summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-20format code according to conventions [skip ci]QMK Bot
2020-06-20Fix incorrect delay when setting WS2812 (and similar) leds (#9302)Joshua Diamond
* Fix incorrect delay when setting WS2812 (and similar) leds * Add documentation for WS2812_DELAY_MICROSECONDS * Remove improper cast to uint8_t Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * Remove unneeded cast to uint8_t and correct math Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * microseconds -> µs Co-authored-by: Ryan <fauxpark@gmail.com> * Make documentation better match the spec sheet. Co-authored-by: Ryan <fauxpark@gmail.com> * Rename macro to match spec sheet * Further correction to the delay maths for the SPI case. Co-authored-by: Joel Challis <git@zvecr.com> * Move ws2812_common.h to the drivers directory * Revert "Further correction to the delay maths for the SPI case." This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0. * Remove ws2812_setleds_pin(); consolidate ws2812.h Co-authored-by: Sergey Vlasov <sigprof@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-06-20STM32 WS2812 Open Drain Configuration (#9414)Xelus22
* update docs stm32 only and applies to all 3 driver * cformat
2020-06-10adds support for the atmega328 (#9043)itsnoteasy
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-05-27ISSI driver compile error fix (#9169)Wilba
2020-05-25Fix capitalisation of "GitHub" (#9184)Ryan
2020-05-24Fix i2c EEPROM compile issue when Console is enabled (#9186)Drashna Jaelre
* Fix i2c EEPROM compile issue when Console is enabled * Only use if both console and debugging is enabled
2020-05-24Fix SPI EEPROM compile issue when Console is enabled (#9193)Drashna Jaelre
2020-05-21Initial arm serial partially based on old lets split codezvecr
2020-05-21ARM split - Add uart half duplex transport support (#7987)Joel Challis
* ARM split - Add uart half duplex transport support * Fix for f103 * initial full duplex pass * partially remove full duplex * Correct speeds within driver docs Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-05-19Add SPI 25xx EEPROM support. (#8780)Nick Brassel
2020-05-10Fix off by one error with oled_write_raw_P (#9045)Brian Mock
2020-04-30QMK-ify some GPIO macros (#8315)Ryan
2020-04-29Add SPI master for ChibiOS/ARM. (#8779)Nick Brassel
2020-04-13Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. ↵Nick Brassel
(#8775)
2020-04-08format code according to conventions [skip ci]QMK Bot
2020-04-08spi_master for AVR (#8299)Ryan
* Change _delay_ms/us() to wait_ms/us() * Switch to platform-agnostic GPIO macros * Add AVR spi_master and migrate Adafruit BLE code * Set verbose back to false * Add clock divisor, bit order and SPI mode configuration for init * Add start and stop functions * Move configuration of mode, endianness and speed to `spi_start()` * Some breaks here would be good * Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4) * Remove mode and divisor enums * Add some docs * No hr at EOF * Add links in sidebar
2020-04-02Fix AVR ws2812 when ADDRESS_BASE is non zero (#8646)Joel Challis
* Fix AVR ws2812 when ADDRESS_BASE is non zero * fix port * remove unused function defs
2020-03-28fixed problem with implicit declaration in quantum/rgblight.c (#8406)Casper Weiss Bang
* Update tmk_core/common/progmem.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/rgblight.c Co-Authored-By: Ryan <fauxpark@gmail.com> * fixed problem with implicit declaration in quantum/rgblight.c (#8381) Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-21Initial arm->chibios pass - simplify some platform logic (#8450)Joel Challis
2020-03-17format code according to conventions [skip ci]QMK Bot
2020-03-17ARM - ADC cleanup (#8385)Joel Challis
* Update switch to array to allow custom values * Add adc keymap * update docs to reflect alignment of default 10 bit * start conversion to USE_ADCVn * samplerate is hella wrong...stub out for now * basic f1 and f4 functionality * Tidy up current changes * Restore old pinToMux function * Add back sample rate for supported platforms * F0 compile fixes * wordsmithery Co-Authored-By: Ryan <fauxpark@gmail.com> * Remove reference to avr only function Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-14format code according to conventions [skip ci]QMK Bot
2020-03-14Adding OLED scroll setup functions (#8386)brickbots
* Adding scroll setup functions: * Clarifying values stored in oled_scroll_speed
2020-03-14Remove pro_micro.h (#8374)Ryan
* Remove pro_micro.h * Include quantum.h
2020-03-12Add support for STM32L0/L1 onboard EEPROM. (#8002)Nick Brassel
