diff options
Diffstat (limited to 'quantum/pointing_device')
| -rw-r--r-- | quantum/pointing_device/pointing_device.c | 28 | ||||
| -rw-r--r-- | quantum/pointing_device/pointing_device.h | 11 | ||||
| -rw-r--r-- | quantum/pointing_device/pointing_device_auto_mouse.c | 384 | ||||
| -rw-r--r-- | quantum/pointing_device/pointing_device_auto_mouse.h | 87 | ||||
| -rw-r--r-- | quantum/pointing_device/pointing_device_drivers.c | 38 |
5 files changed, 528 insertions, 20 deletions
diff --git a/quantum/pointing_device/pointing_device.c b/quantum/pointing_device/pointing_device.c index 505a7a6ffd..75bb5f81fc 100644 --- a/quantum/pointing_device/pointing_device.c +++ b/quantum/pointing_device/pointing_device.c @@ -22,6 +22,7 @@ #ifdef MOUSEKEY_ENABLE # include "mousekey.h" #endif + #if (defined(POINTING_DEVICE_ROTATION_90) + defined(POINTING_DEVICE_ROTATION_180) + defined(POINTING_DEVICE_ROTATION_270)) > 1 # error More than one rotation selected. This is not supported. #endif @@ -144,7 +145,11 @@ __attribute__((weak)) void pointing_device_init(void) { { pointing_device_driver.init(); #ifdef POINTING_DEVICE_MOTION_PIN +# ifdef POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW setPinInputHigh(POINTING_DEVICE_MOTION_PIN); +# else + setPinInput(POINTING_DEVICE_MOTION_PIN); +# endif #endif } @@ -166,11 +171,9 @@ __attribute__((weak)) void pointing_device_send(void) { host_mouse_send(&local_mouse_report); } // send it and 0 it out except for buttons, so those stay until they are explicity over-ridden using update_pointing_device - local_mouse_report.x = 0; - local_mouse_report.y = 0; - local_mouse_report.v = 0; - local_mouse_report.h = 0; - + uint8_t buttons = local_mouse_report.buttons; + memset(&local_mouse_report, 0, sizeof(local_mouse_report)); + local_mouse_report.buttons = buttons; memcpy(&old_report, &local_mouse_report, sizeof(local_mouse_report)); } @@ -238,7 +241,11 @@ __attribute__((weak)) void pointing_device_task(void) { # if defined(SPLIT_POINTING_ENABLE) # error POINTING_DEVICE_MOTION_PIN not supported when sharing the pointing device report between sides. # endif +# ifdef POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW if (!readPin(POINTING_DEVICE_MOTION_PIN)) +# else + if (readPin(POINTING_DEVICE_MOTION_PIN)) +# endif #endif #if defined(SPLIT_POINTING_ENABLE) @@ -270,6 +277,10 @@ __attribute__((weak)) void pointing_device_task(void) { local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); local_mouse_report = pointing_device_task_kb(local_mouse_report); #endif + // automatic mouse layer function +#ifdef POINTING_DEVICE_AUTO_MOUSE_ENABLE + pointing_device_task_auto_mouse(local_mouse_report); +#endif // combine with mouse report to ensure that the combined is sent correctly #ifdef MOUSEKEY_ENABLE report_mouse_t mousekey_report = mousekey_get_report(); @@ -469,3 +480,10 @@ __attribute__((weak)) report_mouse_t pointing_device_task_combined_user(report_m return pointing_device_combine_reports(left_report, right_report); } #endif + +__attribute__((weak)) void pointing_device_keycode_handler(uint16_t keycode, bool pressed) { + if IS_MOUSEKEY_BUTTON (keycode) { + local_mouse_report.buttons = pointing_device_handle_buttons(local_mouse_report.buttons, pressed, keycode - KC_MS_BTN1); + pointing_device_send(); + } +} diff --git a/quantum/pointing_device/pointing_device.h b/quantum/pointing_device/pointing_device.h index 77db5471ea..d430e6cfa4 100644 --- a/quantum/pointing_device/pointing_device.h +++ b/quantum/pointing_device/pointing_device.h @@ -21,20 +21,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "host.h" #include "report.h" +#ifdef POINTING_DEVICE_AUTO_MOUSE_ENABLE +# include "pointing_device_auto_mouse.h" +#endif + #if defined(POINTING_DEVICE_DRIVER_adns5050) # include "drivers/sensors/adns5050.h" +# define POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW #elif defined(POINTING_DEVICE_DRIVER_adns9800) # include "spi_master.h" # include "drivers/sensors/adns9800.h" +# define POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW #elif defined(POINTING_DEVICE_DRIVER_analog_joystick) # include "analog.h" # include "drivers/sensors/analog_joystick.h" +# define POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW #elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c) || defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi) # include "drivers/sensors/cirque_pinnacle.h" # include "drivers/sensors/cirque_pinnacle_gestures.h" # include "pointing_device_gestures.h" #elif defined(POINTING_DEVICE_DRIVER_paw3204) # include "drivers/sensors/paw3204.h" +# define POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW #elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball) # include "i2c_master.h" # include "drivers/sensors/pimoroni_trackball.h" @@ -48,9 +56,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # ifdef PIMORONI_TRACKBALL_ROTATE # define POINTING_DEVICE_ROTATION_90 # endif +# define POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW #elif defined(POINTING_DEVICE_DRIVER_pmw3360) || defined(POINTING_DEVICE_DRIVER_pmw3389) # include "spi_master.h" # include "drivers/sensors/pmw33xx_common.h" +# define POINTING_DEVICE_MOTION_PIN_ACTIVE_LOW #else void pointing_device_driver_init(void); report_mouse_t pointing_device_driver_get_report(report_mouse_t mouse_report); @@ -100,6 +110,7 @@ report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report); report_mouse_t pointing_device_task_user(report_mouse_t mouse_report); uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button); report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report); +void pointing_device_keycode_handler(uint16_t keycode, bool pressed); #if defined(SPLIT_POINTING_ENABLE) void pointing_device_set_shared_report(report_mouse_t report); diff --git a/quantum/pointing_device/pointing_device_auto_mouse.c b/quantum/pointing_device/pointing_device_auto_mouse.c new file mode 100644 index 0000000000..edffd44787 --- /dev/null +++ b/quantum/pointing_device/pointing_device_auto_mouse.c @@ -0,0 +1,384 @@ +/* Copyright 2021 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> + * Copyright 2022 Alabastard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef POINTING_DEVICE_AUTO_MOUSE_ENABLE + +# include "pointing_device_auto_mouse.h" + +/* local data structure for tracking auto mouse */ +static auto_mouse_context_t auto_mouse_context = {.config.layer = (uint8_t)AUTO_MOUSE_DEFAULT_LAYER}; + +/* local functions */ +static bool is_mouse_record(uint16_t keycode, keyrecord_t* record); +static void auto_mouse_reset(void); + +/* check for target layer deactivation overrides */ +static inline bool layer_hold_check(void) { + return get_auto_mouse_toggle() || +# ifndef NO_ACTION_ONESHOT + get_oneshot_layer() == (AUTO_MOUSE_TARGET_LAYER) || +# endif + false; +} + +/* check all layer activation criteria */ +static inline bool is_auto_mouse_active(void) { + return auto_mouse_context.status.is_activated || auto_mouse_context.status.mouse_key_tracker || layer_hold_check(); +} + +/** + * @brief Get auto mouse enable state + * + * Return is_enabled value + * + * @return bool true: auto mouse enabled false: auto mouse disabled + */ +bool get_auto_mouse_enable(void) { + return auto_mouse_context.config.is_enabled; +} + +/** + * @brief get current target layer index + * + * NOTE: (AUTO_MOUSE_TARGET_LAYER) is an alias for this function + * + * @return