| Age | Commit message (Collapse) | Author |
|---|
|
Co-authored-by: Thomas Baart <thomas@splitkb.com>
Co-authored-by: Joel Challis <git@zvecr.com>
|
|
|
|
* Initial attempt at allowing keyboards to indicate what features they do not support
* try to use a for loop instead
* Update disable_features.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add a few more features
* remove my test fixture
* disable things that make all:all suggested"
Co-authored-by: Zach White <skullydazed@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
|
|
|
|
* new repo: create cmm.studio folder, add saka qmk firmware
new folder for cmm.studio line up keyboard
added saka68 keyboard qmk and via firmware support
* Update keyboards/cmm.studio/saka68/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix on keymap, readme
fix on keymap, readme
* Update keyboards/cmm.studio/saka68/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/cmm.studio/saka68/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* update vendor name with _ instead of .
update vendor name with _ instead of .
* Update readme.md
change the make format
* Update keyboards/cmm_studio/saka68/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* deleted some files from cmm.studio, changes to cmm_studio
deleted some files from cmm.studio, changes to cmm_studio
* Update readme.md
make command changed
* Update keyboards/cmm_studio/saka68/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
added pic for pcb
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/cmm_studio/saka68/config.h
tested and does work now. deleting these lines
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/cmm_studio/saka68/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
added use physical reset button instruction
* change to the cmm saka folder
making the changes to cmm saka firmware
seperated solder version firmware and hotswap version firmware
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* change to the cmm saka hotswap folder
* add sam's sg81m keyboard
add sam's sg81m keyboard firmware
* Update keymap.c
* Update keymap.c
* update keymap
update default keymap and via keymap
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keyboards/sam/sg81m/sg81m.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update config.h
* Update config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
|
|
* Adding Gust Macro Board
* Removing some rules
* Changing some rules
Co-authored-by: Eithan Shavit <eithan@fb.com>
|
|
* Breeze Rev1
* Better bootmagic and reset
* typo
Co-authored-by: Eithan Shavit <eithan@fb.com>
|
|
* New symmetric stagger keyboard: Angel
* mac layout
* layout simplify
* Update keyboards/angel/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/angel/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/angel/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/angel/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/angel/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* tab lang switch
* move to handwired and fix build instructions.
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Update Japanese document.
* fix table format.
* fix heading
* Update translation
* Apply suggestions from code review
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Update docs/ja/feature_debounce_type.md
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Bump up comment tag
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
|
|
* Add rgblight_reset_from_eeprom()
* reset->reload
|
|
|
|
|
|
|
|
Co-authored-by: Swiftrax <swiftrax@gmail.com>
|
|
* First version of keymap
* cleaned up code, made some tweaks, added readme
* extended oled timeout
* resolved final issues, all features functional
* added some leader-key combos
* added missing RGB keys to layout diagram
* removed lines for older elite-c v3
* make filename lowercase
* add old update interval
* fix spacing
|
|
* tushark54 base layers
* init summer keymap
* drafted new keymap layers
* added new keymap
* v2.0 mvp
* added bracket modes
* added oneshot left modifiers
* added HYPER layer
* added audio
* added audio and more
* changed layer order
* swapped SUPER and LCTL keys
* added more tunes
* added more audio
* added tunes
* major layer modifications
* major changes to keymaps
* minor changes
* added venv macro
* merge conflict
* v3 mvp
* moved DEL to hyper layer and PANIC+ALT
* fn keys on hyper, macros on lower ii
* dynamic macros and audio options
* minor audio improvements
* osl timeouts
* manually added .vscode directory
* fixed upstream file
* fixed upstream file
* base and hyper layer changes
* modified tapping term
* added more macros
* added GPL2+ compatible license headers
* removed songs
* updated licenses
* added chmod macro
|
|
* Initial support for Durgod K320 with BootMagic Lite
- Adding missing files
- Add Unicode Map Support & new user keymap
- Remove personalized features from Default keymap
- Added Unicode Map to both Default and kuenhlee keymap.c
- Updated readme.md
- Added additional Fn Shortcut keys
* Additional support for Durgod K320
- Simplifying default keymap
- Renaming durgod_k320 => durgod/k320
- Removing copy of ST_NUCLEO64_F070RB from K320. Replacing with local board.h
- Adding Mac keyboard layout for K320 as alternative via Fn+F12
- Implementing Windows Key lock on K320
- Cleaning up duplicated core functionality
- Adding default_toggle_mac_windows keymap with:
- Ability to toggle between Windows and MacOS layout
- Mac Media Lock functionality.
* Updating K320 keymap readme
Co-authored-by: kuenhlee <eos.camera.lee@gmail.com>
|
|
* Update default VIA layout option
* Add Quefrency Rev. 3
* Update readme
* Add GPL2 headers
* Update keyboards/keebio/quefrency/rev3/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Knobgoblin keyboard initial commit
New macropad initial commit. Keyboard and keymap
* corrected bracket and layout name
* attempting info file fix again
* info file line 33 hanging comma fix
* Update keyboards/knobgoblin/config.h
per fauxpark review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/knobgoblin/readme.md
per fauxpark review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/knobgoblin/readme.md
per fauxpark review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
The LED anodes of the pockettype are connected to the bus voltage when a
pro micro is used, but other controllers like the Elite-C (v4) connect this
pin to GPIO B0. This means that LEDs do not work by default for those
controllers.
This commit implements a fix for that by setting the B0 pin high.
|
|
|
|
* Add RGB Matrix support for Mark 65 keyboard
* Update drive LED count
* Removed unnecessary define line
* Corrected typo
Co-authored-by: filterpaper <filterpaper@localhost>
|
|
|
|
|
|
|
|
Co-authored-by: BuildTools <unconfigured@null.spigotmc.org>
|
|
* Update LEDの物理的接続とQMKのソフト的接続を調整し、左→アンダーグロー→右と繋がるようにした。
* Update レイヤーインジケータ関連変数を、#ifdefブロック内へ移動。
* Update コード整形
* Revert "Update コード整形"
This reverts commit c98483d9a0b41f8939a01b677cdcd18a8af34f78.
* Update 未使用のキーコード、S_SLSHに関連するコードを削除。
* Update コード整形
* Update キーごとのTappingTerm設定を使用しなくなったため、削除。
* Update 未使用コード削除。
* Update コメント追加
* Update レイヤーとIMEのON/OFFを同じキーに割り当てるのをやめたため、関連コードを削除。
* Update コメント追加
* Update コメント
* Update 誤読を避けるため、ifブロックの表記を括弧を使用したものへ変更。動作に変化なし。
* Update 未使用のため削除。
* Update LED関連でデフォルトレイヤーを格納して使用しないため、削除。
* Update コメント
* Update レイヤーによってロータリーエンコーダの動作を変える機能を追加。
* Update comment
* Update 実態に合わせて修正。
* Update JP用キーコードへの書き換え忘れを修正。
* New v.0.3.1 JP style
* Update v.0.3のJPスタイルではオーディオサポートなし。
* Update to latest information
* New
* New keyboard "stmeishi"
* Update layout name
* Update move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Add "LAYOUT_all" for multiple layout.
* Update target to latest "v.0.3.1".
* Remove unused item.
* Update comments.
* Update Rotary Encoder pins to actual used count.
* Update increase value to maximum.
* Update comments.
* Change default Effects.
* Remove unused items.
* Update comment.
* Change: Use define and function insted of real value for wait.
* Update copyrght.
* Update Update: Add "LAYOUT_all" for multiple layout.
* New: Place info.json copied from v.0.3.1.
* Remove unused items.
* Update: Add comma at last element.
* Update comments.
* Update: change if block style.
* Update: Change Japanese comments to English.
* Update: Change layout name.
* Update: Change layout name.
* Update: Fix miss numbering for ANSI layout.
* Update: Move "Tap Dance" rule to keymap's rule.
* New: Add default keymap.
* Delete: Moving files to branch.
* Initial: Add files from local.
* Remove local only unused keymaps.
* Update: Remove unused, comment outed codes.
* Add default keymap for v.0.3.
* Update: Add custom keycodes.
* Update: Change layer handling from process_record_user to layer_state_set_user.
* Update comment.
* Update: Remove unused function.
* Add my ErgoDash settings.
* Add my NumAtreus_Plus8 settings.
* Add my test_k15r2 settings.
* New Colice片手分動作確認済み
* Update スプリットキーボード対応
* Update 反応が悪くずっと二度押ししているので、ESCキーをレイヤーキーとの共用から、単独機能に変更。
* Update 右手スイッチ配置変更。インジケータLED対応。
* Change インジケータLEDが眩しいので、明るさを下げた。
* Change 右手親指のキーマップ変更。
* Change NumLockの誤爆防止のため、二度押しでレイヤートグルするようにした。
* Change 左手側、Bの右側のキーを誤爆することが多く日本語入力が途切れるため、レイヤーキーの機能左右で入れ替え。
* Update 右手側、画像ソフトなどで使うため、矢印キーの左をレイヤーキーからCTRLへ変更。
* New add new keyboard
* Update Duplex-Matrixが動作した初版
* New Duplex-Matrixのサンプルコード by e3w2q を最新のQMKファームウェアで動作するよう一部修正したもの。
* update Comment-out debug print code.
* Update Colice V0.2 キープレートで矢印キー付近の物理配列が変わったことへ対応
* Update キーレイアウト
* New Initial commit
* Update Fix migrate errors from test_duplex_dp to test_col2col
* Remove unnecessary files
* Testing
* Update IKeJIさんの方法（とりあえずCOL2COLと呼ぶ）の動作テストOK
* New 2乗マトリクス配線のキーボードを追加
* Update キーレイアウト調整
* New colice_rr 初回コミット。基本動作確認OK。LED不調。
* Update Eable LED, Reduce firmwre size
* Update colice_rr キーマップ調整。
* Update colice_rr ロータリーエンコーダ機能追加。
* Move colice_rr を colice_rr_split へ移動。
* Update colice_rr_splitフォルダへ移動したことに対応。
* New colice_rr_splitの初回コミット。
* Update キーマップ調整
* Update キーマップ調整
* New initial comit
* Update 意図せずカッコを入力することがるため、LSPO、RSPCの使用を中止。
* Change Fnキー押下時の日本語入力ONを、長押し時にキャンセルするように変更。
* Change LED点灯方法変更。
* Change 基板バージョンごとにサブフォルダを作成するようにした。
* Update Windows用レイヤーを追加
* Update LED設定を調整
* New Jones v.0.2を新規追加
* Update Numレイヤー追加。キーマップ調整。レイヤーインジケータLED調整。
* Update 左手Yをやめる
* Update ESCによるNumレイヤートグルを、ESC連打でトグルするのを防止するため、ダブルタップからトリプルタップへ変更。
* Update readme
* Update QMKの標準に従うよう各ファイルの内容を変更。
* Update 長音（ー）を入力しやすくするため、レイヤー上でホームポジションに近い位置に配置。
* Update タップダンスの状態判別を、Single,Double,Triple,Holdの4つのステータスにまとめた。
* Update キーボードの電源が切れてもデフォルトレイヤーの状態を保存しておくため、MACとWINレイヤーへの変更はEEPROMへ書き込むようにした。
* Update 不要箇所削除
* Update キーマップをNarrowとWideで書き換えるのが不便なので、分割した。
* Update 最新のPCBに合わせ、デフォルトをv.0.2に変更。
* New v.0.3を新規追加
* Update キーマトリクスに後からJPを追加するため、ANSI用に表記変更。
* Update ANSI用のキーマップであることを明記。
* New JP用キーマップを新規追加。
* Update スイッチの物理的存在、Enter右側はキー1個、に合わせて、ANSIレイアウトを修正。
* New FA (Full Armor)用レイアウトを新規追加
* Update 物理的ロック付きのCAPSは使用しないため、無効化。
* Update ハードウェアのサポート対象にキープレートを追加。
* Update FAで使用するAudio、RotaryEncoderの機能追加。機能削減でファームウェアサイズ縮小。
* Update オーディオ機能にキークリックを追加。
* update FA用設定
* Update 右シフトにキー追加
* Update 変換キー調整
* New オーディを有効化。マウスキーはサイズ削減のため無効化。
* Update スイッチ配置ミス修正。
* Update ピン定義を、ロータリーエンコーダの回転方向に合わせた
* Update 2音同時発音用にピン定義を追加。
* Update ファームサイズに空きがあるので、クリッキー音をデフォルトで利用できるようにした。
* Update LED設定変更
* New 物理配列がJPで、中身はUS配列のキーマップを追加。
* Update 行と列が入り乱れたレイアウトのため、音階が正しくなるように、Music-Mode用のキーマップを定義。
* Change マイナーバージョンの表記に対応できるよう、DEVICE_VERの桁を1つ上げた。
* Update オルソ＋ロースタガであることがわかるように、キーボードの簡単な説明を変更。
* New v.0.3.1の初期コミット
* Update 左右で回転方向の判定が逆になるので、右手側を左手に合わせた。
* Update キーマップ調整
