diff options
Diffstat (limited to 'keyboards')
101 files changed, 4860 insertions, 364 deletions
diff --git a/keyboards/cannonkeys/obliterated75/chconf.h b/keyboards/cannonkeys/obliterated75/chconf.h new file mode 100644 index 0000000000..03f63da36a --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/cannonkeys/obliterated75/config.h b/keyboards/cannonkeys/obliterated75/config.h new file mode 100644 index 0000000000..bff3030b51 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCA04 +#define PRODUCT_ID 0x0B75 +#define DEVICE_VER 0x0001 +#define MANUFACTURER CannonKeys +#define PRODUCT Obliterated75 +#define DESCRIPTION Obliterated75 Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 } +#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A1 } +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN A6 +#define BACKLIGHT_PWM_DRIVER PWMD3 +#define BACKLIGHT_PWM_CHANNEL 1 +#define BACKLIGHT_PAL_MODE 1 +#define BACKLIGHT_LEVELS 6 +#define BACKLIGHT_BREATHING +#define BREATHING_PERIOD 6 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGBLIGHT_ANIMATIONS +#define RGB_DI_PIN B15 +#define RGBLED_NUM 20 +#define WS2812_SPI SPID2 +#define WS2812_SPI_MOSI_PAL_MODE 0 + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/obliterated75/halconf.h b/keyboards/cannonkeys/obliterated75/halconf.h new file mode 100644 index 0000000000..921803762e --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/cannonkeys/obliterated75/info.json b/keyboards/cannonkeys/obliterated75/info.json new file mode 100644 index 0000000000..b62cee36ca --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Obliterated75", + "url": "https://cannonkeys.com", + "maintainer": "awkannan", + "width": 16, + "height": 6.25, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"x":15, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"x":15, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":5.25, "w":1.25}, {"x":13, "y":5.25}, {"x":14, "y":5.25}, {"x":15, "y":5.25}] + } + } +} diff --git a/keyboards/cannonkeys/obliterated75/keymaps/default/keymap.c b/keyboards/cannonkeys/obliterated75/keymaps/default/keymap.c new file mode 100644 index 0000000000..2934aae189 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_names { + _BASE, + _FN1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN1] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, + BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/cannonkeys/obliterated75/keymaps/via/keymap.c b/keyboards/cannonkeys/obliterated75/keymaps/via/keymap.c new file mode 100644 index 0000000000..68fe4f7885 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/keymaps/via/keymap.c @@ -0,0 +1,71 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN1] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, + BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS + ), + + + [_FN2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_FN3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; diff --git a/keyboards/sirius/uni660/keymaps/via/rules.mk b/keyboards/cannonkeys/obliterated75/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/sirius/uni660/keymaps/via/rules.mk +++ b/keyboards/cannonkeys/obliterated75/keymaps/via/rules.mk diff --git a/keyboards/cannonkeys/obliterated75/mcuconf.h b/keyboards/cannonkeys/obliterated75/mcuconf.h new file mode 100644 index 0000000000..43fe0a462e --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/mcuconf.h @@ -0,0 +1,176 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/obliterated75/obliterated75.c b/keyboards/cannonkeys/obliterated75/obliterated75.c new file mode 100644 index 0000000000..347a643836 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/obliterated75.c @@ -0,0 +1 @@ +#include "obliterated75.h" diff --git a/keyboards/cannonkeys/obliterated75/obliterated75.h b/keyboards/cannonkeys/obliterated75/obliterated75.h new file mode 100644 index 0000000000..895223a1fd --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/obliterated75.h @@ -0,0 +1,19 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K006, K007, K008, K009, K010, K011, K012, K013, K015, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + K500, K501, K502, K506, K510, K511, K512, K513, K515 \ +) { \ + { K000, K001, K002, K003, K004, KC_NO, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, K015 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, KC_NO, K515 } \ +} diff --git a/keyboards/cannonkeys/obliterated75/readme.md b/keyboards/cannonkeys/obliterated75/readme.md new file mode 100644 index 0000000000..372b5500d1 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/readme.md @@ -0,0 +1,10 @@ +# CannonKeys Obliterated75 + +* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan) +* Hardware Supported: STM32F072CBT6 + +Make example for this keyboard (after setting up your build environment): + + make cannonkeys/obliterated75:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/obliterated75/rules.mk b/keyboards/cannonkeys/obliterated75/rules.mk new file mode 100644 index 0000000000..350b0d5324 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +WS2812_DRIVER = spi + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cospad/config.h b/keyboards/cospad/config.h index 42db8e25b7..362f6c38b1 100644 --- a/keyboards/cospad/config.h +++ b/keyboards/cospad/config.h @@ -65,7 +65,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_SAT_STEP 8 // #define RGBLIGHT_VAL_STEP 8 // #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== all animations enable ==*/ #define RGBLIGHT_ANIMATIONS // /*== or choose animations ==*/ diff --git a/keyboards/crkbd/keymaps/bcat/readme.md b/keyboards/crkbd/keymaps/bcat/readme.md index 71a9d93c95..9b2110a479 100644 --- a/keyboards/crkbd/keymaps/bcat/readme.md +++ b/keyboards/crkbd/keymaps/bcat/readme.md @@ -1,9 +1,24 @@ # bcat's Corne layout -This split ergo layout mirrors -[my Lily58 layout](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lily58/keymaps/bcat) -with the number row removed and RGB controls added. See that layout's docs for -more details on the principles that went into the layout. +This is my favorite split ergo layout for typing, featuring the traditional +four ortho/ergo layers (Default, Lower, Raise, Adjust). It is loosely inspired +by the default Planck (numbers on Lower, symbols on Raise) and Crkbd (Space on +left, Enter on right) layouts, but has since been redesigned heavily according +to the principles described below: + +* Since most of the modifiers are on the left half, keys frequently pressed +together with mods (e.g., numbers, function keys, etc.) are on the Raise layer +activated by the right thumb. + +* Navigation can be done on the right half alone, to enable simultaneous +left-handed mousing. Additionally, Web pages can be scrolled with Space or +Shift+Space on the left half alone, to enable taking notes with the right hand +at the same time. + +* Other than Right Shift (which I seldom use), mods aren't rebound on layers. + +* Likewise, Backspace is not rebound on layers to avoid having to let go of +layer-switch keys to correct mistakes. ## Default layer @@ -11,20 +26,97 @@ more details on the principles that went into the layout. ([KLE](http://www.keyboard-layout-editor.com/#/gists/08d9827d916662a9414f48805aa895a5)) +* The alpha keys are a standard QWERTY layout, no funny business there. + +* Tab and Backspace are in familiar locations from my row-staggered boards +(almost all of which use HHKB-style split backspace). + +* Likewise, the Ctrl key is in the same place as on my row-staggered boards +(where I've been remapping Caps Lock as Ctrl since before even using QMK). + +* There are two Shift keys, because I do use Right Shift on occasion (even +though I'm predominately a Left Shift-er). + +* Lower and Raise layer-switch keys are below the left and right thumb, +respectively, when resting my fingers on the home row. + +* Space and Enter are on the big thumb keys so they're easy to press. + +* Alt is on the left so I can navigate back (Alt+Raise+H) and forward +(Alt+Raise+L) without having to uncomfortably hit two thumb keys on the same +half. This puts Super on the right by the process of elimination. + +* Escape shares a mod-tap key with Ctrl, which is convenient for Vim, but not +something I'm totally in love with, as even after tweaking `TAPPING_TERM` I +still get occasional spurious Esc taps. (I might move Esc up a key and put Tab +on a layer, but that'd take some getting used to....) + ## Lower layer  ([KLE](http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0)) +* This could also be called the "symbol layer". + +* Shifted numbers are bound in their usual positions on the top row. + +* Hyphen/Underscore and Equals/Plus are in the right index- and middle-finger +columns for easy reach. They share the same relative position as on a +row-staggered keyboard, and the shifted versions are physically above the +unshifted versions as a mnemonic device. + +* Brackets and braces are placed below the parens for easy recall. Once again, +the shifted versions are on the home row and the unshifted versions are on the +bottom row. + +* Forward Slash/Pipe and Backtick/Tilde fill out the remaining positions on the +right half, with the same relative positions as on a row-staggered HHKB layout. +And yup, the shifted versions are above the unshifted versions. + +* Caps Lock is bound in the same position as on an HHKB, for lack of an obvious +better location. + +* Some extra keys are placed on the bottom row of the left half, ensuring every +key on a TKL has a binding. + +* The left-half home row is reversed for future use. (It's free real estate.) + ## Raise layer  ([KLE](http://www.keyboard-layout-editor.com/#/gists/08b44355d4ca85d294bad9e2821f91d7)) +* This could also be called the "number layer". + +* Unshifted numbers are bound in their usual positions on the top row. + +* Arrow keys are on VIM-style HJKL keys. + +* Home/End and Page Up/Page Down are in the same column as the arrow keys, but +translated down one row. (This means that the comma and period keys are not +bound on the number layer, which makes data entry a bit funky. I might add a +dedicated numpad layer to compensate.) + +* Function keys F1–F10 take up most of remaining space on the left half, with +F11 and F12 spilling over to the right half. (This puts the most used function +keys (F1–F5) on the home row.) + +* Insert and Delete are on the rightmost column, because there didn't seem to +be a better place to put them. + ## Adjust layer  ([KLE](http://www.keyboard-layout-editor.com/#/gists/77e7572e077b36a23eb2086017e16fee)) + +* Media keys are centered around the ESDF cluster, just like I arrange them on +row-staggered keyboards. (It's even more sensible with columnar stagger.) + +* The navigation keys are replaced by RGB controls. Again, this mirrors the +positioning I use on my row-staggered keyboards. + +* Finally, reset keys live at the top-left corner of the right half where it's +reasonably hard to press them by accident. diff --git a/keyboards/handwired/p1800fl/config.h b/keyboards/handwired/p1800fl/config.h new file mode 100644 index 0000000000..c2022a6b27 --- /dev/null +++ b/keyboards/handwired/p1800fl/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2020 marhalloweenvt + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3EAE +#define DEVICE_VER 0x0001 +#define MANUFACTURER marhalloweenvt +#define PRODUCT p1800fl +#define DESCRIPTION A compact 1800 layout keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, E6, B0, B1, B2, B3, D0, D1, D2} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* QMK DFU key configuration */ +#define QMK_ESC_OUTPUT C7 // usually COL +#define QMK_ESC_INPUT B6 // usually ROW
\ No newline at end of file diff --git a/keyboards/handwired/p1800fl/info.json b/keyboards/handwired/p1800fl/info.json new file mode 100644 index 0000000000..1509b59d96 --- /dev/null +++ b/keyboards/handwired/p1800fl/info.json @@ -0,0 +1,99 @@ +{ + "keyboard_name": "p1800fl", + "url": "", + "maintainer": "marhalloweenvt", + "width": 19.5, + "height": 5.25, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Num Lock", "x":15.5, "y":0}, + {"label":"/", "x":16.5, "y":0}, + {"label":"*", "x":17.5, "y":0}, + {"label":"-", "x":18.5, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"7", "x":15.5, "y":1}, + {"label":"8", "x":16.5, "y":1}, + {"label":"9", "x":17.5, "y":1}, + {"label":"+", "x":18.5, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25}, + {"label":"4", "x":15.5, "y":2}, + {"label":"5", "x":16.5, "y":2}, + {"label":"6", "x":17.5, "y":2}, + {"label":"+", "x":18.5, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"Shift", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"1", "x":15.5, "y":3}, + {"label":"2", "x":16.5, "y":3}, + {"label":"3", "x":17.5, "y":3}, + {"label":"Enter", "x":18.5, "y":3}, + {"label":"Up", "x":14.25, "y":3.25}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"6.25x", "x":3.75, "y":4, "w":6.25}, + {"label":"Ctrl", "x":10, "y":4}, + {"label":"Win", "x":11, "y":4}, + {"label":"Alt", "x":12, "y":4}, + {"label":"0", "x":16.5, "y":4}, + {"label":".", "x":17.5, "y":4}, + {"label":"Enter", "x":18.5, "y":4}, + {"label":"Left", "x":13.25, "y":4.25}, + {"label":"Down", "x":14.25, "y":4.25}, + {"label":"Right", "x":15.25, "y":4.25} + ] + } + } +} diff --git a/keyboards/handwired/p1800fl/keymaps/default/keymap.c b/keyboards/handwired/p1800fl/keymaps/default/keymap.c new file mode 100644 index 0000000000..03b6a1efd0 --- /dev/null +++ b/keyboards/handwired/p1800fl/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2020 marhalloweenvt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PEQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, BL_TOGG, BL_INC, KC_PAST, RESET, + _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, BL_BRTG, BL_DEC, _______, EEP_RST, + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/handwired/p1800fl/keymaps/default/readme.md b/keyboards/handwired/p1800fl/keymaps/default/readme.md new file mode 100644 index 0000000000..268d399224 --- /dev/null +++ b/keyboards/handwired/p1800fl/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for p1800fl diff --git a/keyboards/handwired/p1800fl/p1800fl.c b/keyboards/handwired/p1800fl/p1800fl.c new file mode 100644 index 0000000000..e0fc16a5e7 --- /dev/null +++ b/keyboards/handwired/p1800fl/p1800fl.c @@ -0,0 +1,28 @@ +/* Copyright 2020 marhalloweenvt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "p1800fl.h" + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + writePin(D3, led_state.num_lock); + writePin(D5, led_state.caps_lock); + writePin(C6, led_state.scroll_lock); + } + return res; +} + diff --git a/keyboards/handwired/p1800fl/p1800fl.h b/keyboards/handwired/p1800fl/p1800fl.h new file mode 100644 index 0000000000..7b8f3dcffd --- /dev/null +++ b/keyboards/handwired/p1800fl/p1800fl.h @@ -0,0 +1,42 @@ +/* Copyright 2020 marhalloweenvt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k50, k51, k52, k53, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k54, k55, k56, k57, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k58, k59, k5a, k5b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k5c, k5d, k5e, k4e, \ + k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { k40, k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k5e }, \ +} diff --git a/keyboards/handwired/p1800fl/readme.md b/keyboards/handwired/p1800fl/readme.md new file mode 100644 index 0000000000..545bd691a4 --- /dev/null +++ b/keyboards/handwired/p1800fl/readme.md @@ -0,0 +1,15 @@ +# p1800fl + + + +A 1800 Frow-less keyboard project from our local makers. + +* Keyboard Maintainer: [marhalloweenvt](https://github.com/marhalloweenvt) +* Hardware Supported: p1800fl +* Hardware Availability: p1800fl + +Make example for this keyboard (after setting up your build environment): + + make handwired/p1800fl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/p1800fl/rules.mk b/keyboards/handwired/p1800fl/rules.mk new file mode 100644 index 0000000000..b8601f0f10 --- /dev/null +++ b/keyboards/handwired/p1800fl/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 8c5b1988d6..45c8671cc5 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -19,8 +19,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D +#define VENDOR_ID 0x4B50 // "KP" +#define PRODUCT_ID 0x0044 // 4x4 #define DEVICE_VER 0x0200 #define MANUFACTURER KPrepublic #define PRODUCT JJ4x4 diff --git a/keyboards/jj4x4/info.json b/keyboards/jj4x4/info.json index 602fdc90a3..0fff9b9c88 100644 --- a/keyboards/jj4x4/info.json +++ b/keyboards/jj4x4/info.json @@ -1,30 +1,30 @@ { - "keyboard_name": "jj4x4", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3} - ] + "keyboard_name": "JJ4x4", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x4": { + "key_count": 16, + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3} + ] + } } - } -}