uint8_t target layer index + */ +uint8_t get_auto_mouse_layer(void) { + return auto_mouse_context.config.layer; +} + +/** + * @brief get layer_toggled value + * + * @return bool of current layer_toggled state + */ +bool get_auto_mouse_toggle(void) { + return auto_mouse_context.status.is_toggled; +} + +/** + * @brief Reset auto mouse context + * + * Clear timers and status + * + * NOTE: this will set is_toggled to false so careful when using it + */ +static void auto_mouse_reset(void) { + memset(&auto_mouse_context.status, 0, sizeof(auto_mouse_context.status)); + memset(&auto_mouse_context.timer, 0, sizeof(auto_mouse_context.timer)); +} + +/** + * @brief Set auto mouse enable state + * + * Set local auto mouse enabled state + * + * @param[in] state bool + */ +void set_auto_mouse_enable(bool enable) { + // skip if unchanged + if (auto_mouse_context.config.is_enabled == enable) return; + auto_mouse_context.config.is_enabled = enable; + auto_mouse_reset(); +} + +/** + * @brief Change target layer for auto mouse + * + * Sets input as the new target layer if different from current and resets auto mouse + * + * NOTE: remove_auto_mouse_layer(state, false) or auto_mouse_layer_off should be called + * before this function to avoid issues with layers getting stuck + * + * @param[in] layer uint8_t + */ +void set_auto_mouse_layer(uint8_t layer) { + // skip if unchanged + if (auto_mouse_context.config.layer == layer) return; + auto_mouse_context.config.layer = layer; + auto_mouse_reset(); +} + +/** + * @brief toggle mouse layer setting + * + * Change state of local layer_toggled bool meant to track when the mouse layer is toggled on by other means + * + * NOTE: While is_toggled is true it will prevent deactiving target layer (but not activation) + */ +void auto_mouse_toggle(void) { + auto_mouse_context.status.is_toggled ^= 1; + auto_mouse_context.timer.delay = 0; +} + +/** + * @brief Remove current auto mouse target layer from layer state + * + * Will remove auto mouse target layer from given layer state if appropriate. + * + * NOTE: Removal can be forced, ignoring appropriate critera + * + * @params state[in] layer_state_t original layer state + * @params force[in] bool force removal + * + * @return layer_state_t modified layer state + */ +layer_state_t remove_auto_mouse_layer(layer_state_t state, bool force) { + if (force || ((AUTO_MOUSE_ENABLED) && !layer_hold_check())) { + state &= ~((layer_state_t)1 << (AUTO_MOUSE_TARGET_LAYER)); + } + return state; +} + +/** + * @brief Disable target layer + * + * Will disable target layer if appropriate. + * NOTE: NOT TO BE USED in layer_state_set stack!!! + */ +void auto_mouse_layer_off(void) { + if (layer_state_is((AUTO_MOUSE_TARGET_LAYER)) && (AUTO_MOUSE_ENABLED) && !layer_hold_check()) { + layer_off((AUTO_MOUSE_TARGET_LAYER)); + } +} + +/** + * @brief Weak function to handel testing if pointing_device is active + * + * Will trigger target layer activation(if delay timer has expired) and prevent deactivation when true. + * May be replaced by bool in report_mouse_t in future + * + * NOTE: defined weakly to allow for changing and adding conditions for specific hardware/customization + * + * @param[in] mouse_report report_mouse_t + * @return bool of pointing_device activation + */ +__attribute__((weak)) bool auto_mouse_activation(report_mouse_t mouse_report) { + return mouse_report.x != 0 || mouse_report.y != 0 || mouse_report.h != 0 || mouse_report.v != 0 || mouse_report.buttons; +} + +/** + * @brief Update the auto mouse based on mouse_report + * + * Handel activation/deactivation of target layer based on auto_mouse_activation and state timers and local key/layer tracking data + * + * @param[in] mouse_report report_mouse_t + */ +void pointing_device_task_auto_mouse(report_mouse_t mouse_report) { + // skip if disabled, delay timer running, or debounce + if (!(AUTO_MOUSE_ENABLED) || timer_elapsed(auto_mouse_context.timer.active) <= AUTO_MOUSE_DEBOUNCE || timer_elapsed(auto_mouse_context.timer.delay) <= AUTO_MOUSE_DELAY) { + return; + } + // update activation and reset debounce + auto_mouse_context.status.is_activated = auto_mouse_activation(mouse_report); + if (is_auto_mouse_active()) { + auto_mouse_context.timer.active = timer_read(); + auto_mouse_context.timer.delay = 0; + if (!layer_state_is((AUTO_MOUSE_TARGET_LAYER))) { + layer_on((AUTO_MOUSE_TARGET_LAYER)); + } + } else if (layer_state_is((AUTO_MOUSE_TARGET_LAYER)) && timer_elapsed(auto_mouse_context.timer.active) > AUTO_MOUSE_TIME) { + layer_off((AUTO_MOUSE_TARGET_LAYER)); + auto_mouse_context.timer.active = 0; + } +} + +/** + * @brief Handle mouskey event + * + * Increments/decrements mouse_key_tracker and restart active timer + * + * @param[in] pressed bool + */ +void auto_mouse_keyevent(bool pressed) { + if (pressed) { + auto_mouse_context.status.mouse_key_tracker++; + } else { + auto_mouse_context.status.mouse_key_tracker--; + } + auto_mouse_context.timer.delay = 0; +} + +/** + * @brief Handle auto mouse non mousekey reset + * + * Start/restart delay timer and reset auto mouse on keydown as well as turn the + * target layer off if on and reset toggle status + * + * NOTE: NOT TO BE USED in layer_state_set stack!!! + * + * @param[in] pressed bool + */ +void auto_mouse_reset_trigger(bool pressed) { + if (pressed) { + if (layer_state_is((AUTO_MOUSE_TARGET_LAYER))) { + layer_off((AUTO_MOUSE_TARGET_LAYER)); + }; + auto_mouse_reset(); + } + auto_mouse_context.timer.delay = timer_read(); +} + +/** + * @brief handle key events processing for auto mouse + * + * Will process keys differently depending on if key is defined as mousekey or not. + * Some keys have built in behaviour(not overwritable): + * mouse buttons : auto_mouse_keyevent() + * non-mouse keys : auto_mouse_reset_trigger() + * mod keys : skip auto mouse key processing + * mod tap : skip on hold (mod keys) + * QK mods e.g. LCTL(kc): default to non-mouse key, add at kb/user level as needed + * non target layer keys: skip auto mouse key processing (same as mod keys) + * MO(target layer) : auto_mouse_keyevent() + * target layer toggles : auto_mouse_toggle() (on both key up and keydown) + * target layer tap : default processing on tap mouse key on hold + * all other keycodes : default to non-mouse key, add at kb/user level as needed + * + * Will deactivate target layer once a non mouse key is pressed if nothing is holding the layer active + * such as held mousekey, toggled current target layer, or auto_mouse_activation is true + * + * @params keycode[in] uint16_t + * @params record[in] keyrecord_t pointer + */ +bool process_auto_mouse(uint16_t keycode, keyrecord_t* record) { + // skip if not enabled or mouse_layer not set + if (!(AUTO_MOUSE_ENABLED)) return true; + + switch (keycode) { + // Skip Mod keys to avoid layer reset + case KC_LEFT_CTRL ... KC_RIGHT_GUI: + case QK_MODS ... QK_MODS_MAX: + break; + // TO((AUTO_MOUSE_TARGET_LAYER))------------------------------------------------------------------------------- + case QK_TO ... QK_TO_MAX: // same proccessing as next + // TG((AUTO_MOUSE_TARGET_LAYER))------------------------------------------------------------------------------- + case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX: + if ((keycode & 0xff) == (AUTO_MOUSE_TARGET_LAYER)) { + if (!(record->event.pressed)) auto_mouse_toggle(); + } + break; + // MO((AUTO_MOUSE_TARGET_LAYER))------------------------------------------------------------------------------- + case QK_MOMENTARY ... QK_MOMENTARY_MAX: + if ((keycode & 0xff) == (AUTO_MOUSE_TARGET_LAYER)) { + auto_mouse_keyevent(record->event.pressed); + } + // DF --------------------------------------------------------------------------------------------------------- + case QK_DEF_LAYER ... QK_DEF_LAYER_MAX: +# ifndef NO_ACTION_ONESHOT + // OSL((AUTO_MOUSE_TARGET_LAYER))------------------------------------------------------------------------------ + case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX: + case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX: +# endif + break; + // LM((AUTO_MOUSE_TARGET_LAYER), mod)-------------------------------------------------------------------------- + case QK_LAYER_MOD ... QK_LAYER_MOD_MAX: + if (((keycode >> 8) & 0x0f) == (AUTO_MOUSE_TARGET_LAYER)) { + auto_mouse_keyevent(record->event.pressed); + } + break; + // TT((AUTO_MOUSE_TARGET_LAYER))--------------------------------------------------------------------------- +# ifndef NO_ACTION_TAPPING + case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX: + if ((keycode & 0xff) == (AUTO_MOUSE_TARGET_LAYER)) { + auto_mouse_keyevent(record->event.pressed); +# if TAPPING_TOGGLE != 0 + if (record->tap.count == TAPPING_TOGGLE) { + if (record->event.pressed) { + auto_mouse_context.status.mouse_key_tracker--; + } else { + auto_mouse_toggle(); + auto_mouse_context.status.mouse_key_tracker++; + } + } +# endif + } + break; + // LT((AUTO_MOUSE_TARGET_LAYER), kc)--------------------------------------------------------------------------- + case QK_LAYER_TAP ... QK_LAYER_TAP_MAX: + if (!record->tap.count) { + if (((keycode >> 8) & 0x0f) == (AUTO_MOUSE_TARGET_LAYER)) { + auto_mouse_keyevent(record->event.pressed); + } + break; + } + // MT(kc) only skip on hold + case QK_MOD_TAP ... QK_MOD_TAP_MAX: + if (!record->tap.count) break; +# endif + // QK_MODS goes to default + default: + // skip on no event + if (IS_NOEVENT(record->event)) break; + // check if keyrecord is mousekey + if (is_mouse_record(keycode, record)) { + auto_mouse_keyevent(record->event.pressed); + } else if (!is_auto_mouse_active()) { + // all non-mousekey presses restart delay timer and reset status + auto_mouse_reset_trigger(record->event.pressed); + } + } + if (auto_mouse_context.status.mouse_key_tracker < 0) { + auto_mouse_context.status.mouse_key_tracker = 0; + dprintf("key tracker error (<0) \n"); + } + return true; +} + +/** + * @brief Local function to handle checking if a keycode is a mouse button + * + * Starts code stack for checking keyrecord if defined as mousekey + * + * @params keycode[in] uint16_t + * @params record[in] keyrecord_t pointer + * @return bool true: keyrecord is mousekey false: keyrecord is not mousekey + */ +static bool is_mouse_record(uint16_t keycode, keyrecord_t* record) { + // allow for keyboard to hook in and override if need be + if (is_mouse_record_kb(keycode, record) || IS_MOUSEKEY(keycode)) return true; + return false; +} + +/** + * @brief Weakly defined keyboard level callback for adding keyrecords as mouse keys + * + * Meant for redefinition at keyboard level and should return is_mouse_record_user by default at end of function + * + * @params keycode[in] uint16_t + * @params record[in] keyrecord_t pointer + * @return bool true: keyrecord is defined as mouse key false: keyrecord is not defined as mouse key + */ +__attribute__((weak)) bool is_mouse_record_kb(uint16_t keycode, keyrecord_t* record) { + return is_mouse_record_user(keycode, record); +} + +/** + * @brief Weakly defined keymap/user level callback for adding keyrecords as mouse keys + * + * Meant for redefinition at keymap/user level and should