* Update LEDインジケータを、v.0.3系と同じ点灯方法（2個をベースレイヤ、1個をRAISEなど）に変更。
* Update RGBLIGHT明るさ調整、エフェクト追加。
* Update 未使用キー設定を削除。
* Update Shiftと組み合わせた/?キーの反応を良くするため、キーごとにTAPPING_TERMを指定できるようにした。
* Update LEDエフェクト追加
* Update keymap
* Update 未使用のものを削除
* Update LEDの物理的接続とQMKのソフト的接続を調整し、左→アンダーグロー→右と繋がるようにした。
* Update レイヤーインジケータ関連変数を、#ifdefブロック内へ移動。
* Update コード整形
* Revert "Update コード整形"
This reverts commit c98483d9a0b41f8939a01b677cdcd18a8af34f78.
* Update 未使用のキーコード、S_SLSHに関連するコードを削除。
* Update コード整形
* Update キーごとのTappingTerm設定を使用しなくなったため、削除。
* Update 未使用コード削除。
* Update コメント追加
* Update レイヤーとIMEのON/OFFを同じキーに割り当てるのをやめたため、関連コードを削除。
* Update コメント追加
* Update コメント
* Update 誤読を避けるため、ifブロックの表記を括弧を使用したものへ変更。動作に変化なし。
* Update 未使用のため削除。
* Update LED関連でデフォルトレイヤーを格納して使用しないため、削除。
* Update コメント
* Update レイヤーによってロータリーエンコーダの動作を変える機能を追加。
* Update comment
* Update 実態に合わせて修正。
* Update JP用キーコードへの書き換え忘れを修正。
* New v.0.3.1 JP style
* Update v.0.3のJPスタイルではオーディオサポートなし。
* Update to latest information
* New
* New keyboard "stmeishi"
* Update layout name
* Update move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Move common settings from keymap's "rules.mk" to keyboard's "rules.mk".
* Update: Add "LAYOUT_all" for multiple layout.
* Update target to latest "v.0.3.1".
* Remove unused item.
* Update comments.
* Update Rotary Encoder pins to actual used count.
* Update increase value to maximum.
* Update comments.
* Change default Effects.
* Remove unused items.
* Update comment.
* Change: Use define and function insted of real value for wait.
* Update copyrght.
* Update Update: Add "LAYOUT_all" for multiple layout.
* New: Place info.json copied from v.0.3.1.
* Remove unused items.
* Update: Add comma at last element.
* Update comments.
* Update: change if block style.
* Update: Change Japanese comments to English.
* Update: Change layout name.
* Update: Change layout name.
* Update: Fix miss numbering for ANSI layout.
* Update: Move "Tap Dance" rule to keymap's rule.
* New: Add default keymap.
* Delete: Moving files to branch.
* Initial: Add files from local.
* Remove local only unused keymaps.
* Update: Remove unused, comment outed codes.
* Add default keymap for v.0.3.
* Update: Add custom keycodes.
* Update: Change layer handling from process_record_user to layer_state_set_user.
* Update comment.
* Update: Remove unused function.
* Revert "Remove: Non related files."
This reverts commit 82306568fad408427c757de832025dee91ca5a7f.
* Update: To resolve "submodule path not found" message.
* RemoRemove: Non related files.
* Revert file before miss comit.
* Update: Remove unused keycode.
* Update: レイアウト設定内のNUMレイヤへのトグルを、カスタムキーコード表記に変更。
* Update: Comment
* Update: Remove unused items.
* Update layout settings.
* Update: For simplicity, change toggle ADJUST layer method from process_record_user() to layer_state_set_user().
* Update: comment and styling.
* Update: Remove unused custom keycodes.
* Update: For simplicity, change toggle layer method from process_record_user() to layer_state_set_user().
* Update: Remove unused items.
* Update: comment and styling.
* Update: Correct comment.
* Update description and flashing example.
* Update: Remove comment-outed bootloaders.
* Update comments.
* Update: Correct LED count, without under-glow.
* Update: Chenged to common values with v.0.3.1.
* Update: Changed to common values with v.0.3.
* Updarte: Remove unused layout.
* Update: Change default layout to "ALL".
* Update comment.
* Update comment.
* Add missing file.
* Update: Change build option definition style.
* Update: Change build option definition style.
* Update: Change CUSTOM_MATRIX to "lite" and convert "matrix.c" to "lite" version.
* Update: Move "music_map" to keyboard's c file.
To provide common definition for other keymap creator.
* Update: Change keyboard name "v.0.3.1" ---> "v03_1".
For human readability, version name "v.0.3.1" remains at title on "readme.md".
* Update: Change keyboard name "v.0.3" ---> "v03".
For human readability, version name "v.0.3" remains at title on "readme.md".
* Update: Correct matrix definition at "k92".
* Apply suggestions from code review
Remove unnecessary comment block.
* Apply suggestions from code review
Remove "Optional" deprecated items.
* Apply suggestions from code review
Change "make" target keymap to standard default.
* Apply suggestions from code review
Remove rules for MIDI_ENABLE, FAUXCLICKY_ENABLE and HD44780_ENABLE.
These features are not enabled.
* Apply suggestions from code review
Convert tabs to spaces.
* Update: Change #define ROW_SHIFTER to keyboard specific.
|
|
* Add planck layout
* switch gaming toggle to TG
* rename readme
|
|
|
|
* [Apple M5120] First iteration
* Cleaned apple_m5120 files
* Changes requested by PR
* Update keyboards/apple_m5120/iso/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/apple_m5120/iso/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated Preonic default layout doc
* Removed non related files
Co-authored-by: dbroqua <dbroqua@mousur.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
|
|
Corrected macro in Scroll Button example so it compiles.
|
|
* update docs/getting_started_make_guide.md
Added description of some targets, including those added with #11338.
* Added description of options added by #11324.
* update docs/getting_started_make_guide.md
* Added description of target.
* Update docs/getting_started_make_guide.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update docs/getting_started_make_guide.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/getting_started_make_guide.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add ':id=linux-udev-rules' to docs/faq_build.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Update config.h
* Update config.h
|
|
* initial commit Dawn keyboard
* fixing some matrix
* final tweaks to keymaps and info.json layout
* fix info.json missing delimiter
* missing elements in info.json layout, resolved through lint
* fixed missing link image in readme
* Update keyboards/mechstudio/dawn/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: David <david@tarpit.be>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Fix minor typo in "General FAQ"
"want to do brand it with QMK" -> "want to brand it with QMK"
* Reword some of "Debugging FAQ" & "Miscellaneous FAQ".
Mostly grammatical wording of some parts and missing capitalization
|
|
* Initial commit on new clean branch. Testing out functionality of oled and encoder for default features.
* Cleaned up the initial push and removed the fancy keymap until the extra features and functionality can be tested and made more user friendly.
* Cleaned up the readme some more, compiled and tested both default and via keymaps, and did another round of checks to prepare for starting the PR.
* Cleaning up the keymap to meet expected formatting in a couple places and also adding in the TAP_CODE_DELAY after newly encoutnered encoder issues and inconsistencies.
* Initial commit of branch specifically for implementing the more complicated fancy keymap as I expect the main PR to be approved first.
* testing bongo cat out
* Progress with intended OLED behavior. Needs to be cleaned up still.
* Cleaned up bongocat and added WPM display on it.
* Almost there. Need to rethink the layer checking in encoder.
* Fixing all the merge issues I didn't check before doing the last commit. Learn from my mistakes, check your commits.
* Fixed and updated fancy firmware and bongocat firmware.
* Updating license year since I will be doing a PR anyway.
* Update keyboards/mechwild/mercutio/keymaps/fancy/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
|
|
* split config.h for each variant
* split rules.mk for each variant
* split source and header files for each variant
* move keymaps to the appropriate variant
* update keyboard readme
* update keymap readmes
* differentiate Staggered and Ortho USB Device Strings
* clean up formatting in info.json
* split info.json files for each variant
* break up the info.json for readability
* correct key positioning and board dimensions
* correct key object sequences
* add weak encoder function to keyboard level
Allows Configurator-compiled firmware to have encoder functionality.
* add variant-specific readme files and bootloader instructions
|
|
* Move Backslash/ISO Hash key to home row for Uni660 rev2 ISO
* update readme formatting
|
|
|
|
* QMK Configurator layout support for Pinky
3-row and 4-row versions
* refactor default keymaps
- use an enum for layer names
- remove redundant definitions
- qmk cformat pass
- modify pinky/4 via keymap to mirror pinky/4 default functionality
* remove LAYOUT_kc macros
This usage is not endorsed by QMK as it has been found to be confusing to novice users.
* add VIA support to pinky/3
* update config.h files
Removes unnecessary definitions for Backlight, RGB Underglow, Magic config and MIDI.
* update main rules.mk file
Updates the rules.mk file to match the formatting of the current QMK-provided template. Removes sample bootloader comments, feature rules that are no longer included in the template, and updates the in-line comments.
* update and split keyboard readme
Updates the main readme file's formatting, adds instructions to access bootloader mode, and adds more specific readmes for each version.
* add line breaks between rows in the info.json files
* rename layout macros for Community Layout forward compatibility
The layouts of the Pinky3 and Pinky4 aren't currently Community Layouts, but support for them could be added with a rules.mk edit should the layouts be added to QMK.
|
|
Co-authored-by: Eithan Shavit <eithan@fb.com>
|
|
* Update other keyboards for rgb matrix changes
* Remove customized bootmagic code
* Fix corne layout compilation error
* Fix compiler errors with all keymaps
* Add Simple Visualizer for ergodox infinity
* Fix compile issue with Corne
* Fix keymap stuff
* Add alias for mouse layer
* Add Halmak Keyboard layout
* Updates for Kyria
* Add support for oled interval
* Change RGB stuff
[CHANGE] Fix coexistence issues
* Fix rgb_stuff
* Add custom ploopyco mouse keymap
* Decrease default dwell time
* Updates based on last breaking changes update
* Disable command on dactyl
* Update ergodox to use proper commands for rgb matrix indicators
* Update all rgb matrix indicator functions
* Update rules for dactyl-manuform
* Reduce wait time for mouse layer off event
* Add more info to logger
* Add wrappers for get_tapping term
* Move version.h include into only file that actually needs it
* Update rgb sleep stuff
* Update key print function
* Change DM keymap settings
* Change pin for DM Manuform
* Add Proton C stuff for Corne keymap
* more arm corne tinkering
* Even more arm stuff for corne
* Cleanup corne stuff
* redirect default keymap to drashna
because I am a very bad man
* change corne rgb priority
* Update tractyl manuform to not conflict
* Add more secret stuff
* more dactyl tweaks
* Add more options to split transport
* Changes of oled support
* Change split settings
* Improve keylogger formatting more
* tweak oled stuff
* Oled and such tweaks
* Reduce brightness due to leds
* Decrease brightness more
* Only run layer code if master
|
|
* info.json: human-friendly formatting
* info.json: update key object labels
Some of the characters in the original file don't play nicely with `qmk info -l` on Windows.
* info.json: correct key object order
|
|
|
|
|
|
* exclude 'helix/rev3_4rows' from CI
Since helix/rev3_4rows is almost the same as helix/rev3_5rows, there is no point in checking with travis-ci.
* include 'helix/pico/back' to CI
helix pico and helix rev2 are still available. I would like to check both by travis-ci, but here I will add a check only for helix pico.
|
|
|
|
* first pass
* firmware firmware?
* Split out debug + testing docs
* tidy up duplicate css
* Add extra info to debug example
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
|
