21 files changed, 14 insertions, 160 deletions
diff --git a/keyboards/viktus/at101_bh/config.h b/keyboards/viktus/at101_bh/config.h
index 9842d0ca6c..d170aebdd8 100644
--- a/keyboards/viktus/at101_bh/config.h
+++ b/keyboards/viktus/at101_bh/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 12
@@ -13,9 +12,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/viktus/at101_bh/info.json b/keyboards/viktus/at101_bh/info.json
index a5ef9d4ca2..aebfd08f0f 100644
--- a/keyboards/viktus/at101_bh/info.json
+++ b/keyboards/viktus/at101_bh/info.json
@@ -8,6 +8,8 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "halfkay",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/viktus/at101_bh/rules.mk b/keyboards/viktus/at101_bh/rules.mk
index 16dc2697bb..06845b8e21 100644
--- a/keyboards/viktus/at101_bh/rules.mk
+++ b/keyboards/viktus/at101_bh/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/viktus/omnikey_bh/config.h b/keyboards/viktus/omnikey_bh/config.h
index 7fe3563de8..eb88a1c58f 100644
--- a/keyboards/viktus/omnikey_bh/config.h
+++ b/keyboards/viktus/omnikey_bh/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -13,9 +12,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/viktus/omnikey_bh/info.json b/keyboards/viktus/omnikey_bh/info.json
index c7ddd64e87..e4730b2031 100644
--- a/keyboards/viktus/omnikey_bh/info.json
+++ b/keyboards/viktus/omnikey_bh/info.json
@@ -8,6 +8,8 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
+  "processor": "at90usb1286",
+  "bootloader": "halfkay",
   "layouts": {
     "LAYOUT": {
       "layout": [{"label":"K000", "x":0, "y":0}, {"label":"K001", "x":1, "y":0}, {"label":"K002", "x":2.5, "y":0}, {"label":"K003", "x":4.5, "y":0}, {"label":"K004", "x":5.5, "y":0}, {"label":"K005", "x":6.5, "y":0}, {"label":"K006", "x":7.5, "y":0}, {"label":"K007", "x":9, "y":0}, {"label":"K008", "x":10, "y":0}, {"label":"K009", "x":11, "y":0}, {"label":"K010", "x":12, "y":0}, {"label":"K011", "x":13.5, "y":0}, {"label":"K012", "x":14.5, "y":0}, {"label":"K013", "x":15.5, "y":0}, {"label":"K014", "x":16.5, "y":0}, {"label":"K015", "x":18, "y":0}, {"label":"K016", "x":19, "y":0}, {"label":"K017", "x":20, "y":0}, {"label":"K100", "x":0, "y":1.5}, {"label":"K101", "x":1, "y":1.5}, {"label":"K102", "x":2.5, "y":1.5}, {"label":"K103", "x":3.5, "y":1.5}, {"label":"K104", "x":4.5, "y":1.5}, {"label":"K105", "x":5.5, "y":1.5}, {"label":"K106", "x":6.5, "y":1.5}, {"label":"K107", "x":7.5, "y":1.5}, {"label":"K108", "x":8.5, "y":1.5}, {"label":"K109", "x":9.5, "y":1.5}, {"label":"K110", "x":10.5, "y":1.5}, {"label":"K111", "x":11.5, "y":1.5}, {"label":"K112", "x":12.5, "y":1.5}, {"label":"K113", "x":13.5, "y":1.5}, {"label":"K114", "x":14.5, "y":1.5}, {"label":"K115", "x":15.5, "y":1.5, "w":2}, {"label":"K116", "x":18, "y":1.5}, {"label":"K117", "x":19, "y":1.5}, {"label":"K118", "x":20, "y":1.5}, {"label":"K119", "x":21.5, "y":1.5}, {"label":"K120", "x":22.5, "y":1.5}, {"label":"K121", "x":23.5, "y":1.5}, {"label":"K122", "x":24.5, "y":1.5}, {"label":"K200", "x":0, "y":2.5}, {"label":"K201", "x":1, "y":2.5}, {"label":"K202", "x":2.5, "y":2.5, "w":1.5}, {"label":"K203", "x":4, "y":2.5}, {"label":"K204", "x":5, "y":2.5}, {"label":"K205", "x":6, "y":2.5}, {"label":"K206", "x":7, "y":2.5}, {"label":"K207", "x":8, "y":2.5}, {"label":"K208", "x":9, "y":2.5}, {"label":"K209", "x":10, "y":2.5}, {"label":"K210", "x":11, "y":2.5}, {"label":"K211", "x":12, "y":2.5}, {"label":"K212", "x":13, "y":2.5}, {"label":"K213", "x":14, "y":2.5}, {"label":"K214", "x":15, "y":2.5}, {"label":"K215", "x":16, "y":2.5, "w":1.5}, {"label":"K216", "x":18, "y":2.5}, {"label":"K217", "x":19, "y":2.5}, {"label":"K218", "x":20, "y":2.5}, {"label":"K219", "x":21.5, "y":2.5}, {"label":"K220", "x":22.5, "y":2.5}, {"label":"K221", "x":23.5, "y":2.5}, {"label":"K222", "x":24.5, "y":2.5}, {"label":"K300", "x":0, "y":3.5}, {"label":"K301", "x":1, "y":3.5}, {"label":"K302", "x":2.5, "y":3.5, "w":1.75}, {"label":"K303", "x":4.25, "y":3.5}, {"label":"K304", "x":5.25, "y":3.5}, {"label":"K305", "x":6.25, "y":3.5}, {"label":"K306", "x":7.25, "y":3.5}, {"label":"K307", "x":8.25, "y":3.5}, {"label":"K308", "x":9.25, "y":3.5}, {"label":"K309", "x":10.25, "y":3.5}, {"label":"K310", "x":11.25, "y":3.5}, {"label":"K311", "x":12.25, "y":3.5}, {"label":"K312", "x":13.25, "y":3.5}, {"label":"K313", "x":14.25, "y":3.5}, {"label":"K314", "x":15.25, "y":3.5, "w":2.25}, {"label":"K315", "x":18, "y":3.5}, {"label":"K316", "x":19, "y":3.5}, {"label":"K317", "x":20, "y":3.5}, {"label":"K318", "x":21.5, "y":3.5}, {"label":"K319", "x":22.5, "y":3.5}, {"label":"K320", "x":23.5, "y":3.5}, {"label":"K321", "x":24.5, "y":3.5}, {"label":"K400", "x":0, "y":4.5}, {"label":"K401", "x":1, "y":4.5}, {"label":"K402", "x":2.5, "y":4.5, "w":2.25}, {"label":"K403", "x":4.75, "y":4.5}, {"label":"K404", "x":5.75, "y":4.5}, {"label":"K405", "x":6.75, "y":4.5}, {"label":"K406", "x":7.75, "y":4.5}, {"label":"K407", "x":8.75, "y":4.5}, {"label":"K408", "x":9.75, "y":4.5}, {"label":"K409", "x":10.75, "y":4.5}, {"label":"K410", "x":11.75, "y":4.5}, {"label":"K411", "x":12.75, "y":4.5}, {"label":"K412", "x":13.75, "y":4.5}, {"label":"K413", "x":14.75, "y":4.5, "w":1.75}, {"label":"K414", "x":16.5, "y":4.5}, {"label":"K415", "x":18, "y":4.5}, {"label":"K416", "x":19, "y":4.5}, {"label":"K417", "x":20, "y":4.5}, {"label":"K418", "x":21.5, "y":4.5}, {"label":"K419", "x":22.5, "y":4.5}, {"label":"K420", "x":23.5, "y":4.5}, {"label":"K421", "x":24.5, "y":4.5, "h":2}, {"label":"K500", "x":0, "y":5.5}, {"label":"K501", "x":1, "y":5.5}, {"label":"K502", "x":2.5, "y":5.5, "w":1.5}, {"label":"K503", "x":4, "y":5.5}, {"label":"K504", "x":5, "y":5.5, "w":1.5}, {"label":"K507", "x":6.5, "y":5.5, "w":7}, {"label":"K512", "x":13.5, "y":5.5}, {"label":"K513", "x":14.5, "y":5.5}, {"label":"K514", "x":15.5, "y":5.5}, {"label":"K515", "x":16.5, "y":5.5}, {"label":"K516", "x":18, "y":5.5}, {"label":"K517", "x":19, "y":5.5}, {"label":"K518", "x":20, "y":5.5}, {"label":"K519", "x":21.5, "y":5.5, "w":2}, {"label":"K520", "x":23.5, "y":5.5}]
diff --git a/keyboards/viktus/omnikey_bh/rules.mk b/keyboards/viktus/omnikey_bh/rules.mk
index 65e353ad15..06845b8e21 100644
--- a/keyboards/viktus/omnikey_bh/rules.mk
+++ b/keyboards/viktus/omnikey_bh/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = at90usb1286
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/viktus/smolka/config.h b/keyboards/viktus/smolka/config.h
index fe081689b3..ecbc354ed6 100644
--- a/keyboards/viktus/smolka/config.h
+++ b/keyboards/viktus/smolka/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 8
@@ -39,14 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
@@ -57,32 +48,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define ENCODER_RESOLUTIONS { 4, 2 }
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/viktus/smolka/info.json b/keyboards/viktus/smolka/info.json
index 2ee502bd37..6627cbfb2e 100644
--- a/keyboards/viktus/smolka/info.json
+++ b/keyboards/viktus/smolka/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0010",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/viktus/smolka/rules.mk b/keyboards/viktus/smolka/rules.mk
index 5f58c5684b..131aa72aeb 100644
--- a/keyboards/viktus/smolka/rules.mk
+++ b/keyboards/viktus/smolka/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/viktus/sp111/config.h b/keyboards/viktus/sp111/config.h
index 2e2d0a7020..de69834902 100644
--- a/keyboards/viktus/sp111/config.h
+++ b/keyboards/viktus/sp111/config.h
@@ -15,46 +15,16 @@
  */
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 6*2
 #define MATRIX_COLS 11
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/viktus/sp111/info.json b/keyboards/viktus/sp111/info.json
index c438b91e25..1ac5d4802a 100644
--- a/keyboards/viktus/sp111/info.json
+++ b/keyboards/viktus/sp111/info.json
@@ -8,6 +8,8 @@
         "pid": "0x5111",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/viktus/sp111/rules.mk b/keyboards/viktus/sp111/rules.mk
index fab90d4a88..0b9b8490de 100644
--- a/keyboards/viktus/sp111/rules.mk
+++ b/keyboards/viktus/sp111/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/viktus/sp_mini/config.h b/keyboards/viktus/sp_mini/config.h
index c26afa9684..1979464423 100644
--- a/keyboards/viktus/sp_mini/config.h
+++ b/keyboards/viktus/sp_mini/config.h
@@ -18,7 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 // Rows are doubled-up
@@ -40,13 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 #define USE_I2C
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN E6
 #define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/viktus/sp_mini/info.json b/keyboards/viktus/sp_mini/info.json
index ec63304eff..b84a224bce 100644
--- a/keyboards/viktus/sp_mini/info.json
+++ b/keyboards/viktus/sp_mini/info.json
@@ -8,6 +8,8 @@
         "pid": "0x534D",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [
diff --git a/keyboards/viktus/sp_mini/rules.mk b/keyboards/viktus/sp_mini/rules.mk
index 92d4b71efe..ca2a1036c3 100644
--- a/keyboards/viktus/sp_mini/rules.mk
+++ b/keyboards/viktus/sp_mini/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/viktus/styrka/config.h b/keyboards/viktus/styrka/config.h
index 118dafb1f7..f82cac87e3 100644
--- a/keyboards/viktus/styrka/config.h
+++ b/keyboards/viktus/styrka/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 10
@@ -45,43 +44,11 @@ B0, which is unconnected on the PCB
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/viktus/styrka/info.json b/keyboards/viktus/styrka/info.json
index c1c161e5f4..6bad0166c0 100644
--- a/keyboards/viktus/styrka/info.json
+++ b/keyboards/viktus/styrka/info.json
@@ -8,6 +8,8 @@
     "pid": "0x0001",
     "device_version": "0.0.1"
   },
+  "processor": "STM32F072",
+  "bootloader": "stm32-dfu",
   "layouts": {
     "LAYOUT_default": {
       "layout": [{"label":"F1", "x":0, "y":0}, {"label":"MO(1)", "x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Backspace", "x":15.25, "y":0, "w":2}, {"label":"Insert", "x":17.25, "y":0}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"|", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"PgUp", "x":17.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":2.25}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"PgDn", "x":17.25, "y":3}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.25}, {"label":"Win", "x":3.5, "y":4, "w":1.25}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":6.25}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.25}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}]
diff --git a/keyboards/viktus/styrka/rules.mk b/keyboards/viktus/styrka/rules.mk
index a0b213f847..718a1e8d09 100644
--- a/keyboards/viktus/styrka/rules.mk
+++ b/keyboards/viktus/styrka/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F072
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/viktus/z150_bh/config.h b/keyboards/viktus/z150_bh/config.h
index b91b3b4199..d531834b48 100644
--- a/keyboards/viktus/z150_bh/config.h
+++ b/keyboards/viktus/z150_bh/config.h
@@ -1,6 +1,5 @@
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -17,9 +16,6 @@
 #define LED_CAPS_LOCK_PIN B0
 #define LED_SCROLL_LOCK_PIN E6
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/viktus/z150_bh/info.json b/keyboards/viktus/z150_bh/info.json
index 0c471fd1ea..a44c903b05 100644
--- a/keyboards/viktus/z150_bh/info.json
+++ b/keyboards/viktus/z150_bh/info.json
@@ -8,6 +8,8 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "processor": "at90usb1286",
+    "bootloader": "halfkay",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/viktus/z150_bh/rules.mk b/keyboards/viktus/z150_bh/rules.mk
index 65e353ad15..06845b8e21 100644
--- a/keyboards/viktus/z150_bh/rules.mk
+++ b/keyboards/viktus/z150_bh/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = at90usb1286
-
-# Bootloader selection
-BOOTLOADER = halfkay
-
 # Build Options
 #   change yes to no to disable
 #