summaryrefslogtreecommitdiff
path: root/platforms/chibios/mcu_selection.mk
diff options
context:
space:
mode:
Diffstat (limited to 'platforms/chibios/mcu_selection.mk')
-rw-r--r--platforms/chibios/mcu_selection.mk825
1 files changed, 825 insertions, 0 deletions
diff --git a/platforms/chibios/mcu_selection.mk b/platforms/chibios/mcu_selection.mk
new file mode 100644
index 0000000000..6b6488466b
--- /dev/null
+++ b/platforms/chibios/mcu_selection.mk
@@ -0,0 +1,825 @@
+ifneq ($(findstring MKL26Z64, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0plus
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = KL2x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MKL26Z64
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= kl2x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_LC
+endif
+
+ifneq ($(findstring MK20DX128, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K20x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK20DX128
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k20x5
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3
+endif
+
+ifneq ($(findstring MK20DX256, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K20x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK20DX256
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k20x7
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_1
+endif
+
+ifneq ($(findstring MK64FX512, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = K60x
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK64FX512
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= k60x
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_5
+endif
+
+ifneq ($(findstring MK66FX1M0, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = KINETIS
+ MCU_SERIES = MK66F18
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= MK66FX1M0
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= MK66F18
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= PJRC_TEENSY_3_6
+endif
+
+ifneq ($(findstring RP2040, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0plus
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ CHIBIOS_PORT = ARMv6-M-RP2
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = RP
+ MCU_SERIES = RP2040
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ STARTUPLD_CONTRIB = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/ld
+ MCU_LDSCRIPT ?= RP2040_FLASH_TIMECRIT
+ LDFLAGS += -L $(STARTUPLD_CONTRIB)
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= rp2040
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_PROMICRO_RP2040
+
+ # Default UF2 Bootloader settings
+ UF2_FAMILY ?= RP2040
+ FIRMWARE_FORMAT ?= uf2
+endif
+
+ifneq ($(findstring STM32F042, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F0xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F042x6
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f0xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F042X6
+
+ USE_FPU ?= no
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F0
+
+ # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced.
+ # This ensures that the EEPROM page buffer fits into RAM
+ USE_PROCESS_STACKSIZE = 0x600
+ USE_EXCEPTIONS_STACKSIZE = 0x300
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400
+endif
+
+ifneq ($(findstring STM32F072, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m0
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 6
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F0xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F072xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f0xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F072XB
+
+ USE_FPU ?= no
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F0
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800
+endif
+
+ifneq ($(findstring STM32F103, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F1xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), uf2boot)
+ MCU_LDSCRIPT ?= STM32F103xB_uf2boot
+ else
+ MCU_LDSCRIPT ?= STM32F103x8
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f1xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F103
+
+ USE_FPU ?= no
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F1
+endif
+
+ifneq ($(findstring STM32F303, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F3xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+ MCU_LDSCRIPT ?= STM32F303xC_tinyuf2
+ else
+ MCU_LDSCRIPT ?= STM32F303xC
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f3xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F303XC
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F3
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800
+endif
+
+ifneq ($(findstring STM32F401, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+ MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
+ else
+ MCU_LDSCRIPT ?= STM32F401xC
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F401XC
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+
+ # Revert to legacy wear-leveling driver until ChibiOS's EFL driver is fixed with 128kB and 384kB variants.
+ EEPROM_DRIVER ?= wear_leveling
+ WEAR_LEVELING_DRIVER ?= legacy
+endif
+
+ifneq ($(findstring STM32F405, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F405xG
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F405XG
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32F407, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F407xE
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F407XE
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32F411, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ ifeq ($(strip $(BOOTLOADER)), tinyuf2)
+ MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
+ else
+ MCU_LDSCRIPT ?= STM32F411xE
+ endif
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F411XE
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32F4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32F446, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32F4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32F446xE
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32f4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_F446XE
+
+ USE_FPU ?= yes
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+
+ # Default as no chibios efl config
+ EEPROM_DRIVER ?= transient
+endif
+
+ifneq ($(findstring STM32G431, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32G4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32G431xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32g4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_G431XB
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32G4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring STM32G474, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32G4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32G474xE
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32g4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_G474XE
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32G4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq (,$(filter $(MCU),STM32L432 STM32L442))
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32L4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32L432xC
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32l4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_L432XC
+
+ PLATFORM_NAME ?= platform_l432
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq (,$(filter $(MCU),STM32L433 STM32L443))
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32L4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32L432xC
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32l4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_L433XC
+
+ PLATFORM_NAME ?= platform_l432
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq (,$(filter $(MCU),STM32L412 STM32L422))
+ # Cortex version
+ MCU = cortex-m4
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = STM32
+ MCU_SERIES = STM32L4xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= STM32L412xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= stm32l4xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_STM32_L412XB
+
+ PLATFORM_NAME ?= platform_l412_l422
+
+ USE_FPU ?= yes
+
+ # UF2 settings
+ UF2_FAMILY ?= STM32L4
+
+ # Bootloader address for STM32 DFU
+ STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000
+endif
+
+ifneq ($(findstring WB32F3G71, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = WB32
+ MCU_SERIES = WB32F3G71xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= WB32F3G71x9
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= wb32f3g71xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_WB32_F3G71XX
+
+ USE_FPU ?= no
+
+ # Bootloader address for WB32 DFU
+ WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
+endif
+
+ifneq ($(findstring WB32FQ95, $(MCU)),)
+ # Cortex version
+ MCU = cortex-m3
+
+ # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ ARMV = 7
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_FAMILY = WB32
+ MCU_SERIES = WB32FQ95xx
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= WB32FQ95xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+ MCU_STARTUP ?= wb32fq95xx
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= GENERIC_WB32_FQ95XX
+
+ USE_FPU ?= no
+
+ # Bootloader address for WB32 DFU
+ WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000
+endif
+
+ifneq ($(findstring GD32VF103, $(MCU)),)
+ # RISC-V
+ MCU = risc-v
+
+ # RISC-V extensions and abi configuration
+ MCU_ARCH = rv32imac
+ MCU_ABI = ilp32
+ MCU_CMODEL = medlow
+
+ ## chip/board settings
+ # - the next two should match the directories in
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES)
+ # OR
+ # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+ MCU_PORT_NAME = GD
+ MCU_FAMILY = GD32V
+ MCU_SERIES = GD32VF103
+
+ # Linker script to use
+ # - it should exist either in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/ld/
+ # or <keyboard_dir>/ld/
+ MCU_LDSCRIPT ?= GD32VF103xB
+
+ # Startup code to use
+ # - it should exist in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/
+ MCU_STARTUP ?= gd32vf103
+
+ # Board: it should exist either in <chibios>/os/hal/boards/,
+ # <keyboard_dir>/boards/, or drivers/boards/
+ BOARD ?= SIPEED_LONGAN_NANO
+
+ USE_FPU ?= no
+endif