3733 led driver - Finalized and tested driver. - Modified i2c_master for arm due to declaration mistake. - Fixed spaces/tabs in quantum.h file. - Fixed spaces/tabs in common_features.mk file. - Removed unnecessary includes from rgb_matrix.c file. - Added local definitions for MIN and MAX macros in rgb_matrix.c file. - Adjusted chevron effect. - Added necessary define (RGB_3733_MATRIX_ENABLE) for makefile. - Added necessary C define (ISSI3733) to aid with inclusion of the correct header file. - Added documentation for the new driver. * Driver structure update - Changed rule includes to be more condensed (RGB_MATRIX_ENABLE = IS31FL3731) and (RGB_MATRIX_ENABLE = IS31FL3733) - Updated documentation - Reverted to the use of differently named functions for each driver and selecting the needed ones within rgb_matrix.c * ISSI Drivers refractoring - Moved issi drivers in a dedicated folder - Updated documentation * I2C library fix I released the special pins incorrectly before. It is now fixed.
2018-08-04Make sure Planck light calls user suspend functions (#3568)Drashna Jaelre
* Make sure Planck light calls user suspend functions * Add suspend.h include to quantum.h for kb/user function compatibility
2018-07-25Keymap: Bocaj Ergodox Updates (#3364)Jacob Jerrell
* Bocaj Layout Revamp * Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory * Revert "Pull in Upstream (#1)" This reverts commit eeba0cec17ccb636e4225eed88aeae72b99f5e45. * Updates to Bocaj Files - Gave up on Tap Dance for ' -> ' + Added another 'Secret' + Add ' -> ' to the Swap Hands key + Add Swap Hands to the ' -> ' key + Made Hand Swapping a momentary toggle - Removed Auto Shift + Added Layer Toggle to KC_QUOTE for the _TOOLS layer - Disabled Tap Dance * Merge remote-tracking branch 'upstream/master' * Updates to Bocaj Added Game Layers, Removed Unused Macros * Removed 'secrets.h' * Updates to Bocaj Remove 'secrets'. Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues * Total revisioning of keymap and layout structure * Missed readme.md file * Bocaj - Permissive Hold setting enabled
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 04:10:57 +0000