\ No newline at end of file +} diff --git a/keyboards/jj4x4/jj4x4.h b/keyboards/jj4x4/jj4x4.h index 7b8cb81835..ee17e896dd 100644 --- a/keyboards/jj4x4/jj4x4.h +++ b/keyboards/jj4x4/jj4x4.h @@ -28,14 +28,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * represents the switch matrix. */ #define LAYOUT_ortho_4x4( \ - K01, K02, K03, K04, \ - K11, K12, K13, K14, \ - K21, K22, K23, K24, \ - K31, K32, K33, K34 \ -) \ -{ \ - { K01, K02, K03, K04 }, \ - { K11, K12, K13, K14 }, \ - { K21, K22, K23, K24 }, \ - { K31, K32, K33, K34 } \ -} + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} diff --git a/keyboards/jj4x4/keymaps/default/keymap.c b/keyboards/jj4x4/keymaps/default/keymap.c index a0b06ee92a..ae2c6b5417 100644 --- a/keyboards/jj4x4/keymaps/default/keymap.c +++ b/keyboards/jj4x4/keymaps/default/keymap.c @@ -13,61 +13,56 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ + #include QMK_KEYBOARD_H enum layers { - _BASE = 0, - _FN1, - _FN2, + _BASE = 0, + _FN1, + _FN2 }; // Defines the keycodes used by our macros in process_record_user enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL + QMKBEST = SAFE_RANGE, + QMKURL }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BASE] = LAYOUT_ortho_4x4( - KC_PGUP, KC_HOME, KC_UP, KC_END , \ - KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, \ - MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, \ - MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT \ - ), - [_FN1] = LAYOUT_ortho_4x4( - KC_ESC, KC_P7, KC_P8, KC_P9, \ - KC_TAB, KC_P4, KC_P5, KC_P6, \ - KC_ENT, KC_P1, KC_P2, KC_P3, \ - _______, KC_P0, KC_P0, KC_DOT \ - ), - [_FN2] = LAYOUT_ortho_4x4( - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ - _______, _______, _______, RESET, \ - BL_STEP, _______, QMKBEST, QMKURL \ - ) - + [_BASE] = LAYOUT_ortho_4x4( + KC_PGUP, KC_HOME, KC_UP, KC_END, + KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, + MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, + MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT + ), + [_FN1] = LAYOUT_ortho_4x4( + KC_ESC, KC_P7, KC_P8, KC_P9, + KC_TAB, KC_P4, KC_P5, KC_P6, + KC_ENT, KC_P1, KC_P2, KC_P3, + _______, KC_P0, KC_P0, KC_DOT + ), + [_FN2] = LAYOUT_ortho_4x4( + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, + _______, _______, _______, RESET, + BL_STEP, _______, QMKBEST, QMKURL + ) }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/\n"); + } + break; + } + return true; } diff --git a/keyboards/jj4x4/keymaps/via/keymap.c b/keyboards/jj4x4/keymaps/via/keymap.c new file mode 100644 index 0000000000..35ca0e361d --- /dev/null +++ b/keyboards/jj4x4/keymaps/via/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_4x4( + KC_P7, KC_P8, KC_P9, KC_PSLS, + KC_P4, KC_P5, KC_P6, KC_PAST, + KC_P1, KC_P2, KC_P3, KC_PMNS, + KC_P0, KC_PDOT, KC_PPLS, LT(1, KC_ENT) + ), + LAYOUT_ortho_4x4( + RESET, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + LAYOUT_ortho_4x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + LAYOUT_ortho_4x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) +}; diff --git a/keyboards/jj4x4/keymaps/via/rules.mk b/keyboards/jj4x4/keymaps/via/rules.mk new file mode 100644 index 0000000000..82fb80d5e7 --- /dev/null +++ b/keyboards/jj4x4/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +EXTRAKEY_ENABLE = no +MOUSEKEY_ENABLE = no diff --git a/keyboards/jj4x4/README.md b/keyboards/jj4x4/readme.md index 24212bc990..714e8e88f7 100644 --- a/keyboards/jj4x4/README.md +++ b/keyboards/jj4x4/readme.md @@ -1,8 +1,8 @@ -# jj4x4 +# JJ4x4  -A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. +A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the JJ40 with rearranged keys. * Keyboard Maintainer: [QMK Community](https://github.com/qmk) * Hardware Supported: Atmega32A @@ -18,22 +18,22 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e **Reset Key**: -Hold down the key located at *K12*, commonly programmed as *8* while plugging in the keyboard USB cable. +Hold down the key located at *K11*, commonly programmed as *8* while plugging in the keyboard USB cable. -Key *K12* is in the above picture: +Key *K11* is in the above picture: Row 2 from the top, Column 2 from the left, see the schematic below: ``` - ,-----------------------. - | | | | | - |-----`-----`-----`-----| - | | K12 | | | - |-----`-----`-----`-----| - | | | | | - |-----`-----`-----`-----| - | | | | | - `-----`-----`-----`-----' +,-----------------------. +| | | | | +|-----`-----`-----`-----| +| | K11 | | | +|-----`-----`-----`-----| +| | | | | +|-----`-----`-----`-----| +| | | | | +`-----`-----`-----`-----' ``` See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index 82e25e6a7a..5ff5c37692 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -31,6 +31,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs +HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = ortho_4x4 diff --git a/keyboards/keebio/bdn9/bdn9.c b/keyboards/keebio/bdn9/bdn9.c index 0ff55fd6d4..f3842d0989 100644 --- a/keyboards/keebio/bdn9/bdn9.c +++ b/keyboards/keebio/bdn9/bdn9.c @@ -1 +1,18 @@ #include "bdn9.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/chocopad/chocopad.c b/keyboards/keebio/chocopad/chocopad.c index f54753af50..db62f02cc5 100644 --- a/keyboards/keebio/chocopad/chocopad.c +++ b/keyboards/keebio/chocopad/chocopad.c @@ -1 +1,18 @@ #include "chocopad.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/dilly/dilly.c b/keyboards/keebio/dilly/dilly.c index 89affe8509..da17277f69 100644 --- a/keyboards/keebio/dilly/dilly.c +++ b/keyboards/keebio/dilly/dilly.c @@ -1 +1,18 @@ #include "dilly.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/ergodicity/ergodicity.c b/keyboards/keebio/ergodicity/ergodicity.c index 0bbcf61178..790dc2f61e 100644 --- a/keyboards/keebio/ergodicity/ergodicity.c +++ b/keyboards/keebio/ergodicity/ergodicity.c @@ -1,51 +1,18 @@ -/* Copyright 2019 Keebio - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ #include "ergodicity.h" -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); } - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/keebio/iris/keymaps/dvorak/config.h b/keyboards/keebio/iris/keymaps/dvorak/config.h new file mode 100644 index 0000000000..d37d3c3123 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/config.h @@ -0,0 +1,33 @@ +/* +Copyright 2017 Danny Nguyen <danny@keeb.io> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL + +/* Select hand configuration */ + +#define MASTER_LEFT + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keebio/iris/keymaps/dvorak/keebio_iris_rev2_layout_dvorak.json b/keyboards/keebio/iris/keymaps/dvorak/keebio_iris_rev2_layout_dvorak.json new file mode 100644 index 0000000000..be5cc37938 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/keebio_iris_rev2_layout_dvorak.json @@ -0,0 +1,192 @@ +{ + "author": "", + "layers": [ + [ + "KC_ESC", + "KC_1", + "KC_2", + "KC_3", + "KC_4", + "KC_5", + "KC_6", + "KC_7", + "KC_8", + "KC_9", + "KC_0", + "KC_BSPC", + "KC_TAB", + "KC_QUOT", + "KC_COMM", + "KC_DOT", + "KC_P", + "KC_Y", + "KC_F", + "KC_G", + "KC_C", + "KC_R", + "KC_L", + "KC_SLSH", + "KC_LCTL", + "KC_A", + "KC_O", + "KC_E", + "KC_U", + "KC_I", + "KC_D", + "KC_H", + "KC_T", + "KC_N", + "KC_S", + "KC_MINS", + "KC_LSFT", + "KC_SCLN", + "KC_Q", + "KC_J", + "KC_K", + "KC_X", + "KC_HOME", + "KC_END", + "KC_B", + "KC_M", + "KC_W", + "KC_V", + "KC_Z", + "KC_RSFT", + "MO(1)", + "KC_LGUI", + "KC_ENT", + "KC_SPC", + "KC_RALT", + "MO(2)" + ], + [ + "KC_TILD", + "KC_EXLM", + "KC_AT", + "KC_HASH", + "KC_DLR", + "KC_PERC", + "KC_CIRC", + "KC_AMPR", + "KC_ASTR", + "KC_LPRN", + "KC_RPRN", + "KC_BSPC", + "RESET", + "KC_1", + "KC_2", + "KC_3", + "KC_4", + "KC_5", + "KC_6", + "KC_7", + "KC_8", + "KC_9", + "KC_0", + "KC_GRV", + "KC_DEL", + "KC_NO", + "KC_LEFT", + "KC_RGHT", + "KC_UP", + "KC_LCBR", + "KC_RCBR", + "KC_P4", + "KC_P5", + "KC_P6", + "KC_PPLS", + "KC_BSPC", + "BL_INC", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_DOWN", + "KC_LBRC", + "KC_LPRN", + "KC_RPRN", + "KC_RBRC", + "KC_P1", + "KC_P2", + "KC_P3", + "KC_PMNS", + "KC_PIPE", + "KC_NO", + "KC_NO", + "KC_DEL", + "KC_DEL", + "KC_NO", + "KC_P0" + ], + [ + "KC_F12", + "KC_F1", + "KC_F2", + "KC_F3", + "KC_F4", + "KC_F5", + "KC_F6", + "KC_F7", + "KC_F8", + "KC_F9", + "KC_F10", + "KC_F11", + "RGB_TOG", + "KC_EXLM", + "KC_AT", + "KC_HASH", + "KC_DLR", + "KC_PERC", + "KC_CIRC", + "KC_AMPR", + "KC_ASTR", + "KC_LPRN", + "KC_RPRN", + "KC_NO", + "RGB_MOD", + "KC_MRWD", + "KC_MFFD", + "KC_VOLU", + "KC_PGUP", + "KC_UNDS", + "KC_PEQL", + "KC_HOME", + "RGB_HUI", + "RGB_SAI", + "RGB_VAI", + "KC_BSLS", + "KC_MUTE", + "KC_MSTP", + "KC_MPLY", + "KC_VOLD", + "KC_PGDN", + "KC_PMNS", + "KC_NO", + "KC_NO", + "KC_PPLS", + "KC_END", + "RGB_HUD", + "RGB_SAD", + "RGB_VAD", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO" + ] + ], + "layout": "LAYOUT", + "keymap": "keebio_iris_rev2_layout_dvorak.json", + "keyboard": "keebio/iris/rev2", + "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code. + +To setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs> + +You can convert this file to a keymap.c using this command: `qmk json2c {keymap}` + +You can compile this keymap using this command: `qmk compile {keymap}`\" +", + "notes": "", + "version": 1 +} diff --git a/keyboards/keebio/iris/keymaps/dvorak/keymap.c b/keyboards/keebio/iris/keymaps/dvorak/keymap.c new file mode 100644 index 0000000000..3f0886521c --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/keymap.c @@ -0,0 +1,73 @@ +#include QMK_KEYBOARD_H +enum my_layers { + _DVORAK, + _LOWER, + _RAISE, + _ADJUST +}; + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_DVORAK] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_HOME, KC_END, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + LOWER, KC_LGUI, KC_ENT, KC_SPC, KC_RALT, RAISE + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ), + + [_LOWER] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRAVE, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + KC_DEL, _______, KC_LEFT, KC_RGHT, KC_UP, KC_LBRC, KC_RBRC, KC_P4, KC_P5, KC_P6, KC_PLUS, KC_BSPC, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + BL_STEP, _______, _______, _______, KC_DOWN, KC_LCBR, KC_LPRN, KC_RPRN, KC_RCBR, KC_P1, KC_P2, KC_P3, KC_MINS, KC_PIPE, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, KC_DEL, KC_DEL, _______, KC_P0 + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ), + + [_RAISE] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + RGB_TOG, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + RGB_MOD, KC_MPRV, KC_MNXT, KC_VOLU, KC_PGUP, KC_UNDS, KC_EQL, KC_HOME, RGB_HUI, RGB_SAI, RGB_VAI, KC_BSLS, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_MUTE, KC_MSTP, KC_MPLY, KC_VOLD, KC_PGDN, KC_MINS, _______, _______, KC_PLUS, KC_END, RGB_HUD, RGB_SAD, RGB_VAD, _______, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, _______, _______, _______, _______ + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ), + + [_ADJUST] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, _______, _______, _______, _______ + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/keebio/iris/keymaps/dvorak/readme.md b/keyboards/keebio/iris/keymaps/dvorak/readme.md new file mode 100644 index 0000000000..8397ef84ac --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/readme.md @@ -0,0 +1,16 @@ + + + +# Dvorak + +``` +make keebio/iris/rev2:dvorak +``` +``` +make keebio/iris/rev3:dvorak +``` +``` +make keebio/iris/rev4:dvorak +``` + +Tested with Iris rev. 2 diff --git a/keyboards/keebio/iris/keymaps/dvorak/rules.mk b/keyboards/keebio/iris/keymaps/dvorak/rules.mk new file mode 100644 index 0000000000..d7463419b4 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = yes diff --git a/keyboards/keebio/iris/rev2/rev2.c b/keyboards/keebio/iris/rev2/rev2.c index 8575243f0d..70c30695ad 100644 --- a/keyboards/keebio/iris/rev2/rev2.c +++ b/keyboards/keebio/iris/rev2/rev2.c @@ -1,12 +1,5 @@ #include "rev2.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - #ifdef SWAP_HANDS_ENABLE __attribute__ ((weak)) // swap-hands action needs a matrix to define the swap @@ -26,3 +19,19 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { }; #endif +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/iris/rev3/rev3.c b/keyboards/keebio/iris/rev3/rev3.c index 7e49330c1d..f58c2093c4 100644 --- a/keyboards/keebio/iris/rev3/rev3.c +++ b/keyboards/keebio/iris/rev3/rev3.c @@ -1,12 +1,5 @@ #include "rev3.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - #ifdef SWAP_HANDS_ENABLE __attribute__ ((weak)) // swap-hands action needs a matrix to define the swap @@ -25,3 +18,20 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}}, }; #endif + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/iris/rev4/rev4.c b/keyboards/keebio/iris/rev4/rev4.c index bd0989acb3..de2ba26db3 100644 --- a/keyboards/keebio/iris/rev4/rev4.c +++ b/keyboards/keebio/iris/rev4/rev4.c @@ -1 +1,18 @@ #include "rev4.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/levinson/rev2/rev2.c b/keyboards/keebio/levinson/rev2/rev2.c index 573fa787ba..8e65af7ade 100644 --- a/keyboards/keebio/levinson/rev2/rev2.c +++ b/keyboards/keebio/levinson/rev2/rev2.c @@ -1,22 +1,18 @@ #include "levinson.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/levinson/rev3/rev3.c b/keyboards/keebio/levinson/rev3/rev3.c index 573fa787ba..8e65af7ade 100644 --- a/keyboards/keebio/levinson/rev3/rev3.c +++ b/keyboards/keebio/levinson/rev3/rev3.c @@ -1,22 +1,18 @@ #include "levinson.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/nyquist/rev2/rev2.c b/keyboards/keebio/nyquist/rev2/rev2.c index 9922b8995a..b5652e06d3 100644 --- a/keyboards/keebio/nyquist/rev2/rev2.c +++ b/keyboards/keebio/nyquist/rev2/rev2.c @@ -1,21 +1,18 @@ #include "rev2.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/nyquist/rev3/rev3.c b/keyboards/keebio/nyquist/rev3/rev3.c index 34500fb104..6d7dc3531d 100644 --- a/keyboards/keebio/nyquist/rev3/rev3.c +++ b/keyboards/keebio/nyquist/rev3/rev3.c @@ -1,21 +1,18 @@ #include "rev3.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/quefrency/rev1/rev1.c b/keyboards/keebio/quefrency/rev1/rev1.c index a690a7eff7..567730535d 100644 --- a/keyboards/keebio/quefrency/rev1/rev1.c +++ b/keyboards/keebio/quefrency/rev1/rev1.c @@ -1,5 +1,14 @@ #include "quefrency.h" -void matrix_init_kb(void) { - matrix_init_user(); -}; +void eeconfig_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/viterbi/rev2/rev2.c b/keyboards/keebio/viterbi/rev2/rev2.c index 509e42dc51..dbf584f99e 100644 --- a/keyboards/keebio/viterbi/rev2/rev2.c +++ b/keyboards/keebio/viterbi/rev2/rev2.c @@ -1 +1,18 @@ #include "viterbi.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/lily58/keymaps/bcat/config.h b/keyboards/lily58/keymaps/bcat/config.h index 1809262044..f7f08d076a 100644 --- a/keyboards/lily58/keymaps/bcat/config.h +++ b/keyboards/lily58/keymaps/bcat/config.h @@ -1,3 +1,6 @@ #pragma once #define EE_HANDS + +/* Work around Elite-C v3 with broken VBUS detection. */ +#define SPLIT_USB_DETECT diff --git a/keyboards/lily58/keymaps/bcat/readme.md b/keyboards/lily58/keymaps/bcat/readme.md index 389def1432..0ea0d2278e 100644 --- a/keyboards/lily58/keymaps/bcat/readme.md +++ b/keyboards/lily58/keymaps/bcat/readme.md @@ -1,49 +1,18 @@ # bcat's Lily58 layout -This split ergo layout is standard QWERTY on the default layer, with symbols on -the lower layer, numbers/navigation on the raise layer, and media keys centered -around the ESDF cluster in the adjust (raise + lower) layer. A few general -principles went into this layout: +This split ergo layout follows my preferred [Crkbd +layout](https://github.com/qmk/qmk_firmware/tree/master/keyboards/crkbd/keymaps/bcat) +with the following changes: -* The number row is optional, as are the outermost bottom row keys and the -"extra" keys on the innnermost columns below the controllers. This allows me to -switch between this keyboard and a 40% like the -[Crkbd](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lily58/keymaps/bcat) -without breaking muscle memory. +* There's an optional number row at the top of the keyboard. I am quite used to +using layers for numbers and symbols, so in practice this goes unused. -* Space and Enter are on the big thumb keys so they're easy to press. +* The dedicated Hyphen/Underscore and Equals/Plus keys on the number row are +placed in the same positions as on the ErgoDox EZ. (There's no real reason for +this; I just had to do _something_ with those keys.) -* There are two shift keys because Right Shift is all that important, but just -because I don't have any better ideas for what to put there. - -* Arrow keys are on VIM-style HJKL keys. - -* Home/End and Page Up/Page Down are equivalent to the arrow keys, but -translated down one row. - -* Navigation is usable with just the right hand, to enable left-handed mousing -at the same time. Additionally, Web page scrolling (Space, Shift+Space) is -possible with just the left hand, for writing at the same time as scrolling. - -* Escape is easy to reach because Vim is life. - -* Since most of the modifiers are on the left half, keys frequently pressed -together with mods (e.g., numbers, function keys, etc.) are on the Raise layer -activated by the right thumb. - -* Every key on a TKL has a binding. - -* Backspace is bound in the same place on every layer to avoid having to let go -of layer-shift keys to fix a mistake. - -* Likewise, the comma and period keys are not rebound on the raise layer to -allow typing numbers with thousand separators and decimal points without -releasing the layer key. - -* Brackets and braces are on or near the home row for quick access when coding. -They're positioned below the parens on the Raise layer for easy recall. - -* For consistency, mods aren't rebound on layers (except for the Tab key). +* The extra thumb keys are used for dedicated Ctrl/Menu keys (not super useful) +and browser back/forward navigation keys (actually more useful than expected). ## Default layer diff --git a/keyboards/maartenwut/plain60/keymaps/via/keymap.c b/keyboards/maartenwut/plain60/keymaps/via/keymap.c index 7e8cfff354..a500f23896 100644 --- a/keyboards/maartenwut/plain60/keymaps/via/keymap.c +++ b/keyboards/maartenwut/plain60/keymaps/via/keymap.c @@ -1,17 +1,32 @@ #include QMK_KEYBOARD_H -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _MA 0 - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL) +[0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL), + +[1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), }; diff --git a/keyboards/maartenwut/ta65/config.h b/keyboards/maartenwut/ta65/config.h index d54a6273d8..729f21a2e2 100644 --- a/keyboards/maartenwut/ta65/config.h +++ b/keyboards/maartenwut/ta65/config.h @@ -24,7 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x7465 #define DEVICE_VER 0x0001 #define MANUFACTURER Maartenwut -#define PRODUCT TA-65 +#define PRODUCT ta-65 #define DESCRIPTION A universal 65% PCB with underglow. /* key matrix size */ @@ -37,6 +37,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0} #define UNUSED_PINS +#define ENCODERS_PAD_A { B2 } +#define ENCODERS_PAD_B { B1 } + +/* Uncomment if your encoder doesn't react to every turn or skips */ +//#define ENCODER_RESOLUTION 2 + /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maartenwut/ta65/keymaps/default/keymap.c b/keyboards/maartenwut/ta65/keymaps/default/keymap.c index b04172c759..8bb8a14ba0 100644 --- a/keyboards/maartenwut/ta65/keymaps/default/keymap.c +++ b/keyboards/maartenwut/ta65/keymaps/default/keymap.c @@ -1,17 +1,38 @@ #include QMK_KEYBOARD_H -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _MA 0 - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT) +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + }; + +void encoder_update_user(uint8_t index, bool clockwise) { + switch(get_highest_layer(layer_state)){ + case 1: //Layer 1 + if (!clockwise) { // Remove ! to reverse direction + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + break; + default: //Layer 0 + if (!clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } +} diff --git a/keyboards/maartenwut/ta65/rules.mk b/keyboards/maartenwut/ta65/rules.mk index db0567bd03..86efb933bb 100644 --- a/keyboards/maartenwut/ta65/rules.mk +++ b/keyboards/maartenwut/ta65/rules.mk @@ -12,19 +12,24 @@ MCU = atmega32u4 BOOTLOADER = qmk-dfu # Build Options -# comment out to disable the options. +# change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +ENCODER_ENABLE = yes LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/maartenwut/wasdat/info.json b/keyboards/maartenwut/wasdat/info.json index 8f931f46cf..6154bd5555 100644 --- a/keyboards/maartenwut/wasdat/info.json +++ b/keyboards/maartenwut/wasdat/info.json @@ -185,7 +185,6 @@ {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, @@ -209,6 +208,7 @@ {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, @@ -405,7 +405,6 @@ {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, @@ -424,6 +423,7 @@ {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, diff --git a/keyboards/maartenwut/wasdat_code/config.h b/keyboards/maartenwut/wasdat_code/config.h new file mode 100644 index 0000000000..16d5acd9c4 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/config.h @@ -0,0 +1,258 @@ +/* +Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0xB00E +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maartenwut +#define PRODUCT Wasdat Code +#define DESCRIPTION Custom controller for the WASD CODE TKL and 104-key keyboards + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6, C7, C6, B6, B5, B4, D7, D6 } +#define MATRIX_COL_PINS { } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +// For QMK DFU +#define QMK_ESC_OUTPUT E6 +#define QMK_ESC_INPUT F0 +#define QMK_LED B1 + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 2 +#define BOOTMAGIC_LITE_COLUMN 3 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/maartenwut/wasdat_code/info.json b/keyboards/maartenwut/wasdat_code/info.json new file mode 100644 index 0000000000..526883f8d5 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/info.json @@ -0,0 +1,459 @@ +{ + "keyboard_name": "Wasdat Code", + "url": "https://maartenwut.com/product/wasdat-code/", + "maintainer": "Maartenwut", + "width": 22.5, + "height": 6.5, + "layouts": { + "LAYOUT_fullsize_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_fullsize_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Num Lock", "x":18.5, "y":1.5}, + {"label":"/", "x":19.5, "y":1.5}, + {"label":"*", "x":20.5, "y":1.5}, + {"label":"-", "x":21.5, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"7", "x":18.5, "y":2.5}, + {"label":"8", "x":19.5, "y":2.5}, + {"label":"9", "x":20.5, "y":2.5}, + {"label":"+", "x":21.5, "y":2.5, "h":2}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"4", "x":18.5, "y":3.5}, + {"label":"5", "x":19.5, "y":3.5}, + {"label":"6", "x":20.5, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"1", "x":18.5, "y":4.5}, + {"label":"2", "x":19.5, "y":4.5}, + {"label":"3", "x":20.5, "y":4.5}, + {"label":"Enter", "x":21.5, "y":4.5, "h":2}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5}, + + {"label":"0", "x":18.5, "y":5.5, "w":2}, + {"label":".", "x":20.5, "y":5.5} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"Page Up", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"\u00ac", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"\"", "x":2, "y":1.5}, + {"label":"\u00a3", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"@", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"|", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"x":3.75, "y":5.5, "w":6.25}, + {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + } + } +} diff --git a/keyboards/maartenwut/wasdat_code/keymaps/default/keymap.c b/keyboards/maartenwut/wasdat_code/keymaps/default/keymap.c new file mode 100644 index 0000000000..beee150b60 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/default/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ │ 4 │ 5 │ 6 │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ ├───┼───┼───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_fullsize_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + LAYOUT_fullsize_ansi( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/maartenwut/wasdat_code/keymaps/default/readme.md b/keyboards/maartenwut/wasdat_code/keymaps/default/readme.md new file mode 100644 index 0000000000..66cf593892 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default ANSI keymap for the Wasdat diff --git a/keyboards/maartenwut/wasdat_code/keymaps/default_iso/keymap.c b/keyboards/maartenwut/wasdat_code/keymaps/default_iso/keymap.c new file mode 100644 index 0000000000..8bdad48312 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/default_iso/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │Esc│ │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PSc│Slk│Pse│ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ │Num│ / │ * │ - │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │ │Del│End│PgD│ │ 7 │ 8 │ 9 │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent│ └───┴───┴───┘ ├───┼───┼───┤ + │ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │ │ 4 │ 5 │ 6 │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤ ┌───┐ ├───┼───┼───┼───┤ + * │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ │ 1 │ 2 │ 3 │ │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤Ent│ + * │Ctrl│GUI │Alt │ │AlGr│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ │ 0 │ . │ │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ + */ + LAYOUT_fullsize_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ) +}; diff --git a/keyboards/maartenwut/wasdat_code/keymaps/default_iso/readme.md b/keyboards/maartenwut/wasdat_code/keymaps/default_iso/readme.md new file mode 100644 index 0000000000..e36d764201 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/default_iso/readme.md @@ -0,0 +1 @@ +# The default ISO keymap for the Wasdat diff --git a/keyboards/maartenwut/wasdat_code/keymaps/via/keymap.c b/keyboards/maartenwut/wasdat_code/keymaps/via/keymap.c new file mode 100644 index 0000000000..c3155c1e72 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + [1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/maartenwut/wasdat_code/keymaps/via/rules.mk b/keyboards/maartenwut/wasdat_code/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/maartenwut/wasdat_code/matrix.c b/keyboards/maartenwut/wasdat_code/matrix.c new file mode 100644 index 0000000000..7844db7ab7 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/matrix.c @@ -0,0 +1,369 @@ +/* +Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#include "wait.h" +#include "util.h" +#include "matrix.h" +#include "debounce.h" +#include "quantum.h" + +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +#endif + +// matrix code + +#ifdef DIRECT_PINS + +static void init_pins(void) { + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } + } + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; + + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + } + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == COL2ROW) + +static void select_row(uint8_t row) { + setPinOutput(row_pins[row]); + writePinLow(row_pins[row]); +} + +static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } + +static void unselect_rows(void) { + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static void init_pins(void) { + unselect_rows(); + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + + // Select the col pin to read (active low) + uint8_t pin_state = readPin(col_pins[col_index]); + + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == ROW2COL) + +/* Cols 0 - 15 + * col 0: F7 + * col 1: F5 + * col 2: F6 + * col 3: F1 + * col 4: F4 + * col 5: F0 + * These columns use a 74HC237D 3 to 8 bit demultiplexer. D4 is the enable pin, must be set high to use it. + * A0 A1 A2 + * col / pin: PD2 PD1 PD0 + * 6: 1 1 1 + * col 7: D3 + * col 8: B7 + * 9: 0 1 1 + * 10: 1 0 1 + * 11: 0 0 1 + * 12: 1 1 0 + * 13: 0 1 0 + * 14: 1 0 0 + * 15: 0 0 0 + */ +static void select_col(uint8_t col) { + switch (col) { + case 0: + writePinLow(F7); + break; + case 1: + writePinLow(F5); + break; + case 2: + writePinLow(F6); + break; + case 3: + writePinLow(F1); + break; + case 4: + writePinLow(F4); + break; + case 5: + writePinLow(F0); + break; + case 6: + writePinHigh(D4); + writePinHigh(D2); + writePinHigh(D1); + writePinHigh(D0); + break; + case 7: + writePinLow(D5); + break; + case 8: + writePinLow(D3); + break; + case 9: + writePinHigh(D4); + writePinHigh(D1); + writePinHigh(D0); + break; + case 10: + writePinHigh(D4); + writePinHigh(D2); + writePinHigh(D0); + break; + case 11: + writePinHigh(D4); + writePinHigh(D0); + break; + case 12: + writePinHigh(D4); + writePinHigh(D2); + writePinHigh(D1); + break; + case 13: + writePinHigh(D4); + writePinHigh(D1); + break; + case 14: + writePinHigh(D4); + writePinHigh(D2); + break; + case 15: + writePinHigh(D4); + break; + } +} + +static void unselect_col(uint8_t col) { + switch (col) { + case 0: + writePinHigh(F7); + break; + case 1: + writePinHigh(F5); + break; + case 2: + writePinHigh(F6); + break; + case 3: + writePinHigh(F1); + break; + case 4: + writePinHigh(F4); + break; + case 5: + writePinHigh(F0); + break; + case 6: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 7: + writePinHigh(D5); + break; + case 8: + writePinHigh(D3); + break; + case 9: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 10: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 11: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 12: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 13: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 14: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + case 15: + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); + break; + } +} + +static void unselect_cols(void) { + //Native + writePinHigh(F7); + writePinHigh(F5); + writePinHigh(F6); + writePinHigh(F1); + writePinHigh(F4); + writePinHigh(F0); + writePinHigh(D3); + writePinHigh(D5); + + //Demultiplexer + writePinLow(D4); + writePinLow(D2); + writePinLow(D1); + writePinLow(D0); +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D2); + setPinOutput(D3); + setPinOutput(F7); + setPinOutput(F5); + setPinOutput(F6); + setPinOutput(F1); + setPinOutput(F4); + setPinOutput(F0); + setPinOutput(D3); + setPinOutput(D5); + setPinOutput(D4); +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if (readPin(row_pins[row_index]) == 0) { + // Pin LO, set col bit + current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + } else { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +#endif + +void matrix_init_custom(void) { + // initialize key pins + init_pins(); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= read_cols_on_row(current_matrix, current_row); + } +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } +#endif + + return changed; +} diff --git a/keyboards/maartenwut/wasdat_code/readme.md b/keyboards/maartenwut/wasdat_code/readme.md new file mode 100644 index 0000000000..403fabc684 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/readme.md @@ -0,0 +1,19 @@ +# Wasdat Code + +A drop-in replacement controller for the WASD CODE TKL and fullsize models. + +* Keyboard Maintainer: [Maartenwut](https://github.com/Maartenwut) +* Hardware Supported: WASD CODE TKL/Fullsize ANSI & ISO with Wasdat Code controller +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat-code/) + +## Flashing + +The WASD has no reset button, so to put the controller in flashing mode, simply unplug the USB cable and plug it back in while holding the ESC key on the keyboard. + +--- + +Make example for this keyboard (after setting up your build environment): + + make maartenwut/wasdat_code:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/maartenwut/wasdat_code/rules.mk b/keyboards/maartenwut/wasdat_code/rules.mk new file mode 100644 index 0000000000..642f8dc514 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs + +CUSTOM_MATRIX = lite +SRC += matrix.c + +LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso diff --git a/keyboards/maartenwut/wasdat_code/wasdat_code.c b/keyboards/maartenwut/wasdat_code/wasdat_code.c new file mode 100644 index 0000000000..044439fb51 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/wasdat_code.c @@ -0,0 +1,47 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "wasdat_code.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(B1); + setPinOutput(B2); + setPinOutput(B3); + writePinHigh(B1); + writePinHigh(B2); + writePinHigh(B3); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(B1, !led_state.caps_lock); + writePin(B2, !led_state.scroll_lock); + writePin(B3, !led_state.num_lock); + } + + return true; +} diff --git a/keyboards/maartenwut/wasdat_code/wasdat_code.h b/keyboards/maartenwut/wasdat_code/wasdat_code.h new file mode 100644 index 0000000000..5b3ed20913 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/wasdat_code.h @@ -0,0 +1,107 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all LAYOUT_fullsize_iso + +#define LAYOUT_fullsize_ansi( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, k78, k77, k76, k56, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k1b, k68, k3e, k36, k48, k47, k46, k4e, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k7b, k28, k27, k26, \ + k29, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, k18, k17, k16, k1e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57, k07, k06 \ +) \ +{ \ + { k00, XXX, k02, k03, XXX, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX, k4a, XXX, k4c, k4d, k4e, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, k56, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, k76, k77, k78, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} + +#define LAYOUT_fullsize_iso( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, k78, k77, k76, k56, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k68, k3e, k36, k48, k47, k46, k4e, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k1b, k7b, k28, k27, k26, \ + k29, k04, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, k18, k17, k16, k1e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57, k07, k06 \ +) \ +{ \ + { k00, XXX, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, XXX, k4a, XXX, k4c, k4d, k4e, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, k56, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, k76, k77, k78, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} + +#define LAYOUT_tkl_ansi( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k1b, k68, k3e, k36, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k7b, \ + k29, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57 \ +) \ +{ \ + { k00, XXX, k02, k03, XXX, k05, XXX, XXX, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, XXX, XXX, XXX, k19, k1a, k1b, k1c, k1d, XXX, k1f }, \ + { k20, k21, k22, k23, k24, k25, XXX, XXX, XXX, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, XXX, XXX, XXX, XXX, k4a, XXX, k4c, k4d, XXX, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, XXX, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, XXX, XXX, XXX, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} + +#define LAYOUT_tkl_iso( \ + k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ + k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, \ + k25, k45, k44, k42, k40, k20, k2a, k4a, k4c, k4f, k4d, k2d, k2c, k68, k3e, k36, \ + k24, k15, k14, k12, k10, k00, k0a, k1a, k1c, k1f, k1d, k0d, k1b, k7b, \ + k29, k04, k75, k74, k72, k70, k50, k5a, k7a, k7c, k7f, k5d, k19, k0e, \ + k61, k21, k03, k08, k53, k11, k23, k71, k5e, k58, k57 \ +) \ +{ \ + { k00, XXX, k02, k03, k04, k05, XXX, XXX, k08, XXX, k0a, k0b, k0c, k0d, k0e, XXX }, \ + { k10, k11, k12, XXX, k14, k15, XXX, XXX, XXX, k19, k1a, k1b, k1c, k1d, XXX, k1f }, \ + { k20, k21, k22, k23, k24, k25, XXX, XXX, XXX, k29, k2a, k2b, k2c, k2d, XXX, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, XXX, XXX, XXX, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, XXX, XXX, XXX, XXX, k4a, XXX, k4c, k4d, XXX, k4f }, \ + { k50, XXX, XXX, k53, XXX, XXX, XXX, k57, k58, XXX, k5a, k5b, XXX, k5d, k5e, XXX }, \ + { k60, k61, k62, XXX, k64, k65, k66, k67, k68, XXX, k6a, k6b, k6c, k6d, k6e, k6f }, \ + { k70, k71, k72, XXX, k74, k75, XXX, XXX, XXX, XXX, k7a, k7b, k7c, XXX, XXX, k7f } \ +} diff --git a/keyboards/sirius/uni660/info.json b/keyboards/sirius/uni660/info.json deleted file mode 100644 index 296626d06a..0000000000 --- a/keyboards/sirius/uni660/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Uni660", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 5.75, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0.75}, {"x":1, "y":0.25}, {"x":2, "y":0}, {"x":3, "y":0.25}, {"x":4, "y":0.125}, {"x":7, "y":0.125}, {"x":8, "y":0.25}, {"x":9, "y":0}, {"x":10, "y":0.25}, {"x":11, "y":0.75}, {"x":0, "y":1.75}, {"x":1, "y":1.25}, {"x":2, "y":1}, {"x":3, "y":1.25}, {"x":4, "y":1.125}, {"x":7, "y":1.125}, {"x":8, "y":1.25}, {"x":9, "y":1}, {"x":10, "y":1.25}, {"x":11, "y":1.75}, {"x":0, "y":2.75}, {"x":1, "y":2.25}, {"x":2, "y":2}, {"x":3, "y":2.25}, {"x":4, "y":2.125}, {"x":7, "y":2.125}, {"x":8, "y":2.25}, {"x":9, "y":2}, {"x":10, "y":2.25}, {"x":11, "y":2.75}, {"x":1.5, "y":3.75}, {"x":2.5, "y":3.75}, {"x":3.5, "y":3.75}, {"x":4.5, "y":3.75}, {"x":6.5, "y":3.75}, {"x":7.5, "y":3.75}, {"x":8.5, "y":3.75}, {"x":9.5, "y":3.75}, {"x":1.5, "y":4.75}, {"x":2.5, "y":4.75}, {"x":3.5, "y":4.75}, {"x":4.5, "y":4.75}, {"x":6.5, "y":4.75}, {"x":7.5, "y":4.75}, {"x":8.5, "y":4.75}, {"x":9.5, "y":4.75}] - } - } -} diff --git a/keyboards/sirius/uni660/readme.md b/keyboards/sirius/uni660/readme.md index c3d2dbc1b3..4a45c6276f 100644 --- a/keyboards/sirius/uni660/readme.md +++ b/keyboards/sirius/uni660/readme.md @@ -6,7 +6,11 @@ Join the KeyCommerce [Discord](https://discord.gg/GJ8bdM) Make example: - make sirius/uni660:default +``` +qmk compile -kb sirius/uni660/rev1 -km default +qmk compile -kb sirius/uni660/rev2/ansi -km default +qmk compile -kb sirius/uni660/rev2/iso -km default +``` See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sirius/uni660/config.h b/keyboards/sirius/uni660/rev1/config.h index 06f1c78100..06f1c78100 100644 --- a/keyboards/sirius/uni660/config.h +++ b/keyboards/sirius/uni660/rev1/config.h diff --git a/keyboards/sirius/uni660/rev1/info.json b/keyboards/sirius/uni660/rev1/info.json new file mode 100644 index 0000000000..aa6b01cdf0 --- /dev/null +++ b/keyboards/sirius/uni660/rev1/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Uni660", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"@", "x":3.5, "y":0}, {"label":"#", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":2}, {"label":"Insert", "x":18, "y":0}, {"label":"F1", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"|", "x":16, "y":1, "w":1.5}, {"label":"Delete", "x":18, "y":1}, {"label":"F2", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2.25}, {"label":"F3", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":2.25}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":2.25}, {"label":"Up", "x":17, "y":3}, {"label":"F4", "x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Win", "x":2.75, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"x":5.25, "y":4, "w":2.25}, {"label":"Fn", "x":7.5, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Menu", "x":13.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":14.75, "y":4, "w":1.25}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/sirius/uni660/keymaps/default/keymap.c b/keyboards/sirius/uni660/rev1/keymaps/default/keymap.c index 336aa84108..336aa84108 100644 --- a/keyboards/sirius/uni660/keymaps/default/keymap.c +++ b/keyboards/sirius/uni660/rev1/keymaps/default/keymap.c diff --git a/keyboards/sirius/uni660/keymaps/via/keymap.c b/keyboards/sirius/uni660/rev1/keymaps/via/keymap.c index 61bac7e4d5..61bac7e4d5 100644 --- a/keyboards/sirius/uni660/keymaps/via/keymap.c +++ b/keyboards/sirius/uni660/rev1/keymaps/via/keymap.c diff --git a/keyboards/sirius/uni660/rev1/keymaps/via/rules.mk b/keyboards/sirius/uni660/rev1/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sirius/uni660/rev1/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sirius/uni660/rev1/rev1.h b/keyboards/sirius/uni660/rev1/rev1.h new file mode 100644 index 0000000000..22397b48b1 --- /dev/null +++ b/keyboards/sirius/uni660/rev1/rev1.h @@ -0,0 +1,23 @@ +#pragma once + +#include "uni660.h" + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ + k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ + k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ + k30, k31, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ +) \ + { \ + { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, KC_NO, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ + } diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/sirius/uni660/rev1/rules.mk diff --git a/keyboards/sirius/uni660/rev2/ansi/ansi.h b/keyboards/sirius/uni660/rev2/ansi/ansi.h new file mode 100644 index 0000000000..3e21b5c843 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/ansi.h @@ -0,0 +1,24 @@ +#pragma once + +#include "uni660.h" + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ + k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ + k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ + k30, k31, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ +) \ + { \ + { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, KC_NO, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ + } diff --git a/keyboards/sirius/uni660/rev2/ansi/config.h b/keyboards/sirius/uni660/rev2/ansi/config.h new file mode 100644 index 0000000000..0032f61ccd --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0x5352 // "SR" +#define PRODUCT_ID 0x0202 // Second Product Second Version +#define DEVICE_VER 0x2004 // 2020.12 +#define MANUFACTURER SiRius +#define PRODUCT SiRius Uni660 V2 +#define DESCRIPTION SiRius Uni660 V2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/ansi/info.json b/keyboards/sirius/uni660/rev2/ansi/info.json new file mode 100644 index 0000000000..08d21d0775 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Uni660", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"@", "x":3.5, "y":0}, {"label":"#", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":2}, {"label":"Insert", "x":18, "y":0}, {"label":"F1", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"|", "x":16, "y":1, "w":1.5}, {"label":"Delete", "x":18, "y":1}, {"label":"F2", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2.25}, {"label":"F3", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":2.25}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":2.25}, {"label":"Up", "x":17, "y":3}, {"label":"F4", "x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Win", "x":2.75, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"x":5.25, "y":4, "w":2.25}, {"label":"Fn", "x":7.5, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Menu", "x":13.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":14.75, "y":4, "w":1.25}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/sirius/uni660/rev2/ansi/keymaps/default/keymap.c b/keyboards/sirius/uni660/rev2/ansi/keymaps/default/keymap.c new file mode 100644 index 0000000000..ff45e7f2b7 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ansi( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +}; diff --git a/keyboards/sirius/uni660/rev2/ansi/keymaps/via/keymap.c b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/keymap.c new file mode 100644 index 0000000000..26ec43d478 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/keymap.c @@ -0,0 +1,35 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ansi( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), + +[1] = LAYOUT_ansi( /* Layer 1 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[2] = LAYOUT_ansi( /* Layer 2 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[3] = LAYOUT_ansi( /* Layer 3 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +}; diff --git a/keyboards/sirius/uni660/rev2/ansi/keymaps/via/rules.mk b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sirius/uni660/rev2/ansi/rules.mk b/keyboards/sirius/uni660/rev2/ansi/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/rules.mk diff --git a/keyboards/sirius/uni660/rev2/iso/config.h b/keyboards/sirius/uni660/rev2/iso/config.h new file mode 100644 index 0000000000..e31f8fb8eb --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0x5352 // "SR" +#define PRODUCT_ID 0x0203 // Second Product Third Version +#define DEVICE_VER 0x2004 // 2020.12 +#define MANUFACTURER SiRius +#define PRODUCT SiRius Uni660 V2 +#define DESCRIPTION SiRius Uni660 V2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/iso/info.json b/keyboards/sirius/uni660/rev2/iso/info.json new file mode 100644 index 0000000000..cd32c73690 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Uni660", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT_iso": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"\u00ac", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"\"", "x":3.5, "y":0}, {"label":"\u00a3", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":2}, {"label":"Insert", "x":18, "y":0}, {"label":"F1", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"Enter", "x":16.25, "y":1, "w":1.25, "h":2}, {"label":"Delete", "x":18, "y":1}, {"label":"F2", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"@", "x":14.25, "y":2}, {"label":"~", "x":15.25, "y":2}, {"label":"F3", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":1.25}, {"label":"|", "x":2.75, "y":3}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":2.25}, {"label":"Up", "x":17, "y":3}, {"label":"F4", "x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Win", "x":2.75, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"x":5.25, "y":4, "w":2.25}, {"label":"Fn", "x":7.5, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Menu", "x":13.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":14.75, "y":4, "w":1.25}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/sirius/uni660/rev2/iso/iso.h b/keyboards/sirius/uni660/rev2/iso/iso.h new file mode 100644 index 0000000000..b38bdfc932 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/iso.h @@ -0,0 +1,24 @@ +#pragma once + +#include "uni660.h" + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ + k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ + k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ + k30, k31, k37, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ +) \ + { \ + { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ + } diff --git a/keyboards/sirius/uni660/rev2/iso/keymaps/default/keymap.c b/keyboards/sirius/uni660/rev2/iso/keymaps/default/keymap.c new file mode 100644 index 0000000000..de8630eaa6 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_iso( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +}; diff --git a/keyboards/sirius/uni660/rev2/iso/keymaps/via/keymap.c b/keyboards/sirius/uni660/rev2/iso/keymaps/via/keymap.c new file mode 100644 index 0000000000..ac1d7c6d59 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/keymaps/via/keymap.c @@ -0,0 +1,35 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_iso( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), + +[1] = LAYOUT_iso( /* Layer 1 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[2] = LAYOUT_iso( /* Layer 2 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[3] = LAYOUT_iso( /* Layer 3 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +}; diff --git a/keyboards/sirius/uni660/rev2/iso/keymaps/via/rules.mk b/keyboards/sirius/uni660/rev2/iso/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sirius/uni660/rev2/iso/rules.mk b/keyboards/sirius/uni660/rev2/iso/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/rules.mk diff --git a/keyboards/sirius/uni660/rules.mk b/keyboards/sirius/uni660/rules.mk index 920d8a83dd..243916fa76 100644 --- a/keyboards/sirius/uni660/rules.mk +++ b/keyboards/sirius/uni660/rules.mk @@ -30,3 +30,4 @@ UNICODE_ENABLE = yes # Unicode # project specific files SRC += matrix.c + diff --git a/keyboards/sirius/uni660/uni660.h b/keyboards/sirius/uni660/uni660.h index 81743adbd8..75813db7bd 100644 --- a/keyboards/sirius/uni660/uni660.h +++ b/keyboards/sirius/uni660/uni660.h @@ -2,6 +2,14 @@ #include "quantum.h" +#ifdef KEYBOARD_sirius_uni660_rev1 + #include "rev1.h" +#elif KEYBOARD_sirius_uni660_rev2_iso + #include "iso.h" +#elif KEYBOARD_sirius_uni660_rev2_ansi + #include "ansi.h" +#endif + #define red_led_off writePinHigh(F5) #define red_led_on writePinLow(F5) #define blu_led_off writePinHigh(F4) @@ -41,21 +49,3 @@ #define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) #define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) */ - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ - k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ - k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ - k30, k31, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ - k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ -) \ - { \ - { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ - { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ - { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ - { k30, k31, k32, k33, k34, k35, k36, KC_NO, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ - { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ - } diff --git a/keyboards/wete/keymaps/via/config.h b/keyboards/wete/keymaps/via/config.h new file mode 100644 index 0000000000..4dadf6a169 --- /dev/null +++ b/keyboards/wete/keymaps/via/config.h @@ -0,0 +1 @@ +#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047 diff --git a/keyboards/wete/keymaps/via/keymap.c b/keyboards/wete/keymaps/via/keymap.c new file mode 100644 index 0000000000..0f1a0bedb1 --- /dev/null +++ b/keyboards/wete/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi_rhnp( + KC_INSERT, KC_PSCREEN, KC_PAUSE, KC_SLCK, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_KP_4, KC_KP_5, KC_KP_6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_KP_0, KC_KP_DOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_ansi_rhnp( + KC_NO, KC_NO, KC_NO, KC_NO, BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_INC, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, BL_OFF, BL_DEC, BL_ON + ), + [2] = LAYOUT_ansi_rhnp( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO + ), + [3] = LAYOUT_ansi_rhnp( + KC_NO, KC_NO, KC_NO, KC_NO, BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO + ) +}; diff --git a/keyboards/wete/keymaps/via/rules.mk b/keyboards/wete/keymaps/via/rules.mk new file mode 100644 index 0000000000..ee1e4ceeb4 --- /dev/null +++ b/keyboards/wete/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +BOOTMAGIC_ENABLE = lite diff --git a/keyboards/wete/wete.h b/keyboards/wete/wete.h index e9f44e185d..46daf6d6f1 100644 --- a/keyboards/wete/wete.h +++ b/keyboards/wete/wete.h @@ -16,14 +16,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ANSI layout @@ -37,14 +37,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k51, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k51, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ANSI layout @@ -58,14 +58,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } @@ -82,14 +82,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ISO layout @@ -104,14 +104,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k51, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k51, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ISO layout @@ -126,14 +126,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } //////////////////////////////// JIS //////////////////////////////// diff --git a/keyboards/yd60mq/info.json b/keyboards/yd60mq/info.json index 816d653bce..60a62af7aa 100644 --- a/keyboards/yd60mq/info.json +++ b/keyboards/yd60mq/info.json @@ -144,6 +144,77 @@ {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25} ] + }, + "LAYOUT_60_iso": { + "key_count": 62, + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] } } } diff --git a/keyboards/yd60mq/keymaps/iso/keymap.c b/keyboards/yd60mq/keymaps/iso/keymap.c new file mode 100644 index 0000000000..9a4debed77 --- /dev/null +++ b/keyboards/yd60mq/keymaps/iso/keymap.c @@ -0,0 +1,28 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + //,: Base Layer + [0] = LAYOUT_60_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, LT(1,KC_RGHT) + ), + + //,: Function Layer + [1] = LAYOUT_60_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_HOME, KC_PSCR, + KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, RGB_HUI, RGB_SAI, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_END, XXXXXXX, KC_MNXT, + KC_TRNS, RGB_MOD, RGB_RMOD, RGB_VAI, RGB_VAD, RGB_HUD, RGB_SAD, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, + KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_SPI, RGB_SPD, XXXXXXX, KC_TRNS + ) + +};
\ No newline at end of file diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk index 98b13aca43..6619c187f4 100644 --- a/keyboards/yd60mq/rules.mk +++ b/keyboards/yd60mq/rules.mk @@ -31,6 +31,6 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs -LAYOUTS = 60_ansi +LAYOUTS = 60_ansi 60_iso DEFAULT_FOLDER = yd60mq/12led diff --git a/keyboards/yd60mq/yd60mq.h b/keyboards/yd60mq/yd60mq.h index 0f6fde9657..6b3824baa3 100644 --- a/keyboards/yd60mq/yd60mq.h +++ b/keyboards/yd60mq/yd60mq.h @@ -30,4 +30,19 @@ { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C, K4D, KC_NO } \ } +#define LAYOUT_60_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K1d, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3d, \ + K40, K41, K42, K47, K49, K4A, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, KC_NO, }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K1d }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, KC_NO, K3d, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C, K4D, KC_NO } \ +} + + #define LAYOUT LAYOUT_all |