diff options
Diffstat (limited to 'keyboards/wilba_tech/wt8_a')
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/config.h | 115 | ||||
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/info.json | 13 | ||||
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c | 16 | ||||
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/readme.md | 15 | ||||
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/rules.mk | 68 | ||||
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/wt8_a.c | 17 | ||||
| -rw-r--r-- | keyboards/wilba_tech/wt8_a/wt8_a.h | 27 |
7 files changed, 271 insertions, 0 deletions
diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h new file mode 100644 index 0000000000..1c8522a1b5 --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/config.h @@ -0,0 +1,115 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6582 // wilba.tech +#define PRODUCT_ID 0x008A // 8-A +#define DEVICE_VER 0x0001 +#define MANUFACTURER wilba.tech +#define PRODUCT wilba.tech WT8-A +#define DESCRIPTION wilba.tech WT8-A + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { E6 } +#define MATRIX_COL_PINS { F4, F1, B2, B6, F6, F7, D5, B4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +// Does not use WT_MONO_BACKLIGHT +// #define WT_MONO_BACKLIGHT + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 + +// EEPROM usage + +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x08 +#define EEPROM_VERSION_ADDR 34 + +// Dynamic keymap starts after EEPROM version +#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 +// Dynamic macro starts after dynamic keymaps (35+(4*1*8*2)) = (35+64) +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 99 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 925 +#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/wilba_tech/wt8_a/info.json b/keyboards/wilba_tech/wt8_a/info.json new file mode 100644 index 0000000000..c40d44db72 --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "wilba.tech WT8-A", + "url": "https://wilba.tech", + "maintainer": "Wilba", + "bootloader": "atmel-dfu", + "width": 4, + "height": 2, + "layouts": { + "LAYOUT": { + "layout": [{"label":"x", "x":0, "y":0}, {"label":"x", "x":1, "y":0}, {"label":"x", "x":2, "y":0}, {"label":"x", "x":3, "y":0}, {"label":"x", "x":0, "y":1}, {"label":"x", "x":1, "y":1}, {"label":"x", "x":2, "y":1}, {"label":"x", "x":3, "y":1}] + } + } +}
\ No newline at end of file diff --git a/keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c b/keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c new file mode 100644 index 0000000000..a9f40362c7 --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/keymaps/default/keymap.c @@ -0,0 +1,16 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8 ), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO) }; + diff --git a/keyboards/wilba_tech/wt8_a/readme.md b/keyboards/wilba_tech/wt8_a/readme.md new file mode 100644 index 0000000000..ab3cfdc55b --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/readme.md @@ -0,0 +1,15 @@ +# WILBA.TECH WT8-A + + + +WT8-A is an 8-key macropad PCB, designed for the Singa Ocelot. [More info at wilba.tech](https://wilba.tech/) + +Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) +Hardware Supported: WILBA.TECH WT8-A +Hardware Availability: Singa Keyboards + +Make example for this keyboard (after setting up your build environment): + + make wilba_tech/wt8_a:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk new file mode 100644 index 0000000000..f072c67198 --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/rules.mk @@ -0,0 +1,68 @@ +# project specific files +SRC = keyboards/wilba_tech/wt_main.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section +BOOTLOADER = atmel-dfu + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/wilba_tech/wt8_a/wt8_a.c b/keyboards/wilba_tech/wt8_a/wt8_a.c new file mode 100644 index 0000000000..ccff6d62c9 --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/wt8_a.c @@ -0,0 +1,17 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +// Nothing to see here, move along... ;-) diff --git a/keyboards/wilba_tech/wt8_a/wt8_a.h b/keyboards/wilba_tech/wt8_a/wt8_a.h new file mode 100644 index 0000000000..0fb754f0ab --- /dev/null +++ b/keyboards/wilba_tech/wt8_a/wt8_a.h @@ -0,0 +1,27 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07 ) \ + { \ + {K00, K01, K02, K03, K04, K05, K06, K07 }, \ + } |