return false by default at end of function + * + * @params keycode[in] uint16_t + * @params record[in] keyrecord_t pointer + * @return bool true: keyrecord is defined as mouse key false: keyrecord is not defined as mouse key + */ +__attribute__((weak)) bool is_mouse_record_user(uint16_t keycode, keyrecord_t* record) { + return false; +} + +#endif // POINTING_DEVICE_AUTO_MOUSE_ENABLE diff --git a/quantum/pointing_device/pointing_device_auto_mouse.h b/quantum/pointing_device/pointing_device_auto_mouse.h new file mode 100644 index 0000000000..0f26af79e6 --- /dev/null +++ b/quantum/pointing_device/pointing_device_auto_mouse.h @@ -0,0 +1,87 @@ +/* Copyright 2022 Alabastard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <string.h> + +#include "quantum.h" +#include "pointing_device.h" +#include "print.h" + +/* check settings and set defaults */ +#ifndef POINTING_DEVICE_AUTO_MOUSE_ENABLE +# error "POINTING_DEVICE_AUTO_MOUSE_ENABLE not defined! check config settings" +#endif + +#ifndef AUTO_MOUSE_DEFAULT_LAYER +# define AUTO_MOUSE_DEFAULT_LAYER 1 +#endif +#ifndef AUTO_MOUSE_TIME +# define AUTO_MOUSE_TIME 650 +#endif +#ifndef AUTO_MOUSE_DELAY +# define AUTO_MOUSE_DELAY GET_TAPPING_TERM(KC_MS_BTN1, &(keyrecord_t){}) +#endif +#ifndef AUTO_MOUSE_DEBOUNCE +# define AUTO_MOUSE_DEBOUNCE 25 +#endif + +/* data structure */ +typedef struct { + struct { + bool is_enabled; + uint8_t layer; + } config; + struct { + uint16_t active; + uint16_t delay; + } timer; + struct { + bool is_activated; + bool is_toggled; + int8_t mouse_key_tracker; + } status; +} auto_mouse_context_t; + +/* ----------Set up and control------------------------------------------------------------------------------ */ +void set_auto_mouse_enable(bool enable); // enable/disable auto mouse feature +bool get_auto_mouse_enable(void); // get auto_mouse_enable +void set_auto_mouse_layer(uint8_t layer); // set target layer by index +uint8_t get_auto_mouse_layer(void); // get target layer index +void auto_mouse_layer_off(void); // disable target layer if appropriate (DO NOT USE in layer_state_set stack!!) +layer_state_t remove_auto_mouse_layer(layer_state_t state, bool force); // remove auto mouse target layer from state if appropriate (can be forced) + +/* ----------For custom pointing device activation----------------------------------------------------------- */ +bool auto_mouse_activation(report_mouse_t mouse_report); // handles pointing device trigger conditions for target layer activation (overwritable) + +/* ----------Handling keyevents------------------------------------------------------------------------------ */ +void auto_mouse_keyevent(bool pressed); // trigger auto mouse keyevent: mouse_keytracker increment/decrement on press/release +void auto_mouse_reset_trigger(bool pressed); // trigger non mouse keyevent: reset and start delay timer (DO NOT USE in layer_state_set stack!!) +void auto_mouse_toggle(void); // toggle mouse layer flag disables mouse layer deactivation while on (meant for tap toggle or toggle of target) +bool get_auto_mouse_toggle(void); // get toggle mouse layer flag value + +/* ----------Callbacks for adding keycodes to mouse record checking------------------------------------------ */ +bool is_mouse_record_kb(uint16_t keycode, keyrecord_t* record); +bool is_mouse_record_user(uint16_t keycode, keyrecord_t* record); + +/* ----------Core functions (only used in custom pointing devices or key processing)------------------------- */ +void pointing_device_task_auto_mouse(report_mouse_t mouse_report); // add to pointing_device_task_* +bool process_auto_mouse(uint16_t keycode, keyrecord_t* record); // add to process_record_* + +/* ----------Macros/Aliases---------------------------------------------------------------------------------- */ +#define AUTO_MOUSE_TARGET_LAYER get_auto_mouse_layer() +#define AUTO_MOUSE_ENABLED get_auto_mouse_enable() diff --git a/quantum/pointing_device/pointing_device_drivers.c b/quantum/pointing_device/pointing_device_drivers.c index b96f8ff4b3..172c9f36d7 100644 --- a/quantum/pointing_device/pointing_device_drivers.c +++ b/quantum/pointing_device/pointing_device_drivers.c @@ -17,6 +17,7 @@ */ #include "pointing_device.h" +#include "pointing_device_internal.h" #include "debug.h" #include "wait.h" #include "timer.h" @@ -32,10 +33,7 @@ report_mouse_t adns5050_get_report(report_mouse_t mouse_report) { report_adns5050_t data = adns5050_read_burst(); if (data.dx != 0 || data.dy != 0) { -# ifdef CONSOLE_ENABLE - if (debug_mouse) dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy); -# endif - + pd_dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy); mouse_report.x = (mouse_xy_report_t)data.dx; mouse_report.y = (mouse_xy_report_t)data.dy; } @@ -76,9 +74,7 @@ const pointing_device_driver_t pointing_device_driver = { report_mouse_t analog_joystick_get_report(report_mouse_t mouse_report) { report_analog_joystick_t data = analog_joystick_read(); -# ifdef CONSOLE_ENABLE - if (debug_mouse) dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y); -# endif + pd_dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y); mouse_report.x = data.x; mouse_report.y = data.y; @@ -117,12 +113,24 @@ void cirque_pinnacle_configure_cursor_glide(float trigger_px) { # endif # if CIRQUE_PINNACLE_POSITION_MODE + +# ifdef POINTING_DEVICE_AUTO_MOUSE_ENABLE +static bool is_touch_down; + +bool auto_mouse_activation(report_mouse_t mouse_report) { + return is_touch_down || mouse_report.x != 0 || mouse_report.y != 0 || mouse_report.h != 0 || mouse_report.v != 0 || mouse_report.buttons; +} +# endif + report_mouse_t cirque_pinnacle_get_report(report_mouse_t mouse_report) { pinnacle_data_t touchData = cirque_pinnacle_read_data(); mouse_xy_report_t report_x = 0, report_y = 0; static uint16_t x = 0, y = 0; +# if defined(CIRQUE_PINNACLE_TAP_ENABLE) + mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, false, POINTING_DEVICE_BUTTON1); +# endif # ifdef POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE - cursor_glide_t glide_report = {0}; + cursor_glide_t glide_report = {0}; if (cursor_glide_enable) { glide_report = cursor_glide_check(&glide); @@ -140,10 +148,12 @@ report_mouse_t cirque_pinnacle_get_report(report_mouse_t mouse_report) { return mouse_report; } -# if CONSOLE_ENABLE - if (debug_mouse && touchData.touchDown) { - dprintf("cirque_pinnacle touchData x=%4d y=%4d z=%2d\n", touchData.xValue, touchData.yValue, touchData.zValue); + if (touchData.touchDown) { + pd_dprintf("cirque_pinnacle touchData x=%4d y=%4d z=%2d\n", touchData.xValue, touchData.yValue, touchData.zValue); } + +# ifdef POINTING_DEVICE_AUTO_MOUSE_ENABLE + is_touch_down = touchData.touchDown; # endif // Scale coordinates to arbitrary X, Y resolution @@ -227,9 +237,7 @@ const pointing_device_driver_t pointing_device_driver = { report_mouse_t paw3204_get_report(report_mouse_t mouse_report) { report_paw3204_t data = paw3204_read(); if (data.isMotion) { -# ifdef CONSOLE_ENABLE - dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y); -# endif + pd_dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y); mouse_report.x = data.x; mouse_report.y = data.y; @@ -329,7 +337,7 @@ report_mouse_t pmw33xx_get_report(report_mouse_t mouse_report) { if (!in_motion) { in_motion = true; - dprintf("PWM3360 (0): starting motion\n"); + pd_dprintf("PWM3360 (0): starting motion\n"); } mouse_report.x = CONSTRAIN_HID_XY(report.delta_x); |