diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.h')
-rw-r--r-- | tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.h | 372 |
1 files changed, 0 insertions, 372 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.h b/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.h deleted file mode 100644 index 9c85112fb8..0000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Events.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2014. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief USB Event management definitions. - * \copydetails Group_Events - * - * \note This file should not be included directly. It is automatically included as needed by the USB driver - * dispatch header located in LUFA/Drivers/USB/USB.h. - */ - -/** \ingroup Group_USB - * \defgroup Group_Events USB Events - * \brief USB Event management definitions. - * - * This module contains macros and functions relating to the management of library events, which are small - * pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from - * multiple places in the user or library code, which may or may not be inside an ISR, thus each handler - * should be written to be as small and fast as possible to prevent possible problems. - * - * Events can be hooked by the user application by declaring a handler function with the same name and parameters - * listed here. If an event with no user-associated handler is fired within the library, it by default maps to an - * internal empty stub function. - * - * Each event must only have one associated event handler, but can be raised by multiple sources by calling the - * event handler function (with any required event parameters). - * - * @{ - */ - -#ifndef __USBEVENTS_H__ -#define __USBEVENTS_H__ - - /* Includes: */ - #include "../../../Common/Common.h" - #include "USBMode.h" - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_USB_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. - #endif - - /* Public Interface - May be used in end-application: */ - /* Pseudo-Functions for Doxygen: */ - #if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__) - /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role - * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires - * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect - * event has fired (if disconnected before the role change). - * - * \note This event only exists on microcontrollers that support dual role USB modes. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY tokens have been supplied - * to the compiler (see \ref Group_USBManagement documentation). - */ - void EVENT_USB_UIDChange(void); - - /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB - * interface is in host mode. - * - * \param[in] ErrorCode Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t. - * - * \note This event only exists on microcontrollers that supports USB host mode. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Host_HostError(const uint8_t ErrorCode); - - /** Event for USB device attachment. This event fires when a the USB interface is in host mode, and - * a USB device has been connected to the USB interface. This is interrupt driven, thus fires before - * the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB - * management task to reduce CPU consumption. - * - * \note This event only exists on microcontrollers that supports USB host mode. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - * - * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. - */ - void EVENT_USB_Host_DeviceAttached(void); - - /** Event for USB device removal. This event fires when a the USB interface is in host mode, and - * a USB device has been removed the USB interface whether or not it has been enumerated. This - * can be used to programmatically stop the USB management task to reduce CPU consumption. - * - * \note This event only exists on microcontrollers that supports USB host mode. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - * - * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. - */ - void EVENT_USB_Host_DeviceUnattached(void); - - /** Event for USB device enumeration failure. This event fires when a the USB interface is - * in host mode, and an attached USB device has failed to enumerate completely. - * - * \param[in] ErrorCode Error code indicating the failure reason, a value in - * \ref USB_Host_EnumerationErrorCodes_t. - * - * \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the - * ErrorCode parameter indicates a control error, this will give the error - * code returned by the \ref USB_Host_SendControlRequest() function. - * - * \note This event only exists on microcontrollers that supports USB host mode. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode); - - /** Event for USB device enumeration completion. This event fires when a the USB interface is - * in host mode and an attached USB device has been completely enumerated and is ready to be - * controlled by the user application. - * - * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around - * 1 second) when a transaction is waiting to be processed by the device will prevent break communications - * and cause the host to reset the USB bus. - * - * \note This event only exists on microcontrollers that supports USB host mode. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Host_DeviceEnumerationComplete(void); - - /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB - * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate - * millisecond timer source when the USB bus is not suspended while in host mode. - * - * This event is time-critical; it is run once per millisecond and thus long handlers will significantly - * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. - * - * \note This event is not normally active - it must be manually enabled and disabled via the - * \ref USB_Host_EnableSOFEvents() and \ref USB_Host_DisableSOFEvents() commands after enumeration of - * a USB device. - * \n\n - * - * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Host_StartOfFrame(void); - - /** Event for USB device connection. This event fires when the microcontroller is in USB Device mode - * and the device is connected to a USB host, beginning the enumeration process measured by a rising - * level on the microcontroller's VBUS sense pin. - * - * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around - * two seconds) will prevent the device from enumerating correctly. - * - * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers - * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. - * - * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available. - * this