diff options
Diffstat (limited to 'keyboards/ymdk_np21/config.h')
| -rw-r--r-- | keyboards/ymdk_np21/config.h | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h deleted file mode 100644 index 83423792b0..0000000000 --- a/keyboards/ymdk_np21/config.h +++ /dev/null @@ -1,141 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x594D // "YM" -#define PRODUCT_ID 0x5021 // "P" 21 -#define DEVICE_VER 0x0200 -#define MANUFACTURER YMDK -#define PRODUCT NP21 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 6 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5 } - -/* COL2ROW, ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -#define LED_NUM_LOCK_PIN D0 - -#define BACKLIGHT_PIN D4 -#define BACKLIGHT_LEVELS 12 -#define BACKLIGHT_BREATHING - -#define RGBLED_NUM 5 -//#define RGBLIGHT_HUE_STEP 8 -//#define RGBLIGHT_SAT_STEP 8 -//#define RGBLIGHT_VAL_STEP 8 -//#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ -#define RGBLIGHT_ANIMATIONS -/*== or choose animations ==*/ -//#define RGBLIGHT_EFFECT_BREATHING -//#define RGBLIGHT_EFFECT_RAINBOW_MOOD -//#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -//#define RGBLIGHT_EFFECT_SNAKE -//#define RGBLIGHT_EFFECT_KNIGHT -//#define RGBLIGHT_EFFECT_CHRISTMAS -//#define RGBLIGHT_EFFECT_STATIC_GRADIENT -//#define RGBLIGHT_EFFECT_RGB_TEST -//#define RGBLIGHT_EFFECT_ALTERNATING -/*== customize breathing effect ==*/ -/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ -//#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 -/*==== use exp() and sin() ====*/ -//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 -//#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is useful for the Windows task manager shortcut (ctrl+shift+esc). - */ -//#define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT - -/* disable these deprecated features by default */ -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - -/* Bootmagic Lite key configuration */ -//#define BOOTMAGIC_LITE_ROW 0 -//#define BOOTMAGIC_LITE_COLUMN 0 - -#define USB_MAX_POWER_CONSUMPTION 100 |