diff options
Diffstat (limited to 'keyboards')
58 files changed, 2362 insertions, 372 deletions
diff --git a/keyboards/coseyfannitutti/mullet/config.h b/keyboards/coseyfannitutti/mullet/config.h new file mode 100644 index 0000000000..527294e51a --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/config.h @@ -0,0 +1,172 @@ +/* +Copyright 2019 COSEYFANNITUTTI + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6969 +#define DEVICE_VER 0x0001 +#define MANUFACTURER coseyfannitutti +#define PRODUCT mullet +#define DESCRIPTION 65% keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, B0, F0, F1 } +#define MATRIX_COL_PINS { B2, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D2, D3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN D5 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 14 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + diff --git a/keyboards/coseyfannitutti/mullet/info.json b/keyboards/coseyfannitutti/mullet/info.json new file mode 100644 index 0000000000..a608886333 --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "mullet", + "url": "https://github.com/coseyfannitutti/mullet", + "maintainer": "coseyfannitutti", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Page Up", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Page Down", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/coseyfannitutti/mullet/keymaps/alternate/keymap.c b/keyboards/coseyfannitutti/mullet/keymaps/alternate/keymap.c new file mode 100644 index 0000000000..21ca2ffb63 --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/keymaps/alternate/keymap.c @@ -0,0 +1,68 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define _BL 0 +#define _FL 1 + + /* Qwerty + * .---------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Del | + * |---------------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | PgUp| + * |---------------------------------------------------------------------------------------------+ + * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | PgDn| + * |---------------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Up | Fn | + * |---------------------------------------------------------------------------------------------+ + * | Ctrl | Win | Alt | Space | RAlt | Fn |||||Left |Down |Right| + * '---------------------------------------------------------------------------------------------' + */ + + /* FnLayer + * .---------------------------------------------------------------------------------------------. + * | ` ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Delete | | + * |---------------------------------------------------------------------------------------------+ + * | Tab |STATC|BRTHE|RNBOW|RESET| | | | | | |PrScr| | \ | Home| + * |---------------------------------------------------------------------------------------------+ + * | Caps |RGBH+|RGBS+|RGBB+| | | | | | | | | Enter | End | + * |---------------------------------------------------------------------------------------------+ + * | Shift |RGBH-|RGBS-|RGBB-| | | | |RGBM-|RGBM+|RGBTG| Shift |VolUp| | + * |---------------------------------------------------------------------------------------------+ + * | Ctrl | Win | Alt | | RAlt | Fn ||||| |VolDn| | + * '---------------------------------------------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BL] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(_FL), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT), + + [_FL] = LAYOUT( + /* esc 1 2 3 4 5 6 7 8 9 0 - = bkspc delete */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, + /* tab Q W E R T Y U I O P [ ] \ pg up */ + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_BSLS, KC_HOME, + /* caps A S D F G H J K L ; ' enter pg dn */ + KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_END, + /* shift Z X C V B N M , . / shift up fn */ + KC_LSFT, RGB_HUD, RGB_SAD, RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,RGB_RMOD, RGB_MOD, RGB_TOG, KC_RSFT, KC_VOLU, KC_TRNS, + /* ctrl win alt space alt fn left down right */ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS) +}; diff --git a/keyboards/coseyfannitutti/mullet/keymaps/default/keymap.c b/keyboards/coseyfannitutti/mullet/keymaps/default/keymap.c new file mode 100644 index 0000000000..07d939dfdc --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/keymaps/default/keymap.c @@ -0,0 +1,68 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define _BL 0 +#define _FL 1 + + /* Qwerty + * .---------------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | + * |---------------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | + * |---------------------------------------------------------------------------------------------+ + * | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | PgUp| + * |---------------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | U | Pgdn| + * |---------------------------------------------------------------------------------------------+ + * | Ctrl | Win | Alt | Space | RAlt | FN ||||| L | D | R | + * '---------------------------------------------------------------------------------------------' + */ + + /* FnLayer + * .---------------------------------------------------------------------------------------------. + * | ` ~ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | DELETE |PNTSC| + * |---------------------------------------------------------------------------------------------+ + * | Tab |STATC|BRTHE|RNBOW|RESET| | | | | | |PAUSE| | \ | | + * |---------------------------------------------------------------------------------------------+ + * | Caps |RGBH+|RGBS+|RGBB+| | | | | | | | INS | Enter | HOME| + * |---------------------------------------------------------------------------------------------+ + * | Shift |RGBH-|RGBS-|RGBB-| | | | |RGBM-|RGBM+|RGBTG| Shift |VOLUP| END | + * |---------------------------------------------------------------------------------------------+ + * | Ctrl | Win | Alt | | RAlt | FN ||||| L |VOLDN| R | + * '---------------------------------------------------------------------------------------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BL] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT), + + [_FL] = LAYOUT( + /* esc 1 2 3 4 5 6 7 8 9 0 - = bkspc insert*/ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, + /* tab Q W E R T Y U I O P [ ] \ delete*/ + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAUS, KC_BSLS, KC_TRNS, + /* caps A S D F G H J K L ; ' enter pg up*/ + KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, + /* shift Z X C V B N M , . / shift up pg dn*/ + KC_LSFT, RGB_HUD, RGB_SAD, RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE,RGB_RMOD, RGB_MOD, RGB_TOG, KC_RSFT, KC_VOLU, KC_END, + /* ctrl win alt space alt fn left down right*/ + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_RALT, KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS) +}; diff --git a/keyboards/coseyfannitutti/mullet/mullet.c b/keyboards/coseyfannitutti/mullet/mullet.c new file mode 100644 index 0000000000..4f451f3dbb --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/mullet.c @@ -0,0 +1,23 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "mullet.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/coseyfannitutti/mullet/mullet.h b/keyboards/coseyfannitutti/mullet/mullet.h new file mode 100644 index 0000000000..848fd19226 --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/mullet.h @@ -0,0 +1,42 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define _x_ KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, _x_, K4A, K4B, K4C, K4D, K4E} \ +} diff --git a/keyboards/coseyfannitutti/mullet/readme.md b/keyboards/coseyfannitutti/mullet/readme.md new file mode 100644 index 0000000000..45c17fb5ba --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/readme.md @@ -0,0 +1,15 @@ +# mullet + +![mullet](https://i.imgur.com/EBOMbhH.jpg) + +A 68 key keyboard with USB Type-C and RGB underglow + +Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti) +Hardware Supported: Mullet, atmega32u4 +Hardware Availability: https://github.com/coseyfannitutti/mullet + +Make example for this keyboard (after setting up your build environment): + + make coseyfannitutti/mullet:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk new file mode 100644 index 0000000000..fa02fe6fce --- /dev/null +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/coseyfannitutti/mulletpad/config.h b/keyboards/coseyfannitutti/mulletpad/config.h new file mode 100644 index 0000000000..ad59410554 --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/config.h @@ -0,0 +1,172 @@ +/* +Copyright 2019 COSEYFANNITUTTI + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6666 +#define DEVICE_VER 0x0001 +#define MANUFACTURER coseyfannitutti +#define PRODUCT mulletpad +#define DESCRIPTION numpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F4, F1, F5, F6, F7 } +#define MATRIX_COL_PINS { F0, C7, C6, B6, } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +//#define RGB_DI_PIN D5 +//#ifdef RGB_DI_PIN +//#define RGBLIGHT_ANIMATIONS +//#define RGBLED_NUM 8 +//#define RGBLIGHT_HUE_STEP 8 +//#define RGBLIGHT_SAT_STEP 8 +//#define RGBLIGHT_VAL_STEP 8 +//#define RGBLIGHT_SLEEP +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + diff --git a/keyboards/coseyfannitutti/mulletpad/info.json b/keyboards/coseyfannitutti/mulletpad/info.json new file mode 100644 index 0000000000..1cfade20d1 --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "mulletpad", + "url": "https://github.com/coseyfannitutti/mulletpad", + "maintainer": "coseyfannitutti", + "width": 4, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"Enter", "x":3, "y":3, "h":2}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}] + } + } +} diff --git a/keyboards/coseyfannitutti/mulletpad/keymaps/default/keymap.c b/keyboards/coseyfannitutti/mulletpad/keymaps/default/keymap.c new file mode 100644 index 0000000000..ffdc1044df --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/keymaps/default/keymap.c @@ -0,0 +1,27 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define _BL 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BL] = LAYOUT_numpad_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT ) +}; diff --git a/keyboards/coseyfannitutti/mulletpad/mulletpad.c b/keyboards/coseyfannitutti/mulletpad/mulletpad.c new file mode 100644 index 0000000000..be335cc547 --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/mulletpad.c @@ -0,0 +1,23 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "mulletpad.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} diff --git a/keyboards/coseyfannitutti/mulletpad/mulletpad.h b/keyboards/coseyfannitutti/mulletpad/mulletpad.h new file mode 100644 index 0000000000..41c5c014a9 --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/mulletpad.h @@ -0,0 +1,42 @@ +/* Copyright 2019 COSEYFANNITUTTI + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define _x_ KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_numpad_5x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K23, \ + K30, K31, K32, \ + K40, K42, K43 \ +) { \ +{ K00, K01, K02, K03, }, \ +{ K10, K11, K12, _x_, }, \ +{ K20, K21, K22, K23, }, \ +{ K30, K31, K32, _x_, }, \ +{ K40, _x_, K42, K43, }, \ +} diff --git a/keyboards/coseyfannitutti/mulletpad/readme.md b/keyboards/coseyfannitutti/mulletpad/readme.md new file mode 100644 index 0000000000..9ee49ca96c --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/readme.md @@ -0,0 +1,15 @@ +# mulletpad + +![mulletpad](https://i.imgur.com/MHKo5f5.png) + +A 17-key numpad with USB Type-C. + +Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti) +Hardware Supported: Mulletpad, atmega32u4 +Hardware Availability: https://github.com/coseyfannitutti/mulletpad + +Make example for this keyboard (after setting up your build environment): + + make coseyfannitutti/mulletpad:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk new file mode 100644 index 0000000000..b3a473ef4b --- /dev/null +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -0,0 +1,82 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +LAYOUTS = numpad_5x4 diff --git a/keyboards/exclusive/e6v2/bmc/config.h b/keyboards/exclusive/e6v2/oe_bmc/config.h index 7c6fcccdb9..fc7c91ca66 100644 --- a/keyboards/exclusive/e6v2/bmc/config.h +++ b/keyboards/exclusive/e6v2/oe_bmc/config.h @@ -22,7 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 #define MANUFACTURER exclusive -#define PRODUCT e6v2 bmc +#define PRODUCT e6v2 oe bmc #define DESCRIPTION A custom 60% keyboard /* key matrix size */ diff --git a/keyboards/exclusive/e6v2/bmc/info.json b/keyboards/exclusive/e6v2/oe_bmc/info.json index aa6d171ba8..aa6d171ba8 100644 --- a/keyboards/exclusive/e6v2/bmc/info.json +++ b/keyboards/exclusive/e6v2/oe_bmc/info.json diff --git a/keyboards/exclusive/e6v2/bmc/keymaps/default/config.h b/keyboards/exclusive/e6v2/oe_bmc/keymaps/default/config.h index 26c6d6ade1..26c6d6ade1 100644 --- a/keyboards/exclusive/e6v2/bmc/keymaps/default/config.h +++ b/keyboards/exclusive/e6v2/oe_bmc/keymaps/default/config.h diff --git a/keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c b/keyboards/exclusive/e6v2/oe_bmc/keymaps/default/keymap.c index 7300419176..7300419176 100644 --- a/keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c +++ b/keyboards/exclusive/e6v2/oe_bmc/keymaps/default/keymap.c diff --git a/keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md b/keyboards/exclusive/e6v2/oe_bmc/keymaps/default/readme.md index 4a1b6efa62..4a1b6efa62 100644 --- a/keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md +++ b/keyboards/exclusive/e6v2/oe_bmc/keymaps/default/readme.md diff --git a/keyboards/exclusive/e6v2/bmc/bmc.c b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c index 257b68b8b4..5357550ae1 100644 --- a/keyboards/exclusive/e6v2/bmc/bmc.c +++ b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "bmc.h" +#include "oe_bmc.h" #include "rgblight.h" #include "i2c_master.h" diff --git a/keyboards/exclusive/e6v2/bmc/bmc.h b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.h index 44c02c8600..44c02c8600 100644 --- a/keyboards/exclusive/e6v2/bmc/bmc.h +++ b/keyboards/exclusive/e6v2/oe_bmc/oe_bmc.h diff --git a/keyboards/exclusive/e6v2/bmc/readme.md b/keyboards/exclusive/e6v2/oe_bmc/readme.md index b69ac792cf..a386abf6c0 100644 --- a/keyboards/exclusive/e6v2/bmc/readme.md +++ b/keyboards/exclusive/e6v2/oe_bmc/readme.md @@ -1,6 +1,6 @@ -# E6-V2 Bootmapper Client (ps2avrgb) +# E6-V2 Bootmapper Client (ps2avrgb) OE -These docs are for the BMC version of the E6-V2 PCB which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2. +These docs are for the BMC version of the E6-V2 PCB sold during Round 1 which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2 or your E6V2 BMC from Round 2. Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller @@ -8,7 +8,7 @@ Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.o Make example for this keyboard (after setting up your build environment): - make exclusive/e6v2/bmc:default + make exclusive/e6v2/oe_bmc:default Flashing diff --git a/keyboards/exclusive/e6v2/bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 885bce2453..885bce2453 100644 --- a/keyboards/exclusive/e6v2/bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk diff --git a/keyboards/exclusive/e6v2/bmc/usbconfig.h b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h index f22f2b631d..f22f2b631d 100644 --- a/keyboards/exclusive/e6v2/bmc/usbconfig.h +++ b/keyboards/exclusive/e6v2/oe_bmc/usbconfig.h diff --git a/keyboards/exclusive/e6v2/readme.md b/keyboards/exclusive/e6v2/readme.md index c09d1ccf1b..515db082e0 100644 --- a/keyboards/exclusive/e6v2/readme.md +++ b/keyboards/exclusive/e6v2/readme.md @@ -13,7 +13,7 @@ The E6-V2 is a 60% keyboard manufactured by Exclusive. These docs are for the QMK version of the E6-V2 PCB. [More info on qmk.fm](http://qmk.fm/) -The E6V2 has been available with either a bootmapper client or QMK powered PCB. During the second round, the QMK powered PCB was redesigned and used different ports and a different switch matrix. +The E6V2 has been available with either a Bootmapper Client or QMK-powered PCB. During the second round, the QMK-powered and BMC PCBs were redesigned, and used different ports and a different switch matrix. Please use the appropriate version when making your firmware. Flashing one in place of the other, can brick your PCB. Please be certain whether you have a OE or LE PCB. diff --git a/keyboards/nomu30/keymaps/like_jis/config.h b/keyboards/nomu30/keymaps/like_jis/config.h new file mode 100644 index 0000000000..8861dc5396 --- /dev/null +++ b/keyboards/nomu30/keymaps/like_jis/config.h @@ -0,0 +1,66 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +// place overrides here +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT + +#define TAPPING_LAYER_TERM 150 // Custom LT Tapping term +#define TAPPING_TERM_PER_KEY + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif + +// LED Setting: if you have KUMO you can use RGBLIGHT_ENABLE = yes +#ifdef RGBLIGHT_ENABLE + #define RGB_DI_PIN B5 + #define RGBLIGHT_TIMER + + #define RGBLED_NUM 6 +#endif diff --git a/keyboards/nomu30/keymaps/like_jis/keymap.c b/keyboards/nomu30/keymaps/like_jis/keymap.c new file mode 100644 index 0000000000..203d0a7a41 --- /dev/null +++ b/keyboards/nomu30/keymaps/like_jis/keymap.c @@ -0,0 +1,159 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + RGBRST = SAFE_RANGE, + LOWER, + RAISE, + KANJI, +}; + +// enum tapdances{ +// TD_CODO = 0, +// TD_SLRO, +// }; + +// Layer Mode aliases +#define KC_MLAD MO(_ADJUST) + +// Base layer mod tap +#define KC_CMSF LSFT_T(KC_COMM) +#define KC_DTCT LCTL_T(KC_DOT) +#define KC_Z_AL LALT_T(KC_Z) +#define KC_X_GU LGUI_T(KC_X) +#define KC_ENSF LSFT_T(KC_ENT) + +// Lower layer mod tap +#define KC_BSSF LSFT_T(KC_BSLS) +#define KC_11AL LALT_T(KC_F11) + +// Layer tap +#define KC_BSLO LT(_LOWER, KC_BSPC) +#define KC_SPRA LT(_RAISE, KC_SPC) + +// Tap dance +// #define KC_CODO TD(TD_CODO) +// #define KC_SLRO TD(TD_SLRO) + +// qk_tap_dance_action_t tap_dance_actions[] = { +// [TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT), +// [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +// }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLO, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_CMSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_DTCT, KC_Z_AL, KC_X_GU, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SPRA + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ), + + [_LOWER] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, _______, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, KC_SCLN, KC_QUOT, KC_BSSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, KC_11AL, KC_F12, KC_ESC, KC_TAB, KANJI, KC_COMM, KC_DOT, KC_MLAD + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ), + + [_RAISE] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_LSFT, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLSH, KC_RO, _______ + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ), + + [_ADJUST] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + RESET, RGBRST, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, XXXXXXX, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ) +}; + +uint16_t get_tapping_term(uint16_t keycode) { + switch (keycode) { + case KC_BSLO: + return TAPPING_LAYER_TERM; + case KC_SPRA: + return TAPPING_LAYER_TERM; + default: + return TAPPING_TERM; + } +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + bool result = false; + switch (keycode) { + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + return result; +} + +void keyboard_post_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif +} diff --git a/keyboards/nomu30/keymaps/like_jis/readme.md b/keyboards/nomu30/keymaps/like_jis/readme.md new file mode 100644 index 0000000000..ad64f06b15 --- /dev/null +++ b/keyboards/nomu30/keymaps/like_jis/readme.md @@ -0,0 +1,64 @@ +# The LikeJIS is Japanese Keyboard like keymap + +A Nomu30 can use full color LED strip used by B5 pin. This keymap can use LED animation option. + +## Keymap Description + +- KC_CMSF ...... , key is one tap, Shift key is long push. +- KC_DTCT ...... . key is one tap, Ctrl key is long tap. +- KC_ENSF ...... Enter key is one tap, Ctrl key is long tap. +- KC_Z_AL ...... Z key is one tap, Alt key is long tap. +- KC_X_GU ...... X key is one tap, GUI key is long tap. +- KC_BSLO ...... Backspace key is one tap, Move to Lower layer with long push. +- KC_SPRA ...... Space key is one tap, Move to Raise layer with. +- AG_NORM ...... If you use Mac set to mode. +- AG_SWAP ...... If you use Win set to mode. +- KANJI ...... Japanese IME toggle key. + +## How to move to Ajdust Layer + +At first, Move to Lower layer with long push. After that Adjust key with long push. Now you have into Adjust layer state. + +```c + + [_BASE] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLO, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_CMSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_DTCT, KC_Z_AL, KC_X_GU, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SPRA + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ), + + [_LOWER] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, _______, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, KC_SCLN, KC_QUOT, KC_BSSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, KC_11AL, KC_F12, KC_ESC, KC_TAB, KANJI, KC_COMM, KC_DOT, KC_MLAD + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ), + + [_RAISE] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_LSFT, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLSH, KC_RO, _______ + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ), + + [_ADJUST] = LAYOUT( + //,-----------------------------------------------------------------------------------------------------------------------. + RESET, RGBRST, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, XXXXXXX, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX + //`---------+---------+---------+---------+---------+---------+---------+---------+---------' + ) + +``` diff --git a/keyboards/nomu30/keymaps/like_jis/rules.mk b/keyboards/nomu30/keymaps/like_jis/rules.mk new file mode 100644 index 0000000000..b1a6026c2a --- /dev/null +++ b/keyboards/nomu30/keymaps/like_jis/rules.mk @@ -0,0 +1,26 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +TAP_DANCE_ENABLE = no + +# If your custom treadstone32 pcb, you can rewrite to yes. +RGBLIGHT_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/pearl/README.md b/keyboards/pearl/README.md deleted file mode 100644 index ec54ba80f5..0000000000 --- a/keyboards/pearl/README.md +++ /dev/null @@ -1,85 +0,0 @@ -# Pearl 40% - -Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel -ATMEGA32A MCU. - -## Compiling and flashing - -These instructions are for building and flashing your Pearl 40% without -Bootmapper Client. - -### Requirements - -#### Windows - -(to be written, help needed) - -#### Mac - -Apart from regular QMK and AVR dependencies you need to install -`bootloadHID`. You can install it with `homebrew` as follows: - - $ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -If you don't use `homebrew` you can try following the compiling -instructions defined below in the Linux section. - -#### Linux - -For Linux you require all regular QMK dependencies, but make sure you're -using `gcc-avr` version 4.9 or higher. 4.8 and lower do not contain the -proper definitions for ATMEGA32A MCUs and QMK will fail while attempting -to compile a HEX for Pearl 40%. - -E.g. you cannot compile Pearl 40% HEX on a regular Ubuntu 14.04 as -`gcc-avr` version is maxed to 4.8 on it. - -Additionally you need an operational `bootloadHID` binary. - -You can install `bootloadHID` by taking the following steps: - - $ git clone https://github.com/robertgzr/bootloadHID ~/tmp/bootloadHIDsrc - $ cd ~/tmp/bootloadHIDsrc/commandline - $ make VENDORID=0x16c0 PRODUCTID=0x05DF # vid and pid for atmega32a - $ chmod +x bootloadHID && cp bootloadHID /usr/bin/bootloadHID - -Running `which bootloadHID` should return `/usr/bin/bootloadHID`. - -### Compiling - -Enter the QMK root directory and compile a keymap with the following -command: - - $ make pearl:<keymap> - -where `<keymap>` is a layout directory under the `pearl` directory. - -QMK should compile a HEX (called `pearl_<keymap>.hex`) for you, which -you can flash using `bootloadHID`. - -### Flashing - -To enable Pearl 40% bootloading mode, unplug the keyboard, then plug it -in while holding `Esc` at the same time (the top-leftmost switch on the -PCB, next to the USB connector). Once the board is in bootload mode, -issue the following command (you might require `sudo` to perform the -command): - - # assuming we're still in the QMK root dir where you compiled a HEX into - $ bootloadHID -r ./pearl_<keymap>.hex - -You should see something similar to - - > Page size = <value> - > Device size = <value>; <value> remaining - > Uploading <value> bytes starting at 0 (0x0) - > <value> ... <current value> - -where `<current value>` should be slowly increasing as the HEX is being -flashed to the board. If there is some warning about `resource busy` it -should still work OK. - -Once done the board underglow should turn red and the new firmware has -been flashed. If you can't type on the board try plugging it in again -(without holding any keys to prevent accidentally setting it into -bootload mode again). diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 6edf170d97..00850b8f09 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -35,8 +35,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 4 #define MATRIX_COLS 13 -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6} +#define MATRIX_ROW_PINS { B0, B1, B2, B3 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3} #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/pearl/i2c.c b/keyboards/pearl/i2c.c deleted file mode 100644 index a4f9521352..0000000000 --- a/keyboards/pearl/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -// Please do not modify this file - -#include <avr/io.h> -#include <util/twi.h> - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the start condition was successfully transmitted - if ((TWSR & 0xF8) != TW_START) { - return 1; - } - - // transmit address and wait - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return 1; - } - - return 0; -} - -void i2c_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); -} - -uint8_t i2c_write(uint8_t data) { - TWDR = data; - - // transmit data and wait - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { - return 1; - } - - return 0; -} - -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { - if (i2c_start(address)) { - return 1; - } - - for (uint16_t i = 0; i < length; i++) { - if (i2c_write(data[i])) { - return 1; - } - } - - i2c_stop(); - - return 0; -} diff --git a/keyboards/pearl/i2c.h b/keyboards/pearl/i2c.h deleted file mode 100644 index 93a69c94da..0000000000 --- a/keyboards/pearl/i2c.h +++ /dev/null @@ -1,27 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/pearl/matrix.c b/keyboards/pearl/matrix.c deleted file mode 100644 index 57aa36b5ff..0000000000 --- a/keyboards/pearl/matrix.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/delay.h> - -#include "matrix.h" - -#ifndef DEBOUNCE -#define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<<PIND7); - // all columns are pulled-up - PORTA = 0xFF; - PORTC |= (0b111111<<2); - PORTD |= (1<<PIND7); - - // initialize matrix state: all keys off - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0x00; - matrix_debouncing[row] = 0x00; - } -} - -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c index 3bbadb0a7f..c8cd8a8609 100644 --- a/keyboards/pearl/pearl.c +++ b/keyboards/pearl/pearl.c @@ -15,16 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "pearl.h" #include "rgblight.h" -#include "backlight.h" - -#include <avr/pgmspace.h> - -#include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" +#ifdef RGBLIGHT_ENABLE extern rgblight_config_t rgblight_config; void rgblight_set(void) { @@ -37,23 +32,59 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); } +#endif -void backlight_init_ports(void) { - DDRD |= (1<<4); - PORTD &= ~(1<<4); +void matrix_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + if (rgblight_config.enable) { + i2c_init(); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); + } +#endif + // call user level keymaps, if any + matrix_init_user(); } -void backlight_set(uint8_t level) { - if (level > 0) { - PORTD |= (1<<4); - } else { - PORTD &= ~(1<<4); - } +void matrix_scan_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif + matrix_scan_user(); + /* Nothing else for now. */ } __attribute__ ((weak)) void matrix_scan_user(void) { - rgblight_task(); } + +void backlight_init_ports(void) { + // initialize pins D0, D1, D4 and D6 as output + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); +} + +void backlight_set(uint8_t level) { + if (level == 0) { + // turn backlight LEDs off + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } +}
\ No newline at end of file diff --git a/keyboards/pearl/pearl.h b/keyboards/pearl/pearl.h index 6f5fbce5db..72df1595de 100644 --- a/keyboards/pearl/pearl.h +++ b/keyboards/pearl/pearl.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef PEARL_H -#define PEARL_H +#pragma once #include "quantum.h" #include "pearl.h" @@ -56,6 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO}, \ { K30, K31, KC_NO, KC_NO, KC_NO, K35, KC_NO, KC_NO, KC_NO, K39, K3A, KC_NO, KC_NO}, \ } - - -#endif diff --git a/keyboards/pearl/readme.md b/keyboards/pearl/readme.md new file mode 100644 index 0000000000..c39d86cf3d --- /dev/null +++ b/keyboards/pearl/readme.md @@ -0,0 +1,47 @@ +# Pearl 40% + +Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel +ATMEGA32A MCU. + +Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) +Hardware Supported: Pearl +Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0) + +Make example for this keyboard (after setting up your build environment): + + make pearl:default + +Flashing + +ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + +**Reset Key:** Hold down the key located at `K00`. + +Windows: +1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +2. Place your keyboard into reset. +3. Press the `Find Device` button and ensure that your keyboard is found. +4. Press the `Open .hex File` button and locate the `.hex` file you created. +5. Press the `Flash Device` button and wait for the process to complete. + +macOS: +1. Install homebrew by typing the following: + ``` + /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + ``` +2. Install `crosspack-avr`. + ``` + brew cask install crosspack-avr + ``` +3. Install the following packages: + ``` + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + ``` +4. Place your keyboard into reset. +5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. + +**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index fac85172ec..4db92d1219 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -31,7 +31,7 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = full +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes @@ -43,8 +43,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h index d2d848fcdc..54a7d20f14 100644 --- a/keyboards/pearl/usbconfig.h +++ b/keyboards/pearl/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/keyboards/rgbkb/sol/rev1/config.h b/keyboards/rgbkb/sol/rev1/config.h index 056869daa0..51c4bbb65b 100644 --- a/keyboards/rgbkb/sol/rev1/config.h +++ b/keyboards/rgbkb/sol/rev1/config.h @@ -32,3 +32,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLED_NUM 70 #endif #define DRIVER_LED_TOTAL RGBLED_NUM + +#define RGB_MATRIX_CENTER { 112, 35 } diff --git a/keyboards/rgbkb/sol/rev1/rev1.c b/keyboards/rgbkb/sol/rev1/rev1.c index 68e64af79e..6ee4b610b3 100644 --- a/keyboards/rgbkb/sol/rev1/rev1.c +++ b/keyboards/rgbkb/sol/rev1/rev1.c @@ -16,17 +16,17 @@ led_config_t g_led_config = { { { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 68, 68 } }, { // Left Hand Mapped Left to Right - { 0, 0 }, { 22, 0 }, { 37, 0 }, { 37, 0 }, { 67, 0 }, { 82, 0 }, { 104, 0 }, - { 0, 16 }, { 22, 16 }, { 37, 16 }, { 37, 16 }, { 67, 16 }, { 82, 16 }, { 104, 16 }, - { 0, 32 }, { 22, 32 }, { 37, 32 }, { 37, 32 }, { 67, 32 }, { 82, 32 }, { 104, 32 }, - { 0, 48 }, { 22, 48 }, { 37, 48 }, { 37, 48 }, { 67, 48 }, { 82, 48 }, { 104, 48 }, - { 0, 64 }, { 22, 64 }, { 37, 64 }, { 37, 64 }, { 67, 64 }, { 89, 45 }, { 97, 55 }, + { 0, 0 }, { 21, 0 }, { 38, 0 }, { 56, 0 }, { 73, 0 }, { 91, 0 }, { 112, 0 }, + { 0, 18 }, { 21, 18 }, { 38, 18 }, { 56, 18 }, { 73, 18 }, { 91, 18 }, { 108, 13 }, + { 0, 35 }, { 21, 35 }, { 38, 35 }, { 56, 35 }, { 73, 35 }, { 91, 35 }, { 108, 31 }, + { 0, 52 }, { 21, 52 }, { 38, 52 }, { 56, 52 }, { 73, 52 }, { 91, 52 }, { 108, 48 }, + { 0, 70 }, { 21, 70 }, { 38, 70 }, { 56, 70 }, { 73, 70 }, { 89, 91 }, { 101, 103 }, // Left Hand Mapped Right to Left - { 224, 0 }, { 202, 0 }, { 187, 0 }, { 172, 0 }, { 157, 0 }, { 142, 0 }, { 120, 0 }, - { 224, 16 }, { 202, 16 }, { 187, 16 }, { 172, 16 }, { 157, 16 }, { 142, 16 }, { 120, 16 }, - { 224, 32 }, { 202, 32 }, { 187, 32 }, { 172, 32 }, { 157, 32 }, { 142, 32 }, { 120, 32 }, - { 224, 48 }, { 202, 48 }, { 187, 48 }, { 172, 48 }, { 157, 48 }, { 142, 48 }, { 120, 48 }, - { 224, 64 }, { 202, 64 }, { 187, 64 }, { 172, 64 }, { 157, 64 }, { 135, 45 }, { 127, 55 } + { 224, 0 }, { 203, 0 }, { 186, 0 }, { 168, 0 }, { 151, 0 }, { 133, 0 }, { 112, 0 }, + { 224, 18 }, { 203, 18 }, { 186, 18 }, { 168, 18 }, { 151, 18 }, { 133, 18 }, { 116, 13 }, + { 224, 35 }, { 203, 35 }, { 186, 35 }, { 168, 35 }, { 151, 35 }, { 133, 35 }, { 116, 31 }, + { 224, 52 }, { 203, 52 }, { 186, 52 }, { 168, 52 }, { 151, 52 }, { 133, 52 }, { 116, 48 }, + { 224, 70 }, { 203, 70 }, { 186, 70 }, { 168, 70 }, { 151, 70 }, { 135, 91 }, { 123, 103 }, }, { // Left Hand Mapped Left to Right 1, 4, 4, 4, 4, 4, 1, diff --git a/keyboards/treadstone32/config.h b/keyboards/treadstone32/config.h new file mode 100644 index 0000000000..6151d6e829 --- /dev/null +++ b/keyboards/treadstone32/config.h @@ -0,0 +1,103 @@ +/* +Copyright 2019 marksard + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xDFA5 +#define DEVICE_VER 0x0010 +#define MANUFACTURER marksard +#define PRODUCT treadstone32 +#define DESCRIPTION Minimal Symmetrical staggered 32-Key Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F1, F0, E6, B2, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, C7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +#define RGBLED_NUM 6 + +#ifndef IOS_DEVICE_ENABLE + #define RGBLIGHT_LIMIT_VAL 200 + #define RGBLIGHT_VAL_STEP 17 +#else + #define RGBLIGHT_LIMIT_VAL 50 + #define RGBLIGHT_VAL_STEP 4 +#endif +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) +// USB_MAX_POWER_CONSUMPTION value for treadstone32 keyboard +// 120 RGBoff +// 330 RGB 6 +// 300 RGB 32 + #define USB_MAX_POWER_CONSUMPTION 400 +#else + // fix iPhone and iPad power adapter issue + // iOS device need lessthan 100 + #define USB_MAX_POWER_CONSUMPTION 100 +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/treadstone32/info.json b/keyboards/treadstone32/info.json new file mode 100644 index 0000000000..2ac18be86e --- /dev/null +++ b/keyboards/treadstone32/info.json @@ -0,0 +1,175 @@ +{ + "keyboard_name": "Treadstone32", + "url": "https://github.com/marksard/Keyboards", + "maintainer": "marksard", + "width": 10.5, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "Q", + "x": 0, + "y": 0 + }, + { + "label": "W", + "x": 1, + "y": 0 + }, + { + "label": "E", + "x": 2, + "y": 0 + }, + { + "label": "R", + "x": 3, + "y": 0 + }, + { + "label": "T", + "x": 4, + "y": 0 + }, + { + "label": "Y", + "x": 5.5, + "y": 0 + }, + { + "label": "U", + "x": 6.5, + "y": 0 + }, + { + "label": "I", + "x": 7.5, + "y": 0 + }, + { + "label": "O", + "x": 8.5, + "y": 0 + }, + { + "label": "P", + "x": 9.5, + "y": 0 + }, + { + "label": "A", + "x": 0.25, + "y": 1 + }, + { + "label": "S", + "x": 1.25, + "y": 1 + }, + { + "label": "D", + "x": 2.25, + "y": 1 + }, + { + "label": "F", + "x": 3.25, + "y": 1 + }, + { + "label": "G", + "x": 4.25, + "y": 1 + }, + { + "label": "H", + "x": 5.25, + "y": 1 + }, + { + "label": "J", + "x": 6.25, + "y": 1 + }, + { + "label": "K", + "x": 7.25, + "y": 1 + }, + { + "label": "L", + "x": 8.25, + "y": 1 + }, + { + "label": "enter", + "x": 9.25, + "y": 1 + }, + { + "label": "Z", + "x": 0, + "y": 2 + }, + { + "label": "X", + "x": 1, + "y": 2 + }, + { + "label": "C", + "x": 2, + "y": 2 + }, + { + "label": "V", + "x": 3, + "y": 2 + }, + { + "label": "B", + "x": 4, + "y": 2 + }, + { + "label": "N", + "x": 5.5, + "y": 2 + }, + { + "label": "M", + "x": 6.5, + "y": 2 + }, + { + "label": ",", + "x": 7.5, + "y": 2 + }, + { + "label": ".", + "x": 8.5, + "y": 2 + }, + { + "label": "/", + "x": 9.5, + "y": 2 + }, + { + "label": "backspace", + "x": 3.25, + "y": 3, + "w": 2 + }, + { + "label": "space", + "x": 5.25, + "y": 3, + "w": 2 + } + ] + } + } +} diff --git a/keyboards/treadstone32/keymaps/default/config.h b/keyboards/treadstone32/keymaps/default/config.h new file mode 100644 index 0000000000..a6363f9b9a --- /dev/null +++ b/keyboards/treadstone32/keymaps/default/config.h @@ -0,0 +1,58 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +// place overrides here +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT + +#define TAPPING_LAYER_TERM 150 // Custom LT Tapping term +#define TAPPING_TERM_PER_KEY + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone32/keymaps/default/keymap.c b/keyboards/treadstone32/keymaps/default/keymap.c new file mode 100644 index 0000000000..a7b908c9de --- /dev/null +++ b/keyboards/treadstone32/keymaps/default/keymap.c @@ -0,0 +1,170 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + RGBRST = SAFE_RANGE, + LOWER, + RAISE, + KANJI, +}; + +// enum tapdances{ +// TD_CODO = 0, +// TD_SLRO, +// }; + +// Layer Mode aliases +#define KC_MLAD MO(_ADJUST) + +// Base layer mod tap +#define KC_A_SF LSFT_T(KC_A) +#define KC_Z_CT LCTL_T(KC_Z) +#define KC_X_AL LALT_T(KC_X) +#define KC_C_GU LGUI_T(KC_C) +#define KC_SSCT LCTL_T(KC_SLSH) +#define KC_ENSF LSFT_T(KC_ENT) + +// Lower layer mod tap +#define KC_F6SF LSFT_T(KC_F6) +#define KC_BSSF LSFT_T(KC_BSLS) +#define KC_11CT LCTL_T(KC_F11) +#define KC_12AL LALT_T(KC_F12) + +// Layer tap +#define KC_BSLO LT(_LOWER, KC_BSPC) +#define KC_SPRA LT(_RAISE, KC_SPC) + +// Tap dance +// #define KC_CODO TD(TD_CODO) +// #define KC_SLRO TD(TD_SLRO) + +// qk_tap_dance_action_t tap_dance_actions[] = { +// [TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT), +// [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +// }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_A_SF, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_Z_CT, KC_X_AL, KC_C_GU, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SSCT, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + KC_BSLO, KC_SPRA + // `---------|---------' + ), + + [_LOWER] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_F6SF, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, XXXXXXX, KC_SCLN, KC_QUOT, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_11CT, KC_12AL, KC_ESC, KC_TAB, KANJI, KC_DEL, XXXXXXX, XXXXXXX, XXXXXXX, KC_GRV, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + _______, KC_MLAD + // `---------|---------' + ), + + [_RAISE] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_LSFT, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_MINS, KC_RO, KC_COMM, KC_DOT, KC_SSCT, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + _______, _______ + // `---------|---------' + ), + + [_ADJUST] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + RESET, RGBRST, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, XXXXXXX, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + _______, _______ + // `---------|---------' + ) +}; + +uint16_t get_tapping_term(uint16_t keycode) { + switch (keycode) { + case KC_BSLO: + return TAPPING_LAYER_TERM; + case KC_SPRA: + return TAPPING_LAYER_TERM; + default: + return TAPPING_TERM; + } +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + bool result = false; + switch (keycode) { + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + return result; +} + +void keyboard_post_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif +} diff --git a/keyboards/treadstone32/keymaps/default/readme.md b/keyboards/treadstone32/keymaps/default/readme.md new file mode 100644 index 0000000000..387efc0d45 --- /dev/null +++ b/keyboards/treadstone32/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# Default keymap for treadstone32 + +## Description + +## How to use diff --git a/keyboards/treadstone32/keymaps/default/readme_jp.md b/keyboards/treadstone32/keymaps/default/readme_jp.md new file mode 100644 index 0000000000..ff078dcc8a --- /dev/null +++ b/keyboards/treadstone32/keymaps/default/readme_jp.md @@ -0,0 +1,55 @@ +# US配列ライクデフォルトキーマップ + +## 概要 + + US配列ライクなデフォルトキーマップです。 + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 + +Leyer Tap、Mod TapというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例:LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例:LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + + QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 + Lowerを最初し続けながらRaiseを同時押しするとAdjustレイヤーを使うことが出来ます。 + +## OS切り替え方法 + + Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える(はず)です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI(win)キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## IME切り替え方法 + + Winの場合、LowerレイヤーにKANJIキー(半角/全角 漢字)がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + + キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 + LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRESETを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + + Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone32/keymaps/default/rules.mk b/keyboards/treadstone32/keymaps/default/rules.mk new file mode 100644 index 0000000000..8c4541fa19 --- /dev/null +++ b/keyboards/treadstone32/keymaps/default/rules.mk @@ -0,0 +1,25 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +TAP_DANCE_ENABLE = no + +# If your custom treadstone32 pcb, you can rewrite to yes. +RGBLIGHT_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/treadstone32/keymaps/like_jis/config.h b/keyboards/treadstone32/keymaps/like_jis/config.h new file mode 100644 index 0000000000..a6363f9b9a --- /dev/null +++ b/keyboards/treadstone32/keymaps/like_jis/config.h @@ -0,0 +1,58 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +// place overrides here +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT + +#define TAPPING_LAYER_TERM 150 // Custom LT Tapping term +#define TAPPING_TERM_PER_KEY + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone32/keymaps/like_jis/keymap.c b/keyboards/treadstone32/keymaps/like_jis/keymap.c new file mode 100644 index 0000000000..891f484469 --- /dev/null +++ b/keyboards/treadstone32/keymaps/like_jis/keymap.c @@ -0,0 +1,170 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + RGBRST = SAFE_RANGE, + LOWER, + RAISE, + KANJI, +}; + +// enum tapdances{ +// TD_CODO = 0, +// TD_SLRO, +// }; + +// Layer Mode aliases +#define KC_MLAD MO(_ADJUST) + +// Base layer mod tap +#define KC_A_SF LSFT_T(KC_A) +#define KC_Z_CT LCTL_T(KC_Z) +#define KC_X_AL LALT_T(KC_X) +#define KC_C_GU LGUI_T(KC_C) +#define KC_SSCT LCTL_T(KC_SLSH) +#define KC_ENSF LSFT_T(KC_ENT) + +// Lower layer mod tap +#define KC_F6SF LSFT_T(KC_F6) +#define KC_BSSF LSFT_T(KC_BSLS) +#define KC_11CT LCTL_T(KC_F11) +#define KC_12AL LALT_T(KC_F12) + +// Layer tap +#define KC_BSLO LT(_LOWER, KC_BSPC) +#define KC_SPRA LT(_RAISE, KC_SPC) + +// Tap dance +// #define KC_CODO TD(TD_CODO) +// #define KC_SLRO TD(TD_SLRO) + +// qk_tap_dance_action_t tap_dance_actions[] = { +// [TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT), +// [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +// }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_A_SF, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_Z_CT, KC_X_AL, KC_C_GU, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SSCT, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + KC_BSLO, KC_SPRA + // `---------|---------' + ), + + [_LOWER] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_F6SF, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, KC_SCLN, KC_QUOT, KC_BSSF, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_11CT, KC_12AL, KC_ESC, KC_TAB, KANJI, KC_DEL, XXXXXXX, XXXXXXX, XXXXXXX, KC_RO, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + _______, KC_MLAD + // `---------|---------' + ), + + [_RAISE] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_LSFT, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_MINS, KC_RO, KC_COMM, KC_DOT, KC_SSCT, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + _______, _______ + // `---------|---------' + ), + + [_ADJUST] = LAYOUT( + //,---------------------------------------------------------------------------------------------------. + RESET, RGBRST, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, XXXXXXX, + //|---------+---------+---------+---------+---------+---------+---------+---------+---------+---------| + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, + //`---------+---------+---------+---------+---------+---------+---------+---------+---------+---------' + _______, _______ + // `---------|---------' + ) +}; + +uint16_t get_tapping_term(uint16_t keycode) { + switch (keycode) { + case KC_BSLO: + return TAPPING_LAYER_TERM; + case KC_SPRA: + return TAPPING_LAYER_TERM; + default: + return TAPPING_TERM; + } +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + bool result = false; + switch (keycode) { + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + return result; +} + +void keyboard_post_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif +} diff --git a/keyboards/treadstone32/keymaps/like_jis/readme.md b/keyboards/treadstone32/keymaps/like_jis/readme.md new file mode 100644 index 0000000000..206133ee7c --- /dev/null +++ b/keyboards/treadstone32/keymaps/like_jis/readme.md @@ -0,0 +1,5 @@ +# The like jis type keyboard keymap for treadstone32 + +## Description + +## How to use diff --git a/keyboards/treadstone32/keymaps/like_jis/readme_jp.md b/keyboards/treadstone32/keymaps/like_jis/readme_jp.md new file mode 100644 index 0000000000..3242f101e2 --- /dev/null +++ b/keyboards/treadstone32/keymaps/like_jis/readme_jp.md @@ -0,0 +1,55 @@ +# JISキーボードライクなキーマップ + +## 概要 + + デフォルトキーマップの記号類をJISライクな配置に揃えなおしたものです。 + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 + +Leyer Tap、Mod TapというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例:LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例:LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + + QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 + Lowerを最初し続けながらRaiseを同時押しするとAdjustレイヤーを使うことが出来ます。 + +## OS切り替え方法 + + Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える(はず)です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI(win)キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## IME切り替え方法 + + Winの場合、LowerレイヤーにKANJIキー(半角/全角 漢字)がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + + キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 + LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRESETを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + + Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone32/keymaps/like_jis/rules.mk b/keyboards/treadstone32/keymaps/like_jis/rules.mk new file mode 100644 index 0000000000..8c4541fa19 --- /dev/null +++ b/keyboards/treadstone32/keymaps/like_jis/rules.mk @@ -0,0 +1,25 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +TAP_DANCE_ENABLE = no + +# If your custom treadstone32 pcb, you can rewrite to yes. +RGBLIGHT_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/treadstone32/readme.md b/keyboards/treadstone32/readme.md new file mode 100644 index 0000000000..989a29c204 --- /dev/null +++ b/keyboards/treadstone32/readme.md @@ -0,0 +1,18 @@ +# treadstone32 + +![treadstone32](https://github.com/marksard/Keyboards/raw/master/_image/20190421-P4210001.jpg) + +A 32-key Symmetric staggered keyboard. + +Keyboard Maintainer: [marksard](https://github.com/marksard) +Hardware Supported: The PCBs, controllers supported +Hardware Availability: links to where you can find this hardware + +Make example for this keyboard (after setting up your build environment): + + make treadstone32:default:dfu + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +[Build guide](https://github.com/marksard/Keyboards/blob/master/treadstone32/documents/treadstone32_buildguide.md) +[Firmware](https://github.com/marksard/qmk_firmware/tree/my_customize/keyboards/treadstone32) diff --git a/keyboards/treadstone32/rules.mk b/keyboards/treadstone32/rules.mk new file mode 100644 index 0000000000..1d37dfc69f --- /dev/null +++ b/keyboards/treadstone32/rules.mk @@ -0,0 +1,64 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +LEADER_ENABLE = no + diff --git a/keyboards/treadstone32/treadstone32.c b/keyboards/treadstone32/treadstone32.c new file mode 100644 index 0000000000..9d27f86ffe --- /dev/null +++ b/keyboards/treadstone32/treadstone32.c @@ -0,0 +1,43 @@ +/* Copyright 2019 marksard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "treadstone32.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/treadstone32/treadstone32.h b/keyboards/treadstone32/treadstone32.h new file mode 100644 index 0000000000..90181124c0 --- /dev/null +++ b/keyboards/treadstone32/treadstone32.h @@ -0,0 +1,45 @@ +/* Copyright 2019 marksard. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define K_N KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + L09, L08, L07, L06, L05, L04, L03, L02, L01, L00, \ + L19, L18, L17, L16, L15, L14, L13, L12, L11, L10, \ + L29, L28, L27, L26, L25, L24, L23, L22, L21, L20, \ + L35, L34 \ + ) \ + { \ + { L00, L01, L02, L03, L04 }, \ + { L10, L11, L12, L13, L14 }, \ + { L20, L21, L22, L23, L24 }, \ + { K_N, K_N, K_N, K_N, L34 }, \ + { L05, L06, L07, L08, L09 }, \ + { L15, L16, L17, L18, L19 }, \ + { L25, L26, L27, L28, L29 }, \ + { L35, K_N, K_N, K_N, K_N } \ + } |