summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/helix/local_drivers/i2c.c159
-rw-r--r--keyboards/helix/local_drivers/i2c.h46
-rw-r--r--keyboards/helix/local_drivers/serial.c589
-rw-r--r--keyboards/helix/local_drivers/serial.h86
-rw-r--r--keyboards/helix/local_drivers/ssd1306.c341
-rw-r--r--keyboards/helix/local_drivers/ssd1306.h89
-rw-r--r--keyboards/helix/rev2/config.h6
-rw-r--r--keyboards/helix/rev2/custom/matrix.c341
-rw-r--r--keyboards/helix/rev2/custom/split_scomm.c92
-rw-r--r--keyboards/helix/rev2/custom/split_scomm.h21
-rw-r--r--keyboards/helix/rev2/custom/split_util.c109
-rw-r--r--keyboards/helix/rev2/custom/split_util.h21
-rw-r--r--keyboards/helix/rev2/keymaps/default/oled_display.c196
-rw-r--r--keyboards/helix/rev2/local_features.mk53
-rw-r--r--keyboards/helix/rev2/override_helix_options.mk-maintenance (renamed from keyboards/helix/rev2/override_helix_options.mk)0
-rw-r--r--keyboards/helix/rev2/rev2.c16
-rw-r--r--keyboards/helix/rev2/rules.mk7
17 files changed, 133 insertions, 2039 deletions
diff --git a/keyboards/helix/local_drivers/i2c.c b/keyboards/helix/local_drivers/i2c.c
deleted file mode 100644
index 9221429e96..0000000000
--- a/keyboards/helix/local_drivers/i2c.c
+++ /dev/null
@@ -1,159 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-
- // easier way, but will wait slightly longer
- // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
-void i2c_master_init(void) {
- // no prescaler
- TWSR = 0;
- // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
- // Check datasheets for more info.
- TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-// 1 => error
-uint8_t i2c_master_start(uint8_t address) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
- i2c_delay();
-
- // check that we started successfully
- if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
- return 1;
-
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
- return 1; // slave did not acknowledge
- else
- return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-// 1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
- TWDR = data;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- // check if the slave acknowledged us
- return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
- i2c_delay();
- return TWDR;
-}
-
-void i2c_reset_state(void) {
- TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
- TWAR = address << 0; // slave i2c address
- // TWEN - twi enable
- // TWEA - enable address acknowledgement
- // TWINT - twi interrupt flag
- // TWIE - enable the twi interrupt
- TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
- uint8_t ack = 1;
- switch(TW_STATUS) {
- case TW_SR_SLA_ACK:
- // this device has been addressed as a slave receiver
- slave_has_register_set = false;
- break;
-
- case TW_SR_DATA_ACK:
- // this device has received data as a slave receiver
- // The first byte that we receive in this transaction sets the location
- // of the read/write location of the slaves memory that it exposes over
- // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
- // slave_buffer_pos after each write.
- if(!slave_has_register_set) {
- slave_buffer_pos = TWDR;
- // don't acknowledge the master if this memory loctaion is out of bounds
- if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
- ack = 0;
- slave_buffer_pos = 0;
- }
- slave_has_register_set = true;
- } else {
- i2c_slave_buffer[slave_buffer_pos] = TWDR;
- BUFFER_POS_INC();
- }
- break;
-
- case TW_ST_SLA_ACK:
- case TW_ST_DATA_ACK:
- // master has addressed this device as a slave transmitter and is
- // requesting data.
- TWDR = i2c_slave_buffer[slave_buffer_pos];
- BUFFER_POS_INC();
- break;
-
- case TW_BUS_ERROR: // something went wrong, reset twi state
- TWCR = 0;
- default:
- break;
- }
- // Reset everything, so we are ready for the next TWI interrupt
- TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
diff --git a/keyboards/helix/local_drivers/i2c.h b/keyboards/helix/local_drivers/i2c.h
deleted file mode 100644
index 710662c7ab..0000000000
--- a/keyboards/helix/local_drivers/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency 400kHz
-#define SCL_CLOCK 400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/helix/local_drivers/serial.c b/keyboards/helix/local_drivers/serial.c
deleted file mode 100644
index 674c42d593..0000000000
--- a/keyboards/helix/local_drivers/serial.c
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- * avr-gcc 4.9.2
- * avr-gcc 5.4.0
- * avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
- // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
- #ifdef USE_I2C
- #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
- #error Using ATmega32U4 I2C, so can not use PD0, PD1
- #endif
- #endif
-
- #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
- #define SERIAL_PIN_DDR DDRD
- #define SERIAL_PIN_PORT PORTD
- #define SERIAL_PIN_INPUT PIND
- #if SOFT_SERIAL_PIN == D0
- #define SERIAL_PIN_MASK _BV(PD0)
- #define EIMSK_BIT _BV(INT0)
- #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
- #define SERIAL_PIN_INTERRUPT INT0_vect
- #elif SOFT_SERIAL_PIN == D1
- #define SERIAL_PIN_MASK _BV(PD1)
- #define EIMSK_BIT _BV(INT1)
- #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
- #define SERIAL_PIN_INTERRUPT INT1_vect
- #elif SOFT_SERIAL_PIN == D2
- #define SERIAL_PIN_MASK _BV(PD2)
- #define EIMSK_BIT _BV(INT2)
- #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
- #define SERIAL_PIN_INTERRUPT INT2_vect
- #elif SOFT_SERIAL_PIN == D3
- #define SERIAL_PIN_MASK _BV(PD3)
- #define EIMSK_BIT _BV(INT3)
- #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
- #define SERIAL_PIN_INTERRUPT INT3_vect
- #endif
- #elif SOFT_SERIAL_PIN == E6
- #define SERIAL_PIN_DDR DDRE
- #define SERIAL_PIN_PORT PORTE
- #define SERIAL_PIN_INPUT PINE
- #define SERIAL_PIN_MASK _BV(PE6)
- #define EIMSK_BIT _BV(INT6)
- #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
- #define SERIAL_PIN_INTERRUPT INT6_vect
- #else
- #error invalid SOFT_SERIAL_PIN value
- #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
- #endif
- uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
- { (uint8_t *)&status0,
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- #else
- 0, (uint8_t *)NULL,
- #endif
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- #else
- 0, (uint8_t *)NULL,
- #endif
- }
-};
-
-void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers()
-{
- int result;
- result = soft_serial_transaction();
- return result;
-}
-
-#endif // end of OLD API (compatible with let's split serial.c)
-////////////////////////////////////////////////////////////////////////////
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
- // custom setup in config.h
- // #define TID_SEND_ADJUST 2
- // #define SERIAL_DELAY 6 // micro sec
- // #define READ_WRITE_START_ADJUST 30 // cycles
- // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-// 0: about 189kbps
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
- #define TID_SEND_ADJUST 14
-#else
- #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
- // Very High speed
- #define SERIAL_DELAY 4 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 34 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
- // High speed
- #define SERIAL_DELAY 6 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 30 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
- // Middle speed
- #define SERIAL_DELAY 12 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
- // Low speed
- #define SERIAL_DELAY 24 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
- // Very Low speed
- #define SERIAL_DELAY 36 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
- // Ultra Low speed
- #define SERIAL_DELAY 48 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
- #define SLAVE_INT_ACK_WIDTH_UNIT 2
- #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
- _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
- _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_input_with_pullup();
-
- // Enable INT0-INT3,INT6
- EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
- // Trigger on falling edge of INT6
- EICRB &= EICRx_BIT;
-#else
- // Trigger on falling edge of INT0-INT3
- EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
- for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
- }
- // This shouldn't hang if the target disconnects because the
- // serial line will float to high if the target does disconnect.
- while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
- uint8_t byte, i, p, pb;
-
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
- serial_delay_half1(); // read the middle of pulses
- if( serial_read_pin() ) {
- byte = (byte << 1) | 1; p ^= 1;
- } else {
- byte = (byte << 1) | 0; p ^= 0;
- }
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- /* recive parity bit */
- serial_delay_half1(); // read the middle of pulses
- pb = serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
-
- *pterrcount += (p != pb)? 1 : 0;
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
- uint8_t b, p;
- for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
- if(data & b) {
- serial_high(); p ^= 1;
- } else {
- serial_low(); p ^= 0;
- }
- serial_delay();
- }
- /* send parity bit */
- if(p & 1) { serial_high(); }
- else { serial_low(); }
- serial_delay();
-
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- data = buffer[i];
- sync_send();
- serial_write_chunk(data,8);
- }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
- uint8_t pecount = 0;
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- sync_recv();
- data = serial_read_chunk(&pecount, 8);
- buffer[i] = data;
- }
- return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
- sync_send(); //0
- serial_delay_half1(); //1
- serial_low(); //2
- serial_input_with_pullup(); //2
- serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
- sync_recv(); //0
- serial_delay(); //1
- serial_low(); //3
- serial_output(); //3
- serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
- bits = (bits & 0x5) + (bits >> 1 & 0x5);
- bits = (bits & 0x3) + (bits >> 2 & 0x3);
- return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- serial_low();
- serial_output();
- SSTD_t *trans = Transaction_table;
-#else
- // recive transaction table index
- uint8_t tid, bits;
- uint8_t pecount = 0;
- sync_recv();
- bits = serial_read_chunk(&pecount,7);
- tid = bits>>3;
- bits = (bits&7) != nibble_bits_count(tid);
- if( bits || pecount> 0 || tid > Transaction_table_size ) {
- return;
- }
- serial_delay_half1();
-
- serial_high(); // response step1 low->high
- serial_output();
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
- SSTD_t *trans = &Transaction_table[tid];
- serial_low(); // response step2 ack high->low
-#endif
-
- // target send phase
- if( trans->target2initiator_buffer_size > 0 )
- serial_send_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size);
- // target switch to input
- change_sender2reciver();
-
- // target recive phase
- if( trans->initiator2target_buffer_size > 0 ) {
- if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size) ) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-
- sync_recv(); //weit initiator output to high
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- SSTD_t *trans = Transaction_table;
-#else
-int soft_serial_transaction(int sstd_index) {
- if( sstd_index > Transaction_table_size )
- return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
- cli();
-
- // signal to the target that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- // wait for the target response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the target is present
- if (serial_read_pin()) {
- // target failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
-
-#else
- // send transaction table index
- int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
- sync_send();
- _delay_sub_us(TID_SEND_ADJUST);
- serial_write_chunk(tid, 7);
- serial_delay_half1();
-
- // wait for the target response (step1 low->high)
- serial_input_with_pullup();
- while( !serial_read_pin() ) {
- _delay_sub_us(2);
- }
-
- // check if the target is present (step2 high->low)
- for( int i = 0; serial_read_pin(); i++ ) {
- if (i > SLAVE_INT_ACK_WIDTH + 1) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
- }
-#endif
-
- // initiator recive phase
- // if the target is present syncronize with it
- if( trans->target2initiator_buffer_size > 0 ) {
- if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size) ) {
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
- sei();
- return TRANSACTION_DATA_ERROR;
- }
- }
-
- // initiator switch to output
- change_reciver2sender();
-
- // initiator send phase
- if( trans->initiator2target_buffer_size > 0 ) {
- serial_send_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size);
- }
-
- // always, release the line when not in use
- sync_send();
-
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
- SSTD_t *trans = &Transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;;
- sei();
- return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-// (adjusted with avr-gcc 7.3.0)
-// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-// (adjusted with avr-gcc 5.4.0, 7.3.0)
diff --git a/keyboards/helix/local_drivers/serial.h b/keyboards/helix/local_drivers/serial.h
deleted file mode 100644
index b4dcdafe57..0000000000
--- a/keyboards/helix/local_drivers/serial.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
-// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-// // 1: about 137kbps (default)
-// // 2: about 75kbps
-// // 3: about 39kbps
-// // 4: about 26kbps
-// // 5: about 20kbps
-//
-// //// USE OLD API (compatible with let's split serial.c)
-// ex.
-// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-// #define SERIAL_MASTER_BUFFER_LENGTH 1
-//
-// //// USE NEW API
-// //// USE simple API (using signle-type transaction function)
-// #define SERIAL_USE_SINGLE_TRANSACTION
-// //// USE flexible API (using multi-type transaction function)
-// #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-
-//////////////// for backward compatibility ////////////////////////////////
-#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION)
-/* --- USE OLD API (compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
- #endif
-
- void serial_master_init(void);
- void serial_slave_init(void);
- int serial_update_buffers(void);
-
-#endif // end of USE OLD API
-////////////////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t {
- uint8_t *status;
- uint8_t initiator2target_buffer_size;
- uint8_t *initiator2target_buffer;
- uint8_t target2initiator_buffer_size;
- uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR 0x2
-#define TRANSACTION_TYPE_ERROR 0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void);
-#else
-int soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-// initiator:
-// TRANSACTION_END
-// or TRANSACTION_NO_RESPONSE
-// or TRANSACTION_DATA_ERROR
-// target:
-// TRANSACTION_DATA_ERROR
-// or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index);
-#endif
diff --git a/keyboards/helix/local_drivers/ssd1306.c b/keyboards/helix/local_drivers/ssd1306.c
deleted file mode 100644
index 1cfb38037c..0000000000
--- a/keyboards/helix/local_drivers/ssd1306.c
+++ /dev/null
@@ -1,341 +0,0 @@
-
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#ifndef LOCAL_GLCDFONT
-#include "common/glcdfont.c"
-#else
-#include "helixfont.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
-
-struct CharacterMatrix display;
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble. Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-
-// 'last_flush' is declared as uint16_t,
-// so this must be less than 65535
-#define ScreenOffInterval 60000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-static bool force_dirty = true;
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
- bool res = false;
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
- goto done;
- }
-
- if (i2c_master_write(0x0 /* command byte follows */)) {
- print("failed to write control byte\n");
-
- goto done;
- }
-
- if (i2c_master_write(cmd)) {
- xprintf("failed to write command %d\n", cmd);
- goto done;
- }
- res = true;
-done:
- i2c_master_stop();
- return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- if (!_send_cmd1(opr1)) {
- return false;
- }
- return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void clear_display(void) {
- matrix_clear(&display);
-
- // Clear all of the display bits (there can be random noise
- // in the RAM on startup)
- send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
- send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < DisplayWidth; ++col) {
- i2c_master_write(0);
- }
- }
-
- display.dirty = false;
-
-done:
- i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
- sendchar(c);
- iota_gfx_write_char(c);
-
- if (!displaying) {
- iota_gfx_flush();
- }
- return 0;
-}
-#endif
-
-bool iota_gfx_init(bool rotate) {
- bool success = false;
-
- i2c_master_init();
- send_cmd1(DisplayOff);
- send_cmd2(SetDisplayClockDiv, 0x80);
- send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
- send_cmd2(SetDisplayOffset, 0);
-
-
- send_cmd1(SetStartLine | 0x0);
- send_cmd2(SetChargePump, 0x14 /* Enable */);
- send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
- if(rotate){
- // the following Flip the display orientation 180 degrees
- send_cmd1(SegRemap);
- send_cmd1(ComScanInc);
- }else{
- // Flips the display orientation 0 degrees
- send_cmd1(SegRemap | 0x1);
- send_cmd1(ComScanDec);
- }
-
- send_cmd2(SetComPins, 0x2);
- send_cmd2(SetContrast, 0x8f);
- send_cmd2(SetPreCharge, 0xf1);
- send_cmd2(SetVComDetect, 0x40);
- send_cmd1(DisplayAllOnResume);
- send_cmd1(NormalDisplay);
- send_cmd1(DeActivateScroll);
- send_cmd1(DisplayOn);
-
- send_cmd2(SetContrast, 0); // Dim
-
- clear_display();
-
- success = true;
-
- iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
- print_set_sendchar(capture_sendchar);
-#endif
-
-done:
- return success;
-}
-
-bool iota_gfx_off(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- success = true;
-
-done:
- return success;
-}
-
-bool iota_gfx_on(void) {
- bool success = false;
-
- send_cmd1(DisplayOn);
- success = true;
-
-done:
- return success;
-}
-
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
- *matrix->cursor = c;
- ++matrix->cursor;
-
- if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
- // We went off the end; scroll the display upwards by one line
- memmove(&matrix->display[0], &matrix->display[1],
- MatrixCols * (MatrixRows - 1));
- matrix->cursor = &matrix->display[MatrixRows - 1][0];
- memset(matrix->cursor, ' ', MatrixCols);
- }
-}
-
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
- matrix->dirty = true;
-
- if (c == '\n') {
- // Clear to end of line from the cursor and then move to the
- // start of the next line
- uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
- while (cursor_col++ < MatrixCols) {
- matrix_write_char_inner(matrix, ' ');
- }
- return;
- }
-
- matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
- matrix_write_char(&display, c);
-}
-
-void matrix_write(struct CharacterMatrix *matrix, const char *data) {
- const char *end = data + strlen(data);
- while (data < end) {
- matrix_write_char(matrix, *data);
- ++data;
- }
-}
-
-void iota_gfx_write(const char *data) {
- matrix_write(&display, data);
-}
-
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
- while (true) {
- uint8_t c = pgm_read_byte(data);
- if (c == 0) {
- return;
- }
- matrix_write_char(matrix, c);
- ++data;
- }
-}
-
-void iota_gfx_write_P(const char *data) {
- matrix_write_P(&display, data);
-}
-
-void matrix_clear(struct CharacterMatrix *matrix) {
- memset(matrix->display, ' ', sizeof(matrix->display));
- matrix->cursor = &matrix->display[0][0];
- matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
- matrix_clear(&display);
-}
-
-void matrix_render(struct CharacterMatrix *matrix) {
- last_flush = timer_read();
- iota_gfx_on();
-#if DEBUG_TO_SCREEN
- ++displaying;
-#endif
-
- // Move to the home position
- send_cmd3(PageAddr, 0, MatrixRows - 1);
- send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
-
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < MatrixCols; ++col) {
- const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
-
- for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
- uint8_t colBits = pgm_read_byte(glyph + glyphCol);
- i2c_master_write(colBits);
- }
-
- // 1 column of space between chars (it's not included in the glyph)
- //i2c_master_write(0);
- }
- }
-
- matrix->dirty = false;
-
-done:
- i2c_master_stop();
-#if DEBUG_TO_SCREEN
- --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
- matrix_render(&display);
-}
-
-__attribute__ ((weak))
-void iota_gfx_task_user(void) {
-}
-
-void iota_gfx_task(void) {
- iota_gfx_task_user();
-
- if (display.dirty|| force_dirty) {
- iota_gfx_flush();
- force_dirty = false;
- }
-
- if (timer_elapsed(last_flush) > ScreenOffInterval) {
- iota_gfx_off();
- }
-}
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
- force_dirty = true;
- return true;
-}
-
-#endif
diff --git a/keyboards/helix/local_drivers/ssd1306.h b/keyboards/helix/local_drivers/ssd1306.h
deleted file mode 100644
index a7527f4ebc..0000000000
--- a/keyboards/helix/local_drivers/ssd1306.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdio.h>
-#include "action.h"
-
-enum ssd1306_cmds {
- DisplayOff = 0xAE,
- DisplayOn = 0xAF,
-
- SetContrast = 0x81,
- DisplayAllOnResume = 0xA4,
-
- DisplayAllOn = 0xA5,
- NormalDisplay = 0xA6,
- InvertDisplay = 0xA7,
- SetDisplayOffset = 0xD3,
- SetComPins = 0xda,
- SetVComDetect = 0xdb,
- SetDisplayClockDiv = 0xD5,
- SetPreCharge = 0xd9,
- SetMultiPlex = 0xa8,
- SetLowColumn = 0x00,
- SetHighColumn = 0x10,
- SetStartLine = 0x40,
-
- SetMemoryMode = 0x20,
- ColumnAddr = 0x21,
- PageAddr = 0x22,
-
- ComScanInc = 0xc0,
- ComScanDec = 0xc8,
- SegRemap = 0xa0,
- SetChargePump = 0x8d,
- ExternalVcc = 0x01,
- SwitchCapVcc = 0x02,
-
- ActivateScroll = 0x2f,
- DeActivateScroll = 0x2e,
- SetVerticalScrollArea = 0xa3,
- RightHorizontalScroll = 0x26,
- LeftHorizontalScroll = 0x27,
- VerticalAndRightHorizontalScroll = 0x29,
- VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#ifndef SSD1306_ADDRESS
-#define SSD1306_ADDRESS 0x3C
-#endif
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
- uint8_t display[MatrixRows][MatrixCols];
- uint8_t *cursor;
- bool dirty;
-};
-
-extern struct CharacterMatrix display;
-
-bool iota_gfx_init(bool rotate);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-void iota_gfx_task_user(void);
-
-void matrix_clear(struct CharacterMatrix *matrix);
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write(struct CharacterMatrix *matrix, const char *data);
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
-void matrix_render(struct CharacterMatrix *matrix);
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
diff --git a/keyboards/helix/rev2/config.h b/keyboards/helix/rev2/config.h
index 577edba56b..8c6210bae4 100644
--- a/keyboards/helix/rev2/config.h
+++ b/keyboards/helix/rev2/config.h
@@ -45,12 +45,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
// #define EE_HANDS
-// Helix keyboard OLED support
-// see ./local_features.mk: OLED_SELECT=local
-#ifdef OLED_LOCAL_ENABLE
- #define SSD1306OLED
-#endif
-
#define OLED_UPDATE_INTERVAL 50
/* Select rows configuration */
diff --git a/keyboards/helix/rev2/custom/matrix.c b/keyboards/helix/rev2/custom/matrix.c
deleted file mode 100644
index 5221d7fd4e..0000000000
--- a/keyboards/helix/rev2/custom/matrix.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <string.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "quantum.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else // USE_SERIAL
-# include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- split_keyboard_setup();
-
- // initialize row and col
- unselect_rows();
- init_cols();
-
- setPinOutput(B0);
- setPinOutput(D5);
- writePinHigh(B0);
- writePinHigh(D5);
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) goto i2c_error;
-
- // start of matrix stored at 0x00
- err = i2c_master_write(0x00);
- if (err) goto i2c_error;
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) goto i2c_error;
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
- }
- matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return err;
- }
-
- return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
- int ret=serial_update_buffers(master_changed);
-#else
- int ret=serial_update_buffers();
-#endif
- if (ret ) {
- if(ret==2) writePinLow(B0);
- return 1;
- }
- writePinHigh(B0);
- memcpy(&matrix[slaveOffset],
- (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
- return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
- if (is_helix_master()) {
- matrix_master_scan();
- }else{
- matrix_slave_scan();
- int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
- memcpy(&matrix[offset],
- (void *)serial_master_buffer, sizeof(serial_master_buffer));
- matrix_scan_quantum();
- }
- return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
- int ret = _matrix_scan();
- int mchanged = 1;
-
-#ifndef KEYBOARD_helix_rev1
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-// for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
-// i2c_slave_buffer[i] = matrix[offset+i];
-// }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- mchanged = memcmp((void *)serial_master_buffer,
- &matrix[offset], sizeof(serial_master_buffer));
- #endif
- memcpy((void *)serial_master_buffer,
- &matrix[offset], sizeof(serial_master_buffer));
-#endif
-#endif
-
-#ifdef USE_MATRIX_I2C
- if( i2c_transaction() ) {
-#else // USE_SERIAL
- if( serial_transaction(mchanged) ) {
-#endif
- // turn on the indicator led when halves are disconnected
- writePinLow(D5);
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
- // turn off the indicator led on no error
- writePinHigh(D5);
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
- i2c_slave_buffer[i] = matrix[offset+i];
- }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- int change = 0;
- #endif
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- if( serial_slave_buffer[i] != matrix[offset+i] )
- change = 1;
- #endif
- serial_slave_buffer[i] = matrix[offset+i];
- }
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- slave_buffer_change_count += change;
- #endif
-#endif
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_bin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-static void init_cols(void)
-{
- for(int x = 0; x < MATRIX_COLS; x++) {
- _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/helix/rev2/custom/split_scomm.c b/keyboards/helix/rev2/custom/split_scomm.c
deleted file mode 100644
index 378781b98c..0000000000
--- a/keyboards/helix/rev2/custom/split_scomm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stddef.h>
-#include "split_scomm.h"
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
- #include "print.h"
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
- /* master buffer not changed, only recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- 0, NULL,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
- /* master buffer changed need send, and recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define GET_SLAVE_BUFFER 2
- /* recive serial_slave_buffer */
- { (uint8_t *)&status1,
- 0, NULL,
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- }
-};
-
-void serial_master_init(void)
-{
- soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
- soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
- int status, smatstatus;
- static int need_retry = 0;
-
- if( s_change_old != s_change_new ) {
- smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
- if( smatstatus == TRANSACTION_END ) {
- s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
- uprintf("slave matrix = %b %b %b %b %b\n",
- serial_slave_buffer[0], serial_slave_buffer[1],
- serial_slave_buffer[2], serial_slave_buffer[3],
- serial_slave_buffer[4] );
-#endif
- }
- } else {
- // serial_slave_buffer dosen't change
- smatstatus = TRANSACTION_END; // dummy status
- }
-
- if( !master_update && !need_retry) {
- status = soft_serial_transaction(GET_SLAVE_STATUS);
- } else {
- status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
- }
- if( status == TRANSACTION_END ) {
- s_change_new = slave_buffer_change_count;
- need_retry = 0;
- } else {
- need_retry = 1;
- }
- return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */
diff --git a/keyboards/helix/rev2/custom/split_scomm.h b/keyboards/helix/rev2/custom/split_scomm.h
deleted file mode 100644
index 16887eb74f..0000000000
--- a/keyboards/helix/rev2/custom/split_scomm.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif
diff --git a/keyboards/helix/rev2/custom/split_util.c b/keyboards/helix/rev2/custom/split_util.c
deleted file mode 100644
index ab40315487..0000000000
--- a/keyboards/helix/rev2/custom/split_util.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "wait.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else
-# include "split_scomm.h"
-#endif
-
-#ifdef EE_HANDS
-# include "eeconfig.h"
-#endif
-
-#ifndef SPLIT_USB_TIMEOUT
-# define SPLIT_USB_TIMEOUT 2000
-#endif
-
-#ifndef SPLIT_USB_TIMEOUT_POLL
-# define SPLIT_USB_TIMEOUT_POLL 10
-#endif
-
-volatile bool isLeftHand = true;
-
-bool waitForUsb(void) {
- for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / SPLIT_USB_TIMEOUT_POLL); i++) {
- // This will return true if a USB connection has been established
- if (UDADDR & _BV(ADDEN)) {
- return true;
- }
- wait_ms(SPLIT_USB_TIMEOUT_POLL);
- }
-
- // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
