1 files changed, 71 insertions, 0 deletions
diff --git a/keyboards/woodkeys/meira/TWIlib.h b/keyboards/woodkeys/meira/TWIlib.h
new file mode 100755
index 0000000000..8ba261c6e5
--- /dev/null
+++ b/keyboards/woodkeys/meira/TWIlib.h
@@ -0,0 +1,71 @@
+/*
+ * TWIlib.h
+ *
+ * Created: 6/01/2014 10:38:42 PM
+ *  Author: Chris Herring
+ */
+
+
+#ifndef TWILIB_H_
+#define TWILIB_H_
+// TWI bit rate
+#define TWI_FREQ 400000
+// Get TWI status
+#define TWI_STATUS	(TWSR & 0xF8)
+// Transmit buffer length
+#define TXMAXBUFLEN 20
+// Receive buffer length
+#define RXMAXBUFLEN 20
+
+typedef enum {
+	Ready,
+	Initializing,
+	RepeatedStartSent,
+	MasterTransmitter,
+	MasterReceiver,
+	SlaceTransmitter,
+	SlaveReciever
+	} TWIMode;
+
+ typedef struct TWIInfoStruct{
+	TWIMode mode;
+	uint8_t errorCode;
+	uint8_t repStart;
+	}TWIInfoStruct;
+
+extern TWIInfoStruct TWIInfo;
+
+// TWI Status Codes
+#define TWI_START_SENT			0x08 // Start sent
+#define TWI_REP_START_SENT		0x10 // Repeated Start sent
+// Master Transmitter Mode
+#define TWI_MT_SLAW_ACK			0x18 // SLA+W sent and ACK received
+#define TWI_MT_SLAW_NACK		0x20 // SLA+W sent and NACK received
+#define TWI_MT_DATA_ACK			0x28 // DATA sent and ACK received
+#define TWI_MT_DATA_NACK		0x30 // DATA sent and NACK received
+// Master Receiver Mode
+#define TWI_MR_SLAR_ACK			0x40 // SLA+R sent, ACK received
+#define TWI_MR_SLAR_NACK		0x48 // SLA+R sent, NACK received
+#define TWI_MR_DATA_ACK			0x50 // Data received, ACK returned
+#define TWI_MR_DATA_NACK		0x58 // Data received, NACK returned
+
+// Miscellaneous States
+#define TWI_LOST_ARBIT			0x38 // Arbitration has been lost
+#define TWI_NO_RELEVANT_INFO	0xF8 // No relevant information available
+#define TWI_ILLEGAL_START_STOP	0x00 // Illegal START or STOP condition has been detected
+#define TWI_SUCCESS				0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only
+
+
+#define TWISendStart()		(TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer.
+#define TWISendStop()		(TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag.
+#define TWISendTransmit()	(TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled.
+#define TWISendACK()		(TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte.
+#define TWISendNACK()		(TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte.
+
+// Function declarations
+void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking);
+void TWIInit(void);
+uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart);
+uint8_t isTWIReady(void);
+
+#endif // TWICOMMS_H_
+\ No newline at end of file