diff options
Diffstat (limited to 'keyboards')
8 files changed, 137 insertions, 1 deletions
diff --git a/keyboards/2_milk/keymaps/mikethetiger/keymap.c b/keyboards/2_milk/keymaps/mikethetiger/keymap.c new file mode 100644 index 0000000000..66e0bc669b --- /dev/null +++ b/keyboards/2_milk/keymaps/mikethetiger/keymap.c @@ -0,0 +1,8 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_VOLU, + KC_VOLD + ) +}; diff --git a/keyboards/2_milk/keymaps/mikethetiger/readme.md b/keyboards/2_milk/keymaps/mikethetiger/readme.md new file mode 100644 index 0000000000..677732b057 --- /dev/null +++ b/keyboards/2_milk/keymaps/mikethetiger/readme.md @@ -0,0 +1 @@ +# mikethetiger's keymap for 2% Milk diff --git a/keyboards/2_milk/keymaps/mikethetiger/rules.mk b/keyboards/2_milk/keymaps/mikethetiger/rules.mk new file mode 100644 index 0000000000..b5f038ef23 --- /dev/null +++ b/keyboards/2_milk/keymaps/mikethetiger/rules.mk @@ -0,0 +1,13 @@ +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled +AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below +RGBLIGHT_ENABLE = yes # This can be enabled if a ws2812 strip is connected to the expansion port. diff --git a/keyboards/2_milk/rules.mk b/keyboards/2_milk/rules.mk index 73f55f9538..069527c0cc 100644 --- a/keyboards/2_milk/rules.mk +++ b/keyboards/2_milk/rules.mk @@ -1,4 +1,4 @@ -# MCU name +# MCU name MCU = atmega32u4 # Processor frequency. diff --git a/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/config.h b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/config.h new file mode 100644 index 0000000000..271f48d001 --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/config.h @@ -0,0 +1,3 @@ +#pragma once + +// place overrides here diff --git a/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/keymap.c new file mode 100644 index 0000000000..fec08cea3e --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/keymap.c @@ -0,0 +1,92 @@ +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _L1 3 +#define _L2 4 +#define _L3 5 + +// Curly braces have their own keys. These are defined to make them not mess up +// the grid in layer 2. +#define L_CURBR LSFT(KC_LBRC) +#define R_CURBR LSFT(KC_RBRC) + +enum custom_keycodes { + DVORAK = SAFE_RANGE, + QWERTY, + COLEMAK +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = LAYOUT( /* Qwerty */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1), + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2), + KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, KC_SPC, KC_RALT, KC_ESC, TG(_L3) + ), + [_DV] = LAYOUT( /* Dvorak */ + KC_TAB, KC_SLSH, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, MO(_L1), + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, MO(_L2), + KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, KC_SPC, KC_RALT, KC_ESC, TG(_L3) + ), + [_CM] = LAYOUT( /* Colemak */ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, MO(_L1), + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2), + KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, KC_SPC, KC_RALT, KC_ESC, TG(_L3) + ), + [_L1] = LAYOUT( /* LAYER 1 */ + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + _______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______, + _______, KC_ESC, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT, + _______, KC_LGUI, _______, _______, _______, _______, _______, _______ + ), + [_L2] = LAYOUT( /* LAYER 2 */ + _______, QWERTY, DVORAK, COLEMAK, _______, _______, _______, KC_7, KC_8, KC_9, KC_0, _______, + KC_ESC, KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, L_CURBR, R_CURBR, KC_4, KC_5, KC_6, KC_VOLU, KC_ENT, + _______, _______, _______, _______, _______, _______, KC_0, KC_1, KC_2, KC_3, KC_VOLD, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_L3] = LAYOUT( /* LAYER 3 */ + _______, _______, _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, _______, + KC_ESC, _______, _______, _______, _______, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8, _______, + KC_LSFT, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, KC_LSFT, KC_B, KC_SPC, KC_C, _______, _______, _______ + ) +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case DVORAK: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_DV); + } + return false; + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QW); + } + return false; + case COLEMAK: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_CM); + } + return false; + default: + return true; + } + return true; +}; diff --git a/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/readme.md b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/readme.md new file mode 100644 index 0000000000..3584c8b23f --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/readme.md @@ -0,0 +1 @@ +# mikethetiger's keymap for tv44
\ No newline at end of file diff --git a/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/rules.mk b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/rules.mk new file mode 100644 index 0000000000..7a331cd530 --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/mikethetiger/rules.mk @@ -0,0 +1,18 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + |