3 files changed, 2 insertions, 40 deletions
diff --git a/keyboards/tmo50/config.h b/keyboards/tmo50/config.h
index 94e730b9cb..5ed8850ab5 100644
--- a/keyboards/tmo50/config.h
+++ b/keyboards/tmo50/config.h
@@ -17,7 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -39,7 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* number of backlight levels */
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
@@ -64,43 +62,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/tmo50/info.json b/keyboards/tmo50/info.json
index 04e2d5bdc1..24d9e8296a 100644
--- a/keyboards/tmo50/info.json
+++ b/keyboards/tmo50/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0050",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"label":"", "x":0, "y":0}, {"label":"", "x":1.25, "y":0}, {"label":"", "x":2.25, "y":0}, {"label":"", "x":3.25, "y":0}, {"label":"", "x":4.25, "y":0}, {"label":"", "x":5.25, "y":0}, {"label":"", "x":6.25, "y":0}, {"label":"", "x":7.25, "y":0}, {"label":"", "x":8.25, "y":0}, {"label":"", "x":9.25, "y":0}, {"label":"", "x":10.25, "y":0}, {"label":"", "x":11.25, "y":0}, {"label":"", "x":12.25, "y":0}, {"label":"", "x":13.25, "y":0}, {"label":"", "x":14.25, "y":0}, {"x":0, "y":1}, {"label":"Ctrl", "x":1.25, "y":1, "w":1.25}, {"label":"", "x":2.5, "y":1}, {"label":"", "x":3.5, "y":1}, {"label":"", "x":4.5, "y":1}, {"label":"", "x":5.5, "y":1}, {"label":"", "x":6.5, "y":1}, {"label":"", "x":7.5, "y":1}, {"label":"", "x":8.5, "y":1}, {"label":"", "x":9.5, "y":1}, {"label":"", "x":10.5, "y":1}, {"label":"", "x":11.5, "y":1}, {"label":"", "x":12.5, "y":1}, {"label":"Enter", "x":13.5, "y":1, "w":1.75}, {"x":0, "y":2}, {"label":"Shift", "x":1.25, "y":2, "w":1.75}, {"label":"", "x":3, "y":2}, {"label":"", "x":4, "y":2}, {"label":"", "x":5, "y":2}, {"label":"", "x":6, "y":2}, {"label":"b", "x":7, "y":2}, {"label":"", "x":8, "y":2}, {"label":"m", "x":9, "y":2}, {"label":"", "x":10, "y":2}, {"label":"", "x":11, "y":2}, {"label":"", "x":12, "y":2}, {"label":"Shift", "x":13, "y":2, "w":1.25}, {"label":"", "x":14.25, "y":2}, {"x":0, "y":3}, {"label":"Alt", "x":2.75, "y":3}, {"label":"Win", "x":3.75, "y":3, "w":1.5}, {"label":"", "x":5.25, "y":3, "w":2.25}, {"label":"", "x":7.5, "y":3, "w":2.75}, {"label":"AltGr", "x":10.25, "y":3, "w":1.5}, {"label":"L3", "x":11.75, "y":3}]
diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk
index 38f81fd4dc..1955f1d315 100644
--- a/keyboards/tmo50/rules.mk
+++ b/keyboards/tmo50/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #