diff options
Diffstat (limited to 'keyboards/wilba_tech/zeal60')
5 files changed, 12 insertions, 109 deletions
diff --git a/keyboards/wilba_tech/zeal60/config.h b/keyboards/wilba_tech/zeal60/config.h index b3c0477342..eaf7b76504 100644 --- a/keyboards/wilba_tech/zeal60/config.h +++ b/keyboards/wilba_tech/zeal60/config.h @@ -27,7 +27,7 @@ // IS31FL3731 driver #define DRIVER_COUNT 2 -#define DRIVER_LED_TOTAL 72 +#define RGB_MATRIX_LED_COUNT 72 // COL2ROW or ROW2COL #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/wilba_tech/zeal60/keymaps/ryanmaclean/config.h b/keyboards/wilba_tech/zeal60/keymaps/ryanmaclean/config.h deleted file mode 100644 index f1531eb345..0000000000 --- a/keyboards/wilba_tech/zeal60/keymaps/ryanmaclean/config.h +++ /dev/null @@ -1,21 +0,0 @@ -#pragma once - -/* enable/disable LEDs based on layout */ -#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE -#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 - -#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT -#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 - -#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT -#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 - -#undef RGB_BACKLIGHT_USE_7U_SPACEBAR -#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 - -#undef RGB_BACKLIGHT_USE_ISO_ENTER -#define RGB_BACKLIGHT_USE_ISO_ENTER 0 - -#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS -#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 - diff --git a/keyboards/wilba_tech/zeal60/keymaps/ryanmaclean/keymap.c b/keyboards/wilba_tech/zeal60/keymaps/ryanmaclean/keymap.c deleted file mode 100644 index 2e342b497c..0000000000 --- a/keyboards/wilba_tech/zeal60/keymaps/ryanmaclean/keymap.c +++ /dev/null @@ -1,84 +0,0 @@ -// Ryan MacLean's layout for Zeal60 -// Note that LGUI and RGUI are swapped with LALT and RALT respectively, for use with Macs -// Also note that Control has replaced Caps Lock, and that pressing left or right shift once -// will output left parenthese and right parenthese respectively. -#include QMK_KEYBOARD_H - -// [0,13] is either left key of split backspace (e.g. HHKB \| key) or 2U backspace -// [1,13] is either backslash or ISO Enter -// [2,12] is either ANSI Enter or key left of ISO Enter -// [2,13] is right key of split backspace (e.g. HHKB `~ key) -// [3,1] is right key of split left-shift (e.g ISO key) -// [3,13] is right key of split right-shift (e.g. HHKB Fn key) - - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. KC_LSFT KC_LALT KC_LGUI KC_4 -{ - switch(id) { - case 0: // macOS screenshot to capture are to clipboard - this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( D(LSFT), D(LCTL), D(LGUI), T(4), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes - } - break; - case 1: // macOS screenshot capture area to file - this would trigger when you hit a key mapped as M(1) - if (record->event.pressed) { - return MACRO( D(LSFT), D(LGUI), T(4), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes - } - break; - case 2: // macOS screenshot to clipboard - this would trigger when you hit a key mapped as M(2) - if (record->event.pressed) { - return MACRO( D(LSFT), D(LCTL), D(LGUI), T(3), U(LSFT), U(LCTL), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes - } - break; - case 3: // macOS screenshot to file - this would trigger when you hit a key mapped as M(3) - if (record->event.pressed) { - return MACRO( D(LSFT), D(LGUI), T(3), U(LSFT), U(LGUI), W(255), END ); // this sends the string 'hello' when the macro executes - } - break; - } - return MACRO_NONE; -}; - -#define CADETL MT(KC_LSFT, KC_LBRC) -#define CADETR MT(KC_RSFT, KC_RBRC) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -// Default layer -[0] = { - {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS}, - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC}, - {KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_GRV}, - {KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, FN_MO13}, - {KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_SPC, KC_NO, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, FN_MO23} -}, - -// Fn1 Layer -[1] = { - {KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS}, - {KC_CAPS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL}, - {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} -}, - -// Fn2 Layer -[2] = { - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, M(2), M(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, M(1), M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} -}, - -// Fn3 Layer (zeal60 Configuration) -[3] = { - {KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}, - {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} -} - -}; diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md index edddf1c58f..8688892e59 100644 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md +++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md @@ -37,7 +37,6 @@ You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7 ```c // Set up RGB underglow. #define RGB_DI_PIN B0 // The pin your RGB strip is wired to - #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 35 // Number of LEDs #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat @@ -77,4 +76,4 @@ USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide * [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG) * [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2) * [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954) -* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7)
\ No newline at end of file +* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7) diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h index 64aaece501..b106ebc181 100644 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h +++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h @@ -21,7 +21,16 @@ // Set up RGB underglow. #define RGB_DI_PIN B0 // The pin your RGB strip is wired to -#define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE #define RGBLED_NUM 35 // Number of LEDs #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat |