diff options
Diffstat (limited to 'keyboards')
65 files changed, 1504 insertions, 120 deletions
diff --git a/keyboards/gskt00/config.h b/keyboards/gskt00/config.h deleted file mode 100755 index 8ab0583cc8..0000000000 --- a/keyboards/gskt00/config.h +++ /dev/null @@ -1,31 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6061 -#define DEVICE_VER 0x0001 -#define MANUFACTURER inachie -#define PRODUCT GSKT00 - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F1, D1, D2, D4, D6, F7, B0, F4 } -#define MATRIX_COL_PINS { F6, D7, F5, C7, B4, C6, B6, B5 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/gskt00/gskt00.c b/keyboards/gskt00/gskt00.c deleted file mode 100755 index 89a0040ff3..0000000000 --- a/keyboards/gskt00/gskt00.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "gskt00.h" - diff --git a/keyboards/gskt00/readme.md b/keyboards/gskt00/readme.md deleted file mode 100644 index ad03ac819f..0000000000 --- a/keyboards/gskt00/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# GSKT-00 PCB - -Firmware for the GSKT-00 PCB - -Keyboard Maintainer: [/u/iNachie](https://github.com/nachie) -Hardware Supported: GSKT-00 PCB -Hardware Availability: [/u/iNachie](https://www.reddit.com/user/inachie/) - -Make example for this keyboard (after setting up your build environment): - - make gskt00:default - -Or to make and flash: - - make gskt00:default:dfu - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kapcave/arya/arya.c b/keyboards/kapcave/arya/arya.c new file mode 100644 index 0000000000..af5d19be4f --- /dev/null +++ b/keyboards/kapcave/arya/arya.c @@ -0,0 +1,27 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "arya.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + return true; +} diff --git a/keyboards/kapcave/arya/arya.h b/keyboards/kapcave/arya/arya.h new file mode 100644 index 0000000000..ea1d1916c3 --- /dev/null +++ b/keyboards/kapcave/arya/arya.h @@ -0,0 +1,43 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K81, K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ + K80, K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ + K82, K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ + K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ + K30, K40, K50, K60, K00, K10, K20 \ +) \ +{ \ + { K00 , K01 , K02 , K03 , K04 , K05 , K06 , K07 }, \ + { K10 , K11 , K12 , K13 , K14 , K15 , K16 , K17 }, \ + { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 }, \ + { K30 , K31 , K32 , K33 , K34 , K35 , K36 , K37 }, \ + { K40 , K41 , K42 , K43 , K44 , K45 , K46 , K47 }, \ + { K50 , K51 , K52 , K53 , K54 , K55 , K56 , K57 }, \ + { K60 , K61 , K62 , K63 , K64 , K65 , K66 , K67 }, \ + { KC_NO , K71 , K72 , K73 , K74 , K75 , K76 , K77 }, \ + { K80 , K81 , K82 , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} \ +} + + + + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/kapcave/arya/chconf.h b/keyboards/kapcave/arya/chconf.h new file mode 100644 index 0000000000..d5c78af075 --- /dev/null +++ b/keyboards/kapcave/arya/chconf.h @@ -0,0 +1,25 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 + +#define CH_CFG_INTERVALS_SIZE 16 + +#include_next <chconf.h> + diff --git a/keyboards/kapcave/arya/config.h b/keyboards/kapcave/arya/config.h new file mode 100644 index 0000000000..62df795ff5 --- /dev/null +++ b/keyboards/kapcave/arya/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x4152 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KapCave +#define PRODUCT Arya + +/* key matrix size */ +#define MATRIX_ROWS 9 +#define MATRIX_COLS 8 + +#define MATRIX_COL_PINS { B0, B5, B4, B2, C13, F1, F0, A14} +#define MATRIX_ROW_PINS { B8, A13, B1, A15, B9, B10, B11, A0, A8 } +#define DIODE_DIRECTION COL2ROW + + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define ENCODERS_PAD_A { B12, B14, C15 } +#define ENCODERS_PAD_B { B13, B15, C14 } + +#define ENCODER_RESOLUTION 2 +#define TAP_CODE_DELAY 25 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/kapcave/arya/halconf.h b/keyboards/kapcave/arya/halconf.h new file mode 100644 index 0000000000..dffa322d19 --- /dev/null +++ b/keyboards/kapcave/arya/halconf.h @@ -0,0 +1,23 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define HAL_USE_PWM TRUE + +#include_next <halconf.h> + diff --git a/keyboards/kapcave/arya/info.json b/keyboards/kapcave/arya/info.json new file mode 100644 index 0000000000..fb220aa070 --- /dev/null +++ b/keyboards/kapcave/arya/info.json @@ -0,0 +1,77 @@ +{ + "keyboard_name": "Arya", + "url": "https://kapcave.com/products/arya", + "maintainer": "nachie", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":2.75, "y":5.9}, + {"label":"\u00ac", "x":4, "y":6.0}, + {"label":"!", "x":5, "y":6.0}, + {"label":"\"", "x":6, "y":6.0}, + {"label":"_", "x":15.25, "y":6.0}, + {"label":"+", "x":16.25, "y":6.0}, + {"label":"", "x":17.25, "y":6.0}, + {"label":"", "x":18.25, "y":6.0}, + {"label":"Pg Up", "x":2.5, "y":6.9}, + {"label":"Tab", "x":3.75, "y":7.0, "w":1.5}, + {"label":"Q", "x":5.25, "y":7.0}, + {"label":"P", "x":15, "y":7.0}, + {"label":"{", "x":16, "y":7.0}, + {"label":"}", "x":17, "y":7.0}, + {"label":"|", "x":18, "y":7.0, "w":1.5}, + {"label":"Pg Dn", "x":2.25, "y":7.9}, + {"label":"Caps Lock", "x":3.5, "y":8.0, "w":1.75}, + {"label":"A", "x":5.25, "y":8.0}, + {"label":":", "x":15.5, "y":8.0}, + {"label":"\"", "x":16.5, "y":8.0}, + {"label":"Enter", "x":17.5, "y":8.0, "w":2.25}, + {"label":"Shift", "x":3.25, "y":9.0, "w":2.25}, + {"label":"Z", "x":5.5, "y":9.0}, + {"label":">", "x":15.25, "y":9.0}, + {"label":"?", "x":16.25, "y":9.0}, + {"label":"Shift", "x":17.25, "y":9.0, "w":1.75}, + {"label":"Fn", "x":19, "y":9.0}, + {"label":"Ctrl", "x":3.25, "y":10.0, "w":1.5}, + {"label":"Ctrl", "x":18.25, "y":10.0, "w":1.5}, + {"label":"\u00a3", "x":8.25, "y":4.5}, + {"label":"$", "x":9.25, "y":4.5}, + {"label":"%", "x":10.25, "y":4.5}, + {"label":"^", "x":11.25, "y":4.5}, + {"label":"W", "x":7.75, "y":5.5}, + {"label":"E", "x":8.75, "y":5.5}, + {"label":"R", "x":9.75, "y":5.5}, + {"label":"T", "x":10.75, "y":5.5}, + {"label":"S", "x":8, "y":6.5}, + {"label":"D", "x":9, "y":6.5}, + {"label":"F", "x":10, "y":6.5}, + {"label":"G", "x":11, "y":6.5}, + {"label":"X", "x":8.5, "y":7.5}, + {"label":"C", "x":9.5, "y":7.5}, + {"label":"V", "x":10.5, "y":7.5}, + {"label":"B", "x":11.5, "y":7.5}, + {"label":"Alt", "x":8.25, "y":8.5, "w":1.5}, + {"label":"", "x":9.75, "y":8.5, "w":2}, + {"label":"Fn", "x":11.75, "y":8.5, "w":1.25}, + {"label":"&", "x":9.5, "y":9.0}, + {"label":"*", "x":10.5, "y":9.0}, + {"label":"(", "x":11.5, "y":9.0}, + {"label":")", "x":12.5, "y":9.0}, + {"label":"Y", "x":9, "y":10.0}, + {"label":"U", "x":10, "y":10.0}, + {"label":"I", "x":11, "y":10.0}, + {"label":"O", "x":12, "y":10.0}, + {"label":"H", "x":9.25, "y":11.0}, + {"label":"J", "x":10.25, "y":11.0}, + {"label":"K", "x":11.25, "y":11.0}, + {"label":"L", "x":12.25, "y":11.0}, + {"label":"Fn", "x":8.75, "y":12.0}, + {"label":"N", "x":9.75, "y":12.0}, + {"label":"M", "x":10.75, "y":12.0}, + {"label":"<", "x":11.75, "y":12.0}, + {"label":"Shift", "x":8.75, "y":13.0, "w":2.75}, + {"label":"Alt", "x":11.5, "y":13.0, "w":1.5} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/default/keymap.c b/keyboards/kapcave/arya/keymaps/default/keymap.c new file mode 100644 index 0000000000..b8300b1f4a --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_alice_split_bs( + KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LGUI, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL + ), + LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), +};
\ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/default/readme.md b/keyboards/kapcave/arya/keymaps/default/readme.md new file mode 100644 index 0000000000..9d9894862a --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/default/readme.md @@ -0,0 +1 @@ +The default layout for the KapCave Arya
\ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/via/keymap.c b/keyboards/kapcave/arya/keymaps/via/keymap.c new file mode 100644 index 0000000000..4b98707da7 --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/via/keymap.c @@ -0,0 +1,56 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + [_BASE] = LAYOUT_alice_split_bs( + KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LGUI, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL + ), + + /* FUNCTION */ + [_FN] = LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + + [_FN2] = LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + + +}; + diff --git a/keyboards/kapcave/arya/keymaps/via/readme.md b/keyboards/kapcave/arya/keymaps/via/readme.md new file mode 100644 index 0000000000..dcf12fbffd --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/via/readme.md @@ -0,0 +1 @@ +The VIA Keymap for the KapCave Arya
\ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/via/rules.mk b/keyboards/kapcave/arya/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/kapcave/arya/mcuconf.h b/keyboards/kapcave/arya/mcuconf.h new file mode 100644 index 0000000000..5c161dbe3c --- /dev/null +++ b/keyboards/kapcave/arya/mcuconf.h @@ -0,0 +1,33 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once +#include_next <mcuconf.h> + +/* enable TIM1, used for backlight PWM */ +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE + +/* enable TIM2, used for underglow PWM driver */ +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +/* move system from TIM2 (default) to TIM3 (since TIM2 is needed for underglow) */ +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/kapcave/arya/readme.md b/keyboards/kapcave/arya/readme.md new file mode 100644 index 0000000000..12fe9684a5 --- /dev/null +++ b/keyboards/kapcave/arya/readme.md @@ -0,0 +1,23 @@ +# KapCave Arya + +Firmware for the KapCave Arya Keyboard + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: Arya PCB +* Hardware Availability: [KapCave](https://kapcave.com/products/arya-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/arya:default + +Or to make and flash: + + make kapcave/arya:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down Right Space key and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/kapcave/arya/rules.mk b/keyboards/kapcave/arya/rules.mk new file mode 100644 index 0000000000..4732327713 --- /dev/null +++ b/keyboards/kapcave/arya/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kapcave/gskt00/config.h b/keyboards/kapcave/gskt00/config.h new file mode 100755 index 0000000000..91c34182e7 --- /dev/null +++ b/keyboards/kapcave/gskt00/config.h @@ -0,0 +1,52 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x6061 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KapCave +#define PRODUCT GSKT00 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F1, D1, D2, D4, D6, F7, B0, F4 } +#define MATRIX_COL_PINS { F6, D7, F5, C7, B4, C6, B6, B5 } +#define UNUSED_PINS + +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + diff --git a/keyboards/kapcave/gskt00/gskt00.c b/keyboards/kapcave/gskt00/gskt00.c new file mode 100755 index 0000000000..c2c2d823f9 --- /dev/null +++ b/keyboards/kapcave/gskt00/gskt00.c @@ -0,0 +1,18 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "gskt00.h" + diff --git a/keyboards/gskt00/gskt00.h b/keyboards/kapcave/gskt00/gskt00.h index 151155d7f7..d0ac51acd7 100755 --- a/keyboards/gskt00/gskt00.h +++ b/keyboards/kapcave/gskt00/gskt00.h @@ -1,3 +1,20 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #pragma once #include "quantum.h" diff --git a/keyboards/gskt00/info.json b/keyboards/kapcave/gskt00/info.json index 0b81c58514..ba1455fae9 100644 --- a/keyboards/gskt00/info.json +++ b/keyboards/kapcave/gskt00/info.json @@ -1,6 +1,6 @@ { - "keyboard_name": "gskt00", - "url": "", + "keyboard_name": "GSKT-00", + "url": "https://kapcave.com/products/gskt-00-pcb-usb-c", "maintainer": "nachie", "layouts": { "LAYOUT_60_ansi_tsangan": { diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/config.h b/keyboards/kapcave/gskt00/keymaps/default-poly/config.h new file mode 100644 index 0000000000..2db5749cb5 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/config.h @@ -0,0 +1,39 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#define ENCODERS_PAD_A { D5 } +#define ENCODERS_PAD_B { D3 } + +#define RGB_DI_PIN D0 +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 14 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif + diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c b/keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c new file mode 100755 index 0000000000..8c7e9720db --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c @@ -0,0 +1,70 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LCTL), + + /* DVORAK */ + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSLS, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, + MO(3), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, + KC_LSFT, KC_NUBS, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), + + /* COLEMAK */ + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, + MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), + + /* FUNCTION */ + LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSPC, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG) + +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_UP); + } else { + tap_code(KC_DOWN); + } + } + return true; +}
\ No newline at end of file diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/readme.md b/keyboards/kapcave/gskt00/keymaps/default-poly/readme.md new file mode 100644 index 0000000000..1f6d7bcd38 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/readme.md @@ -0,0 +1 @@ +There was a private run of Polycarbonate cases. This keymap supports the underglow PCBs that shipped out with those, in addition to future underglow pcbs. These PCBs also had encoder support which is reflected in the keymap.
\ No newline at end of file diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk b/keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk new file mode 100644 index 0000000000..53c9db2bd2 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +ENCODER_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/gskt00/keymaps/default/keymap.c b/keyboards/kapcave/gskt00/keymaps/default/keymap.c index 225d0224ea..0d8d6dad6b 100755 --- a/keyboards/gskt00/keymaps/default/keymap.c +++ b/keyboards/kapcave/gskt00/keymaps/default/keymap.c @@ -1,3 +1,19 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -10,22 +26,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), KC_LGUI, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(3)), - /* DVORAK */ - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSLS, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, - MO(3), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, - KC_LSFT, KC_NUBS, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LSFT, MO(3), - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), - - /* COLEMAK */ - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, - MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), - /* FUNCTION */ LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, @@ -35,3 +35,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG) }; + diff --git a/keyboards/kapcave/gskt00/keymaps/default/readme.md b/keyboards/kapcave/gskt00/keymaps/default/readme.md new file mode 100644 index 0000000000..042b07d148 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default/readme.md @@ -0,0 +1 @@ +The default keymap for the GSKT-00 PCB.
\ No newline at end of file diff --git a/keyboards/gskt00/keymaps/nachie/keymap.c b/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c index 8606d24841..8606d24841 100755 --- a/keyboards/gskt00/keymaps/nachie/keymap.c +++ b/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c diff --git a/keyboards/kapcave/gskt00/keymaps/via/keymap.c b/keyboards/kapcave/gskt00/keymaps/via/keymap.c new file mode 100755 index 0000000000..95bc131422 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LGUI, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(3)), + + /* FUNCTION */ + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_PAUS, KC_DEL, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______), + + [_FN3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/kapcave/gskt00/keymaps/via/readme.md b/keyboards/kapcave/gskt00/keymaps/via/readme.md new file mode 100644 index 0000000000..c5c3db7e3b --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/via/readme.md @@ -0,0 +1 @@ +The via keymap for the GSKT-00 PCB.
\ No newline at end of file diff --git a/keyboards/kapcave/gskt00/keymaps/via/rules.mk b/keyboards/kapcave/gskt00/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/kapcave/gskt00/readme.md b/keyboards/kapcave/gskt00/readme.md new file mode 100644 index 0000000000..d1a90ca583 --- /dev/null +++ b/keyboards/kapcave/gskt00/readme.md @@ -0,0 +1,23 @@ +# GSKT-00 PCB + +Firmware for the GSKT-00 PCB + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: GSKT-00 PCB +* Hardware Availability: [KapCave](https://kapcave.com/products/gskt-00-pcb-usb-c) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/gskt00:default + +Or to make and flash: + + make kapcave/gskt00:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down ESC key (top left) and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/gskt00/rules.mk b/keyboards/kapcave/gskt00/rules.mk index 4e262e042f..0c803ec2e2 100755 --- a/keyboards/gskt00/rules.mk +++ b/keyboards/kapcave/gskt00/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/paladin64/config.h b/keyboards/kapcave/paladin64/config.h index 10e4901a66..2685be96cf 100755 --- a/keyboards/paladin64/config.h +++ b/keyboards/kapcave/paladin64/config.h @@ -1,18 +1,38 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x5036 #define DEVICE_VER 0x0001 -#define MANUFACTURER inachie +#define MANUFACTURER KapCave #define PRODUCT paladin64 /* key matrix size */ #define MATRIX_ROWS 8 #define MATRIX_COLS 8 +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 6 + +/* Only required if you add in a trackpoint hardware to the pcb */ #ifdef PS2_USE_USART #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND diff --git a/keyboards/paladin64/info.json b/keyboards/kapcave/paladin64/info.json index 628b1c8c8d..207010c24e 100644 --- a/keyboards/paladin64/info.json +++ b/keyboards/kapcave/paladin64/info.json @@ -1,7 +1,7 @@ { - "keyboard_name": "paladin64", - "url": "", - "maintainer": "qmk", + "keyboard_name": "Paladin64", + "url": "https://kapcave.com/products/paladin64-pcb", + "maintainer": "nachie", "layouts": { "LAYOUT_all": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/paladin64/keymaps/default/keymap.c b/keyboards/kapcave/paladin64/keymaps/default/keymap.c index 15c5858a81..ed906909fe 100755 --- a/keyboards/paladin64/keymaps/default/keymap.c +++ b/keyboards/kapcave/paladin64/keymaps/default/keymap.c @@ -1,3 +1,19 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { diff --git a/keyboards/kapcave/paladin64/keymaps/default/readme.md b/keyboards/kapcave/paladin64/keymaps/default/readme.md new file mode 100644 index 0000000000..11248150d9 --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/default/readme.md @@ -0,0 +1 @@ +The default keymap for Paladin64
\ No newline at end of file diff --git a/keyboards/kapcave/paladin64/keymaps/via/keymap.c b/keyboards/kapcave/paladin64/keymaps/via/keymap.c new file mode 100644 index 0000000000..7ce94a5ef4 --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_APP, KC_RGUI, KC_RALT, KC_LCTL), + + /* FUNCTION */ + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSPC, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG), + + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + + [_FN3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______) + +}; + diff --git a/keyboards/kapcave/paladin64/keymaps/via/readme.md b/keyboards/kapcave/paladin64/keymaps/via/readme.md new file mode 100644 index 0000000000..2cf66cd4cb --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/via/readme.md @@ -0,0 +1 @@ +Via layout for the paladin64 pcb
\ No newline at end of file diff --git a/keyboards/kapcave/paladin64/keymaps/via/rules.mk b/keyboards/kapcave/paladin64/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/kapcave/paladin64/paladin64.c b/keyboards/kapcave/paladin64/paladin64.c new file mode 100755 index 0000000000..88dd1fdff2 --- /dev/null +++ b/keyboards/kapcave/paladin64/paladin64.c @@ -0,0 +1,18 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "paladin64.h" + diff --git a/keyboards/paladin64/paladin64.h b/keyboards/kapcave/paladin64/paladin64.h index 1a55cf328f..b578c18540 100755 --- a/keyboards/paladin64/paladin64.h +++ b/keyboards/kapcave/paladin64/paladin64.h @@ -1,3 +1,19 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ #pragma once #include "quantum.h" diff --git a/keyboards/kapcave/paladin64/readme.md b/keyboards/kapcave/paladin64/readme.md new file mode 100644 index 0000000000..cc4a9b67e3 --- /dev/null +++ b/keyboards/kapcave/paladin64/readme.md @@ -0,0 +1,24 @@ +# Paladin64 ALPS PCB + +Firmware for the Paladin64 ALPS64 PCB, with underglow and an optional +trackpoint module. + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: Paladin64 ALPS PCB +* Hardware Availability: [KapCave](https://kapcave.com/products/paladin64-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/paladin64:default + +Or to make and flash: + + make kapcave/paladin64:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down ESC key (top left) and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/kapcave/paladin64/rules.mk b/keyboards/kapcave/paladin64/rules.mk new file mode 100755 index 0000000000..f526755d4b --- /dev/null +++ b/keyboards/kapcave/paladin64/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 60_ansi diff --git a/keyboards/kapcave/paladinpad/config.h b/keyboards/kapcave/paladinpad/config.h new file mode 100644 index 0000000000..9b3c9a4ca0 --- /dev/null +++ b/keyboards/kapcave/paladinpad/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x5050 +#define MANUFACTURER KapCave +#define PRODUCT paladinpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + + diff --git a/keyboards/kapcave/paladinpad/info.json b/keyboards/kapcave/paladinpad/info.json new file mode 100644 index 0000000000..7d1afccf60 --- /dev/null +++ b/keyboards/kapcave/paladinpad/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "PaladinPad", + "url": "https://kapcave.com/products/paladinpad-pcb", + "maintainer": "nachie", + "layouts": { + "LAYOUT_ortho_5x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":4} + ] + }, + "LAYOUT_numpad_aek": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + + {"x":0, "y":4, "w":2}, + {"x":2, "y":4}, + {"x":3, "y":3, "h":2} + ] + }, + "LAYOUT_numpad_5x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":1, "h":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + + {"x":0, "y":4, "w":2}, + {"x":2, "y":4}, + {"x":3, "y":3, "h":2} + ] + } + } +} diff --git a/keyboards/kapcave/paladinpad/keymaps/aek/keymap.c b/keyboards/kapcave/paladinpad/keymaps/aek/keymap.c new file mode 100644 index 0000000000..79c3baae44 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/aek/keymap.c @@ -0,0 +1,38 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + LAYOUT_numpad_aek( + MO(1), KC_PEQL, KC_PSLS, KC_PAST, + KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + LAYOUT_numpad_aek( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RESET, KC_NLCK) +}; + diff --git a/keyboards/kapcave/paladinpad/keymaps/aek/readme.md b/keyboards/kapcave/paladinpad/keymaps/aek/readme.md new file mode 100644 index 0000000000..44b106fa6b --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/aek/readme.md @@ -0,0 +1 @@ +The keymap for PaladinPad which resembles the AEK Numpad
\ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/keymaps/default/keymap.c b/keyboards/kapcave/paladinpad/keymaps/default/keymap.c new file mode 100644 index 0000000000..30dd1b9c00 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + LAYOUT_numpad_5x4( + MO(1), KC_PAST, KC_PSLS, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + LAYOUT_numpad_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RESET, KC_NLCK) +}; + diff --git a/keyboards/kapcave/paladinpad/keymaps/default/readme.md b/keyboards/kapcave/paladinpad/keymaps/default/readme.md new file mode 100644 index 0000000000..2ade4edf38 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/default/readme.md @@ -0,0 +1 @@ +The default keymap for PaladinPad which resembles the AEK Numpad
\ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c b/keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c new file mode 100644 index 0000000000..a65b53b341 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c @@ -0,0 +1,53 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +enum custom_keycodes { + DBLZERO = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_BSPC, + KC_P7, KC_P8, KC_P9, KC_MINS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_EQL, + DBLZERO, KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + LAYOUT_ortho_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET, KC_NLCK) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case DBLZERO: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + } + return true; +} + + diff --git a/keyboards/kapcave/paladinpad/keymaps/ortho/readme.md b/keyboards/kapcave/paladinpad/keymaps/ortho/readme.md new file mode 100644 index 0000000000..4dc98d30f4 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/ortho/readme.md @@ -0,0 +1 @@ +The ortho keymap for PaladinPad which makes it a 5x4 ortho pad
\ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/keymaps/via/keymap.c b/keyboards/kapcave/paladinpad/keymaps/via/keymap.c new file mode 100644 index 0000000000..2315da4ace --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + [_BASE] = LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_BSPC, + KC_P7, KC_P8, KC_P9, KC_MINS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_EQL, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + [_FN] = LAYOUT_ortho_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET, KC_NLCK), + + /* FUNCTION */ + [_FN2] = LAYOUT_ortho_5x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), + + /* FUNCTION */ + [_FN3] = LAYOUT_ortho_5x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______) +}; diff --git a/keyboards/kapcave/paladinpad/keymaps/via/rules.mk b/keyboards/kapcave/paladinpad/keymaps/via/rules.mk new file mode 100644 index 0000000000..600f7d16a7 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +# Not enough space on ATMega32u4 for RGB + Audio + Via +AUDIO_ENABLE = no
\ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/paladinpad.c b/keyboards/kapcave/paladinpad/paladinpad.c new file mode 100644 index 0000000000..063e49c872 --- /dev/null +++ b/keyboards/kapcave/paladinpad/paladinpad.c @@ -0,0 +1,17 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "paladinpad.h" diff --git a/keyboards/kapcave/paladinpad/paladinpad.h b/keyboards/kapcave/paladinpad/paladinpad.h new file mode 100644 index 0000000000..54b320c424 --- /dev/null +++ b/keyboards/kapcave/paladinpad/paladinpad.h @@ -0,0 +1,103 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "quantum.h" + +/* + * ┌─────┬─────┬─────┬─────┐ + * │Num1 │ Eq │Slsh │Star │ + * ├─────┼─────┼─────┼─────┤ + * │ 7 │ 8 │ 9 │ │ + * ├─────┼─────┼─────┤Plus │ + * │ 4 │ 5 │ 6 │ │ + * ├─────┼─────┼─────┼─────┤ + * │ 1 │ 2 │ 3 │ │ + * ├─────┴─────┼─────┤ Ent │ + * │ 0 │ . │ │ + * └───────────┴─────┴─────┘ + */ + +#define LAYOUT_numpad_5x4( \ + K_NUM1, K_SLSH, K_STAR, K_MINUS, \ + K_7, K_8, K_9, \ + K_4, K_5, K_6, K_PLUS, \ + K_1, K_2, K_3, \ + K_0, K_DOT, K_ENT \ +) { \ + { K_NUM1, K_SLSH, K_STAR, K_MINUS }, \ + { K_7, K_8, K_9, KC_NO }, \ + { K_4, K_5, K_6, K_PLUS }, \ + { K_1, K_2, K_3, K_ENT }, \ + { K_0, K_DOT, KC_NO, KC_NO } \ +} + +/* + * ┌─────┬─────┬─────┬─────┐ + * │Num1 │Eql │Slsh │Star │ + * ├─────┼─────┼─────┼─────┤ + * │ 7 │ 8 │ 9 │Minus│ + * ├─────┼─────┼─────┼─────┤ + * │ 4 │ 5 │ 6 │Plus │ + * ├─────┼─────┼─────┼─────┤ + * │ 1 │ 2 │ 3 │ │ + * ├─────┼─────┼─────┤ Ent │ + * │ 0 │ 10 │ . │ │ + * └─────┴─────┴─────┴─────┘ + */ + +#define LAYOUT_numpad_aek( \ + K_NUM1, K_EQ1, K_SLSH1, K_STAR1, \ + K_7, K_8, K_9, K_MINUS1, \ + K_4, K_5, K_6, K_PLUS, \ + K_1, K_2, K_3, \ + K_0, K_DOT1, K_ENT \ +) { \ + { K_NUM1, K_EQ1, K_SLSH1, K_STAR1 }, \ + { K_7, K_8, K_9, K_MINUS1 }, \ + { K_4, K_5, K_6, K_PLUS }, \ + { K_1, K_2, K_3, K_ENT }, \ + { K_0, K_DOT1, KC_NO, KC_NO } \ +} + +/* + * ┌─────┬─────┬─────┬─────┐ + * │Num1 │ Eq │Slsh │Star │ + * ├─────┼─────┼─────┼─────┤ + * │ 7 │ 8 │ 9 │Minus│ + * ├─────┼─────┼─────┼─────┤ + * │ 4 │ 5 │ 6 │Plus │ + * ├─────┼─────┼─────┼─────┤ + * │ 1 │ 2 │ 3 │ 11 │ + * ├─────┼─────┼─────┼─────┤ + * │ 0 │ 10 │ . │ Ent │ + * └─────┴─────┴─────┴─────┘ + */ + +#define LAYOUT_ortho_5x4( \ + K_NUM1, K_EQ1, K_SLSH1, K_STAR1, \ + K_7, K_8, K_9, K_MINUS1, \ + K_4, K_5, K_6, K_PLUS, \ + K_1, K_2, K_3, K_11, \ + K_0, K_10, K_DOT1, K_ENT \ +) { \ + { K_NUM1, K_EQ1, K_SLSH1, K_STAR1 }, \ + { K_7, K_8, K_9, K_MINUS1 }, \ + { K_4, K_5, K_6, K_PLUS }, \ + { K_1, K_2, K_3, K_ENT }, \ + { K_0, K_DOT1, K_10, K_11 } \ +} diff --git a/keyboards/kapcave/paladinpad/readme.md b/keyboards/kapcave/paladinpad/readme.md new file mode 100644 index 0000000000..f21c43d783 --- /dev/null +++ b/keyboards/kapcave/paladinpad/readme.md @@ -0,0 +1,23 @@ +# PaladinPad PCB + +Firmware for the PaladinPad, with underglow. + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: PaladinPad +* Hardware Availability: [KapCave](https://kapcave.com/products/paladinpad-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/paladinpad:default + +Or to make and flash: + + make kapcave/paladinpad:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down NumLock (Top Left) and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/kapcave/paladinpad/rev1/config.h b/keyboards/kapcave/paladinpad/rev1/config.h new file mode 100644 index 0000000000..84af56ec25 --- /dev/null +++ b/keyboards/kapcave/paladinpad/rev1/config.h @@ -0,0 +1,44 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +#define DEVICE_VER 0x0001 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { C7, B6, B4, D7, D6 } +#define MATRIX_COL_PINS { D4, D5, D3, B7 } + +#define RGB_DI_PIN D0 + +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif diff --git a/keyboards/kapcave/paladinpad/rev1/rules.mk b/keyboards/kapcave/paladinpad/rev1/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/kapcave/paladinpad/rev1/rules.mk diff --git a/keyboards/kapcave/paladinpad/rev2/config.h b/keyboards/kapcave/paladinpad/rev2/config.h new file mode 100644 index 0000000000..a27ac03ab1 --- /dev/null +++ b/keyboards/kapcave/paladinpad/rev2/config.h @@ -0,0 +1,47 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +#define DEVICE_VER 0x0002 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F4, F6, D7, B4, D6 } +#define MATRIX_COL_PINS { F7, F5, D3, B7 } + +#define AUDIO_PIN C6 + +#define RGB_DI_PIN D0 + +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 7 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif + diff --git a/keyboards/kapcave/paladinpad/rev2/rules.mk b/keyboards/kapcave/paladinpad/rev2/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/kapcave/paladinpad/rev2/rules.mk diff --git a/keyboards/kapcave/paladinpad/rules.mk b/keyboards/kapcave/paladinpad/rules.mk new file mode 100644 index 0000000000..bb918b188d --- /dev/null +++ b/keyboards/kapcave/paladinpad/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +DEFAULT_FOLDER = kapcave/paladinpad/rev2 +LAYOUTS = numpad_5x4 ortho_5x4 diff --git a/keyboards/paladin64/paladin64.c b/keyboards/paladin64/paladin64.c deleted file mode 100755 index 5ef78d5bf7..0000000000 --- a/keyboards/paladin64/paladin64.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "paladin64.h" - diff --git a/keyboards/paladin64/readme.md b/keyboards/paladin64/readme.md deleted file mode 100644 index 8d62bb6b71..0000000000 --- a/keyboards/paladin64/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# Paladin64 ALPS PCB by /u/iNachie - -Firmware for the Paladin64 ALPS64 PCB, with underglow and an optional -trackpoint module. - -Keyboard Maintainer: [/u/iNachie](https://github.com/nachie) -Hardware Supported: Paladin64 ALPS PCB by iNachie -Hardware Availability: [/u/iNachie](https://www.reddit.com/user/inachie/) - -Make example for this keyboard (after setting up your build environment): - - make paladin64:default - -Or to make and flash: - - make paladin64:default:dfu - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/paladin64/rules.mk b/keyboards/paladin64/rules.mk deleted file mode 100755 index b25ab43119..0000000000 --- a/keyboards/paladin64/rules.mk +++ /dev/null @@ -1,24 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes -#PS2_MOUSE_ENABLE = yes -#PS2_USE_USART = yes -#PS2_USE_INT = yes - -LAYOUTS = 60_ansi |