summaryrefslogtreecommitdiff
path: root/keyboards/zvecr
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/zvecr')
-rw-r--r--keyboards/zvecr/split_blackpill/config.h30
-rw-r--r--keyboards/zvecr/split_blackpill/info.json3
-rw-r--r--keyboards/zvecr/split_blackpill/rules.mk8
-rw-r--r--keyboards/zvecr/zv48/config.h30
-rw-r--r--keyboards/zvecr/zv48/f401/info.json5
-rw-r--r--keyboards/zvecr/zv48/f401/rules.mk7
-rw-r--r--keyboards/zvecr/zv48/f411/info.json5
-rw-r--r--keyboards/zvecr/zv48/f411/rules.mk6
-rw-r--r--keyboards/zvecr/zv48/info.json1
-rw-r--r--keyboards/zvecr/zv48/rules.mk2
10 files changed, 14 insertions, 83 deletions
diff --git a/keyboards/zvecr/split_blackpill/config.h b/keyboards/zvecr/split_blackpill/config.h
index 3a7873bb74..ef606f5243 100644
--- a/keyboards/zvecr/split_blackpill/config.h
+++ b/keyboards/zvecr/split_blackpill/config.h
@@ -15,7 +15,6 @@
*/
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8 // Rows are doubled-up
@@ -67,40 +66,11 @@
#define WS2812_DMA_STREAM STM32_DMA1_STREAM3
#define WS2812_DMA_CHANNEL 3
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/zvecr/split_blackpill/info.json b/keyboards/zvecr/split_blackpill/info.json
index 4274e29e08..57fc7b2e1c 100644
--- a/keyboards/zvecr/split_blackpill/info.json
+++ b/keyboards/zvecr/split_blackpill/info.json
@@ -8,6 +8,9 @@
"pid": "0x0001",
"device_version": "0.0.1"
},
+ "processor": "STM32F103",
+ "bootloader": "stm32duino",
+ "community_layouts": ["ortho_4x12"],
"layouts": {
"LAYOUT_ortho_4x12": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/zvecr/split_blackpill/rules.mk b/keyboards/zvecr/split_blackpill/rules.mk
index 46a07109fa..c953eea031 100644
--- a/keyboards/zvecr/split_blackpill/rules.mk
+++ b/keyboards/zvecr/split_blackpill/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F103
-
-# Bootloader selection
-BOOTLOADER = stm32duino
-
# Build Options
# change yes to no to disable
#
@@ -21,8 +15,6 @@ SPLIT_KEYBOARD = yes
SERIAL_DRIVER = usart
WS2812_DRIVER = pwm
-LAYOUTS = ortho_4x12
-
# Disable unsupported hardware
AUDIO_SUPPORTED = no
BACKLIGHT_SUPPORTED = no
diff --git a/keyboards/zvecr/zv48/config.h b/keyboards/zvecr/zv48/config.h
index 87ba0ff317..38935d31c1 100644
--- a/keyboards/zvecr/zv48/config.h
+++ b/keyboards/zvecr/zv48/config.h
@@ -15,7 +15,6 @@
*/
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8 // Rows are doubled-up
@@ -73,40 +72,11 @@
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
#define WS2812_DMA_CHANNEL 5
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/zvecr/zv48/f401/info.json b/keyboards/zvecr/zv48/f401/info.json
new file mode 100644
index 0000000000..acd7e83f77
--- /dev/null
+++ b/keyboards/zvecr/zv48/f401/info.json
@@ -0,0 +1,5 @@
+{
+ "processor": "STM32F401",
+ "bootloader": "stm32-dfu",
+ "board": "BLACKPILL_STM32_F401"
+}
diff --git a/keyboards/zvecr/zv48/f401/rules.mk b/keyboards/zvecr/zv48/f401/rules.mk
index 37ee7172f8..4df55cd220 100644
--- a/keyboards/zvecr/zv48/f401/rules.mk
+++ b/keyboards/zvecr/zv48/f401/rules.mk
@@ -1,10 +1,3 @@
-# MCU name
-MCU = STM32F401
-BOARD = BLACKPILL_STM32_F401
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
# Disable unsupported hardware
AUDIO_SUPPORTED = no
BACKLIGHT_SUPPORTED = no
diff --git a/keyboards/zvecr/zv48/f411/info.json b/keyboards/zvecr/zv48/f411/info.json
new file mode 100644
index 0000000000..2517a82403
--- /dev/null
+++ b/keyboards/zvecr/zv48/f411/info.json
@@ -0,0 +1,5 @@
+{
+ "processor": "STM32F411",
+ "bootloader": "stm32-dfu",
+ "board": "BLACKPILL_STM32_F411"
+}
diff --git a/keyboards/zvecr/zv48/f411/rules.mk b/keyboards/zvecr/zv48/f411/rules.mk
index c25a64f4b3..e69de29bb2 100644
--- a/keyboards/zvecr/zv48/f411/rules.mk
+++ b/keyboards/zvecr/zv48/f411/rules.mk
@@ -1,6 +0,0 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
diff --git a/keyboards/zvecr/zv48/info.json b/keyboards/zvecr/zv48/info.json
index 94862b3aee..8ae18b0e49 100644
--- a/keyboards/zvecr/zv48/info.json
+++ b/keyboards/zvecr/zv48/info.json
@@ -8,6 +8,7 @@
"pid": "0x0048",
"device_version": "0.0.1"
},
+ "community_layouts": ["ortho_4x12"],
"layouts": {
"LAYOUT_ortho_4x12": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/zvecr/zv48/rules.mk b/keyboards/zvecr/zv48/rules.mk
index a524934e9f..0db8344a63 100644
--- a/keyboards/zvecr/zv48/rules.mk
+++ b/keyboards/zvecr/zv48/rules.mk
@@ -18,5 +18,3 @@ SERIAL_DRIVER = usart
WS2812_DRIVER = pwm
DEFAULT_FOLDER = zvecr/zv48/f401
-
-LAYOUTS = ortho_4x12
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-21 11:33:51 +0000