- (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
-
- return false;
-}
-
-
-bool is_keyboard_left(void) {
-#if defined(SPLIT_HAND_PIN)
- // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
- setPinInput(SPLIT_HAND_PIN);
- return readPin(SPLIT_HAND_PIN);
-#elif defined(EE_HANDS)
- return eeconfig_read_handedness();
-#elif defined(MASTER_RIGHT)
- return !is_helix_master();
-#endif
-
- return is_helix_master();
-}
-
-bool is_helix_master(void) {
- static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
-
- // only check once, as this is called often
- if (usbstate == UNKNOWN) {
-#if defined(SPLIT_USB_DETECT)
- usbstate = waitForUsb() ? MASTER : SLAVE;
-#elif defined(__AVR__)
- USBCON |= (1 << OTGPADE); // enables VBUS pad
- wait_us(5);
-
- usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
-#else
- usbstate = MASTER;
-#endif
- }
-
- return (usbstate == MASTER);
-}
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_master_init();
-#else
- serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
- serial_slave_init();
-#endif
-}
-
-void split_keyboard_setup(void) {
- isLeftHand = is_keyboard_left();
-
- if (is_helix_master()) {
- keyboard_master_setup();
- } else {
- keyboard_slave_setup();
- }
- sei();
-}
diff --git a/keyboards/helix/rev2/custom/split_util.h b/keyboards/helix/rev2/custom/split_util.h
deleted file mode 100644
index 3b1d4249f5..0000000000
--- a/keyboards/helix/rev2/custom/split_util.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-#ifdef SPLIT_KEYBOARD
-# error This is helix local split_util.h.
-# error This header file is used only when SPLIT_KEYBOARD=no.
-#endif
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS 0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool is_helix_master(void);
-
-void matrix_master_OLED_init (void);
diff --git a/keyboards/helix/rev2/keymaps/default/oled_display.c b/keyboards/helix/rev2/keymaps/default/oled_display.c
index 824d2e4d86..ad5558869f 100644
--- a/keyboards/helix/rev2/keymaps/default/oled_display.c
+++ b/keyboards/helix/rev2/keymaps/default/oled_display.c
@@ -18,10 +18,6 @@
#include <string.h>
#include QMK_KEYBOARD_H
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -35,10 +31,15 @@ enum layer_number {
_ADJUST
};
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#if defined(SSD1306OLED) || defined(OLED_ENABLE)
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER (1<<_LOWER)
+#define L_RAISE (1<<_RAISE)
+#define L_ADJUST (1<<_ADJUST)
+#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-# if defined(OLED_ENABLE)
+//OLED update loop
+#ifdef OLED_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (is_keyboard_master()) {
return OLED_ROTATION_0;
@@ -46,12 +47,120 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
return OLED_ROTATION_180;
}
}
-# else
-# define oled_write(data,flag) matrix_write(matrix, data)
-# define oled_write_P(data,flag) matrix_write_P(matrix, data)
+
+static void render_rgbled_status(bool full) {
+# ifdef RGBLIGHT_ENABLE
+ char buf[30];
+ if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
+ if (full) {
+ snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ",
+ rgblight_get_mode(),
+ rgblight_get_hue()/RGBLIGHT_HUE_STEP,
+ rgblight_get_sat()/RGBLIGHT_SAT_STEP,
+ rgblight_get_val()/RGBLIGHT_VAL_STEP);
+ } else {
+ snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode());
+ }
+ oled_write(buf, false);
+ }
# endif
+}
+
+static void render_layer_status(void) {
+ // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+ char buf[10];
+ oled_write_P(PSTR("Layer: "), false);
+ switch (layer_state) {
+ case L_BASE:
+ oled_write_P(PSTR("Default"), false);
+ break;
+ case L_RAISE:
+ oled_write_P(PSTR("Raise"), false);
+ break;
+ case L_LOWER:
+ oled_write_P(PSTR("Lower"), false);
+ break;
+ case L_ADJUST:
+ case L_ADJUST_TRI:
+ oled_write_P(PSTR("Adjust"), false);
+ break;
+ default:
+ oled_write_P(PSTR("Undef-"), false);
+ snprintf(buf,sizeof(buf), "%ld", layer_state);
+ oled_write(buf, false);
+ }
+ oled_write_P(PSTR("\n"), false);
+}
+
+void render_status(void) {
+ // Render to mode icon
+ static const char os_logo[][2][3] PROGMEM = {{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+ if (is_mac_mode()) {
+ oled_write_P(os_logo[0][0], false);
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(os_logo[0][1], false);
+ } else {
+ oled_write_P(os_logo[1][0], false);
+ oled_write_P(PSTR("\n"), false);
+ oled_write_P(os_logo[1][1], false);
+ }
+
+ oled_write_P(PSTR(" "), false);
+ render_layer_status();
+
+ // Host Keyboard LED Status
+ led_t led_state = host_keyboard_led_state();
+ oled_write_P(led_state.num_lock ? PSTR("NUMLOCK") : PSTR(" "), false);
+ oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false);
+ oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR(" "), false);
+ oled_advance_page(true);
+ render_rgbled_status(true);
+ oled_write_P(PSTR("\n"), false);
+}
+
+bool oled_task_user(void) {
+
+# if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+# endif
+
+ if (is_keyboard_master()) {
+ render_status();
+ } else {
+ render_helix_logo();
+ render_rgbled_status(false);
+ render_layer_status();
+ }
+ return false;
+}
+#endif // end of OLED_ENABLE
+
+//SSD1306 OLED update loop
+/*
+ The following code is left as a sample to help you transition from SSD1306OLED to OLED_ENABLE.
+
+ * `matrix_write(matrix, data)` is replaced by `oled_write(data, false)`.
+ * `matrix_write_P(matrix, data)` is replaced by `oled_write_P(data, false)`.
+ * It is no longer necessary to call `iota_gfx_task()`.
+ * `matrix_update()` are no longer needed.
+ * `iota_gfx_task_user()` is no longer needed. Instead, `bool oled_task_user(void)` is provided.
+
+ 以下のコードは、SSD1306OLED から OLED_ENABLE に移行する助けになるようにサンプルとして残してあります。
+
+ * `matrix_write(matrix, data)` は、`oled_write(data, false)` に書き換えます。
+ * `matrix_write_P(matrix, data)` は、`oled_write_P(data, false)` に書き換えます。
+ * `iota_gfx_task()` を呼び出す必要はなくなります。
+ * `matrix_update()` は不要になります。
+ * `iota_gfx_task_user()` は不要になります。代りに `bool oled_task_user(void)` を用意します。
+ */
+
+#ifdef SSD1306OLED
+#include "ssd1306.h"
+#define oled_write(data,flag) matrix_write(matrix, data)
+#define oled_write_P(data,flag) matrix_write_P(matrix, data)
-# ifdef SSD1306OLED
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
@@ -63,16 +172,7 @@ void matrix_update(struct CharacterMatrix *dest,
dest->dirty = true;
}
}
-# endif
-
-//assign the right code to your layers for OLED display
-#define L_BASE 0
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-# ifdef SSD1306OLED
static void render_logo(struct CharacterMatrix *matrix) {
static const char helix_logo[] PROGMEM ={
@@ -82,13 +182,8 @@ static void render_logo(struct CharacterMatrix *matrix) {
0};
oled_write_P(helix_logo, false);
}
-# endif
-# ifdef SSD1306OLED
static void render_rgbled_status(bool full, struct CharacterMatrix *matrix) {
-# else
-static void render_rgbled_status(bool full) {
-# endif
# ifdef RGBLIGHT_ENABLE
char buf[30];
if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) {
@@ -106,11 +201,7 @@ static void render_rgbled_status(bool full) {
# endif
}
-# ifdef SSD1306OLED
static void render_layer_status(struct CharacterMatrix *matrix) {
-# else
-static void render_layer_status(void) {
-# endif
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
char buf[10];
oled_write_P(PSTR("Layer: "), false);
@@ -136,11 +227,7 @@ static void render_layer_status(void) {
oled_write_P(PSTR("\n"), false);
}
-# ifdef SSD1306OLED
void render_status(struct CharacterMatrix *matrix) {
-# else
-void render_status(void) {
-# endif
// Render to mode icon
static const char os_logo[][2][3] PROGMEM = {{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
if (is_mac_mode()) {
@@ -154,11 +241,7 @@ void render_status(void) {
}
oled_write_P(PSTR(" "), false);
-# ifdef SSD1306OLED
render_layer_status(matrix);
-# else
- render_layer_status();
-# endif
// Host Keyboard LED Status
led_t led_state = host_keyboard_led_state();
@@ -166,35 +249,28 @@ void render_status(void) {
oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false);
oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR(" "), false);
oled_write_P(PSTR("\n"), false);
-# ifdef SSD1306OLED
render_rgbled_status(true, matrix);
-# else
- render_rgbled_status(true);
- oled_write_P(PSTR("\n"), false);
-# endif
}
-
-# ifdef SSD1306OLED
-# if OLED_UPDATE_INTERVAL > 0
+# if OLED_UPDATE_INTERVAL > 0
uint16_t oled_update_timeout;
-# endif
+# endif
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
-# if DEBUG_TO_SCREEN
+# if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
-# endif
+# endif
-#if OLED_UPDATE_INTERVAL > 0
+# if OLED_UPDATE_INTERVAL > 0
if (timer_elapsed(oled_update_timeout) < OLED_UPDATE_INTERVAL) {
return;
}
oled_update_timeout = timer_read();
-#endif
+# endif
matrix_clear(&matrix);
if (is_keyboard_master()) {
render_status(&matrix);
@@ -205,23 +281,5 @@ void iota_gfx_task_user(void) {
}
matrix_update(&display, &matrix);
}
-# else
-bool oled_task_user(void) {
-# if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-# endif
-
- if (is_keyboard_master()) {
- render_status();
- } else {
- render_helix_logo();
- render_rgbled_status(false);
- render_layer_status();
- }
- return false;
-}
-# endif
-#endif
+#endif // end of SSD1306OLED
diff --git a/keyboards/helix/rev2/local_features.mk b/keyboards/helix/rev2/local_features.mk
index c6f818bf39..34fd699a65 100644
--- a/keyboards/helix/rev2/local_features.mk
+++ b/keyboards/helix/rev2/local_features.mk
@@ -40,24 +40,6 @@ ifneq ($(strip $(HELIX)),)
SHOW_HELIX_OPTIONS = yes
endif
-ifneq ($(strip $(SPLIT_KEYBOARD)), yes)
- # In the very near future, all keymaps will be compatible with split_common and this block will be removed.
- SRC += local_drivers/serial.c
- KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
-
- # A workaround until #7089 is merged.
- # serial.c must not be compiled with the -lto option.
- # The current LIB_SRC has a side effect with the -fno-lto option, so use it.
- LIB_SRC += local_drivers/serial.c
-
- CUSTOM_MATRIX = yes
-
- SRC += rev2/custom/matrix.c
- SRC += rev2/custom/split_util.c
- SRC += rev2/custom/split_scomm.c
- KEYBOARD_PATHS += $(HELIX_TOP_DIR)/rev2/custom
-endif
-
########
# convert Helix-specific options (that represent combinations of standard options)
# into QMK standard options.
@@ -88,44 +70,17 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes)
endif
ifeq ($(strip $(OLED_ENABLE)), yes)
- ifeq ($(strip $(OLED_SELECT)),core)
- OLED_ENABLE = yes
- OLED_DRIVER = SSD1306
- ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
- OPT_DEFS += -DOLED_FONT_H=\<helixfont.h\>
- else
- OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
- endif
+ OLED_DRIVER = SSD1306
+ ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+ OPT_DEFS += -DOLED_FONT_H=\<helixfont.h\>
else
-
- # In the very near future, all keymaps will be compatible with QMK standard oled_driver and this block will be removed.
- ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
- $(info Helix/rev2: The following combinations are not supported.)
- $(info - SPLIT_KEYBOARD = $(SPLIT_KEYBOARD)) # yes
- $(info - OLED_ENABLE = $(OLED_ENABLE)) # yes
- $(info - OLED_SELECT = $(OLED_SELECT)) # local
- $(info Force : OLED_ENABLE = no)
- $(info .)
- OLED_ENABLE = no
- endif
- ifeq ($(strip $(OLED_ENABLE)), yes)
- OLED_ENABLE = no # disable OLED in TOP/common_features.mk
- OLED_LOCAL_ENABLE = yes
- SRC += local_drivers/i2c.c
- SRC += local_drivers/ssd1306.c
- KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
- OPT_DEFS += -DOLED_LOCAL_ENABLE
- ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
- OPT_DEFS += -DLOCAL_GLCDFONT
- endif
- endif
+ OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
endif
endif
ifneq ($(strip $(SHOW_HELIX_OPTIONS)),)
$(info Helix Spacific Build Options)
$(info - OLED_ENABLE = $(OLED_ENABLE))
- $(info - OLED_SELECT = $(OLED_SELECT))
$(info - LED_BACK_ENABLE = $(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
$(info - LED_ANIMATIONS = $(LED_ANIMATIONS))
diff --git a/keyboards/helix/rev2/override_helix_options.mk b/keyboards/helix/rev2/override_helix_options.mk-maintenance
index 56dee8ce78..56dee8ce78 100644
--- a/keyboards/helix/rev2/override_helix_options.mk
+++ b/keyboards/helix/rev2/override_helix_options.mk-maintenance
diff --git a/keyboards/helix/rev2/rev2.c b/keyboards/helix/rev2/rev2.c
index ba29f3c7de..2bbe9a28e2 100644
--- a/keyboards/helix/rev2/rev2.c
+++ b/keyboards/helix/rev2/rev2.c
@@ -20,14 +20,6 @@
// for the old keymap.c.
uint8_t is_master = false;
-#ifdef SSD1306OLED
-#include "ssd1306.h"
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-}
-#endif
-
bool is_mac_mode(void) {
// This is the opposite of the QMK standard, but we'll leave it for backwards compatibility.
return keymap_config.swap_lalt_lgui == false;
@@ -59,12 +51,6 @@ void keyboard_post_init_kb(void) {
keyboard_post_init_user();
}
-#if defined(SPLIT_KEYBOARD) && defined(SSD1306OLED)
-void matrix_slave_scan_user(void) {
- matrix_scan_user();
-}
-#endif
-
#ifdef OLED_ENABLE
void render_helix_logo(void) {
static const char helix_logo[] PROGMEM ={
@@ -82,7 +68,7 @@ bool oled_task_kb(void) {
oled_write_P(led_state.num_lock ? PSTR("NUMLOCK") : PSTR(" "), false);
oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false);
oled_write_P(led_state.scroll_lock ? PSTR("SCLK") : PSTR(" "), false);
- oled_write_P(PSTR("\n"), false);
+ oled_advance_page(true);
render_helix_logo();
}
return false;
diff --git a/keyboards/helix/rev2/rules.mk b/keyboards/helix/rev2/rules.mk
index 5ed92ff0ad..dce8b9d3ea 100644
--- a/keyboards/helix/rev2/rules.mk
+++ b/keyboards/helix/rev2/rules.mk
@@ -1,6 +1,6 @@
KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk
-# SPLIT_KEYBOARD = yes
+SPLIT_KEYBOARD = yes
# Helix Spacific Build Options default values
HELIX_ROWS = 5 # Helix Rows is 4 or 5
@@ -10,8 +10,3 @@ LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
-
-# If OLED_ENABLE is 'yes'
-# If OLED_SELECT is 'core', use QMK standard oled_dirver.c.
-# If OLED_SELECT is other than 'core', use helix/local_drivers/ssd1306.c.
-OLED_SELECT = local