summaryrefslogtreecommitdiff
path: root/keyboards/zeal60/rgb_backlight.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/zeal60/rgb_backlight.c')
-rw-r--r--keyboards/zeal60/rgb_backlight.c285
1 files changed, 280 insertions, 5 deletions
diff --git a/keyboards/zeal60/rgb_backlight.c b/keyboards/zeal60/rgb_backlight.c
index 64b95059e1..a965a13bbd 100644
--- a/keyboards/zeal60/rgb_backlight.c
+++ b/keyboards/zeal60/rgb_backlight.c
@@ -15,27 +15,44 @@
*/
#if RGB_BACKLIGHT_ENABLED
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU)
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60)
#else
#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU
#endif
+#ifndef MAX
+ #define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+
+#ifndef MIN
+ #define MIN(a,b) ((a) < (b)? (a): (b))
+#endif
+
#include "quantum.h"
#include "rgb_backlight.h"
#include "rgb_backlight_api.h"
#include "rgb_backlight_keycodes.h"
+#if !defined(RGB_BACKLIGHT_HS60)
#include <avr/io.h>
#include <util/delay.h>
#include <avr/interrupt.h>
+#include "drivers/avr/i2c_master.h"
+#else
+#include "ch.h"
+#include "hal.h"
+#include "drivers/arm/i2c_master.h"
+#include "tmk_core/common/eeprom.h"
+#endif
#include "progmem.h"
-
#include "quantum/color.h"
-#include "drivers/avr/i2c_master.h"
#if defined (RGB_BACKLIGHT_M6_B)
#include "drivers/issi/is31fl3218.h"
#define BACKLIGHT_LED_COUNT 6
+#elif defined (RGB_BACKLIGHT_HS60)
+#include "drivers/issi/is31fl3733.h"
+#define BACKLIGHT_LED_COUNT 64
#else
#include "drivers/issi/is31fl3731.h"
#define BACKLIGHT_LED_COUNT 72
@@ -84,7 +101,88 @@ uint8_t g_key_hit[BACKLIGHT_LED_COUNT];
// Ticks since any key was last hit.
uint32_t g_any_key_hit = 0;
-#if !defined(RGB_BACKLIGHT_M6_B)
+#if defined(RGB_BACKLIGHT_HS60)
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// ADDR_2 is not needed. it is here as a dummy
+#define ISSI_ADDR_1 0x50
+#define ISSI_ADDR_2 0x50
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //LA1
+ {0, E_1, D_1, F_1}, //LA2
+ {0, H_1, G_1, I_1}, //LA3
+ {0, K_1, J_1, L_1}, //LA4
+ {0, B_2, A_2, C_2}, //LA5
+ {0, E_2, D_2, F_2}, //LA6
+ {0, H_2, G_2, I_2}, //LA7
+ {0, K_2, J_2, L_2}, //LA8
+ {0, B_3, A_3, C_3}, //LA9
+ {0, E_3, D_3, F_3}, //LA10
+ {0, H_3, G_3, I_3}, //LA11
+ {0, K_3, J_3, L_3}, //LA12
+ {0, B_4, A_4, C_4}, //LA13
+ {0, E_4, D_4, F_4}, //LA14
+ {0, H_4, G_4, I_4}, //LA15
+ {0, K_4, J_4, L_4}, //LA16
+ {0, B_5, A_5, C_5}, //LA17
+ {0, E_5, D_5, F_5}, //LA18
+ {0, H_5, G_5, I_5}, //LA19
+ {0, K_5, J_5, L_5}, //LA20
+ {0, B_6, A_6, C_6}, //LA21
+ {0, E_6, D_6, F_6}, //LA22
+ {0, H_6, G_6, I_6}, //LA23
+ {0, K_6, J_6, L_6}, //LA24
+ {0, B_7, A_7, C_7}, //LA25
+ {0, E_7, D_7, F_7}, //LA26
+ {0, H_7, G_7, I_7}, //LA27
+ {0, K_7, J_7, L_7}, //LA28
+ {0, B_8, A_8, C_8}, //LA29
+ {0, E_8, D_8, F_8}, //LA30
+ {0, H_8, G_8, I_8}, //LA31
+ {0, K_8, J_8, L_8}, //LA32
+ {0, B_9, A_9, C_9}, //LA33
+ {0, E_9, D_9, F_9}, //LA34
+ {0, H_9, G_9, I_9}, //LA35
+ {0, K_9, J_9, L_9}, //LA36
+ {0, B_10, A_10, C_10}, //LA37
+ {0, E_10, D_10, F_10}, //LA38
+ {0, H_10, G_10, I_10}, //LA39
+ {0, K_10, J_10, L_10}, //LA40
+ {0, B_11, A_11, C_11}, //LA41
+ {0, E_11, D_11, F_11}, //LA42
+ {0, H_11, G_11, I_11}, //LA43
+ {0, K_11, J_11, L_11}, //LA44
+ {0, B_12, A_12, C_12}, //LA45
+ {0, E_12, D_12, F_12}, //LA46
+ {0, H_12, G_12, I_12}, //LA47
+ {0, K_12, J_12, L_12}, //LA48
+ {0, B_13, A_13, C_13}, //LA49
+ {0, E_13, D_13, F_13}, //LA50
+ {0, H_13, G_13, I_13}, //LA51
+ {0, K_13, J_13, L_13}, //LA52
+ {0, B_14, A_14, C_14}, //LA53
+ {0, E_14, D_14, F_14}, //LA54
+ {0, H_14, G_14, I_14}, //LA55
+ {0, K_14, J_14, L_14}, //LA56
+ {0, B_15, A_15, C_15}, //LA57
+ {0, E_15, D_15, F_15}, //LA58
+ {0, H_15, G_15, I_15}, //LA59
+ {0, K_15, J_15, L_15}, //LA60
+ {0, B_16, A_16, C_16}, //LA61
+ {0, E_16, D_16, F_16}, //LA62
+ {0, H_16, G_16, I_16}, //LA63
+ {0, K_16, J_16, L_16}, //LA64
+};
+
+#elif !defined(RGB_BACKLIGHT_M6_B)
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
#define ISSI_ADDR_1 0x74
@@ -272,6 +370,85 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
{0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
{195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA47
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA47
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
+};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {180,64}, {200,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255},
+ {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {214,255}, {219,255}
+};
+#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA50
+ {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0},
+ {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16},
+ {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16},
+ {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA50
+ {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255},
+ {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129},
+ {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101},
+ {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
+};
#elif defined (RGB_BACKLIGHT_M6_B)
// M6-B is really simple:
// 0 3 5
@@ -397,6 +574,48 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
{ 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
{ 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 }
+};
+#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
#elif defined (RGB_BACKLIGHT_M6_B)
// M6-B is really simple:
// 0 3 5
@@ -419,6 +638,9 @@ void backlight_update_pwm_buffers(void)
{
#if defined (RGB_BACKLIGHT_M6_B)
IS31FL3218_update_pwm_buffers();
+#elif defined (RGB_BACKLIGHT_HS60)
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
#else
IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
@@ -429,6 +651,8 @@ void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
{
#if defined (RGB_BACKLIGHT_M6_B)
IS31FL3218_set_color( index, red, green, blue );
+#elif defined (RGB_BACKLIGHT_HS60)
+ IS31FL3733_set_color( index, red, green, blue );
#else
IS31FL3731_set_color( index, red, green, blue );
#endif
@@ -438,6 +662,8 @@ void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
{
#if defined (RGB_BACKLIGHT_M6_B)
IS31FL3218_set_color_all( red, green, blue );
+#elif defined (RGB_BACKLIGHT_HS60)
+ IS31FL3733_set_color_all( red, green, blue );
#else
IS31FL3731_set_color_all( red, green, blue );
#endif
@@ -452,6 +678,7 @@ void backlight_set_key_hit(uint8_t row, uint8_t column)
g_any_key_hit = 0;
}
+#if !defined(RGB_BACKLIGHT_HS60)
// This is (F_CPU/1024) / 20 Hz
// = 15625 Hz / 20 Hz
// = 781
@@ -487,6 +714,29 @@ void backlight_timer_disable(void)
{
TIMSK3 &= ~_BV(OCIE3A);
}
+#else //STM32, use GPT with TIM4. Enable in halconf.h
+static void gpt_backlight_timer_task(GPTDriver *gptp);
+// Timer setup at 200Khz, callback at 10k ticks = 20Hz
+static GPTConfig gpt4cfg1 = {
+ .frequency = 200000U,
+ .callback = gpt_backlight_timer_task
+};
+
+void backlight_timer_init(void)
+{
+ gptStart(&GPTD4, &gpt4cfg1);
+}
+
+void backlight_timer_enable(void)
+{
+ gptStartContinuous(&GPTD4, 10000);
+}
+
+void backlight_timer_disable(void)
+{
+ gptStopTimer(&GPTD4);
+}
+#endif //!defined(RGB_BACKLIGHT_HS60)
void backlight_set_suspend_state(bool state)
{
@@ -921,7 +1171,11 @@ void backlight_effect_indicators(void)
}
}
+#if !defined(RGB_BACKLIGHT_HS60)
ISR(TIMER3_COMPA_vect)
+#else //STM32 interrupt
+static void gpt_backlight_timer_task(GPTDriver *gptp)
+#endif
{
// delay 1 second before driving LEDs or doing anything else
static uint8_t startup_tick = 0;
@@ -1378,6 +1632,27 @@ void backlight_init_drivers(void)
#if defined(RGB_BACKLIGHT_M6_B)
IS31FL3218_init();
+#elif defined(RGB_BACKLIGHT_HS60)
+ IS31FL3733_init( ISSI_ADDR_1 );
+
+ for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ )
+ {
+#if defined (HS60_ANSI)
+ bool enabled = !( ( index == 48-1 ) || //LA48
+ ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#elif defined (HS60_HHKB)
+ bool enabled = !( ( index == 61-1 ) || //LA61
+ ( index == 62-1 ) ); //LA62
+#else //HS60_ISO
+ bool enabled = !( ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#endif
+ // This only caches it for later
+ IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ // This actually updates the LED drivers
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
#else
IS31FL3731_init( ISSI_ADDR_1 );
IS31FL3731_init( ISSI_ADDR_2 );
@@ -1668,7 +1943,6 @@ void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
}
}
}
-#endif // defined(RGB_DEBUGGING_ONLY)
void backlight_debug_led( bool state )
{
@@ -1685,5 +1959,6 @@ void backlight_debug_led( bool state )
PORTE &= ~(1<<6);
}
}
+#endif // defined(RGB_DEBUGGING_ONLY)
#endif // BACKLIGHT_ENABLED
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 13:37:02 +0000