means that the current connection state is derived from the bus suspension and wake up events by default, - * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by - * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection - * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. - * \n\n - * - * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. - */ - void EVENT_USB_Device_Connect(void); - - /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is - * disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin. - * - * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers - * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. - * - * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. - * this means that the current connection state is derived from the bus suspension and wake up events by default, - * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by - * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection - * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. - * \n\n - * - * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. - */ - void EVENT_USB_Device_Disconnect(void); - - /** Event for control requests. This event fires when a the USB host issues a control request - * to the mandatory device control endpoint (of address 0). This may either be a standard - * request that the library may have a handler code for internally, or a class specific request - * issued to the device which must be handled appropriately. If a request is not processed in the - * user application via this event, it will be passed to the library for processing internally - * if a suitable handler exists. - * - * This event is time-critical; each packet within the request transaction must be acknowledged or - * sent within 50ms or the host will abort the transfer. - * - * The library internally handles all standard control requests with the exceptions of SYNC FRAME, - * SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left - * for the user to process via this event if desired. If not handled in the user application or by - * the library internally, unknown requests are automatically STALLed. - * - * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - * \n\n - * - * \note Requests should be handled in the same manner as described in the USB 2.0 Specification, - * or appropriate class specification. In all instances, the library has already read the - * request SETUP parameters into the \ref USB_ControlRequest structure which should then be used - * by the application to determine how to handle the issued request. - */ - void EVENT_USB_Device_ControlRequest(void); - - /** Event for USB configuration number changed. This event fires when a the USB host changes the - * selected configuration number while in device mode. This event should be hooked in device - * applications to create the endpoints and configure the device for the selected configuration. - * - * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around - * one second) will prevent the device from enumerating correctly. - * - * This event fires after the value of \ref USB_Device_ConfigurationNumber has been changed. - * - * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Device_ConfigurationChanged(void); - - /** Event for USB suspend. This event fires when a the USB host suspends the device by halting its - * transmission of Start Of Frame pulses to the device. This is generally hooked in order to move - * the device over to a low power state until the host wakes up the device. If the USB interface is - * enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the - * USB PLL before the event is fired to save power. - * - * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - * \n\n - * - * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities - * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see - * \ref EVENT_USB_Device_Disconnect. - * - * \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event. - */ - void EVENT_USB_Device_Suspend(void); - - /** Event for USB wake up. This event fires when a the USB interface is suspended while in device - * mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally - * hooked to pull the user application out of a low power state and back into normal operating - * mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library - * will automatically restart the USB PLL before the event is fired. - * - * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - * \n\n - * - * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities - * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see - * \ref EVENT_USB_Device_Disconnect. - * - * \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event. - */ - void EVENT_USB_Device_WakeUp(void); - - /** Event for USB interface reset. This event fires when the USB interface is in device mode, and - * a the USB host requests that the device reset its interface. This event fires after the control - * endpoint has been automatically configured by the library. - * - * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around - * two seconds) will prevent the device from enumerating correctly. - * - * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Device_Reset(void); - - /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB - * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate - * millisecond timer source when the USB bus is enumerated in device mode to a USB host. - * - * This event is time-critical; it is run once per millisecond and thus long handlers will significantly - * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. - * - * \pre This event is not normally active - it must be manually enabled and disabled via the - * \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration. - * \n\n - * - * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see - * \ref Group_USBManagement documentation). - */ - void EVENT_USB_Device_StartOfFrame(void); - #endif - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Function Prototypes: */ - #if defined(__INCLUDE_FROM_EVENTS_C) - void USB_Event_Stub(void) ATTR_CONST; - - #if defined(USB_CAN_BE_BOTH) - void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - #endif - - #if defined(USB_CAN_BE_HOST) - void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode) - ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Host_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - #endif - - #if defined(USB_CAN_BE_DEVICE) - void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_ControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); - #endif - #endif - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |