diff options
Diffstat (limited to 'platforms')
| -rw-r--r-- | platforms/arm_atsam/bootloader.mk | 46 | ||||
| -rw-r--r-- | platforms/avr/bootloader.mk | 144 | ||||
| -rw-r--r-- | platforms/avr/flash.mk | 4 | ||||
| -rw-r--r-- | platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c | 4 | ||||
| -rw-r--r-- | platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c | 4 | ||||
| -rw-r--r-- | platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/config.h | 2 | ||||
| -rw-r--r-- | platforms/chibios/bootloader.mk | 122 | ||||
| -rw-r--r-- | platforms/chibios/converters/promicro_to_elite_pi/_pin_defs.h | 36 | ||||
| -rw-r--r-- | platforms/chibios/converters/promicro_to_elite_pi/converter.mk | 9 | ||||
| -rw-r--r-- | platforms/chibios/drivers/ws2812_spi.c | 6 | ||||
| -rw-r--r-- | platforms/chibios/flash.mk | 3 |
11 files changed, 374 insertions, 6 deletions
diff --git a/platforms/arm_atsam/bootloader.mk b/platforms/arm_atsam/bootloader.mk new file mode 100644 index 0000000000..1ec42edeb6 --- /dev/null +++ b/platforms/arm_atsam/bootloader.mk @@ -0,0 +1,46 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# +# Current options for ARM (ATSAM): +# md-boot Atmel SAM-BA (only used by Drop boards) +# +# If you need to provide your own implementation, you can set inside `rules.mk` +# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See +# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see +# which functions may be overridden. + +ifeq ($(strip $(BOOTLOADER)), custom) + OPT_DEFS += -DBOOTLOADER_CUSTOM + BOOTLOADER_TYPE = custom +endif + +ifeq ($(strip $(BOOTLOADER)), md-boot) + OPT_DEFS += -DBOOTLOADER_MD_BOOT + BOOTLOADER_TYPE = md_boot +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + ifneq ($(strip $(BOOTLOADER)),) + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,Invalid bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + else + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + endif +endif diff --git a/platforms/avr/bootloader.mk b/platforms/avr/bootloader.mk new file mode 100644 index 0000000000..63fe635d96 --- /dev/null +++ b/platforms/avr/bootloader.mk @@ -0,0 +1,144 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# +# Current options for AVR: +# halfkay PJRC Teensy +# caterina Pro Micro (Sparkfun/generic) +# atmel-dfu Atmel factory DFU +# lufa-dfu LUFA DFU +# qmk-dfu QMK DFU (LUFA + blinkenlight) +# qmk-hid QMK HID (LUFA + blinkenlight) +# bootloadhid HIDBootFlash compatible (ATmega32A) +# usbasploader USBaspLoader (ATmega328P) +# +# If you need to provide your own implementation, you can set inside `rules.mk` +# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See +# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see +# which functions may be overridden. +# +# BOOTLOADER_SIZE can still be defined manually, but it's recommended +# you add any possible configuration to this list + +ifeq ($(strip $(BOOTLOADER)), custom) + OPT_DEFS += -DBOOTLOADER_CUSTOM + BOOTLOADER_TYPE = custom +endif + +ifeq ($(strip $(BOOTLOADER)), atmel-dfu) + OPT_DEFS += -DBOOTLOADER_ATMEL_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE = 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE = 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), lufa-dfu) + OPT_DEFS += -DBOOTLOADER_LUFA_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE ?= 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE ?= 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), qmk-dfu) + OPT_DEFS += -DBOOTLOADER_QMK_DFU + OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE ?= 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE ?= 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), qmk-hid) + OPT_DEFS += -DBOOTLOADER_QMK_HID + OPT_DEFS += -DBOOTLOADER_HID + BOOTLOADER_TYPE = dfu + + BOOTLOADER_SIZE ?= 4096 +endif +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay + + # Teensy 2.0 + ifeq ($(strip $(MCU)), atmega32u4) + BOOTLOADER_SIZE = 512 + endif + # Teensy 2.0++ + ifeq ($(strip $(MCU)), at90usb1286) + BOOTLOADER_SIZE = 1024 + endif +endif +ifeq ($(strip $(BOOTLOADER)), caterina) + OPT_DEFS += -DBOOTLOADER_CATERINA + BOOTLOADER_TYPE = caterina + + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), bootloadhid) + OPT_DEFS += -DBOOTLOADER_BOOTLOADHID + BOOTLOADER_TYPE = bootloadhid + + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), usbasploader) + OPT_DEFS += -DBOOTLOADER_USBASP + BOOTLOADER_TYPE = usbasploader + + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), lufa-ms) + OPT_DEFS += -DBOOTLOADER_MS + BOOTLOADER_TYPE = dfu + + BOOTLOADER_SIZE ?= 8192 + FIRMWARE_FORMAT = bin +cpfirmware: lufa_warning +.INTERMEDIATE: lufa_warning +lufa_warning: $(FIRMWARE_FORMAT) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) + $(info LUFA MASS STORAGE Bootloader selected) + $(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!) + $(info It is extremely prone to bricking, and is only included to support existing boards.) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) +endif +ifdef BOOTLOADER_SIZE + OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE)) +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + ifneq ($(strip $(BOOTLOADER)),) + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,Invalid bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + else + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + endif +endif diff --git a/platforms/avr/flash.mk b/platforms/avr/flash.mk index 6d50e72534..cd980b9733 100644 --- a/platforms/avr/flash.mk +++ b/platforms/avr/flash.mk @@ -177,9 +177,9 @@ else ifeq ($(strip $(BOOTLOADER)), halfkay) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq (dfu,$(findstring dfu,$(BOOTLOADER))) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU) -else ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp)) +else ifeq ($(strip $(BOOTLOADER)), usbasploader) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_USBASP) -else ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID)) +else ifeq ($(strip $(BOOTLOADER)), bootloadhid) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_BOOTLOADHID) else ifeq ($(strip $(BOOTLOADER)), qmk-hid) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_HID_LUFA) diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c index e38a7e0054..f74c9e8be7 100644 --- a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c @@ -80,3 +80,7 @@ void __early_init(void) { void boardInit(void) { } + +void restart_usb_driver(USBDriver *usbp) { + // Do nothing. Restarting the USB driver on these boards breaks it. +} diff --git a/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c b/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c index 22b4ff73b5..a99537fc27 100644 --- a/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c +++ b/platforms/chibios/boards/GENERIC_WB32_FQ95XX/board/board.c @@ -80,3 +80,7 @@ void __early_init(void) { void boardInit(void) { } + +void restart_usb_driver(USBDriver *usbp) { + // Do nothing. Restarting the USB driver on these boards breaks it. +} diff --git a/platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/config.h b/platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/config.h index e02e526113..d4c7e54642 100644 --- a/platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/config.h +++ b/platforms/chibios/boards/GENERIC_WB32_FQ95XX/configs/config.h @@ -18,3 +18,5 @@ #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif + +#define USB_ENDPOINTS_ARE_REORDERABLE diff --git a/platforms/chibios/bootloader.mk b/platforms/chibios/bootloader.mk new file mode 100644 index 0000000000..0568d35321 --- /dev/null +++ b/platforms/chibios/bootloader.mk @@ -0,0 +1,122 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# +# Current options for ARM: +# halfkay PJRC Teensy +# kiibohd Input:Club Kiibohd bootloader (only used on their boards) +# stm32duino STM32Duino (STM32F103x8) +# stm32-dfu STM32 USB DFU in ROM +# apm32-dfu APM32 USB DFU in ROM +# wb32-dfu WB32 USB DFU in ROM +# tinyuf2 TinyUF2 +# rp2040 Raspberry Pi RP2040 +# Current options for RISC-V: +# gd32v-dfu GD32V USB DFU in ROM +# +# If you need to provide your own implementation, you can set inside `rules.mk` +# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See +# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see +# which functions may be overridden. + +ifeq ($(strip $(BOOTLOADER)), custom) + OPT_DEFS += -DBOOTLOADER_CUSTOM + BOOTLOADER_TYPE = custom +endif + +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay + + # Teensy LC, 3.0, 3.1/2, 3.5, 3.6 + ifneq (,$(filter $(MCU_ORIG), MKL26Z64 MK20DX128 MK20DX256 MK64FX512 MK66FX1M0)) + FIRMWARE_FORMAT = hex + endif +endif +ifeq ($(strip $(BOOTLOADER)), stm32-dfu) + OPT_DEFS += -DBOOTLOADER_STM32_DFU + BOOTLOADER_TYPE = stm32_dfu + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif +ifeq ($(strip $(BOOTLOADER)), apm32-dfu) + OPT_DEFS += -DBOOTLOADER_APM32_DFU + BOOTLOADER_TYPE = stm32_dfu + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 314B -p 0106 +endif +ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) + OPT_DEFS += -DBOOTLOADER_GD32V_DFU + BOOTLOADER_TYPE = gd32v_dfu + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 28E9 -p 0189 +endif +ifeq ($(strip $(BOOTLOADER)), kiibohd) + OPT_DEFS += -DBOOTLOADER_KIIBOHD + BOOTLOADER_TYPE = kiibohd + + ifeq ($(strip $(MCU_ORIG)), MK20DX128) + MCU_LDSCRIPT = MK20DX128BLDR4 + endif + ifeq ($(strip $(MCU_ORIG)), MK20DX256) + MCU_LDSCRIPT = MK20DX256BLDR8 + endif + + # Options to pass to dfu-util when flashing + DFU_ARGS = -d 1C11:B007 + DFU_SUFFIX_ARGS = -v 1C11 -p B007 +endif +ifeq ($(strip $(BOOTLOADER)), stm32duino) + OPT_DEFS += -DBOOTLOADER_STM32DUINO + MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader + BOARD = STM32_F103_STM32DUINO + BOOTLOADER_TYPE = stm32duino + + # Options to pass to dfu-util when flashing + DFU_ARGS = -d 1EAF:0003 -a 2 -R + DFU_SUFFIX_ARGS = -v 1EAF -p 0003 +endif +ifeq ($(strip $(BOOTLOADER)), tinyuf2) + OPT_DEFS += -DBOOTLOADER_TINYUF2 + BOOTLOADER_TYPE = tinyuf2 + FIRMWARE_FORMAT = uf2 +endif +ifeq ($(strip $(BOOTLOADER)), rp2040) + OPT_DEFS += -DBOOTLOADER_RP2040 + BOOTLOADER_TYPE = rp2040 +endif +ifeq ($(strip $(BOOTLOADER)), wb32-dfu) + OPT_DEFS += -DBOOTLOADER_WB32_DFU + BOOTLOADER_TYPE = wb32_dfu +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + ifneq ($(strip $(BOOTLOADER)),) + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,Invalid bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + else + $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate bootloader in your rules.mk or info.json.) + endif +endif diff --git a/platforms/chibios/converters/promicro_to_elite_pi/_pin_defs.h b/platforms/chibios/converters/promicro_to_elite_pi/_pin_defs.h new file mode 100644 index 0000000000..1372bef79e --- /dev/null +++ b/platforms/chibios/converters/promicro_to_elite_pi/_pin_defs.h @@ -0,0 +1,36 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs +#define D5 12U +#define B0 13U diff --git a/platforms/chibios/converters/promicro_to_elite_pi/converter.mk b/platforms/chibios/converters/promicro_to_elite_pi/converter.mk new file mode 100644 index 0000000000..590a004189 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_elite_pi/converter.mk @@ -0,0 +1,9 @@ +# Elite-Pi MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index a73eb69720..390884a2a4 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -181,7 +181,7 @@ void ws2812_init(void) { spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */ spiSelect(&WS2812_SPI); /* Slave Select assertion. */ #ifdef WS2812_SPI_USE_CIRCULAR_BUFFER - spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); + spiStartSend(&WS2812_SPI, ARRAY_SIZE(txbuf), txbuf); #endif } @@ -200,9 +200,9 @@ void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { // Instead spiSend can be used to send synchronously (or the thread logic can be added back). #ifndef WS2812_SPI_USE_CIRCULAR_BUFFER # ifdef WS2812_SPI_SYNC - spiSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); + spiSend(&WS2812_SPI, ARRAY_SIZE(txbuf), txbuf); # else - spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); + spiStartSend(&WS2812_SPI, ARRAY_SIZE(txbuf), txbuf); # endif #endif } diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index 790c4f3316..2802368b5d 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -23,6 +23,7 @@ define EXEC_DFU_UTIL $(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin endef +WB32_DFU_UPDATER ?= wb32-dfu-updater_cli define EXEC_WB32_DFU_UPDATER if ! wb32-dfu-updater_cli -l | grep -q "Found DFU"; then \ @@ -34,7 +35,7 @@ define EXEC_WB32_DFU_UPDATER done ;\ printf "\n" ;\ fi - wb32-dfu-updater_cli -D $(BUILD_DIR)/$(TARGET).bin + $(WB32_DFU_UPDATER) -D $(BUILD_DIR)/$(TARGET).bin && $(WB32_DFU_UPDATER) -R endef dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter |