diff options
Diffstat (limited to 'keyboards')
20 files changed, 447 insertions, 170 deletions
diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index c9f6937eea..434b6c5916 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -1,39 +1,2 @@ #pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1219 -#define DEVICE_VER 0x0001 -#define MANUFACTURER DZTECH - -#define PRODUCT DZ60RGB -#define DESCRIPTION DZ60 ARM RGB keyboard -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } - -/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ - -#define DIODE_DIRECTION COL2ROW - -#define DEBOUNCE 3 -#ifdef RGB_MATRIX_ENABLE -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended -#define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_LED_PROCESS_LIMIT 4 -#define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 63 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL -#endif
\ No newline at end of file +#include "config_common.h"
\ No newline at end of file diff --git a/keyboards/dztech/dz60rgb/v1/config.h b/keyboards/dztech/dz60rgb/v1/config.h new file mode 100644 index 0000000000..d0358a2434 --- /dev/null +++ b/keyboards/dztech/dz60rgb/v1/config.h @@ -0,0 +1,36 @@ +#pragma once +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1219 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB +#define DESCRIPTION DZ60 ARM RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } +#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } + +/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 63 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif
\ No newline at end of file diff --git a/keyboards/dztech/dz60rgb/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk index f381ca585c..4f2073e6fa 100644 --- a/keyboards/dztech/dz60rgb/rules.mk +++ b/keyboards/dztech/dz60rgb/v1/rules.mk @@ -2,13 +2,13 @@ MCU = STM32F303 BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover AUDIO_ENABLE = no RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb/v2/config.h b/keyboards/dztech/dz60rgb/v2/config.h new file mode 100644 index 0000000000..ed1056ca90 --- /dev/null +++ b/keyboards/dztech/dz60rgb/v2/config.h @@ -0,0 +1,44 @@ +#pragma once +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1219 +#define DEVICE_VER 0x0002 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB +#define DESCRIPTION DZ60 AVR RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS {F5, F4, F1, B3, B2 } +#define MATRIX_COL_PINS {C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 63 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif diff --git a/keyboards/dztech/dz60rgb/v2/rules.mk b/keyboards/dztech/dz60rgb/v2/rules.mk new file mode 100644 index 0000000000..9dda31a1bd --- /dev/null +++ b/keyboards/dztech/dz60rgb/v2/rules.mk @@ -0,0 +1,23 @@ +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_ansi/config.h b/keyboards/dztech/dz60rgb_ansi/config.h index 2bd40a44d0..e38246b228 100644 --- a/keyboards/dztech/dz60rgb_ansi/config.h +++ b/keyboards/dztech/dz60rgb_ansi/config.h @@ -1,39 +1,2 @@ #pragma once - #include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1219 -#define DEVICE_VER 0x0001 -#define MANUFACTURER DZTECH - -#define PRODUCT DZ60RGB -#define DESCRIPTION DZ60 ARM RGB keyboard -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } - -/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ - -#define DIODE_DIRECTION COL2ROW - -#define DEBOUNCE 3 -#ifdef RGB_MATRIX_ENABLE -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended -#define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_LED_PROCESS_LIMIT 4 -#define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 61 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL -#endif
\ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_ansi/v1/config.h b/keyboards/dztech/dz60rgb_ansi/v1/config.h new file mode 100644 index 0000000000..bd9d6e848c --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/v1/config.h @@ -0,0 +1,36 @@ +#pragma once +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1220 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB_ANSI +#define DESCRIPTION DZ60 ARM RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } +#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } + +/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 61 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif
\ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_ansi/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk index 0636150529..4f2073e6fa 100644 --- a/keyboards/dztech/dz60rgb_ansi/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk @@ -2,15 +2,13 @@ MCU = STM32F303 BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover AUDIO_ENABLE = no RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in - -LAYOUTS = 60_ansi diff --git a/keyboards/dztech/dz60rgb_ansi/v2/config.h b/keyboards/dztech/dz60rgb_ansi/v2/config.h new file mode 100644 index 0000000000..b963fa2beb --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/v2/config.h @@ -0,0 +1,44 @@ +#pragma once +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1220 +#define DEVICE_VER 0x0002 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB_ANSI +#define DESCRIPTION DZ60 AVR RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS {F5, F4, F1, B3, B2 } +#define MATRIX_COL_PINS {C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 61 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif diff --git a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk new file mode 100644 index 0000000000..9dda31a1bd --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk @@ -0,0 +1,23 @@ +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_wkl/config.h b/keyboards/dztech/dz60rgb_wkl/config.h index 44ff5f1570..434b6c5916 100644 --- a/keyboards/dztech/dz60rgb_wkl/config.h +++ b/keyboards/dztech/dz60rgb_wkl/config.h @@ -1,39 +1,2 @@ #pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1219 -#define DEVICE_VER 0x0001 -#define MANUFACTURER DZTECH - -#define PRODUCT DZ60RGB -#define DESCRIPTION DZ60 ARM RGB keyboard -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } - -/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ - -#define DIODE_DIRECTION COL2ROW - -#define DEBOUNCE 3 -#ifdef RGB_MATRIX_ENABLE -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended -#define RGB_MATRIX_KEYPRESSES -#define RGB_MATRIX_LED_PROCESS_LIMIT 4 -#define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 62 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL -#endif
\ No newline at end of file +#include "config_common.h"
\ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_wkl/v1/config.h b/keyboards/dztech/dz60rgb_wkl/v1/config.h new file mode 100644 index 0000000000..97dd46c5f9 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/v1/config.h @@ -0,0 +1,36 @@ +#pragma once +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1221 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB_WKL +#define DESCRIPTION DZ60 ARM RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } +#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 } + +/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 62 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif
\ No newline at end of file diff --git a/keyboards/dztech/dz60rgb_wkl/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk index ed30bec8b6..4f2073e6fa 100644 --- a/keyboards/dztech/dz60rgb_wkl/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk @@ -1,14 +1,14 @@ -MCU = STM32F303 -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -DFU_SUFFIX_ARGS = -p DF11 -v 0483 +# MCU name +MCU = STM32F303 + BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover AUDIO_ENABLE = no RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix -NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
\ No newline at end of file +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_wkl/v2/config.h b/keyboards/dztech/dz60rgb_wkl/v2/config.h new file mode 100644 index 0000000000..e2b29d2f84 --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/v2/config.h @@ -0,0 +1,44 @@ +#pragma once +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1221 +#define DEVICE_VER 0x0002 +#define MANUFACTURER DZTECH + +#define PRODUCT DZ60RGB_WKL +#define DESCRIPTION DZ60 AVR RGB keyboard +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +#define MATRIX_ROW_PINS {F5, F4, F1, B3, B2 } +#define MATRIX_COL_PINS {C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#ifdef RGB_MATRIX_ENABLE +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 62 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif diff --git a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk new file mode 100644 index 0000000000..9dda31a1bd --- /dev/null +++ b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk @@ -0,0 +1,23 @@ +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz65rgb/config.h b/keyboards/dztech/dz65rgb/config.h index 611e57d586..434b6c5916 100644 --- a/keyboards/dztech/dz65rgb/config.h +++ b/keyboards/dztech/dz65rgb/config.h @@ -1,46 +1,2 @@ #pragma once -#include "config_common.h" -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1224 -#define DEVICE_VER 0x0001 -#define MANUFACTURER DZTECH -#define PRODUCT DZ65RGB -#define DESCRIPTION DZ65 ARM RGB keyboard - -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 -#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } -#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14, C15 } -#define DIODE_DIRECTION COL2ROW -#ifdef RGB_MATRIX_ENABLE -#define RGB_MATRIX_LED_PROCESS_LIMIT 4 -#define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DEBOUNCE 3 -#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended -#define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110111 -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 35 -#define DRIVER_2_LED_TOTAL 33 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -#endif
\ No newline at end of file +#include "config_common.h"
\ No newline at end of file diff --git a/keyboards/dztech/dz65rgb/v1/config.h b/keyboards/dztech/dz65rgb/v1/config.h new file mode 100644 index 0000000000..361c27df36 --- /dev/null +++ b/keyboards/dztech/dz65rgb/v1/config.h @@ -0,0 +1,45 @@ +#pragma once +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1222 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH +#define PRODUCT DZ65RGB +#define DESCRIPTION DZ65 ARM RGB keyboard + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 +#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 } +#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14, C15 } +#define DIODE_DIRECTION COL2ROW +#ifdef RGB_MATRIX_ENABLE +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DEBOUNCE 3 +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110111 +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 35 +#define DRIVER_2_LED_TOTAL 33 +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#endif
\ No newline at end of file diff --git a/keyboards/dztech/dz65rgb/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk index 6e80abf472..6e80abf472 100644 --- a/keyboards/dztech/dz65rgb/rules.mk +++ b/keyboards/dztech/dz65rgb/v1/rules.mk diff --git a/keyboards/dztech/dz65rgb/v2/config.h b/keyboards/dztech/dz65rgb/v2/config.h new file mode 100644 index 0000000000..44bf0b7348 --- /dev/null +++ b/keyboards/dztech/dz65rgb/v2/config.h @@ -0,0 +1,45 @@ +#pragma once +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1222 +#define DEVICE_VER 0x0002 +#define MANUFACTURER DZTECH +#define PRODUCT DZ65RGB +#define DESCRIPTION DZ65 AVR RGB keyboard + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 +#define MATRIX_ROW_PINS {F0, F1, F4, E6, C6 } +#define MATRIX_COL_PINS {F7, F6, F5, C7, B0, B1, B2, B3, B4, D7, D6, D4, D5, D3, D2} +#define DIODE_DIRECTION COL2ROW +#ifdef RGB_MATRIX_ENABLE +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 +#define DEBOUNCE 3 +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_MATRIX_KEYPRESSES +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110111 +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 35 +#define DRIVER_2_LED_TOTAL 33 +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#endif diff --git a/keyboards/dztech/dz65rgb/v2/rules.mk b/keyboards/dztech/dz65rgb/v2/rules.mk new file mode 100644 index 0000000000..b0b41a88d6 --- /dev/null +++ b/keyboards/dztech/dz65rgb/v2/rules.mk @@ -0,0 +1,35 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +RGB_MATRIX_ENABLE = yes # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in + +LAYOUTS = 65_ansi
\ No newline at end of file |