* Add support for STM32L0/L1 onboard EEPROM. * Update docs/eeprom_driver.md Co-Authored-By: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-11format code according to conventions [skip ci]QMK Bot
2020-03-11Add ADC support for STM32F3 and STM32F0 devices (#7681)Drew Mills
* Add ADC support for STM32F3 and STM32F0 devices * Add section about configration options available to the ARM ADC implementation * Fix STM32 typo
2020-03-07format code according to conventions [skip ci]QMK Bot
2020-03-07Buffer based OLED panning, write byte to buffer at arbitrary index (#8055)brickbots
* Add buffer based single line pan, arbitrary byte write to buffer * Change dirty mask to inverse of OLED_BLOCK_TYPE for future proofing larger buffer sizes * Updating docs to include new functions * Updating to clarify scroll vs pan
2020-03-06format code according to conventions [skip ci]QMK Bot
2020-03-06Add f401 and f411 blackpill examples (#7930)Joel Challis
* Add f401 and f411 blackpill examples * Add readme files * Align dfu args with core * Add support for RESET keycode * move STM32_BOOTLOADER_ADDRESS to rules * Update conf files to latest ChibiOS * Update conf files to latest ChibiOS
2020-03-01Clean up includes for glcdfont headers (#7745)Ryan
* Clean up includes for glcdfont headers * Remove pragma once, most of these are not headers * Missed these
2020-03-01PWM DMA based RGB Underglow for STM32 (#7928)Joel Challis
* Add pwm ws2812 driver * Add docs for pwm ws2812 driver * Update ws2812_pwm for ChibiOS 19 Co-Authored-By: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-03-01Allow for ChibiOS 20.x (master), as well as enabling ChibiOS-Contrib HAL. ↵Nick Brassel
(#8272)
2020-02-292020 February 29 Breaking Changes Update (#8064)James Young
2020-02-24Rollback PR #7967 in preference of fixing I2C start/stop properly, in a ↵Nick Brassel
followup PR. (#8173)
2020-02-22format code according to conventions [skip ci]QMK Bot
2020-02-22Fix QWIIC OLED for AVR (#7769)Nick Winans
* Fix QWIIC OLED for AVR * Change missed width * width to width * height * Fix typo in comment Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix last incorrect uses of LCDWIDTH Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-13format code according to conventions [skip ci]QMK Bot
2020-02-13Fix RESET keycode on some STM32F072 keyboards (#8134)Joel Challis
* Add f072 board files with 'enter_bootloader_mode_if_requested' support * rename default f072 board file to GENERIC_STM32_F072XB * Remove board files * Add bootloader def * Update generic f072 board paths * Revert wrong deletion
2020-02-11Fix out of bound OLED font access (#8145)Ted M Lin
* Fix out of bound OLED font access The default font is 1344 bytes, or a total of 224 glyphs (each 6-bytes wide). OLED_FONT_END defaults to 224, which if used will then index off the end of the font array. So either the documentation or code is wrong. Instead of figuring out the rewording of the documentation, just change the OLED_FONT_END default value to 223, to match the documentation and code. * Add static assert to check array size Build bomb if the font array size doesn't match to the defines.
2020-02-01Add thread safety around i2c_master for ChibiOS/ARM.Nick Brassel
2020-01-27Refactor stm32duino f103 keyboards to use new central board config files (#7706)Joel Challis
* Create central board for bluepill * Remove duplicate board files * Refactor to use new central board config files * Fix cannonkeys f103 boards
2020-01-27Migrate common ld scripts to common location (#7887)Joel Challis
* Migrate common ld scripts to common location * Remove duplicate ld scripts * Update build to look at common ld location
2020-01-26Create central board for bluepillzvecr
2020-01-24Update split serial code to use driver pattern (#7990)Joel Challis
* Move avr serial code to drivers * Update src+= serial.c to driver pattern
2020-01-24format code according to conventions [skip ci]QMK Bot
2020-01-24Add customisable EEPROM driver selection (#7274)Nick Brassel
- uprintf -> dprintf - Fix atsam "vendor" eeprom. - Bump Kinetis K20x to 64 bytes, too. - Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value. - Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage. - Add 24LC128 by request.
2020-01-19Run clang-format manually to fix recently changed files (#7934)Joel Challis
* Run clang-format manually to fix recently changed files * Run clang-format manually to fix recently changed files - revert template files * Run clang-format manually to fix recently changed files - format off for ascii_to_keycode_lut
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 04:43:09 +0000